Used injection molding machines with a clamping force of 5000 - 9999 kN for sale (89)

Condition: ready for operation (used), Year of construction: 2007, operating hours: 70,000 h, functionality: fully functional, clamping force: 6,500 kN, screw diameter: 95 mm, displacement volume: 3,367 cm³, Clamping force 6500 kN Mould opening force, max. 346 kN Travel force movable platen opening 169 kN Travel force movable platen closing 144 kN Size of mould platens (h x v) 1520 x 1470 mm Distance between tie bars (h x v) 1000 x 930 mm Mould opening stroke 1150 mm Mould height min 600 mm Max. daylight 1750 mm Hydraulic ejector - stroke 250 mm Ejector force 95 kN Injection unit: Screw diameter 96 mm Ls/D ratio 23 Injection pressure 1795 bar Stroke volume 3367 ccm Shot weight (PS) 3064 gr. Injection rate 690 ccm/s Screw speed 153 1/min Plasticising rate max. 104 g/s Nozzle pressure 166 kN Electric and Hydraulic Equipment: Nominal capacity of pump motor 90 kW Installed heating capacity 50 kW Adjustable barrel heating zones 7 Dimensions and weights: Dimensions of the machine ca. 9,83 x 2,90 x 2,80 m Total machine weight 43170 kg Accessories: - Anti vibration pads - Krauss Maffei Robot LR300 X: 1200 mm, servo Y: 1000/1000 mm, servo Z: 3500 mm, servo C: 0 - 90° - Conveyor - saftey guard Additional options: Nkjdpfxsx Hzzcs Adwot - 1 x air valve - 6 x pneumatic sequentional valves - 12 hotrunner controller - 2 x hydr. core pulls on movable plate - 2 x hydr. core pulls on fix plate

Condition: excellent (used), Year of construction: 2019, operating hours: 10,000 h, functionality: fully functional, clamping force: 7,500 kN, screw diameter: 80 mm, displacement volume: 2,262 cm³, Clamping force 7500 kN Distance between tie bars (h x v) 1110 x 960 mm Mould opening stroke 1400 / 900 mm Mould height min 450 / 1150 mm Max. daylight 2050 mm Hydraulic ejector - stroke 300 mm Ejector force 195 kN Injection unit: Screw diameter 80 mm Ls/D ratio 24.8 Injection pressure 2200 bar Stroke volume 2262 ccm Shot weight (PS) 2058 gr. Screw speed 145 1/min Plasticising rate max. 71 g/s Electric and Hydraulic Equipment: Nominal capacity of pump motor 83 kW Installed heating capacity 50 kW Reservoir capacity 950 ltr. Dimensions and weights: Dimensions of the machine ca. 9,24 x 3,00 x 3,10 m Total machine weight 33000 kg Accessories: Nkedpfx Adjx Hx Sfowjt - Anti vibration pads Additional Options: - 2 x hydr. Core pulls on movable plate - 2 x hydr. core pulls on fix plate - 24 x hot runner controller - Robot interface according to Euromap 67

Condition: excellent (used), Year of construction: 2019, operating hours: 10,000 h, functionality: fully functional, clamping force: 7,500 kN, screw diameter: 80 mm, displacement volume: 2,262 cm³, Clamping force 7500 kN Distance between tie bars (h x v) 1110 x 960 mm Nksdox Hx Ndjpfx Adwet Mould opening stroke 1400 / 900 mm Mould height min 450 / 1150 mm Max. daylight 2050 mm Hydraulic ejector - stroke 300 mm Ejector force 195 kN Injection unit: Screw diameter 80 mm Ls/D ratio 24.8 Injection pressure 2200 bar Stroke volume 2262 ccm Shot weight (PS) 2058 gr. Screw speed 145 1/min Plasticising rate max. 71 g/s Electric and Hydraulic Equipment: Nominal capacity of pump motor 83 kW Installed heating capacity 50 kW Reservoir capacity 950 ltr. Dimensions and weights: Dimensions of the machine ca. 9,24 x 3,00 x 3,10 m Total machine weight 33000 kg Accessories: - Anti vibration pads Additional Options: - 2 x hydr. Core pulls on movable plate - 2 x hydr. core pulls on fix plate - 24 x hot runner controller - Robot interface according to Euromap 67

Condition: ready for operation (used), Year of construction: 2020, operating hours: 10,000 h, functionality: fully functional, clamping force: 9,000 kN, screw diameter: 100 mm, displacement volume: 3,691 cm³, Clamping force 9000 kN Nsdpfx Ajxcakredwjkt Distance between tie bars (h x v) 1180 x 1000 mm Mould opening stroke 1600 / 1000 mm Mould height min 500 / 1400 mm Max. daylight 2400 mm Hydraulic ejector - stroke 300 mm Ejector force 195 kN Injection unit: Screw diameter 100 mm Ls/D ratio 22 Injection pressure 1800 bar Stroke volume 3691 ccm Shot weight (PS) 3359 gr. Screw speed 135 1/min Plasticising rate max. 793 g/s Electric and Hydraulic Equipment: Nominal capacity of pump motor 85 kW Installed heating capacity 71 kW Reservoir capacity 780 ltr. Dimensions and weights: Dimensions of the machine ca. 9,24 x 3,21 x 2,88 m Total machine weight 38000 kg Accessories: - Anti vibration pads - 4 x 8-fold water flower Additional Options: - 2 x Air valves - 2 x hydr. Core pulls on movable plate - 2 x hydr. core pulls on fix plate - 1 x pneum. Core pull on movable plate - 1 x pneum. Core pull on fix plate - Robot interface according to Euromap 67

Condition: excellent (used), Year of construction: 2016, Engel duo 1800/500 eco drive Clamping force: 500 t Screw diameter: 70 mm Nkjdpfxew Hbylo Adwst Injection volume: 1139 cm3 Injection pressure: 1735 bar Distance between tie bars V: 830 mm Distance between tie bars H: 910 mm Type: Horizontal Drive: Hydraulic CC300 controll Hours: 38.000 Euromap 67 2 core pullers Ecodrive 2 pumps Quick clamp system

Condition: good (used), Year of construction: 2004, ENGEL DUO 4550/700 Origin: ENGEL St. Valentin, Austria 🔧 CLAMPING UNIT 1. Clamping force: 7000 kN 2. Opening force (with pressure pads): 510 kN 3. Opening stroke: 1350 mm 4. Minimum daylight: 450 mm 5. Maximum daylight: 1900 mm 6. Minimum mold height: 450 mm 7. Maximum mold height: 950 mm 8. Distance between tie bars (H × V): 1465 × 1360 mm Nkedswnqk Nspfx Adwjt 9. Mold plate size (H × V): 1025 × 990 mm 10. Ejector stroke: 250 mm 11. Ejector force: 63 kN 12. Dry cycle time (Euromap 6): 3.6 s (Z) / 2.4 s (Stroke) 🔩 INJECTION UNIT 1 1. Screw diameter: 90 mm 2. Max. shot volume: 3180 cm³ 3. Max. shot weight (PS): 2880 g 4. Injection pressure: 1470 bar 5. Injection speed: 100 mm/s 6. Plasticizing capacity (3-zone screw): 270 g/s 7. Plasticizing capacity (barrier screw): 308 g/s 8. Injection flow rate: 465 cm³/s 9. Heating zones: 7 10. Installed heating power: 75 kW 11. Hydraulic pump drive: 100 kW Engel Linear Robot ERC53/1-E 22 Hotrunner 4 core pullers PC, ABS material

Condition: good (used), Year of construction: 2013, functionality: fully functional, Clamping force: 128 t. Tie-bar spacing: 410 × 410 mm. Machine no. 13A350 Platen size: 650 × 652 mm Mold height (min–max): 140–440 mm. Opening stroke: 360 mm. Ejector stroke: 95 mm. Ejector force: 4 t. Screw diameter: 42 / 47 / 53 mm. L/D ratio: 21.9 / 19.6 / 17.4 Injection weight (PS): Diam. 42: 216 g. Diam.47: 271 g. Diam.53: 344 g. Injection volume: 235 / 295 / 375 cm3. Injection pressure: 2005 / 1600 / 1260 kg/cm2. Injection stroke: 170 mm. Screw rotation speed: 0–200 rpm. Machine dimensions (L × W × H): 5.0 × 1.2 × 1.88 m Nksdex Hibdspfx Adwjt Machine weight: 4500 kg.

Condition: ready for operation (used), Year of construction: 1997, functionality: fully functional, clamping force: 6,500 kN, screw diameter: 130 mm, displacement volume: 6,172 cm³, injection pressure: 1.296 bar, plate width: 1,700 mm, plate height: 1,704 mm, TECHNICAL DETAILS Clamping force: 6,500 kN Tool opening force, max.: 346 kN Moving platen opening force: 169 kN Moving platen closing force: 144 kN Clamping plate (h x v): 1,704 x 1,700 mm Clear width (h x v): 930 x 930 mm Tool opening stroke: 1,150 mm Tool installation height, min.: 600 mm Opening width: 1,750 mm Ejector stroke: 250 mm Ejector force forward/backward: 226 kN Injection unit Screw diameter: 130 mm L/D ratio: 20 Injection pressure: 1,296 bar Displacement: 6,172 cc Shot weight (PS): 5,617 g Injection flow: 1,540 cc/s Screw speed: 138 rpm Plasticizing flow: 238 g/s Nozzle contact force: 246 kN Electrohydraulic equipment Nominal pump motor power: 132 kW Installed heating power: 70 kW Cylinder heating control zones: 7 Nodpfx Aex Dbtwjdwjkt MACHINE DETAILS Space requirement approx.: 12.00 x 2.80 x 2.70 m Total weight: 43,000 kg EQUIPMENT - Oscillating elements - 1 x air valve - 2 x hydraulic core pull on BFAP - 2 x hydraulic core pull on FFAP - 8 x hot runner control points - Robot interface according to Euromap 67

Condition: excellent (used), Year of construction: 2015, Clamping force: 650 t Screw diameter: 80 mm Shot weight: 2013 g Distance between tie bars V: 910 mm Distance between tie bars H: 1040 mm Mould opening stroke: 800/1350mm DIe height min-Max: 400-950mm Open daylight: 1750 mm Nsdpfx Adswzlz Njwjkt Shot volume: 2212 cm3 Type: Horizontal Drive: Hydraulic 4 hydraulic cores 2 air valves New screw and barrel 1 year ago.

Condition: ready for operation (used), Year of construction: 2007, functionality: fully functional, clamping force: 9,500 kN, screw diameter: 120 mm, ejector stroke: 300 mm, opening stroke: 1,900 mm, TECHNICAL DETAILS Clamping force: 9,500 kN Opening force: 665 kN Tie bar distance: 1,400 x 1,150 mm Clamping plates: 1,960 x 1,710 mm Opening stroke: 1,900 mm Njdpexup Siefx Adwekt Min. mould height: 500 mm Max. mould height: 1,200 mm Max. opening width: 2,400 mm Ejector stroke: 300 mm High-performance screw HPS-UN, diameter: 120 mm Nozzle radius: 30 mm Nozzle opening: 12 mm Screw diameter: 120 mm Shot weight (HDPE): 5,420 g Shot volume: 7,634 cm³ Specific injection pressure: 2,257 bar MACHINE DETAILS Dimensions & Weight Dimensions (L x W x H): 12,770 x 3,420 x 2,750 mm Machine weight: 61.5 t

Condition: ready for operation (used), Year of construction: 2001, operating hours: 70,000 h, functionality: fully functional, clamping force: 8,000 kN, screw diameter: 90 mm, clearance between the columns: 1,000 mm, injection pressure: 1,742 bar, opening stroke: 2,000 mm, TECHNICAL DETAILS Clamping force: 8,000 kN Maximum mold opening force: 356 kN Feed force of the moving opening platen: 98 kN Force of the moving closing platen: 92 kN Platen size (H x W): 1,610 mm x 1,530 mm Tie bar spacing (H x W): 1,120 mm x 1,000 mm Mold opening stroke: 1,400 mm Minimum mold height: 600 mm Maximum opening: 2,000 mm Hydraulic ejector stroke: 250 mm Screw diameter: 90 mm L/D ratio: 23 Injection pressure: 1,742 bar Injection volume: 2,863 cm³ Shot weight (PS): 2,605 g MACHINE DETAILS Dimensions & Weight Nkjdpsxup Nnofx Adwet Dimensions (L x W x H): 10,500 x 2,860 x 2,890 mm Weight: 43,000 kg Operating hours: 70,000 h

Condition: used, Year of construction: 2019, clamping force: 700 kN, displacement volume: 3,691 cm³, injection pressure: 1,780 bar, overall weight: 34,000 kg, screw conveyor diameter: 100 mm, Freight basis: ex-site Nodpfx Aewc D T Hjdwskt Delivery time: by arrangement Payment terms: 100% before taking delivery of the machine, net

Condition: good (used), Year of construction: 2004, ENGEL DUO 4550/700 – Technical Specification General Information: Machine designation: DUO 4550/700 Controll : CC100 Clamping Unit: Clamping force: 7000 kN Opening force (with pressure pads): 510 kN Opening stroke: 1350 mm Minimum mould height: 450 mm Maximum mould height: 1350 mm Daylight (platens open): 2700 mm Platen dimensions (H × V): 1460 × 1360 mm Tie bar distance (H × V): 1030 × 930 mm Max. mould weight: 9000 kg Ejector stroke: 300 mm Ejector force: 90 kN Ejector strokes (Euromap 6): 8 Dry cycle time (Euromap 6): 7.0 seconds Injection Unit: Screw diameter: 90 mm L/D ratio (barrier): 24 Plasticizing rate: 2488 cm³/s Nodpfx Adev U Dn Njwjkt Shot volume: 2860 cm³ Shot weight (theoretical): 2600 g Injection flow rate: 533 cm³/s Injection pressure: 1910 bar Specific injection pressure: 2100 bar Nozzle length: 185 mm Nozzle contact force: 65 kN Heater capacity (zone 7): 62 kW Pump drive power: 75 kW Oil capacity: 1000 liters Weight: Net weight of clamping unit: 22 tons Net weight of injection unit: 10 tons Cores: 2+2 Linear Robot Engel ERC

Condition: excellent (used), Year of construction: 2000, operating hours: 60,000 h, functionality: fully functional, clamping force: 9,000 kN, screw diameter: 120 mm, clearance between the columns: 1,120 mm, column diameter: 180 mm, displacement volume: 5,430 cm³, Equipment: documentation/manual, The machine is ready to load. 900 ton clamping force, equipped with take out robot, hopper dryer, hopper loader. First and only owner since produced. Nkedpfx Aoickd Hedwet The price is loaded on truck.

Condition: excellent (used), Year of construction: 2001, Injection moulding machine: Krauss Maffei KM 800-5000 MC Year of manufacture: 2001 Nodsxqh I Iopfx Adwekt Operating hours: 70,000 h Configuration: Machine with robot, safety cage and conveyor belt Availability: Two identical machines available Clamping unit: Clamping force: 8,000 kN Maximum mould opening force: 356 kN Moving platen opening force: 98 kN Moving platen closing force: 92 kN Mould platen dimensions (H x W): 1,610 mm x 1,530 mm Distance between tie bars (H x W): 1,120 mm x 1,000 mm Mould opening stroke: 1,400 mm Minimum mould height: 600 mm Maximum mould opening: 2,000 mm Hydraulic ejector stroke: 250 mm Injection unit: Screw diameter: 90 mm L/D ratio: 23 Injection pressure: 1,742 bar Injection volume: 2,863 cm³ Shot weight (PS): 2,605 g Dimensions and weight: Machine dimensions (LxWxH): 10.5 x 2.86 x 2.89 m Weight: 43 tonnes

Condition: excellent (used), Year of construction: 2015, Netstal EVOS 5500-2000 Injection Molding Machine Year of manufacture: 2015 Very compact, hydraulic, three-plate clamping unit with encapsulated lubrication system, ensuring an oil-free environment in the mold space. High-precision and wear-resistant linear guides guarantee maximum mold longevity and increased machine availability. The hybrid injection unit features a modular design and a flexible performance package (metering, clamping, injection) that can be adapted to specific applications. The highest plasticizing performance and optimal melt quality are ensured by selecting process-appropriate components. Servo-electric metering drive and state-of-the-art valve technology guarantee energy-efficient operation. Technical parameters Certification: CE in accordance with EU Directive 2006/42/EC (EN 60204, etc.) Mold installation height: 600–1050 mm Injection unit drive: metering axis speed up to 420 rpm, torque 2400 Nm Injection unit Injection speed: maximum dynamics thanks to high-performance servo valve technology Screw: 62 mm diameter, 25.2D length, version B – Three-zone screw made of hardened, wear-resistant tool steel – Injection pressure: 2400 bar – Injection volume: 749 cm³ Clamping unit Ejector force: 123.2 kN Main drive: Eco Powerunit 55 kW – Dual pump system with hydraulic accumulator – High-efficiency synchronous drive – Adaptive control technology for maximum energy efficiency Oil cooling: supply water temperature 35°C Base Cylinder head with open nozzle, prepared for pneumatic control Guide bushing R = 35 mm, through-hole D = 5 mm Mold plate hole pattern: Euromap standard Centering and ejector system Centering on nozzle-side plate: D = 125 H7 x 20 mm (Euromap) Through-hole in moving platen: D = 80 mm Ejector hydraulics positioned on the operator offside Ejector hole pattern: Euromap Ejector controlled Mold hydraulics 4 hydraulic circuits for auxiliary functions (ejector, cores, nozzle pins) Electrically controlled check valves in circuits A + B Free configuration of functions with position protection Nozzle hydraulics with needle shut-off 4 hydraulic circuits Flow speed and pressure manually adjustable Open/close function Special software: cascade control Pneumatics and cooling Water cooling battery and hot runner circuit – 4-section, switchable Pneumatics: 2x 3/2 valve, capacity 890 l/min Location: on operator offside at nozzle-side platen Electronics / Software / Interfaces Frequency: 50 Hz Power supply: 400V, 3P + N + E, tolerance ±10% (transformer required for larger deviations) Nksdpfoxl Ul Aex Adwot Surge protection Mold heating: – 4 circuits at 3.3 kW each – 8 circuits at 0.75 kW each Connectors: HAN 16E for power and sensors, Euromap 14 Sockets: – 2x 16A CEKON (main switch-controlled) – 1x 32A CEKON with RCD (FI) switch Interfaces: – Euromap 15 – full implementation (parts 1–5) – SPC (Statistical Process Control) – Euromap 66 (control of 5 heating/cooling units) – Euromap 67 (robot interface for ejector and hydraulics) External fault signals: 2 inputs in control cabinet Operator identification: PIN

Condition: new, Year of construction: 2025, Injection Moulding Machine – Krauss Maffei KM 651-6100 GX Year of manufacture: 2025 Hydraulic-mechanical, two-platen clamping system with four pressure pads on the fixed platen and four locking units on the moving platen. PV – injection unit pressure regulation. MC6 control system based on an industrial PC using real-time Ethernet technology, equipped with an integrated 21.5” operator panel with a color touchscreen display. Plasticizing unit Complete plasticizing unit for thermoplastics, screw diameter 95 mm, with non-return valve and open nozzle Nozzle radius: 25 mm Nozzle opening: 9 mm Technical data (standard version) Clamping unit Clamping force: 6500 kN Opening force: 455 kN Platen dimensions (H x V): 1660 x 1530 mm Tie bar spacing (H x V): 1200 x 1020 mm Clamping stroke: 1450 mm Mould height (min.–max.): 450 – 1000 mm Daylight: 1900 mm Ejector stroke: 300 mm Ejector force forward/reverse: 140 / 70 kN Injection unit Screw diameter: 95 mm L/D ratio: 23.0 Injection pressure: 1795 bar Injection volume: 3367 cm³ Shot weight (PS): 2391 g Injection speed: 110 mm/s Injection flow rate: 780 cm³/s Screw speed (standard): 147 rpm Plasticizing capacity (standard screw speed): 102 g/s Nozzle contact force: 166 kN Electro-hydraulic system Pump motor power: 97 kW Installed heater power: 54 kW Number of cylinder heating zones: 7 Dry cycle time (Euromap 6): 3.3 s / 840 mm Dry cycle time (KM standard): 2.9 s / 600 mm Oil tank capacity: 1435 liters Linear robot – Krauss-Maffei LRX 250 Payload capacity < 25 kg (gripper + drives + parts) Part removal on the operator-offside Axes: X axis (from mould): 900 mm, servo motor Y axis (vertical, telescopic, with motor brake): 1000/1000 mm, servo motor Z axis (transversal): 2500 mm, servo motor Nsdpjxdd U Defx Adwskt Dimensions and weight Net weight (incl. control cabinet): 38.5 t Machine dimensions (L x W x H): 10.19 x 3.03 x 2.51 m

Condition: new, Year of construction: 2025, Injection Molding Machine – Krauss Maffei KM 500-4300 GX Year of manufacture: 2025 Hydraulic-mechanical, two-platen clamping system with four pressure pads on the fixed platen and four locking units on the moving platen. PV – injection unit control. Nsdpfxsxdd S Nj Adwjkt MC6 control system based on an industrial computer using real-time Ethernet technology, equipped with an integrated 21.5” operator panel with a color touchscreen display. Plasticizing Unit Complete plasticizing unit for thermoplastics, screw diameter 90 mm, with non-return valve and open nozzle. Nozzle radius: 15 mm Nozzle opening: 6 mm Technical data (standard version) Clamping Unit Clamping force: 5,000 kN Opening force: 350 kN Platen dimensions (H x V): 1430 x 1350 mm Tie bar spacing (H x V): 1040 x 910 mm Opening stroke: 1350 mm Mold height (min.–max.): 400–950 mm Daylight: 1750 mm Ejector stroke: 250 mm Ejector force forward/backward: 95 / 49 kN Injection Unit Screw diameter: 90 mm L/D ratio: 20.0 Injection pressure: 1,839 bar Shot volume: 2,290 cm³ Shot weight (PS): 2,084 g Injection speed: 100 mm/s Injection flow rate: 636 cm³/s Screw speed (standard): 195 rpm Plasticizing capacity (at standard screw speed): 134 g/s Nozzle contact force: 129 kN Electro-hydraulic system Pump motor power: 90 kW Installed heater power: 44 kW Number of barrel heating zones: 7 Dry cycle time (according to Euromap 6): 2.8 s / 728 mm Dry cycle time (according to KM standard): 2.5 s / 520 mm Hydraulic oil quantity: 1,180 l Linear Robot – Krauss-Maffei LRX 250 Payload < 25 kg (gripper + drives + parts) Parts placement on the operator-opposite side Axes: X-axis (from mold): 900 mm, servomotor Y-axis (vertical, telescopic, with motor brake): 1000/1000 mm, servomotor Z-axis (crosswise): 2,500 mm, servomotor Dimensions and weight Net weight (with control cabinet): 25.0 t Machine dimensions (L x W x H): 8.08 x 2.80 x 2.39 m

Condition: ready for operation (used), Year of construction: 2008, functionality: fully functional, clamping force: 8,000 kN, screw diameter: 130 mm, ejector force: 1,39,000 N, opening stroke: 1,030 mm, plate width: 1,500 mm, plate height: 1,620 mm, TECHNICAL DETAILS Clamping force: 8,000 kN Plate size (h x v): 1,620 x 1,500 mm Clear width between tie bars (h x v): 1,120 x 1,000 mm Mold height: 500 - 1,050 mm Maximum plate distance: 2,080 mm Opening stroke: 1,030 mm Ejector stroke: 350 mm Ejector force: 139 kN Mold weight: 7,200 kg Injection system Screw diameter: 130 mm Nodpfx Aswp Iraedwjkt Displacement: 7,300 cm³ Injection weight (PS): 6,640 g Injection pressure: 1,300 bar Screw length: 20 l/d Electrical and hydraulic equipment Rated power of pump motor: 110 kW Heating power: 79 kW Oil tank capacity: 1,300 L MACHINE DETAILS Machine dimensions LxWxH: 12.3 m x 2.7 m x 2.7 m Total weight: 33,500 / 9,700 kg

Condition: ready for operation (used), Year of construction: 2004, operating hours: 70,000 h, functionality: fully functional, clamping force: 6,500 kN, screw diameter: 100 mm, injection pressure: 1,742 bar, mold height (min.): 600 mm, opening stroke: 1,150 mm, plate width: 1,440 mm, plate height: 1,490 mm, Injection molding machine with Wittmann automation TECHNICAL DETAILS Clamping force: 6,500 kN Mold opening force: 346 kN Slide plate opening force: 169 kN Slide plate clamping force: 144 kN Mounting plate dimensions: 1,490 mm x 1,440 mm Clear width between columns: 1,000 mm x 930 mm Mold opening stroke: 1,150 mm Minimum mold height: 600 mm Injection Unit Screw diameter: 100 mm Injection pressure: 1,742 bar Injection volume: 2,411 cm³ Shot weight for PS: 2,170 g Nodpfxowp Si No Adwskt Injection throughput: 649 cm³/s Wittmann W643 Robot X-axis servo: 1,200 mm Y-axis servo: 2,400 mm Z-axis servo: 6,000 mm C-axis servo: +/- 90° A-axis servo: +/- 180° Vacuum: 4 circuits Gripper: 4 circuits Electrical and Hydraulic Equipment Rated power of pump motor: 90 kW Installed heater output: 44 kW Number of cylinder heating zones: 7 Oil tank capacity: 1,240 l MACHINE DETAILS Net weight with control cabinet: 39.5 t Operating hours: 70,000 h MAINTENANCE All hydraulic hoses replaced 12/24 Last inspection Krauss Maffei 24.03. New screw drive (hydraulic) 25.01. New non-return valve 01/25 EQUIPMENT - Fully hydraulic clamping system - MC 4 control system with color monitor and integrated control panel - Built-in floppy disk drive - Complete plasticizing system for thermoplastics with 100 mm screw diameter, check valve, and open nozzle

Condition: like new (used), Year of construction: 2005, Injection moulding machine ENGEL CL 2550/550 Year of manufacture - 2005 Name of the robot-"ENGEL ERC53/1-F" Closing force [tons]- 550 Maximum distance between plates [mm]-1650 Min. mold height [mm]-310 Max. mold height [mm]-800 Column spacing (mm)-915x860 Nedpfxjq Nybge Adwskt Size of mounting plates (mm)-1345x1280 Ejector stroke (max) [mm]-250 Auger diameter [mm]-80 Injection weight [g]-1800 Oil quantity [liter]-1000 Injection sequence into the mold -2 Machine with robot ready to work Number of hydraulic cores S/R- 1/1

Condition: excellent (used), Year of construction: 2006, Krauss Maffei KM 800 – 12000 MX injection molding machine Year of production - 2006 Closing system: - Mold closing force: kN 8000 - Mold opening force: kN 560 - Dimensions of the mounting plate (h x v): mm 1600 x 1530 - Clearance between columns (h x v): mm 1120 x 1000 - Mold opening path: mm 1600 - Mold installation height (min - max): mm 500-1100 - Plate opening stroke: mm 2100 - Ejector stroke: mm 300 - Ejector force: kN 200/100 Injection system: Nedpfxotmq Aks Adwekt - Screw diameter: mm 135 - Injection pressure: bar 1389 - Injection volume: cm3 8588 - Injection weight for PS: g 6098 - Number of screw revolutions, standard/option: rpm 121/153 - Injection efficiency (standard) Electric-hydraulic equipment - Nominal power of the pump motor: kW 110 - Installed power of heaters: kW 57 - Number of cylinder heating zones: - 7 - Number of dry cycles according to Euromap: 1/h 965 - Oil tank capacity: l 1500 Dimensions and weight - Net weight with control cabinet: t 45 - Machine dimensions (length x width x height): m 10.81 x 2.92 x 2.51

Condition: excellent (used), Year of construction: 2015, Krauss Maffei KM 900 – 8100 GX Injection Moulding Machine Year of manufacture: 2015 General description: Hydro-mechanical, two-platen clamping system with 4 pressure pads on the fixed platen and 4 adjustment units on the moving platen. The machine is equipped with a PV-type proportional valve injection unit adjustment system. Control is handled by the modern MC6 control system, based on an industrial PC with real-time Ethernet technology. The control panel features an integrated 19-inch touchscreen with a color display, LED backlighting, and visualization of all processes using ProcessDesigner. Plasticising unit: Complete unit for thermoplastics processing Wear-protected (abrasion-resistant) version Screw diameter: 105 mm Check valve and open nozzle Technical data: Clamping unit: Clamping force: 9,000 kN Mould opening force (pressure pads): 630 kN Platen size (W x H): 1,660 x 1,530 mm Tie bar spacing: 1,180 x 1,000 mm Max. mould opening stroke: 1,600 mm Mould height (min – max): 500 – 1,100 mm Maximum opening stroke: 2,100 mm Ejector stroke: 300 mm Ejector force (forward / return): 140 / 70 kN Injection unit: Screw diameter: 105 mm L/D ratio: 23.0 Nkodpfxowyxbgj Adwst Injection pressure: 1,778 bar Injection volume: 4,546 cm³ Shot weight (PS): 3,228 g Injection rate: 805 cm³/s Screw speed (standard): 150 rpm Nozzle contact force: 166 kN Electrical and hydraulic equipment: Pump motor rating: 120 kW Heater rating: 59 kW Number of barrel heating zones: 7 Dry cycle time / stroke (Euromap 6): 3.3 s / 826 mm Dry cycle time / stroke (KM standard): 2.9 s / 590 mm Oil tank capacity: 1,450 l Dimensions and weight: Net weight (with control cabinet): 40 t Machine dimensions (L x W x H): 10.72 x 3.03 x 2.51 m

Condition: excellent (used), Year of construction: 2011, Krauss Maffei KM 850-12000 MX injection molding machine Year of production - 2011 LRX 500 robot Z axis 4000 mm X axis 1500 mm Y axis 1250/1250 mm Hydraulic-mechanical two-plate closing system with 4 pressure cushions and 4 locking units on the moving plate. PV - injection unit regulation. MC 5 control system with color monitor, integrated control panel and USB data carrier. Plasticizing system Complete plasticizing system for thermoplastics with screw diameter 135 mm, with check valve and open nozzle Nozzle radius 25 mm, nozzle opening 9 mm TECHNICAL DATA Closing unit - mold closing force: kN 8500 - mold opening force: kN 560 - dimensions of the mounting plate (h x v): mm 1600 x 1600 - clearance between columns (h x v): mm 1140 x 1140 - mold opening path: mm 1600 - mold height (min-max.): mm 500 - 1100 - opening width: mm 2100 - ejector stroke: mm 300 - ejector force: kN 200/ 100 Injection unit - screw diameter: mm 135 - pressure injection: bar 1389 - injection volume: cm3 8588 - injection weight for PS: g 6098 - injection efficiency: cm3/s 1414 Electro-hydraulic equipment - rated power of the pump motor: kW 132 - dry cycle time according to Euromap 6: 1/h 965 - oil tank capacity: l 2440 Nkodpfxowqdyis Adwot Weight and dimensions - net weight with control cabinet: t 49 - dimensions of the place for installation (length x width x height): m 11.72 x 2.92 x 2.71

Condition: good (used), Year of construction: 2011, Krauss Maffei KM 850-12000 MX injection molding machine With Krauss Maffei robot Year of manufacture - 2011 Hydraulic-mechanical double-plate clamping system with 4 pressure pads and 4 locking units on the moving plate. PV - adjustment of the injection unit. MC 5 control system with color monitor, integrated control panel and USB data storage. Plasticizing system Complete plasticizing system for thermoplastics with a screw diameter of 135 mm, with reverse lock and open nozzle. Nozzle radius 25 mm, nozzle opening 9 mm TECHNICAL DATA Closing unit - mold closing force: kN 8500 - mold opening force: kN 560 - clamping plate dimensions (h x v): mm 1600 x 1600 - clearance between columns (h x v): mm 1140 x 1140 - mold opening path: mm 1600 - mold height (min-max.): mm 500 - 1100 - opening width: mm 2100 - ejector stroke: mm 300 - ejector force: kN 200/ 100 Injection unit - screw diameter: mm 135 - injection pressure: bar 1389 - injection volume: cm3 8588 - injection size for PS: g 6098 - injection capacity: cm3/s 1414 Electro-hydraulic equipment - rated power of pump motor: kW 132 Nkodpetrya Rjfx Adwst - dry cycle time according to Euromap 6: 1/h 965 - oil tank capacity: l 2440 Weight and dimensions - net weight with control cabinet: t 49 - dimensions of foundation space (L x W x H): m 11.72 x 2.92 x 2.71