Used cylindrical grinding machines 600-1099mm grinding length for sale (182)

Condition: used, Year of construction: 1980, Technical details: grinding diameter: 380 mm grinding length: 1000 mm centre height: 180 mm grinding wheel diameter: 400 mm max. workpiece weight between centres: 250 kg Dedpfx Ajwy Ri Neizscp total power requirement: 10 kW weight of the machine ca.: 4,1 t dimensions of the machine ca.: 3 x 2 x 1,6 m with internal grinding attachment with fixed and swivelling headstock with coolant tank *

Condition: excellent (used), Year of construction: 1997, grinding diameter 80 - 250 mm grinding length 600 mm centre height 175 mm longitudinal feed 750 mm workpiece turning speeds 6 - 600 U/min grinding spindle speed 1500 - 3600 U/min cross movement - autom. and by hand 320 mm Control Kelco 80 weight of the machine ca. 4,4 t Dcodeyb S Rcepfx Aizop dimensions of the machine ca. 3,1 x 2,1 x 2,0 m

Condition: as good as new (ex-display), Year of construction: 2025, Studer S40 1000/1600 Grinding length: 1,000/1,600 mm Center height: 175 mm (optionally more) Workpiece weight: 120 kg Dcjdpfxjfg S Uaj Aizjp Additional freely selectable options: - Completely new control cabinet with Siemens Sinumerik One or Fanuc 0iTF-Plus control - Quick setup via GSN user interface - B-axis freely positionable - Second external grinding wheel - Internal grinding unit - Center height adjustment - Dressing spindle for diamond dressing roll - Balancing and finishing sensor - Hydraulic clamping/releasing of the tailstock - Automatic Siemens door drive - 19" / 22" screen - Remote maintenance - Conversion to needle nozzles - Matching coolant/extraction system - Automation preparation - and much more We would also be happy to overhaul your existing machine! Schaudt / Studer / Kellenberger / Bahmüller / Voumard / Overbeck / Fortuna / Tacchella and others.

Condition: excellent (used), Year of construction: 1980, Karstens K11 1000 This Karstens K11 comes from a university and has seen very little use. All cables and hoses in the wet area have been replaced. It has extremely few operating hours. Since we specialize in Karstens round grinding machines, we can offer you complete service (electrical and mechanical) for the machine after purchase. Technical data: Center distance: 1000 mm Center height: 180 mm Workpiece weight: 70 kg cantilevered, 250 kg between centers Grinding wheel diameter: 400 mm Workpiece spindle: MK 4, speed continuously adjustable 30-450 rpm, swivel range 0 - 90 ° Tailstock: MK4, quill travel 45 mm Tailstock rest next to the Z-axis table Quill force: 200-600 N Table tilt: 12.5 degrees Adjustable travel of the feed spindle: 80 mm Rapid traverse: 50 mm Coarse adjustment with air cushion: 280 mm Grinding spindle motor (external): 4 KW Grinding spindle motor (internal): 2.2 KW Workpiece spindle motor: 0.55 KW Machine weight: Net 3500 kg Dcodpfxoh Rit Es Aizep Feed drive via DC motor Air cushion-supported rapid adjustment of the grinding spindle stock for quick and safe positioning of the grinding position. Separate drive for the spindles for external and internal grinding. Fully automatic working cycle, feed movement via a wind rose switch: Rapid traverse forward, rapid traverse backward, grinding operation, feed stop, mym feed. Automatic longitudinal grinding cycle Central coolant supply for all grinding points Workpiece spindle stock with continuously adjustable drive for both rotating and lockable spindle. Feed control for longitudinal grinding and face grinding, input for retraction, feed amounts, feeds, dwell times, clearance strokes Digital display for X-axis from Heidenhain Paper band filter system can be offered upon request. Similar to Weiss/EMAG/GP round grinding machines/Studer/Kellenberger/Schaudt/Tschudin/Tacchella/Dannobat .

Condition: as good as new (ex-display), Year of construction: 2026, Karstens K11 1000 Premium Retrofit Cylindrical Grinding Machine Manufacturer: Karstens Technical Data: Center distance: 1100 mm Center height: 180 mm / (250 mm = Option) Workpiece weight: 100 kg unsupported, 300 kg between centers Dsdpfx Aieiv Au Ejzjcp Grinding wheel diameter: 400 mm or 500 mm (external grinding wheel) Workpiece spindle: MK 4, infinitely variable speed adjustment 30-450 rpm, swivel range 0 - 90° Tailstock: MK4, quill stroke 45 mm Quill force: 200-600 N manually, (up to 2500 N possible, adjustable = Option) Table tilt: 10 degrees Adjustment travel of feed spindle: 80 mm Rapid traverse: 50 mm Rough adjustment with air cushion: 280 mm Grinding spindle motor (external): 4 KW / (5.5 KW = Option) Infinitely variable speed adjustment of the grinding wheel with potentiometer Grinding spindle motor (internal): 2.2 KW Workpiece spindle motor: 1.1 KW Hydraulic motor: 1.5 KW Lubrication motor: 0.1 KW Hydraulic tank: 80 liters Machine weight: Net 3800 kg Feed drive via DC motor Air cushion-assisted rapid adjustment of the grinding spindle stock for quick and safe approach to the grinding position. Separate drive for the spindles for external and internal grinding. Fully automatic operating sequence, feed movement via wind rose switch: Rapid traverse forward, rapid traverse backward, grinding operation, feed stop, incremental feed. Automatic longitudinal grinding cycle Central coolant supply for all grinding points Workpiece spindle stock with infinitely variable drive with a rotating and lockable spindle. New digital feed control with Siemens panel and Siemens PLC for longitudinal grinding and plunge grinding, input for retraction, feed amounts, feeds, dwell times, rapid traverse distances, compatible with the old Karstens feed control, with a color Siemens touch panel, scale in X and Z axis, manufacturer HEIDENHAIN. Similar to Weiss/EMAG/GP cylindrical grinding machines/Studer/Kellenberger/Schaudt/Tschudin/Tacchella/Dannobat /Bahmüller/Fortuna

Condition: used, TECHNICAL DETAILS - distance between centers : 1000 [mm] - centers height : 175 [mm] - strokes (Z/X) : 1050 x 275 [mm] - max. feeds (Z/X) : 10 x 5 [m/min] - grinding wheelhead type : 2 external, 1 internal - left external grinding wheel dimension : 500 x 63 x 127 [mm] - right grinding wheel dimension : 400 x 63 x 127 [mm] - grinding wheel motor power : 7,5 [kW] - rotation speed : 1670 - 2110 [Rpm] - grinding wheelhead orientation : -15 to +225 [°] - resolution : 0.001 [°] - workhead tapper : MT5 - workhead rotation speed : 1 - 1027 [Rpm] - workhead power : 0,785 [kW] - tail stock : MT3 - quill stroke : 35 [mm] - weight : 7000 [kg] - hours under power : 47.959 [h] EQUIPMENT - control CNC FANUC 16 TB - programming through Pictogramming - Release B version B275 - deported electronic handwheel - 2 grinding wheels left-right internal at 180 [°] - B axis for indexing of the grinding wheelhead every 0,001 [°] - high precision C axis for part indexing and form grinding - tail stock with fine concentricity adjustment - sensitron - upper table swiveling fine adjustment - control pedal - lenght positioning device MARPOSS E32R with sensor T25G - measuring scales HEIDENHAIN on X/Z - coolant tank with pump - 1 grinding wheel holder flange - 1 grinding wheel - 1 dry center - 1 electro-spindle : 40.000 [Rpm] - tail stock hydraulic retract through pedal Dcedpfjuhbyqsx Aizep

Condition: refurbished (used), Year of construction: 2025, functionality: fully functional, machine/vehicle number: 1315/451, Completely overhauled: Mechanics, geometry, hydraulics, and electrical parts (checked and/or replaced) Wheelhead: Disassembled, parts cleaned, worn or defective components replaced, motor overhauled, bearings replaced, belts replaced, spindle disassembled, seals and O-rings replaced, adjustments made. Newly painted. Workhead: Disassembled, parts cleaned, worn or defective components replaced, motor overhauled, belts replaced. New spindle bearings. Newly painted. Tailstock: Disassembled, inspected, overhauled. Hydraulics: Disassembled, motor checked, hoses replaced, defective and worn parts replaced. Hydraulic block checked. X-axis: Disassembled, all worn parts such as O-rings, seals, segments, etc. replaced, hydraulic piston overhauled, table ground. Z-axis: Disassembled, table ground, worn or defective parts replaced, hydraulic piston overhauled, newly painted. Electrical cabinet: Completely checked, various relays replaced. Paintwork: Colors: White RAL 9003 and Grey RAL 7011 Geometry according to manufacturer's protocol. Various accessories checked and cleaned. Origin: CH Voltage: 380 / 50 / 3 Net weight: approx. 2,200 kg Customs tariff number: 8460.2920 TECHNICAL SPECIFICATIONS Nominal distance between centers: 600 mm Max. distance between centers (with extended headstock): 750 mm Center height, standard: 125 mm Center height with interchangeable pads for heads: 175–250 mm Max. workpiece diameter (125 mm center height): 250 mm Max. workpiece diameter with interchangeable pads: 350–500 mm Swiveling range of table in each direction: 10° Max. grinding length for flat surfaces (max. width = 200 mm): 900 mm Continuously variable hydraulic table speed: up to approx. 6 m/min Table reversal delay: 0–5 sec Grinding wheel for external grinding, diameter - width - bore: 400x50x127 mm Grinding wheel for flat surface grinding: 250x13x76 mm Wheelhead spindle speed: 1,500/1,700/2,200/3,600 rpm Djdpfxow U Ry Nj Aizocp Wheelhead swiveling range: 270°, with indexing every 90° Vertical travel of wheelhead, center height: 125–350 mm Transverse travel of wheelhead: 285 mm Hydraulic rapid traverse stroke: 40 mm Intermittent infeed of wheel by table reversal: 0.001–0.03 mm/dia Continuous infeed for plunge grinding: 0–0.9 mm/dia Micrometric infeed stop, by division: 0.001 mm/dia Workhead swiveling range: 360° Workhead spindle speed, stepless: normal/special: 20–400 / 10–400 rpm Internal taper of workhead/tailstock: Morse 5/3 Wheelhead motor: approx. 4 HP All technical specifications are given without obligation and subject to errors or omissions.

Condition: as good as new (ex-display), Year of construction: 2025, Offered is a conventional cylindrical grinding machine EMAG W 11 Evolution. The conventional external-internal face cylindrical grinding machine fits perfect for single parts, prototypes and small batches. The basis of the EMAG W 11 Evolution machines is the established KARSTENS cylindrical grinder concept. No hydraulics, axis drives with servo motors and screw spindle drive, technology entry of the grinding parameters via touchscreen, automatic dressing with compensation, automatic axis release. TECHNICAL DATA Workpiece lenght: max. 1,500 mm Center height: 200 mm | Ooption 320 mm Workpiece weight: 250 kg External grinding wheel diameter: max. 500 x 80 mm Workpiece headstock: MK4 | Option MK5 / MK6 Tailstock: MK 4 Dcsdpfotmrlhjx Aizep Price, delivery time and equipment of the machine according to agreement.

Condition: good (used), Tos Hostivar cylindrical grinding machine Dcjdpfxeq H Ap Nj Aizep Type: 1U X-path: 900 mm bed: 900 x 140 mm Turning diameter bed: 260 mm Chuck diameter: 120 mm Diameter grinding stone max: 320 mm Dimensions: 150x105x140 cm LxWxH

Condition: refurbished (used), Year of construction: 2006, functionality: fully functional, machine/vehicle number: 119/020.0895, Manufacturing origin CH Voltage 400 V Netweight 4500 kg Custom position 8460.2320 Dimensions 2700x2350x2100 mm TECHNICAL DATA Control Fanuc 16i-T Center height 175 mm Distance between centers 1000 mm LINEAR AXES Grinding length 500 mm Strokes X : 267 mm Z : 650 mm WHEEL HEADSTOCK Continuous orientation +/- 8.5°. External grinding wheel size 500x80x203 mm Power 7.5 kW Speed 44 m/sec. WORKPIECE HEADSTOCK Taper type MT5 C-axis +/- 5 Power 1 kW Speed 30-1000 min-1 TAILSTOCK Taper type MT3 Sleeve stroke 35 mm Sleeve diameter Ø 50 mm Max. workpiece weight 130 kg POWER SUPPLY Voltage 400V 50 Hz errors and omissions excepted-data given without obligation Fully overhauled: Mechanics, geometry, hydraulics and electrical parts checked and/or replaced. Grinding headstock Disassembly, cleaning of parts, replacement of worn and defective parts, overhaul of motor, replacement of bearings, replacement of belts, disassembly of spindle, replacement of seals and O-Rings + adjustment. New paintwork. Headstock Dismantle, clean parts, replace worn and faulty parts, overhaul motor, replace belts. New spindle bearings. New paintwork. Tailstock Dismantled, checked and overhauled. Hydraulics Dismantle, check motor, replace hoses, defective and worn parts. Check hydraulic block X-axis Dismantle, replace worn parts such as O-Rings, seals, rings etc., overhaul hydraulic piston, grind tables. Z axis Dismantle, grind tables, replace worn and defective parts, overhaul hydraulic piston, new paintwork. Electrical cabinet Complete check, change various relays. Dcjdpfx Aolbgfcsizsp Painting Colors: White RAL 9003 and gray RAL 7011 Geometry according to manufacturer's protocol. Inspection and cleaning of various accessories

Condition: refurbished (used), Year of construction: 2026, Karstens K11 650 This cylindrical grinding machine has been completely overhauled by PS-Karstens. The machine has been inspected and is in very good condition. Since we specialize in Karstens cylindrical grinding machines, we can offer you complete service (electrical and mechanical) for the machine after purchase. Technical data: Distance between centers: 650 mm Distance between centers: 180 mm Workpiece weight: 100 kg cantilevered, 250 kg between centers Grinding wheel diameter: 400 mm Workpiece spindle: MK 4, speed continuously adjustable 30-450 rpm, swivel range 0 - 90 ° Tailstock: MK4, quill stroke 45 mm, cylinder fine adjustment Quill force: 200-600 N, hydraulically operated via foot pedal Table inclination: 10 degrees Adjustment travel of feed spindle: 80 mm Rapid traverse: 50 mm Rough adjustment with air cushion: 280 mm Grinding spindle motor external: 4 KW Grinding spindle motor internal: 2.2 KW Workpiece spindle motor: 0.55 KW Machine weight: Net 3800 Kg Feed drive via DC motor Air cushion-supported rapid adjustment of the grinding spindle head Dedpfx Aish Rixxjzjcp for quick and safe positioning to the grinding position. Separate drive for the spindles for external and internal grinding. Fully automatic process, feed movement via jog shuttle switch: Rapid traverse forward, rapid traverse backward, grinding operation, feed stop, incremental feed. Automatic longitudinal grinding cycle Central coolant supply for all grinding points Workpiece spindle head with continuously adjustable drive with a rotating and lockable spindle. Feed control for longitudinal grinding and plunge grinding, input for retraction, feed amounts, feed rates, dwell times, non-cutting travel Paper band filter system approx. 250 L Similar to Weiss/EMAG/GP cylindrical grinding machines/ Studer/ Kellenberger/ Schaudt/ Tschudin/ Tacchella/ Dannobat/ Bahmüller/ Fortuna

Condition: used, grinding diameter 350 mm grinding length 600 mm centre height 175 mm grinding wheel diameter 400 mm grinding wheel width 50 mm bore 127 mm MK5 work piece spindle speed 20-400 U/min grinding head swivelling 360 ° grinding spindle head - swivable 180 + - ° grinding spindle speed 1500,1700,2200 U/min 0-9,99 mm/Ø 0-9,99 mm/Ø ±10 ° longitudinal feed of the table 1100 mm table speeds 0,02-6 m/min 130 kg 130 inkl. Spannung kg cross travel max. 270 mm 80 mm tailstock quill taper MT 3 quill travel 30 mm total power requirement 6,5 kW weight of the machine ca. 3,05 t dimensions of the machine ca. 4 x 2 m Overhauled according to Kellenberger guidelines including new, modern and future-proof control system. Photo of already delivered machine in centre distance 1000mm. -Operation via the touch panel is extremely simple. -The symbols on the control panel are practically identical to the original original control system, so there is no need for familiarisation. -Diagnostic function with display of PLC messages and digital I/O -Dressing function can be extended or changed at the customer's request. -Orientated spindle stop of the workpiece spindle possible on request. -New maximum infeed of 40 mm can be extended on request. -Digital display in 2 axes. Resolution x-axis 0.5my Options: -Encoder with digital display in the workpiece headstock -Rotary encoder with digital display in the grinding headstock (no height adjustment with spindle possible) with spindle possible) -New stable internal grinding device diameter 80mm or 100mm with height adjustment. -Increase of the centre height to max. 225mm -Speed control for the grinding spindle Included: -Operating tool -Clamping tube for chuck Further accessories on request. The x-axis of the machine has an electronically controlled infeed system with stepper motor drive. Hydraulic longitudinal and rapid traverse table movement. Versatile application in production for external cylindrical and internal internal grinding or for external, face and internal grinding in one clamping Dodpfjuxft Ejx Aizjcp clamping of individual parts. Possible options: -Semi-automatic dressing cycles for external and internal grinding -automatic dressing compensation. -Measuring control

Condition: good (used), Distance between centers: 760 mm Maximum travel on the Z axis: 650 mm Maximum grinding length: 430 mm Maximum grinding diameter: 250 mm Height of centers: 125 mm Maximum grinding wheel diameter: 500 mm Maximum travel on the X axis: 320 mm CNC brand: FANUC CNC model: 18TB Main motor power: 7.5 kW Z and X axis resolution: 0.1 µmm Workhead taper: MORSE 5 Workhead hole diameter: 38 mm Tailstock taper: MORSE 4 Workhead rotation speed: 8 to 800 rpm Djdpfx Aijv Tmtlozecp Dimensions (length x width): 2500 x 2000 mm Weight: 4700 kg

Condition: used, TECHNICAL DETAILS - Table dimensions : 800 X 400 [mm] - Z stroke : 390 [mm] Dodpfx Aioy Abbzszscp - Maximum weight upon table : 500 [kg] - Grinding wheel diameter : 355x50x127 [mm] - Machine weight : 3700 [kg] - Supply voltage : 380 [V]

Condition: used, Technical details: grinding diameter: 600 mm grinding length: 2600 mm centre height: 180 mm workpiece diameter - max.: 360 mm swing diameter: 600 mm grinding wheel diameter: 600 x 305 x 160 mm total power requirement: 17,6 kW coolant device: 90 l/min work piece spindle speed: 12,5-250 U/min feed continuous: 0,05 - 6,0 mm Dcsdpfsw Rktbjx Aizep weight of the machine ca.: 8,2 t dimension machine xH: 6,4 x 2,2 x 1,9 mm Final balance balancing device Tailstock with cylinder error correction Digital display X=0.001 - Z=0.01 Radius device 2-10 mm *

Year of construction: 1979, condition: refurbished (used), functionality: fully functional, TECHNICAL DETAILS Maximum height: 125 mm + 50 mm height adjustment Distance between centers: 1,000 mm Grinding wheel › Diameter: 400 mm › Width: 50 mm › Bore: 127.0 mm Angle adjustment: 270° Workpiece spindle head: 20 - 400 rpm Spindle taper: 5 MT Tailstock taper: 3 MT Table angle adjustment: 8° Table speed: continuously variable up to 6.0 m/min Internal grinding spindle with 60,000 rpm External grinding wheel motor: 4.0 kW Workpiece spindle motor: 1.5 kW Machine weight: 3,100 kg Overall machine dimensions: 2,860 × 1,680 × 1,670 mm (L × W × H) EQUIPMENT & SCOPE OF DELIVERY • Machine completely refurbished • New control cabinet & new wiring diagram • New motor & frequency inverter for the working head Dcodpfx Aisk H Hp Nozop • 2-axis DRO • Coolant tank with paper filter • Geometry manufactured according to the Kellenberger protocol • Internal grinding spindle • Numerous accessories Please refer to the test report for the machine in the appendix below.

Condition: used, Technical details: swing diameter: 200 mm centre distance: 450 mm Dcedju Ng Dgepfx Aizsp cross travel: 245 mm longitudinal feed: 830 mm table speed: 0,05-4,5 stufenlos m/min revolution per minute: Schleifspindel 1780, 2050 U/min revolution per minute: Werkstückspindel 50-500 U/min dimensions of grinding wheel: 350x32x127 mm Table dimensions: 2200x280 mm table swivelling to both sides: 9°vor+10°zurück Grad total power requirement: 6,0 kW weight of the machine ca.: 2,2 t dimensions of machine: 2,2x2,05x1,6 m Universal Center Grinding Machine without internal grinding device! - for precision grinding of outer, inner such as cone surfaces - feed of grinding headstock via hydr. or manual possible - table feed hydraulic stepless - grinding spindle swivelable with 60 degrees - workpiece headstock 90 degress swiveable with tapper MK4 - tailstock tapper MK 3 equipment: - dressing device/extruder - coolant tank incl. pump and supply i.D. *

Condition: good (used), Distance between centers: 1000 mm Center height: 175 mm CNC brand: FANUC Dcsdpfetrgn Tox Aizjp CNC model: Oi-TD

Condition: used, Technical details: grinding length: 300 mm centre height: 175 mm swing diameter: 315 mm table clamping surface LxW: 1.800 x 200 mm control: Heidenhain Longitudinal adjustment of grinding unit on table max.: 1100 mm work piece spindle speed: 3steps/1500-2200 U/min feed continuous: 0,001-1 mm Max. travel x-axis: 300 weight of the machine ca.: 3,1 t dimension machine approx.LxWxH: 2,9 x 1,6 x 1,4 mm Swivel for right and left machining Automatic table reversal Tailstock: MK3 holder Operation: Manual control unit/foot switch Coolant: System with feed Heidenhain measuring device Dsdpfx Aozaunzoizecp *

Condition: used, grinding diameter 800 mm grinding length 4000 mm Control SIEMENS Simatic OP3 grinding wheel diameter 800 mm spindle speeds 0 - 70 mm voltage 400 V 2 x Heavy Duty Steadies Coolant System The tech. Data are manufacturer or operator information and therefore non- Dcsdeyqtwijpfx Aizjp binding. We reserve the right to prior sale; Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team

Condition: used, Year of construction: 1995, grinding diameter 350 mm Dsdpfx Aoxyadaoizjcp grinding length 1000 mm centre height 175 mm Completely overhauled in 2013 Heavy duty workpiece headstock tailstock Without chuck and without bezel in the photo Kelco 90 control The machine can be viewed in operation at the customer's premises from 2025 up to and including January 2026.

Condition: used, grinding diameter 360 mm grinding length 1000 mm centre height 260 mm grinding wheel dia. x width 500x80 mm The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale; Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop Dcsdpsyqv Udsfx Aizjp If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team

Year of construction: 1975, condition: ready for operation (used), machine/vehicle number: M-27 738, Center hight: 165 mm Center width/grinding length: 1000/1075 mm Gr. Grinding diameter: 250 mm Table swivel: +/- 8° Gr. Table longitudinal movement: 1210 mm Workpiece spindle stick swivel: 0 - 90° Spindle bore/cone: 38 mm/MK 5 Dcedpfxjd Rv Rbo Aizsp Grinding spindle stick easily swivelling Hydr. Quick adjustment approx.: 50 mm Grinding wheel dimensions: 400 x 50 x 127 mm 2 grinding wheel speeds due to V-belt step disc Drive power: 3 kW Space requirement: 2900 x 2200 x 1750 mm Weight: approx. 3.5 t

Condition: used, Year of construction: 2000, grinding length 800 mm centre height 150 mm Control FANUC grinding wheel size max. 400 x 63 x 127 mm workpiece weight 120 kg Dsdpfx Aiju Hag Njzocp engine output 7,5 kW turning speed range - grinding wheel 45 m/s m/s swivelling range +45/-15° Grad work piece spindle speed 22-313 / 51-750 U/min workpiece spindle swivable +/- 90 ° tailstock quill taper MT MK 4 x-travel 355 mm z-travel 4,0 mm Working speed 0 + 7,5 m/min weight of the machine ca. 4,0 t dimensions of the machine ca. BTH 3,7 x 2,2 x 1,9 m -incl. Coolant system -incl. Lynette -incl. Sharpening diamond -incl. open Lynette -incl. 3 pieces of grinding discs -incl. 3 pieces of flanges -incl. Internal grinding spindle attachments

Condition: reconditioned (used), KELLENBERGER KEL-VISTA UR 175X600 is a CNC cylindrical grinder engineered for precision, high accuracy and reliability. Capacity: centre height 175 mm; between centres 800 mm; grinding length 600 mm; max Ø 349 mm; max weight 100 kg. Key specs: Z 750 mm; X 320 mm; left wheel Ø400×80×127, right Ø300×40×127; wheel speeds 875–1900 rpm (stepless); wheel motor 5 kW; work spindle 8–800 rpm (stepless), taper 5 CM; rapid 12 m/min; air 6 bar; 3×400 V 50 Hz; machine ≈3000 kg; 3200×1700×2000 mm. Accessories: coolant, coolant-through-spindle (IKZ), paper filter, MARPOSS probe, MOVOMATIC measuring control, internal grinding attachment, balancing, RS‑232. Suited for tight tolerances in automotive, watchmaking, machine tools, aerospace, medical. Dcsdpfeyxn Iysx Aizjp