Used cylindrical grinding machines 0-599mm grinding length for sale (118)

Condition: used, Year of construction: 2003, Technical details: grinding length: 1500 mm weight of the machine ca.: 12 t Karstens EMAG H310 Universal Grinding Machine Year of manufacture: 2004 Center distance: 1500 mm Center height: 325 mm Reinforced workpiece spindle, load capacity up to 250 kg Driven C-axis for polygon, thread, and eccentric grinding. 3 individually mounted grinding spindles. Siemens 840D control system Gsdox Hgilspfx Ah Djkf *

Condition: refurbished (used), Year of construction: 2025, operating hours: 36 h, functionality: fully functional, machine/vehicle number: 1024-54, Country of Manufacture: Switzerland Voltage: 380/50/3 Net weight: approx. 1600 kg Customs tariff: 8460.2920 Dimensions: 235 x 155 x 145 cm TECHNICAL FEATURES: MAIN DIMENSIONS: Centre height: 100 mm Distance between centres: 400 mm LONGITUDINAL SLIDE: Max travel: 420 mm Minimum automatic travel: 1 mm Table feed speed: 100–3500 mm/min Overtravel delay: 0–5 sec. Maximum table swivel (400/650 mm): 30°/15° CROSS SLIDE: Max travel: 170 mm Rapid traverse: 30 mm Plunge depth (diameter): 1.9 mm Feed rate 1: 0.03–1.5 mm/min Feed rate 2: 0.02–0.3 mm/min Plunge feed per impulse: 0.0005–0.025 mm WHEELHEAD: Grinding wheel (diameter x width x bore): 350 x 32 x 127 mm Drive power: 3 kW Peripheral speed: 30 m/s Spindle speeds: 1600/1975/2200 rpm Manual stroke: 120 mm Swivel to right: 15°/30° Optional wheel guard for wheel set max width: 50 mm WORKHEAD: Swivel range: 0°–90° Spindle speeds: 80/175/380/800 rpm Internal taper: Morse 4 Collet type: W-20 Drive power: 0.5 kW Maximum workpiece weight: 20 kg Load for in-the-air grinding: 12 Nm Optional stepless drive speed range I: 30–300 rpm Optional stepless drive speed range II: 120–1200 rpm TAILSTOCK: Internal taper: Morse 2 Quill travel: 20 mm GUARANTEED WORKING ACCURACY: Generator straightness: Between centres: 400 mm Measured over 400 mm: 0.002 mm Between centres: 650 mm Measured over 650 mm: 0.003 mm Roundness accuracy for in-the-air grinding: 0.0004 mm CONNECTION VALUES: Power consumption: max. 8 kVA Gkjdpfx Ahsw T Sc Ns Dof Permissible voltage variation: –15% / +10% Permissible frequency variation: ±3% Compressed air: 5 bar All technical specifications are given without obligation and subject to errors or omissions.

Condition: good (used), grinding diameter 450 mm grinding length 600 mm Gedpfx Ahjxcblqj Djkf centre height 140 mm workpiece dia. 280 mm number of turns of spindle head 63 - 400 U/min grinding wheel speeds 20-35 m/s dimensions of the machine ca. 2,4 x 1,9 x 2,1 m

Condition: used, grinding diameter 250 mm grinding length 500 mm dimensions of grinding wheel 400 x 50 mm In our assessment, the machine is in good used condition and can be inspected under power by appointment. Technical features & accessories: - Tailstock - Various accessories Accessories, tools, and clamping devices shown are only included in the scope of delivery if this is noted in the additional information. Subject to changes and errors in the technical data and specifications, as well as prior sale! Gjdexzuylspfx Ah Dekf

Condition: good (used), Year of construction: 2021, functionality: fully functional, machine/vehicle number: 80171, total width: 3,500 mm, total length: 8,500 mm, total height: 2,900 mm, grinding diameter: 500 mm, overall weight: 10,000 kg, controller manufacturer: FANUC, controller model: SERIES OI-TF, TECHNICAL DATA & EQUIPMENT: Lining width: max. 32 mm Cutting disc: Gksdpfxsxm Tyhj Ah Dof Permitted diameter: max. 520 mm Disc width: max. 3 mm Disc height: max. 5 mm Workpiece clamping: Left workpiece spindle, chuck type: hydraulic clamping Right workpiece spindle, chuck type: hydraulic clamping The machine includes a bar feeder Manufacturer: FMB Type: MINIMAG 20 Year of manufacture: 2021 Also with extraction unit and various documentation NOTES ON COLLECTION: Attention: available from week 3, 2026 FCA Winterlingen, loaded onto truck

Condition: used, Year of construction: 1981, Technical details: grinding diameter: 240 mm grinding length: 700 mm centre height: 125 mm table length: 1525 (schwenkbar) mm distance grinding spindle - table min./max.: 225/410 mm rpm speed range - grinding wheel: 1590 U/min grinding wheel dia. (unused wheel): 600 mm grinding wheel dia. (used wheel): 450 mm cutting speed: 50 m/s total power requirement: 13 kW weight of the machine ca.: 5,5 t space requirements of the machine approx.: L:2,8xB:2,2xH:1,8 m Cylindrical grinding machine, semi-automatic operation - grinding spindle head -adjustment 185mm - grinding spindle head-infeed 0,001-0,05 mm/min continuous - rotation workpiece 50-500 rpm continuous machine is equipped: - sleeve with hydr. retraction - cooling device - trueing device - grinding wheel balancing - transverse delivering device for grinding spindle head - hydr. adjustment of grinding table. Upper table swivable. Gjdpou Ng Avsfx Ah Dskf Documentation i.D. *

Condition: ready for operation (used), Year of construction: 1994, functionality: fully functional, machine/vehicle number: 12145 MAG, total width: 9,000 mm, total length: 8,000 mm, total height: 5,000 mm, type of input current: AC, feed rate X-axis: 30 m/min, feed rate Y-axis: 30 m/min, feed rate Z-axis: 30 m/min, rapid traverse X-axis: 30 m/min, rapid traverse Y-axis: 30 m/min, rapid traverse Z-axis: 30 m/min, input voltage: 400 V, travel distance X-axis: 4,000 mm, travel distance Y-axis: 2,500 mm, travel distance Z-axis: 1,000 mm, controller manufacturer: Power Automation, controller model: PA 8000 HS, laser hours: 53,000 h, laser power: 6,000 W, laser wavelength: 10,600 nm, positioning accuracy: 0.01 mm, shaft length: 10,600 mm, type of cooling: water, control type: CNC control, degree of automation: semi-automatic, laser type: CO₂ laser, laser source manufacturer: TRUMPF Lasertechnik, actuation type: electric, laser source model: TruFlow 6000, Equipment: CE marking, cooling unit, documentation/manual, Offered due to cessation of operations: Used 5-axis laser cutting and welding system with 6000-watt CO2 laser: Manufacturer: Maschinenfabrik Arnold, Ravensburg Model: full flying optic, 12145 MAG Year of manufacture: 1994 Working areas: X-axis: 4000 mm Y-axis: 2500 mm Z-axis: 1000 mm C-axis: 400 degrees B-axis: +/- 120 degrees Machine body: welded steel frame in open "C" design; Y-axis with gantry drive Linear axes with ball screw drive, rotary axes with toothed belt digital position feedback via encoders Workpiece holding: 3 modular tables with T-slot system CNC control: Power Automation PA8000 HS Aperture up to the processing optics: 100 mm Processing optics aperture: cutting 35 mm; welding 50 mm Cutting head: Precitec system Welding head: Arnold system CO2 laser: TRUMPF TruFlow 6000 with ECQ unit, plus telescope and DWS mirrors for beam shaping - Year of laser source: 2008 Operating hours: - Beam on: approx. 10,600 h - Laser on: approx. 53,000 h - In 2024, all gas coolers as well as resonator optics replaced (TRUMPF invoices available) Laser cooling system: - Heat exchanger unit by KLH, year of manufacture 2008 - Cooling tower by Rehsler, year of manufacture 2008 Godpfx Ahox E Udno Dekf The laser system is currently still under power and available for inspection. Immediate availability. All information without guarantee. Prices are net, plus VAT at the current rate. Ex works, without packaging. Dismantling and loading by the buyer, support from our side within our possibilities. Further details gladly on request or during an on-site inspection. Sale to commercial customers only. No warranty or returns.

Condition: refurbished (used), Year of construction: 2025, operating hours: 50 h, machine/vehicle number: 3018-04, Country of manufacture: Switzerland Voltage: 380/50/3 Net weight: 3100 kg Overall dimensions: 230x155x170 cm Installed power: 13 kVA Customs tariff position: 8460.2920 Gkodpsw T Sd Tjfx Ah Dof TECHNICAL SPECIFICATIONS MAIN DIMENSIONS Distance between centers: 650 mm Grinding capacity SpW+bs: -80 Stroke: 700 LONGITUDINAL SLIDE Max stroke: SpW+50 mm Minimum automatic feed: 1.5 mm Speed: 50-5500 mm/min Reversal delay: 0-6 sec Maximum table swivel: 12°/10°/8.5°/6° Pneumatic relief for table and workhead CROSS SLIDE Max stroke: 300 mm Rapid traverse: 60 mm Plunge grinding depth in diameter: 3.4 mm Feed 1: 0.012-6 mm/min Feed 2: 0.012-1.2 mm/min Feed per pulse: 0.001-0.05 mm GRINDING WHEEL HEADSTOCK Left-side wheel, external grinding: 400x80x127 mm Drive power: 5.5 kW Peripheral speed: 35 m/s RPM: 1670/2110 min-1 Internal grinding device for belt-driven spindles, including drive unit: 1.5 kW WORKHEAD Swivel range: 0-90° Continuously variable RPM: 30-1000 min-1 Internal taper: Morse 5 Collets: W-25 Drive power: 0.55 kW Maximum workpiece weight between centers: 130 kg Grinding load between centers: 100 Nm TAILSTOCK Internal taper: Morse 3 Quill stroke: 35 mm Fine adjustment for cylindricity correction: ± 40 μm TECHNICAL CHARACTERISTICS: GUARANTEED WORKING ACCURACY Straightness of the generator over 630 mm: 0.003 mm Roundness during chuck grinding: 0.0003 mm CONNECTION VALUES Maximum absorbed power: 13 kVA Maximum permitted voltage fluctuation: -15%/+10% Maximum permitted frequency variation: ± 3% Required compressed air pressure: 5 bar Unless otherwise stated or in case of error or omission, these technical details are provided without engagement.

Condition: used, Year of construction: 2019, controller manufacturer: Sonstige, controller model: MAPPS IVB, _____ Description: Year of manuf. : 2019 Control : Sonstige MAPPS IVB Grinding length : 150 mm Technical Details: Grinding-ø (max.):350 mm Grindinglength (max.):150 mm Grindingwheel-ø:25-180 mm Swivelrange Grindingwheelhead (max.):230° Grindingspindle: Technology:Internalgrinding spindle Speedrange:3-20.000 rpm Power (max.):11 kW Grindingwheelholder:HSK-A63 Drillingspindle: Technologie:Drillingspindle Speedrange:1.500-3.500 rpm Power (max.):7,5 kW Taper:HSK-A63 Workpiecespindle: Technology:Directdrive Clmapingsurface:ø265 mm Tableloadiing (max.):200 kg Workpiececlamping:Pneumatic chuck In general: Movement in X/Z:965/532 mm Rapid travers in X/Z:24/20 m/min Equipment/Accessory: Positionsensor:Direct Scales in X/Z Gedpfjxx Eraox Ah Dokf Chipmanagement:Magneticbeltconveyor Coolingmanagement:Coolant unit with Paperbeltfilter and Temperature control Workpiecemeasurement:Touch probe, Renishaw MP 250 with Master Gauge Station Toolmagazine:8 Stations (each 4 stations for Grinding- and Drillingtools) Dresser:Wheeldresser + Single point diamond (Marposs) Setup operations:Electronic handwheel Automation:Fanuc-Robot M-20iA with Stocker (30 Stations ø329 mm) Grindingmistseparation:Akamatsu HVS-100-CE 044 Further Equipment:Spindle chiller, Trafo

Condition: excellent (used), Year of construction: 2016, functionality: fully functional, center height: 200 mm, workpiece weight (max.): 30 kg, grinding length: 400 mm, grinding wheel diameter: 350 mm, total width: 2,600 mm, total length: 1,800 mm, grinding diameter: 100 mm, workpiece weight between centers: 30,000 g, distance between centers: 400 mm, type of input current: AC, spindle speed (max.): 1,000 rpm, spindle speed (min.): 90 rpm, grinding spindle motor power: 3,700 W, grinding spindle speed: 2,000 rpm, overall weight: 2,000 kg, pivoting range: 30 °, input voltage: 400 V, Equipment: rotational speed infinitely variable, incl. swiveling internal grinding attachment General Diameter over table: 200 mm Distance between centers (ABC): 400 mm Grinding length: 400 mm Grinding diameter (max. / min. OD): 100 / 6 mm Grinding diameter (max. / min. ID): 85 / 6 mm Max. weight between centers: 30 kg Gkedpfxsx E U Hio Ah Def Max. weight incl. chuck: 10 kg Grinding spindle Grinding wheel size: 350 x 127 x 50 mm Minimum usable grinding wheel size: 300 mm Spindle speed: 1800 – 2000 rpm Spindle motor power: 3.7 kW (Peripheral) speed: 33 m/sec Rapid traverse: 40 mm Rapid traverse with handwheel: 20 mm Max. automatic infeed on diameter: 1.7 [3.4] mm Minimum diameter increment: 0.001 mm Infeed speed on diameter (coarse/fine): 0.015 – 6 / 0.015 – 3 mm/min Table Table speed: 0.1 – 5 m/min Table stroke: 450 mm Minimum travel: 2 mm Maximum table swivel range: -2° to +30° Work spindle Taper bore: MT-4 Spindle speed: 90 – 1000 rpm Spindle motor power (2-stage): 0.28/0.37 kW Including complete set of Schaublin collets DM 2.5 – 20 Incl. 3-jaw chuck Incl. flange with grinding wheel

Condition: good (used), Year of construction: 2016, functionality: fully functional, machine/vehicle number: 80042, grinding wheel diameter: 500 mm, total width: 3,500 mm, total length: 8,500 mm, total height: 2,900 mm, overall weight: 10,000 kg, controller manufacturer: FANUC, controller model: SERIES OI-TD, TECHNICAL DATA & EQUIPMENT: Operating voltage: 400 V Frequency: 50 Hz Control voltage: 24 V Rated current: 3 x 125 A Grinding wheel: Segment width: max. 32 mm Cutting disc: Permissible diameter: max. 520 mm Segment width: max. 3 mm Segment height: max. 5 mm Gkjdpfexm T Ewox Ah Def Workpiece clamping: Left workpiece spindle, chuck type: hydraulic actuation Right workpiece spindle, chuck type: hydraulic actuation Including bar feeder from manufacturer FMB Type: MINIMAG 20 Year of manufacture: 2016 NOTES ON COLLECTION: Attention: only available from week 3 of 2026 FCA Winterlingen, loaded onto truck

Condition: used, Year of construction: 1994, Technical details: grinding diameter: 198 mm grinding length: 200 mm z-axis: längs:240 mm x-axis: quer: 340 mm control: Tschudin CNC E 9034B grinding wheel diameter: 500 mm centre height: 100 mm Distance between centres: 300 mm max. workpiece weight between centres: 100 kg interface: RS 232 total power requirement: 16 kVA weight of the machine ca.: 4,5 t space requirement of the machine approx.: L:3,1xT:3,2xH:2,0 m Plunge type grinding automatic technical specifications: - grinding spindle tool intake: 203,2mm - grinding spindle not swiveling - workpiece spindle swivelling : +30° to -90° - tailstock collet cone = MK 3 - control: ISO - and graphically programing equipment: - electronical balancing device : AB 100 T.K. - grindig wheel changing aid - grinding disc dressing device (also for grinding forms programable) - cooling system with paper filtering system - Measuring device (out of function, integrated measuring control not connected) Godpju Ng A Nofx Ah Dokf *

Condition: used, Year of construction: 1992, Technical details: grinding diameter: 50 mm Gkedpfxer R Ek So Ah Dsf grinding length: 100 mm centre height: 100 mm centre distance: 200 mm

Condition: excellent (used), Year of construction: 2006, functionality: unexamined, machine/vehicle number: 06.E.400.020, Manufacturing origin CH Voltage 3x400V - 24(V – DC) Netweight 5500 kg Dimensions 237x206x195 cm TECHNICAL DATA Control Fanuc 21i-MB 3 axes U : work wheel axis W : workpiece / dressing axis X: drive wheel axis Gkjdpfsiqt S Ajx Ah Dsf Through feed grinding Workpiece diameter Ø 1.5 - 50 mm Plunge grinding Workpiece diameter Ø 1.5 - 100 mm Grinding length max 270 mm Grinding wheel Max. external diameter Ø 400 mm Inner diameter Ø 203.2 mm Max. speed 50 m/sec. Drive power 11 kW Optional drive power 29 kW Regulating wheel Max. external diameter Ø 250 mm Inner diameter Ø 127 mm Speed 5 - 1'000 min-1 Tilting angle +5° / -5 Drive power 3.7 kW Positioning accuracy In all 3 axes 0,1 µm Resolution of glass scales 0.05 µm Dimensions Length 2060 mm Width, (with door open) 2370 mm (3120 mm) Height, (with door open) 1950 mm (2100 mm) Weight 5500 kg Compressed air Max. pressure 16 bar Air consumption 165 L/min Air consumption with straightening spindle 250 L/min Temperature +15° / +40° C. errors and omissions excepted-data given without obligation

Condition: reconditioned (used), STUDER S 20-12 is a cylindrical grinder engineered for precision, high accuracy and reliable performance. Capacities: centre height 100 mm, distance between centres 400 mm; wheel Ø300×30 mm, bore 127 mm; work-spindle 20°, table tilt 30°. Specs: work-spindle speeds 60–1200 rpm (stepless); wheel speed up to 45,000 rpm; table feed 100–3500 mm/min; wheel motor 4.5 CV; 3×380 V; weight ≈1900 kg; dims 1500×1400×1600 mm. Key accessories: swivelling internal grinding unit, dressing devices, 120 mm magnetic chuck. Achieves tight tolerances; typical sectors: automotive, aerospace, toolmaking, medical, watchmaking Gksdpfxjxx U T Hj Ah Djf

Condition: good (used), Grindable, largest diameter: 200 mm Center distance: 450 mm Gksdpjlz Nxwefx Ah Djf Weight of the machine approx: 2, 2 t Machine dimensions:

Condition: new, The HFS 2550 F Advance is a remarkable addition to the range of Conventional Surface Grinders, showcasing the latest advancements in the KNUTH line of grinding machines. This robust machine features a cast-iron frame that ensures superior rigidity and torsional strength, combined with precision guideways for unmatched machining quality. Users will appreciate the advanced Siemens technology that facilitates easy programming and operation via a user-friendly touchscreen. The HFS 2550 F is designed for those who find conventional machines insufficient but CNC technology overly complex. With a powerful coolant system and integrated hydraulic functions, it provides optimal performance and reliability. This machine comes standard with a magnetic clamping plate, an automatic central lubrication system, and extensive equipment for enhanced versatility. For those considering investment in a reliable surface grinding solution, the HFS 2550 F Advance stands out in both the Conventional Surface Grinder category and the broader segment of Grinding Machines. Request a quote today and experience the precision and efficiency that KNUTH delivers. Gksdeuyig Eopfx Ah Def

Condition: used, Year of construction: 1998, centre height 125 mm centre distance 400 mm Control FANUC 21i Capstan diameter max. 406 mm wheel dimensions 406 x 127 x 40 mm workpiece weight 30 kg longitudinal slide -travel 483 mm cross slide - travel 254 mm Gsdpjxwdwfefx Ah Dskf total power requirement max. 20 kVA weight of the machine ca. 4,0 t dimensions of the machine ca. 3,0 x 2,0 x 2,1 m including 2 Pcs. internal grinding spindle incl. B axis 1° Hirt, controlled incl. C-axis incl. Quick-Set Probe including Sensitron including Magnetic Jaw including hydraulically foldable dresser including other small accessories including documentation without a coolant system, as it was previously connected to a central unit Power On hours approx. 71,000 h Spindle hours approx. 25,900 h

Condition: good (used), grinding length: 500 mm, A Studer cylindrical grinding machine of the type RHU 500 is for sale Gkjdpfx Aoqzh Elsh Def The machine is in good condition and fully operational, the guides show hardly any signs of wear. Technical data Grinding wheel diameter: Ø 250 mm Sanding length: 500 mm Sanding wheel size: 400 x 50 mm On request, dismantling, loading and transport can be organized throughout Europe for an additional charge Prices plus VAT Glnld8 Viewing possible by appointment. Contact us, our team will be happy to help you. Trade-in or exchange possible! Machines purchase / sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES AND MUCH MORE. Do you need a high-quality but inexpensive metalworking machine for your production? Or do you want to sell yours? For further information or contact options, please visit our website

Condition: refurbished (used), Year of construction: 2007, functionality: fully functional, machine/vehicle number: 027.0400/067, CNC CYLINDRICAL GRINDER STUDER S-33 CNC Year: 2007 - Fanuc 21i-TB 1 External Grinding Spindle Country of Origin: Switzerland Voltage: 380/50/3 Net machine weight: 4,000 kg TECHNICAL SPECIFICATIONS Distance between centers: 600 mm Center height: 175 mm Maximum workpiece weight: 80 kg Gkjdpfxjw T Sh Eo Ah Dof Longitudinal Slide Z Max. travel: 800 – 1,150 mm Travel speed: 0.001 to 10,000 mm/min (early 2000’s model: 0.001-5,000 mm/min) Resolution: 0.0001 mm Cross Slide X Max. travel: 285 mm Travel speed: 0.001 to 20,000 mm/min (early 2000’s model: 0.001-10,000 mm/min) Resolution: 0.0001 mm Wheelhead (universal version) Swiveling range: -15° to 225° (early 2000’s model: -15° to 195°) Swivel axis: 2.5 / 1 ° Hirth Drive power: 7.5 or 9 kW or 11 kW Grinding wheel: 500x63 (80/110F5) x203 mm Workhead Rotational speed: 1 – 1,500 min-1 Mount taper: MT4 or MT5 / ISO 50 Drive power: 1.6 or 3.0 or 4.0 kW Tailstock Mount taper: MT3 or MT4 Quill stroke: 35 / 50 mm (early 2000’s model: 35 mm) Quill diameter: Ø 50 mm Fine adjustment: +/- 40 µm Control system: Fanuc 21i-TB All technical details are provided in good faith but subject to errors or omissions.

Condition: excellent (used), Year of construction: 1978, Machine can be inspected under power Gkodpfx Ajwz Emlsh Dsf

Condition: ready for operation (used), Year of construction: 2006, functionality: fully functional, machine/vehicle number: 2352, center height: 200 mm, grinding length: 500 mm, grinding diameter: 55 mm, rotational speed (max.): 5,970 rpm, controller model: Siemens Sinumerik 840-D, TECHNICAL DETAILS Grinding diameter: 5–55 mm Grinding length: 500 mm Workpiece diameter: 5–55 mm Workpiece length: max. 500 mm Grinding wheel arrangement: right, 30° inclined Gkjdpfx Ajxvxl Ish Dof Grinding wheel dimensions: 600 x 30 x 203.2 mm Drive power: 7 kW X/Z-axis drive: ball screw Travel speed: 0.01 – 10,000 mm/min Resolution: 1 µm Workpiece spindle runout: < 1 µm Spindle speed max.: 5,970 rpm Workpiece changing system: Fanuc robot Control system: Siemens Sinumerik 840-D MACHINE DETAILS Total power requirement: 44 kW Centre height: 200 mm Machine weight: 7,000 kg EQUIPMENT Tailstock Longitudinal adjustment: manual Rotating centre: Junker standard, diameter 75 mm Clamping pressure: adjustable via hydraulic system Tailstock dimensions: diameter 100 mm × 430 mm

Condition: new, The RSM 500 A, a powerful Conventional Cylindrical Grinder from KNUTH, is built to deliver exceptional grinding performance with its robust design and excellent rigidity. Featuring a premium cast-iron machine frame, this grinder ensures optimal conditions for achieving superior grinding results. The machine is equipped with finely adjustable hydraulic feeds that operate smoothly in the longitudinal direction, and a swiveling table allows for precise taper grinding. With a maximum grinding diameter of 200 mm and a grinding length of 500 mm, it caters to a variety of applications. The headstock can rotate 180 degrees for internal grinding, while the hydraulic tailstock, with foot switch operation, enhances efficiency during setup and workpiece exchanges. Standard equipment includes a 2-axis position indicator, internal grinding equipment, and a comprehensive accessory package. Invest in reliability and precision for your grinding needs—request a quote for the RSM 500 A today, a leading choice in the Conventional Cylindrical Grinder category within the Grinding Machines sector. Gkedpfx Aoncdx Noh Dof

Condition: refurbished (used), functionality: fully functional, machine/vehicle number: 32461/2384, Manufacturing origin Swiss Voltage 380 / 50 / 3 Netweight 4900 lbs Dimensions 121 x 69 inches TECHNICAL DATA Nominal distance between centre 600 mm Max. distance between centres, headstock and tailstock projecting 750 mm Height of centres, standard 125 mm Height of centres by means of raising blocks for work head-and tailstock 175 =ᐳ 250 mm Max. swing diameter with 125 mm height of centres 250 mm Max. swing diameter with raising blocks 350 =ᐳ 500 mm Table swivels each side 10° Max. lenght for surface grinding (width=200 mm) 900 mm Table speed infinitely viable by hydraulic drive, approx. .. 6 m/min Dwell of table reversal 0 - 5 sec. Grinding wheel for cylinrical grinding (diameter x width x hole) 350/400x50x127mm Grinding wheel for surface grinding diameter x width x hole 250 x 13 x 76 Speeds of grinding wheel spindle 1500/1700/2200/3600 Grinding wheel head swivels 270° with indexed stop each 90° Gsdsd Amifepfx Ah Dskf Vertical movement of grinding wheel head, height of centres -350 mm Cross movement of grinding wheel head 285 mm Rapid advance and withdrawal of wheelhead 40 mm Intermittent infeed per reversal of table 0,001-0,03 mm/dia Infeed for plunge grinding 0-0,9 mm/dia Micro-corrector of infeed, 1 division of dial 0,001 mm/dia Swivel of work headstock 360° work speeds infinetely viable, normal/special 20-400/10-400 Internal taper of headstock/tailstock 5/3 Morse Grinding wheel motor, approx. 4 HP errors and omissions excepted data given without obligation Inventory Nr.2170089, machine equipped with : 1 Workpiece headstock MT5 1 sinus rule without comparator 1 Wheel headstock with 4 pulleys 1 Tailstock MT3 1 Collet clamping device with drawbar and reduction sleeve B32 1 Internal grinding device with quill Fischer UJ50x250 – pulley Ø 48 for 14000 min-1 1 Pivoting wheel trueing-up device with sole 50 mm 1 Table’s pivoting stop without comparator 1 Cooling device through decantation 1 extractor 1 balancing stake

Condition: used, Year of construction: 1988, functionality: fully functional, center height: 300 mm, grinding length: 600 mm, For sale is a very well-maintained cylindrical grinding machine from Jones shipman. Gedpfowpb Hqsx Ah Dskf The machine is still very precise. The machine can gladly be demonstrated and tested.