Used machining centers (vertical) X-axis travel 800-999mm for sale (178)

Condition: ready for operation (used), Year of construction: 2008, travel distance X-axis: 800 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 500 mm, controller manufacturer: HEIDENHAIN, controller model: iTNC 530 with smarT.NC, total height: 2,800 mm, total width: 2,250 mm, table width: 920 mm, table length: 900 mm, table load: 1,800 kg, overall weight: 14,000 kg, spindle speed (max.): 12,000 rpm, spindle motor power: 40,000 W, number of axes: 3, This 3-axis Alzmetall GS 800/3 vertical machining centre was manufactured in 2008. It features an impressive X-axis travel of 800 mm, Y-axis travel of 800 mm, and Z-axis travel of 500 mm. The machine is equipped with a HEIDENHAIN iTNC 530 control and a robust table surface area of 920 x 900 mm, supporting a maximum table load of 1,800 kg. If you are looking to get high-quality machining capabilities, consider the Alzmetall GS 800/3 machine we have for sale. Contact us for further details. Dcodpfx Aisz R Sz Eszep - Distance Spindle to Rigid Table: 150 – 650 mm - Table T-Slots: 9 T-slots according to DIN 650 in X-direction, 14 H12 width, 100 mm pitch, 14 H7 center alignment slot, table lowered by 80 mm - Spindle Type: Water-cooled high-frequency motor spindle with hybrid spindle bearings and oil-air lubrication - Spindle Taper: HSK-A63 according to DIN 69893 -- Max. Torque: 139 Nm at 25% duty cycle - Spindle Features: New spindle in 2025, thermal expansion compensation, sealing air seal, air blow through spindle center - Rapid Traverse (X/Y/Z): 45 m/min - Max. Acceleration (X/Y/Z): 10 m/s² - Max. Feed Force (X/Y/Z): 10 kN at 40% duty cycle - Measuring Systems: Dual direct linear measuring systems for X/Y, direct linear measuring system for Z - Positioning Accuracy (Tp): 0.007 mm according to DIN ISO 230-2 - Tool Magazine: Chain magazine with 33 tool positions - Tool Change System: Pick-up system - Max. Tool Diameter: 90 mm (full configuration) / 130 mm (with free adjacent positions) - Max. Tool Length: 300 mm - Max. Tool Weight: 10 kg - Max. Total Tool Weight: 160 kg - Tool Change Time: Approx. 2 seconds - Chip-to-Chip Time: Approx. 6 seconds - Operating Voltage: 3x 400 V - Mains Frequency: 50 Hz - Total Rated Current: 55 A - Mains Supply Fuses: 63 A gG - Required Supply Pressure: Min. 6 bar - Required Network System: TN network - Transport Dimensions: Approx. 2,250 mm (W) x 4,760 mm (D) x 2,800 mm (H) - Additional Equipment & Features: - HEIDENHAIN TS 640 3D touch probe with infrared transmission - HEIDENHAIN TT 140 automatic tool measurement - HR 410 electronic handwheel - Automatic roller shutter roof cover - Scraping-belt chip conveyor (for short metal chips up to 80 mm length) - All-round sheet steel enclosure - Stainless steel interior lining of the machining area - Work area lighting - Electrically secured horizontal sliding door with mechanical locking - Control cabinet cooling- Missing/Excluded Components: Coolant tank is NOT included (no coolant tank, no pumps, no chip flushing hose)

Condition: like new (used), Year of construction: 2012, operating hours: 5,323 h, DOOSAN DNM 500 MACHINING CENTER CNC DOOSAN – FANUC i Series MANUAL GUIDE ONLY 5,323 CUTTING HOURS! YEAR OF FIRST INSTALLATION: 2012 TABLE SIZE: 1,200 mm x 540 mm TRAVELS: X: 1,020 mm Y: 540 mm Z: 510 mm SPINDLE SPEED: 12,000 RPM TAPER: ISO 40 INTERNAL SPINDLE COOLING / HIGH PRESSURE TOOL CHANGER: 30 POSITIONS Dcodpfxez Hyyro Aizep NEW MIST EXTRACTION UNIT / AIR FILTRATION SYSTEM, TOP-MOUNTED, LOSMA BRAND CHIP CONVEYOR HIGH-PRESSURE PUMP WEIGHT: 7,000 KG COMPLETE DOCUMENTATION

Condition: good (used), Year of construction: 2000, X-axis travel: 710 mm Y-axis travel: 550 mm Z-axis travel: 500 mm Spindle speed: 50 - 10,000 rpm Control system: Heidenhain TNC 430 Table area: 900 x 600 mm Dsdpfx Asz Stdpoizjcp Maximum table load: 1,600 kg Machine weight (approx.): 10,000 kg

Condition: good (used), Year of construction: 1999, CNC Vertical Machining Center MORI SEIKI SV – 400 Control system: FANUC MSC-501 Travel range X-axis: 600 mm Travel range Y-axis: 430 mm Travel range Z-axis: 460 mm Spindle mounting: BT40 Spindle speed: 12,000 rpm Drive power: 22/18.5 kW Tool magazine: 40 Table size: 900 x 500 mm Accessories: Preparation for internal coolant supply, high-pressure pump 20 bar, 2 x articulated band chip conveyor, 30-position tool magazine, 4-axis interface with rotary table Nikken CNC-200 Dcsdpfx Aez D T I Rjizjp

Condition: ready for operation (used), Year of construction: 2000, travel distance X-axis: 800 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 500 mm, controller manufacturer: HEIDENHAIN, controller model: TNC 430, total height: 2,930 mm, total width: 2,210 mm, table width: 560 mm, table length: 1,000 mm, overall weight: 7,000 kg, spindle speed (max.): 16,000 rpm, spindle motor power: 15,000 W, number of slots in tool magazine: 30, product length (max.): 2,700 mm, number of axes: 3, This 3-axis HERMLE C800V vertical machining centre was manufactured in 2000. It features a travel range of 800 mm in the X-axis, 600 mm in the Y-axis, and 500 mm in the Z-axis. The machine includes a 30-position tool changer and a spindle speed range of 16,000 rpm. If you are looking to get high-quality machining capabilities, consider the HERMLE C800V machine we have for sale. Contact us for further details. - Power (40% / 100% Duty Cycle): 15 kW / 10 kW- Rapid Traverse (X, Y, Z): 35 m/min- Coolant System: 300 L – 40 L/min at 3 bar- Operation Voltage: 400 V / 3~ 50 Hz- Control Voltage: 24 V-- Total Nominal Current: 44 A- Total Rating: 31 kVA- Electrical Drawing No.: 300.91 K 40.1- Control Unit Operating Hours: 57,705 hrs- Machine Operating Hours: 48,735 hrs- Program Run Time: 19,077 hrs- Spindle Operating Hours: 18,005 hrs- Drive On: 30,073 hrs- Axes in Motion: 17,617 hrs- Included Equipment / Accessories:- Heidenhain TS 642 touch probe system (retrofitted in 2023)- 3 Allmatic vises- Approx. 300 tool holders- 3 jaw chucks- Miscellaneous small parts- Complete machine documentation and service reports- Service History:- 2019: New main spindle fitted- 2023: Retrofitted with Heidenhain TS 642 touch probe system Dsdpoz D Tdxefx Aizjcp Technical Specification Taper Size SK 40

Condition: excellent (used), Year of construction: 2004, 5-axis machine from the brand Hermle - Hermle U740 - Year of manufacture 2004 Control system: - Heidenhain iTNC 530 Dcedpsz Nih Eefx Aizjp - Electronic handwheel - 3D measuring probe Renishaw OMP 40-2 Main spindle: - Tool holder SK 40 - Speed range max. 12,000 rpm - B-axis with hydraulic clamping -5° / +95° Tool changer: - 12 magazine positions Work area: - X- 915 mm - Y- 500 mm - Z- 500 mm Table design: - NC rotary table - Table load max. 500 kg Coolant: - Internal cooling 40 bar - Chip conveyor Machine hours: - Machine on 30,622 - Spindle on 8,844 Accessories: - Approx. 100 tool holders incl. tool cabinet (see picture) - 1 hydraulic vise Allmatic (see picture) and much more. Delivery time: - Immediate Video available. Special features: - Machine is immediately ready for use. - Machine is immediately available for delivery. - Machine can be inspected and tested on site under power. - Machine will be loaded onto a truck free of charge. - Forklift for loading is available. - Transport can be arranged upon request.

Condition: used, Year of construction: 2009, x-travel 835 mm y-travel 510 mm z-travel 510 mm CNC-control iTNC530 HEIDENHAIN table-size 1000 x 560 mm max. table load 800 kg spindle taper SK 40 spindle turning speed range 20 - 14.000 U/min feed stepless 1 - 20.000 mm/min rapid traverse 20 m/min drive capacity - spindle motor 13 / 9 kW tool change unit 32 Pos coolant IKZ 25 bar voltage 400 V total power requirement 30 kVA weight of the machine ca. 4,5 t dimensions of the machine ca. 2,25 x 3,20 x 2,30 m chip conveyor 3,50 x 0,85 x 1,55 m coolant equipment 1,40 x 1,60 x 1,80 m Dcedpfx Aiey Ty A Sozop spindle oil cooler 0,40 x 0,50 x 1,00 m - Serial-No.: 15415041384 - Machine ON: 72,882 h - Program Run: 25.267 h - control: HEIDENHAIN iTNC 530 - Linear scales in all 3 axis - electr. handwheel - Tool changer 30 pos. with double gripper - Chip conveyor - TSC with belt filter system - Coolant unit - new ball screw incl. bearings (X-Axis)

Condition: good (used), Year of construction: 2007, functionality: fully functional, machine/vehicle number: NVLA7K0128, travel distance X-axis: 480 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 330 mm, controller manufacturer: Fanuc, controller model: 0i-MC, total length: 1,575 mm, total width: 2,168 mm, table width: 400 mm, table length: 600 mm, overall weight: 3,000 kg, spindle speed (max.): 10,000 rpm, spindle motor power: 7,500 W, spindle nose: BT40, number of spindles: 1, number of slots in tool magazine: 16, Equipment: rotational speed infinitely variable, BRIDGEPORT HARDINGE GX480 Vertical Machining Centre. New 2007 With Coolant, Interlocked guards, Low Volt Light FANUC 0i-MC Control Machine Dimensions: 1575 x 2168 mm Machine Weight 3000 kg Dcjdpfx Aiexgqwdjzsp Spindle Motor Power 7.5 kW Spindle Speed 10000 rpm Table Size 600 x 400 mm Tool Change Capacity 16 Station Tool Size BT40 Traverses XYZ 480 x 400 x 330 mm

Condition: good (used), Year of construction: 2002, X-axis travel: 800 mm Y-axis travel: 600 mm Z-axis travel: 500 mm Tool holder: SK 40 Control system: Heidenhain TNC 530i Spindle speed: 8,000 rpm Table surface: 1000 x 560 mm Equipment: Includes chip conveyor. Dedpfx Aiez Sthnjzscp

Condition: new, Year of construction: 2025, operating hours: 100 h, functionality: fully functional, travel distance X-axis: 800 mm, travel distance Y-axis: 550 mm, travel distance Z-axis: 550 mm, rapid traverse X-axis: 42 m/min, rapid traverse Y-axis: 42 m/min, rapid traverse Z-axis: 42 m/min, nominal power (apparent): 25 kVA, torque: 135 Nm, controller manufacturer: Siemens, controller model: 828D, workpiece weight (max.): 600 kg, total height: 3,000 mm, total length: 2,600 mm, total width: 2,310 mm, table width: 1,000 mm, table length: 550 mm, table load: 600 kg, overall weight: 5,000 kg, spindle speed (min.): 1 rpm, spindle speed (max.): 12,000 rpm, operating hours of spindle: 10 h, coolant supply: 30 bar, spindle motor power: 19,000 W, spindle nose: HSK63A, number of spindles: 1, number of slots in tool magazine: 30, input voltage: 400 V, type of input current: AC, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, Vertical Machining Center VM800 - Demonstration Machine - Technical specifications: Control unit: Siemens 828D Milling spindle 12,000 rpm, HSK63 Internal coolant supply (IKZ) 30 bar Bed flushing Renishaw OMP60 touch probe (Heidenhain available on request) Renishaw TS27R tool measurement (Heidenhain or BLUM available on request) Direct measuring systems in X, Y, Z axes by Heidenhain Rotating inspection window SPINVISTA (Black Edition) Automatic door Robot interface Automatic power-off function Automatic tool changer (30 positions, HSK63) Centralized automatic lubrication system Telescopic way covers Electronic handwheel for manual operation Signal lamp Machine operating manual Pneumatic air gun Dcedpjyr A T Asfx Aizep Water gun Air blow gun Chip conveyor Coolant tank 286L This and other machines from GEWA Werkzeugmaschinen GmbH are available for viewing at our facility in the Eifel region.

Condition: good (used), Year of construction: 1996, x-travel 800 mm Dcedpfxjz Dbzxo Aizep y-travel 340 mm z-travel 460 mm Control Fanuc weight of the machine ca. 3,5 t

Condition: ready for operation (used), Year of construction: 2016, travel distance X-axis: 950 mm, controller manufacturer: HEIDENHAIN, controller model: TNC640, spindle speed (max.): 15,000 rpm, number of slots in tool magazine: 60, number of axes: 5, This 5-axis DMG MORI DMU 95 Monoblock was manufactured in 2016. It features a tool capacity of 60 tools and is equipped with a Heidenhain TNC640 control unit. The machine includes an internal coolant supply of 40 bar and a Blum laser tool measurement system. If you are looking to get high-quality machining capabilities, consider the DMG MORI DMU 95 Monoblock vertical machining centre we have for sale. Contact us for further details. - Internal Coolant Supply (IKZ): 40 bar- Tool Measurement: Blum laser tool measurement- Including: Quickset- Optional / Additional Equipment: FCS clamping system (with components), HSK63 shrink-fit chucks, additional spare drives, spindles, and gearboxes- Operational Status: Fully functional, currently still in full operation- Machine Condition: Good; air/sight glass on the front is defective; runs very smoothly and with high accuracy- Previous Application Profile: 85% Steel (80% 1.1730, 15% higher-alloy steels, 5% hardened steel up to 60 HRC), 14% Aluminium, 1% Ureol and plastics- On Hours 35.000- Spindle Hours (Spindle): 23,000 hours (spindle replaced/repaired after damage in June 2021) - Machining Tolerance: 0.01 mm (standard milling), 0.02 mm (tilted milling)- Operations Supported: Roughing and FinishingThe displayed image of the machine is AI generated. Technical Specification Taper Size HSK 63 Dcedpfx Aoz S E Eloizep

Condition: excellent (used), Year of construction: 2003, operating hours: 23,273 h, travel distance X-axis: 1,200 mm, travel distance Y-axis: 900 mm, travel distance Z-axis: 500 mm, workpiece length (max.): 1,400 mm, workpiece width (max.): 900 mm, workpiece height (max.): 240 mm, total length: 4,000 mm, total width: 3,000 mm, overall weight: 13,200 kg, spindle motor power: 32 W, CNC controller: Heidenhain iTNC 530 Axes X-axis travel mm: 1.200 Y-axis travel mm: 900 Z-axis travel mm: 500 Rapid traverse m/min: 30 Worktable Table dimensions mm: 1.400 × 900 Max. workpiece weight kg: 1.800 Maximum workpiece size (W x L x H ) mm: 1.400 × 900 x 240 Spindle Spindle speed rpm: 10.000 - 16.000 - 24.000 Spindle drive power kW: 32 Spindle torque Nm: 200 Tool system Tool holder: HSK-A63 Tool magazine slots: 30 Max. Tool Diameter: 125 Max. Tool Length mm: 300 Max tool weight kg: 4 Chip-to-chip time s: 6,5 Equipment Electronic Handwheel Chip conveyor Workarea light Cooling Tank capacity: 300 L Dcjdpfxsz S Udds Aizep Machine running times Under power: 103.179 Rated power kVA: 31 Operating Time: 23.273 Basic machine dimensions / weight Length mm: 4.000 Width mm: 3.000 Height mm: 2.800 Weight kg: 13.200

Condition: like new (used), Year of construction: 2008, operating hours: 24,000 h, travel distance X-axis: 800 mm, travel distance Y-axis: 540 mm, travel distance Z-axis: 540 mm, controller manufacturer: FANUC, controller model: Series 18i-MB, workpiece weight (max.): 700 kg, table width: 540 mm, table length: 940 mm, spindle speed (min.): 8,000 rpm, mount diameter: 30 mm, tool diameter: 76 mm, tool weight: 8 g, CNC controller: FANUC Series 18i-MB Axes X-axis travel mm: 800 Y-axis travel mm: 540 Z-axis travel mm: 540 Distance spindle nose - table surface mm: 45 - 685 Worktable Table dimensions mm: 925 x 540 Max. workpiece weight kg: 700 T-Slot version: 18 Spindle Spindle speed rpm: 8.000 Tool system Tool magazine slots: 30 Max. Tool Diameter: 76 Max tool weight kg: 8 Equipment Chip conveyor Dcodsw Aaycjpfx Aizop Machine running times Under power: 24.000 Basic machine dimensions / weight Length mm: 2.955 Width mm: 2.137 Height mm: 2.713 Weight kg: 6.500

Condition: used, Year of construction: 2008, travel distance X-axis: 800 mm, travel distance Y-axis: 700 mm, travel distance Z-axis: 510 mm, total height: 3,250 mm, total length: 3,545 mm, total width: 3,970 mm, spindle speed (max.): 12,000 rpm, number of slots in tool magazine: 48, Equipment: chip conveyor, For sale is a high-precision Hurco VTXU vertical 5-axis machining center with a swivel rotary table. The machine is in very good cosmetic condition. Technical data: Year of manufacture: July 2008 Control: WinMax (dual-screen) Travel distances X / Y / Z: 800 x 700 x 510 mm Swivel range A-axis (tilting axis): -30° to +110° Rotation range C-axis (rotary table): 360° (full range) Rotary table diameter: 610 mm Table load: max. 400 kg Distance spindle nose - table: 150 - 660 mm Max. spindle speed: 12,000 rpm Spindle power: 18 kW Torque: 237 Nm Tool holder: SK 40 Magazine capacity: 48 tools Max. tool length: 280 mm Max. tool weight: 7 kg Tool change time chip-to-chip: 8 sec. Voltage: 400 V / 50 Hz Connected load: 55 kVA Compressed air requirement: 6 - 8 bar Machine dimensions (W x D x H): 3,545 x 3,970 x 3,250 mm Upon request, transport and loading can be arranged throughout Europe for an additional fee. Prices plus VAT. Inspection possible by appointment. Contact us, our team will be happy to assist you. Trade-in or exchange possible! Machine buying and selling PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES AND MORE. Do you need a high-quality but affordable metalworking machine for your production? Or do you want to sell yours? Dedszvd U Uopfx Aizecp For more information or contact options, visit our website.

Condition: excellent (used), Year of construction: 2018, HS Flex 20 station pallet loader. XYZ: 600 x 550 x 330mm, Maximum workpiece diameter 450mm, maximum workpiece height 355mm, Maximum table load 300Kg, A axis -/+ 115 degrees, spindle taper HSK 63, spindle speed 15,000rpm, 30 station tool changer, Heidenhain TNC 640 control, with swarf conveyor , and high pressure coolant. Dsdpfx Aijzghngezocp

Condition: used, overall weight: 5,500 kg, spindle speed (max.): 8,000 rpm, Highly efficient vertical machining center Chevalier QP2033-L, suitable for precision milling, drilling, and tapping of various materials Dcodpfx Aezz H Eteizop

Condition: used, Year of construction: 2001, MACH MIND VMC 1000 - A MACHINING CENTER CNC FANUC SERIES O – MD TABLE SIZE: 1,200 mm x 600 mm MAXIMUM ALLOWED TABLE LOAD: 850 KG TRAVELS: X: 1,020 mm Y: 610 mm Z: 610 mm MAX. DISTANCE TABLE – SPINDLE: 135 – 745 mm SPINDLE TAPER: BT 40 Dcedpfx Aeyuqapsizjp SPINDLE SPEED: 60 – 8,000 RPM TOOL MAGAZINE: 24 POSITIONS CHIP COLLECTION TANK WEIGHT: 6,000 KG COMPLETE WITH FULL DOCUMENTATION YEAR: 2001

Condition: ready for operation (used), Year of construction: 2004, operating hours: 37,336 h, travel distance X-axis: 810 mm, travel distance Y-axis: 610 mm, travel distance Z-axis: 610 mm, controller manufacturer: SIEMENS, controller model: 810D PowerLine, workpiece height (max.): 610 mm, total height: 2,750 mm, total width: 2,300 mm, table width: 600 mm, table length: 900 mm, table load: 500 kg, overall weight: 4,800 kg, spindle speed (max.): 8,000 rpm, spindle motor power: 15,000 W, number of slots in tool magazine: 24, tool weight: 7,000 g, positioning accuracy: 0.005 mm, product length (max.): 2,750 mm, number of axes: 3, This 3-axis SPINNER VC810 was manufactured in 2004. It features an X-axis travel of 810 mm, Y-axis travel of 610 mm, and Z-axis travel of 610 mm. The machine is equipped with a maximum spindle speed of 8,000 rpm and an automatic pick-up tool changer with a capacity of 24 tools. If you are looking to get high-quality machining capabilities, consider the SPINNER VC810 vertical machining centre we have for sale. Contact us for further details. • Rapid Traverse: 30 m/min • Taper Size: SK40 (DIN 69871A) • Tool Changer: Automatic Pick-Up Tool Changer • Linear Guideways on All Axes • Counterweight on Z-Axis • Coolant System • Working Area Light • Oil Mist Extraction System • Supply Voltage: 3/PE ~ 400 V • Frequency: 50 / 60 Hz Dodpezlrunsfx Aizecp • Operating Current (IB): 50 A • Rated Current (IN): 50 A • Chip Conveyor (optional) Technical Specification Taper Size SK 40

Condition: ready for operation (used), Year of construction: 2015, travel distance X-axis: 800 mm, travel distance Y-axis: 610 mm, travel distance Z-axis: 510 mm, total height: 3,023 mm, overall weight: 6,864 kg, spindle speed (max.): 15,000 rpm, tool weight: 8,000 g, product length (max.): 3,040 mm, number of axes: 5, This 5-axis Kitamura Mycenter-4XT was manufactured in 2014. It features an X-axis travel of 800 mm, Y-axis travel of 610 mm, and Z-axis travel of 510 mm. The machine includes a spindle speed of 15,000 rpm and a tool magazine capacity of 30 positions. If you are looking to get high-quality machining capabilities, consider the Kitamura Mycenter-4XT vertical machining centre we have for sale. Contact us for further details. • Control unit: Mitsubishi Arumatik (Fanuc compatible) • Availability: Immediately available • Z-axis travel: 510 mm • Table diameter: 400 mm • Spindle hours: approx. 11,000 h Dcedsy Idclepfx Aizop • Max. tool length: 300 mm • Tool change time: 2 s • Power supply: 58 kVA Additional equipment • 5th axis with 400 mm rotary table • 2-speed ZF gearbox on spindle • Through-spindle coolant (low pressure), high-pressure ready • 3D probe • Tool measurement system • Chip conveyor (screw + lifting type) • Approx. 30 tool holders included Technical Specification Taper Size BT 40

Condition: ready for operation (used), Year of construction: 2008, travel distance X-axis: 800 mm, travel distance Y-axis: 530 mm, travel distance Z-axis: 500 mm, spindle speed (max.): 10,000 rpm, number of slots in tool magazine: 30, number of axes: 4, This 4-axis MORI SEIKI DuraVertical 5080 was manufactured in 2008. It features an X-axis travel of 800 mm, Y-axis travel of 530 mm, and Z-axis travel of 500 mm. The machine has a robust weight of 6100 kg and includes a rotary/indexing table, which has been unused since new. If you are looking to get high-quality machining capabilities, consider the MORI SEIKI DuraVertical 5080 vertical machining centre we have for sale. Contact us for further details. • Machine weight: 6100 kg • X-Axis: 800 mm • Y-Axis: 530 mm • Z-Axis: 500 mm • 4-AXIS: Yes • Main electronic connection: 200 V, 3-phase, 50 Hz • Power consumption: 27 kVA • Machine type: Vertical Machining Center Dedpez Akr Tofx Aizocp • Year: 2008 • Made in: Japan • Equipment: Rotary/indexing table, unused since new • Machine connected and available for inspection/testing. Technical Specification Taper Size SK 40

Condition: ready for operation (used), Year of construction: 2016, travel distance X-axis: 850 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 500 mm, controller manufacturer: FANUC, controller model: 0I-MF, table load: 500 kg, spindle speed (max.): 10,000 rpm, spindle motor power: 11,000 W, number of slots in tool magazine: 24, number of axes: 4, This 4-axis HANNSA YL 850 B was manufactured in 2016. It features an X-axis travel of 850 mm, Y-axis travel of 500 mm, and Z-axis travel of 500 mm. The machine is equipped with a FANUC 0I-MF CNC, a spindle speed of 10,000 rpm, and a maximum table load of 500 kg. If you are looking to get high-quality machining capabilities, consider the HANNSA YL 850 B vertical machining centre we have for sale. Contact us for further details. Djdpfxsy Nmnaj Aizocp • Internal spindle coolant: 20 bar • Internal cooling Additional equipment • 4th axis table, 200 mm platter (continuous 4th axis) • Screw-type chip conveyor • Tool presetting on table edge Technical Specification Taper Size BT 40

Condition: used, Year of construction: 1994, travel distance X-axis: 800 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 400 mm, overall weight: 5,600 kg, spindle speed (max.): 8,000 rpm, Fanuc rotary table, Nikken BT40-8000 rpm spindle Dsds Abgfkopfx Aizecp Tool changer Tool changer arm, requires repair Travel: 800 x 400 x 400 mm

Condition: reconditioned (used), Year of construction: 2004, functionality: fully functional, CNC Vertical Machining Center MIKRON VCE 800 W Pro With Heidenhain iTNC 530 path control system Dodpsz Dwmdefx Aizecp Year of manufacture: 2004 Travel ranges: X 800 mm, Y 500 mm, Z 540 mm Spindle speed range: 30 – 10,000 rpm, stepless (SK 40) Including the following accessories: Fixed angular table, 910 mm x 500 mm clamping surface Vertical tool changer with 24 magazine slots (SK 40) Full enclosure with sliding doors and interior lighting Direct path measuring system (Heidenhain glass scales) Electronic handwheel Spindle cooling unit Chip flushing gun Signal lamp Spiral chip conveyor Coolant system Operating manuals

Condition: ready for operation (used), Year of construction: 2012, operating hours: 2,700 h, travel distance X-axis: 800 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 505 mm, controller manufacturer: FANUC, total height: 2,735 mm, table load: 500 kg, overall weight: 4,850 kg, number of axes: 3, This 3-axis Feeler PVF 800 vertical machining center was manufactured in 2012. It features a spindle speed of up to 8,000 rpm, a tool changer with 22 tools, and rapid traverse rates of 24/20/15 m/min in X/Y/Z. The machine includes a Renishaw TS27R automatic tool setter and through-spindle cooling. If you are looking to get high-quality milling capabilities, consider the Feeler PVF 800 machine we have for sale. Contact us for more information about this machine. Additional equipment • Through-spindle cooling 20 bar with pump and tank Machine Benefits Technical Machine Benefits • Machine in perfect working order and very accurate • Table size: 425 × 950 mm • T-slots: 18 mm × 3 × 100 mm • Tool changer: 22 tools (arm-less) • Equipped with renishaw ts27r automatic tool setter • Includes several mat bt40 tool holders and a vise Extra Information Power Capacity: 15 kVA Air Pressure: 6–8 bar Dodpfxoyarzfe Aizecp Dimensions Machine Depth 2435 mm