Used eccentric presses single column 55-99t for sale (122)

Condition: used, Year of construction: 1996, pressure 80 t throat 320 mm stroke 6 - 118 mm no. of strokes 30 - 80 Hub/min ram adjustment 70 mm table surface area 830 x 610 mm ram surface 650 x 400 mm column daylight (nach hinten) 630 mm total power requirement kW weight of the machine ca. 8,1 t dimensions of the machine ca. B 1,2 x T 1,9 x H 3,3 m Furnishing: - with gear transmission - fixed table - automatic stroke adjustment - automatic ram adjustment - hydr. Overload - Ejector - Grease central lubrication Hfsdstycdkspfx Ah Dsr - Cover plate for drainage hole - Continuous speed control using a frequency converter - Machine is technically checked in our company and receives a new control cabinet with safety controls and touchscreen - current UVV test with braking time measurement

Condition: used, Year of construction: 1959, pressure 063 t throat 280 mm stroke 8 - 100 mm no. of strokes 65 /min distance table/ram, max. stroke up, adjustment up 550 mm table surface area 630 x 500 mm hole in the table 230 mm table height over floor 740 mm table adjustable 200 mm ram surface 320 x 260 mm ram adjustment 63 mm power capacity 5,5 kW weight 4,6 t Dimensions (WxDxH) 1,4 x 1,8 x 2,4 m permitted for manual loading according to the German Safety Regulations (UVV) with motor, friction clutch, mechanical overload protection in ram, manual stroke adjustment, manual ram adjustment, adjustable table, manual centralized lubrication, two-hand operation Press is currently under revision Hsdpfx Ahjvuk Rwe Dsfr

Condition: good (used), Weingarten Eccentric Press AV10 - with gripper feed - uncoiler and recoiler - During pressing, the speed can be adjusted via frequency converter - Pressing force: 10 t - Strokes per minute: 160 - Ram stroke: 6-60 mm - Ram adjustment: 40 mm Good condition, fully functional, can be inspected and tested under power on site. Hjdjx Emvvopfx Ah Defr Shipping also possible abroad. Inspection: I would like to point out that, to avoid misunderstandings, the item can be viewed and tested under power before purchase. Please ask any questions prior to purchase to avoid uncertainties. Should you have any general questions or wish to arrange an inspection appointment, I am available at the phone number listed below or above at any time. Subject to prior sale and errors in the description. VAT will be shown separately on my invoices. Shipping by freight company.

Condition: excellent (used), functionality: fully functional, I am selling this line, which consists of the following press, decoiler, straightener, and Rebenda VP 205 CNC roller feeder. The line has been dismantled and stored in a warehouse. Excellent condition, regularly maintained. Hjdpfsxz Dnxsx Ah Dsfr

Condition: defective spare-parts repository (used), Year of construction: 1974, functionality: not functional, machine/vehicle number: 121645, table height: 910 mm, table width: 650 mm, stroke adjustment: 63 mm, overall weight: 4,000 kg, pressing force: 63 t, space requirement length: 1,200 mm, space requirement width: 1,900 mm, space requirement height: 2,800 mm, The eccentric press has a clutch defect and is currently non-operational. Hfjdpfex D Tngjx Ah Djr Without the column stand mounted in the pictures.

Condition: good (used), functionality: fully functional, tested machine : Power 75 tons Stroke rate 90 strokes throat depth 300 mm ram stroke 16 - 140 mm ram adjustment 80 mm Hsdpfx Aox Dht Deh Defr with shield , . new UVV-tested .

Condition: used, Year of construction: 1998, pressure 80 t throat 335 mm stroke 8 - 100 mm no. of strokes 60/90 Hub/min table surface area 900 x 670 mm hole in the table 280 x 200 mm dayligth max. 450 mm ram adjustment 80 mm ram surface 700 x 450 mm Hfedpfx Ahjuild Ao Der tool dimension, max 700 x 450 mm weight of tools max. 140 kg total power requirement 11,07 kW weight of the machine ca. 6,5 t dimensions of the machine ca. BxLxH 1,72 x 2,0 x 2,82 m

Condition: used, Year of construction: 1985, Pressure 080 t throat 345 mm stroke 20 - 160 mm no. of strokes 65 /min distance table/ram, max. stroke up, adjustment up 495 mm table surface area 920 x 610 mm table height over floor 800 mm Hole in the table 280 mm Hjdpfjvuug Nsx Ah Dsfr passage to the back 670 mm ram surface 650 x 400 mm ram adjustment 50 mm power capacity 10,0 kW weight 7,7 t Dimensions (WxDxH) 1,5 x 2,2 x 3,15 m permitted for manual put-in according to the German Safety Regulations (UVV) with motor, pneumatic clutch, hydraulic overload protection in ram, manual stroke adjustment, motoric ram adjustment, motoric centralized lubrication, two-hand operation Press is at the moment being overhauled electrically and mechanically - video is from before starting the overhaul WITH mechanical partly overhaul, WITH new electrical control Pilz

Condition: used, Year of construction: 1999, Manufacturer: Ebu Model: STA 100/1000 P2 Serial number: 54203/05G Year of manufacture: 1999 Pressing force: 1,000 kN Stroke adjustment: 8 - 140 mm Ram strokes: 50 – 180 strokes/minute Location: 41751 Viersen, Germany Condition: Used, functional Price: €36,974 net / €44,000 gross You are welcome to submit a price offer. Reasonable counteroffers will be considered. When making inquiries, please include your complete contact details. Additional photos available upon request. Hfjdpfjx Ea Shox Ah Djr You are also welcome to view the machine on site. Simply call us to schedule an appointment. This item is being sold as part of insolvency proceedings and shows signs of use accordingly. Maintenance and professional cleaning are the responsibility of the buyer. Sale is made without any warranty. Liability, reduction, and rescission are expressly excluded. We recommend inspection prior to purchase, as the item is sold as seen. All information provided is without guarantee. Subject to errors and prior sale. The item is sold as inspected on site, in used condition, with retention of title, and under exclusion of any liability for visible and hidden defects, in particular technical, qualitative, or performance-related defects and usability. Due to time constraints, only serious inquiries and reasonable offers will be answered! This is solely an advertisement for informational purposes. Inspection by appointment only! Best regards

Condition: good (used), Year of construction: 1986, functionality: fully functional, Pressing force: 1250 kN, stroke rate: 55 min⁻¹, ram adjustment: 75 mm, stroke: 20–120 mm, motor power: 11 kW, voltage: 380 V, machine weight: 8.6 t, throat depth: 340 mm, ram clamping surface: 620 x 300 mm, table clamping surface: 650 x 1000 mm, Ortlinghaus hydraulic clutch with double brake, two-hand control, ram damage has been professionally repaired. Hfsdoxxa Aaopfx Ah Dor

Condition: used, Year of construction: 1981, total height: 2,300 mm, total width: 1,100 mm, total length: 2,000 mm, Empty weight: 500 kg Price: On request - Year: 1981 - Documentation available: No - CE certificate present: No Hfedpfsxhcgyex Ah Djr - Table width: 505mm - Throat depth: 250mm - Table length: 710mm - Ram width: 280mm - Ram length: 450mm - Power: 63.0ton - Transport dimensions: 2000mm x 1100mm x 2300mm (l x w x h) - Transport weight [kg]: 500kg - Transport packages [pcs.]: 2 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: used, Year of construction: 1969, Technical details: pressure: 55 t throat: 250 mm no. of strokes: 120 Hub/min Hsdpfx Ahjxu Dwmj Defr daylight dimension : table/slide up: 380 mm ram adjustment: 55 mm sheet thickness continuous stroke : 2,25 mm ram stroke range: 6 - 90 mm total power requirement: 8,8 kW weight of the machine approx.: 2,75 t dimensions L x W x H: 1,4 x 1,2 x 2,2 m

Year of construction: 1980, condition: used, pressure 80 t Hsdpjdlcy Hofx Ah Dsfr throat - mm stroke 50 mm table surface area 875 x 695 mm ram surface 350 x 355 mm ram adjustment 71 mm no. of strokes 30 - 90 Hub/min distance between columns 450 mm weight of the machine ca. 6,2 t dimensions of the machine ca. 2,0 x 2,1 x 3,2 m daylight (stroke down, ram adjustment above) 480 mm Further information: - the machine is currently being a partially overhauled - the machine was re-equipped with the following components: * separate control cabinet with touchscreen including cabling * new painting of the individual components in the dismantled state After the partial overhaul, the machine is safe for manual insertion open tool, a current UVV test is carried out before delivery and braking time measurement.

Condition: used, Year of construction: 1981, pressure 080 t throat 345 mm stroke 8 - 112 mm Stroke rate 65 / min Distance table/ram, max. stroke up, adjustment up 472 mm Table surface area 840 x 610 mm Hole in the table 280 / 315 mm Table height above floor 800 mm Passage to the back 500 mm Ram surface 650 x 400 mm Hedpfevuua Asx Ah Defr Ram adjustment 70 mm Power capacity 7,5 kW Weight 6,8 t Dimensions (WxDxH) 1,2 x 1,95 x 3,05 m permitted for manual put-in according to the German Safety Regulations (UVV) with motor, pneumatic clutch-brake combination, hydraulic overload protection in ram, manual stroke adjustment, manual ram adjustment, pneumatic counterbalance in ram, motoric centralized lubrication, two-hand operation

Condition: new, Year of construction: 2026, throat depth: 260 mm, table width: 520 mm, table length: 720 mm, stroke adjustment: 100 mm, pressing force: 60 t, stroke length: 100 mm, power: 4 kW (5.44 HP), warranty duration: 24 months, Equipment: safety light barrier,  Steel construction body,  Vibrational stress relief will be applied to the body and welded components.  Parallelism and perpendicularity tolerance between tables in accordance with ISO and DIN standards  Pneumatic clutch and brake combination – OMPI-Italy  Slide guided ram (8-point slide guidance)  Components such as ram, connecting rod, ram nose are made from cast steel, GS52  High-strength monoblock crankshaft – 4140  Equipped with spare bolster plate  Ratchet device for table-to-ram adjustment  Automatic central lubrication  Hydraulic overload protection  Pneumatic pedal with latching, and dual-hand control with timer  Electric counter  PLC application and touch screen – DELTA  Electrical switchgear – SIEMENS-SCHNEIDER  Dual-coil safety valve – GPA, TOPAIR  CE certification  Light curtain finger protection barriers – SICK, LEUZE, KEYENCE  Safety PLC (controls the entire electrical system, valve, dual-hand, and pedal) – PILZ  Position-locked limit switch and electrical panel  Safety support block  Protective guards in accordance with CE requirements TYPE: A TYPE MONOBLOCK FRAME Capacity: 60 tons Throat Depth: 260 mm Table to Ram Distance: 360 mm Slide to Table Distance: 395 mm Distance Between Side Frames: 440 mm Ram Adjustment: 70 mm Approx. Press Width: 800 mm Approx. Press Depth: 1450 mm Approx. Press Height: 2100 mm Hfjdexrkr Sopfx Ah Dsr Front Anchor Dimensions: 680 mm Side Anchor Dimensions: 875 mm Table Hole Diameter: 150 mm Table Size: 520 / 720 mm Die Clamp Slot Diameter: 40 mm Ram Size: 340 / 220 mm Floor to Table Height: 730 mm Stroke Adjustment: Add. 95 mm Strokes per Minute: 55 spm Motor Power: 4 kW Motor Speed: 1450 rpm Approximate Weight: 3,500 kg

Condition: used, Year of construction: 2008, pressure 63 t throat ca. 280 mm stroke 8-100 mm no. of strokes 60-130 Hub/min Hfsdjxu Nw Sjpfx Ah Dor ram - range of adjustment 80 mm weight of the machine ca. 4,3 t

Condition: excellent (used), Year of construction: 2020, functionality: fully functional, We are offering a beautiful eccentric press from Schuler/Beutler Nova AG, model CFL63c C-frame. The machine is under power, ready for demonstration and can be tested on site. It is suitable for both safeguarded and non-safeguarded tools. Technical data and information: Year of manufacture: 2020 Control system: CCS/PNOZmulti Rated power: 4 kW Rated force: 630 kN Working energy (J): 2750 Max. strokes in continuous operation (min-1): 30 - 120 Max. strokes in single stroke mode (min-1): 60 Table dimensions: 820 x 590 mm Ram dimensions, max. tool size: 470 x 415 mm Hodpfx Ahjxt Nxts Dsfr Ram bore Ø: 50 mm Max. weight of upper tool (kg): 200

Condition: good (used), 4 x eccentric press Hfedpfx Aheq Rdr Tj Djr Ebu / Weingarten consisting of the following types: 1 x Ebu 15 1 x Ebu 25 2 x Ebu 35 1 x Weingarten A 40 The machines can be inspected on site.

Year of construction: 1990, condition: used, pressure 80 t throat 250 mm stroke 5/95 mm table surface area 805 x 510 mm distance table/ram Hub unten - 400 mm Hsdsfn Aqnopfx Ah Djfr tool hole in ram 45 mm ram adjustment 100 mm ram surface 360 x 300 mm no. of strokes 55 Hub/min total power requirement 5,5 kW weight of the machine ca. 4 t dimensions of the machine ca. 0,83 x 1,7 x 2,6 m

Condition: used, Year of construction: 1978, pressure 063 t throat 450 mm stroke 8 - 100 mm no. of strokes 65 /min distance table/ram, max. stroke up, adjustment up 415 mm table surface area 720 x 800 mm hole in the table 280/250 mm table height over floor 800 mm passage to the back 290 mm ram surface 450 x 280 mm ram adjustment 63 mm Hfodpfx Aevzxn Dsh Djr power requirement 7,5 kW weight 4,7 t dimensions (WxDxH) 1,3 x 2,0 x 2,65 m year of manufacture 1966 - modernized 1978 permitted only for safe tools or fixed screen according to the German Safety Regulations (UVV) with pneumatic clutch, mechanical overload protection in ram as is where is, partly dismantled, WITHOUT putting into operation Price for commissioning (in given condition) on request

Year of construction: 1974, condition: used, machine/vehicle number: P52111974, Item number: MA909 Manufacturer: Ebu Type: SK 75 Year of manufacture: 1974 Machine no.: P 5211974 length [mm]: 1700 width [mm]: 1200 height [mm]: 2450 Weight [kg]: Approx. 4500 Connected load: 380V Stroke [mm]: 16-140 throat [mm]: 300 Punching force [to]: 75 Table size LxW: 800 X 620 Machine data: Stroke rate 105 / min Stool adjustment 80mm Table adjustment Control system: Set Up Hsdpfjcanfwsx Ah Djfr Single stroke foot Continuous run Accessories: Protective screen

Condition: ready for operation (used), Eccentric Press Machine, AUG. RUHRMANN E100R, Used Machine Manufacturer: AUG. RUHRMANN Maschinenfabrik GmbH & Co. KG Type: E100R Serial Number: 14339 Year of Manufacture: 1997 Technical Data Nominal pressing force: 1000 kN (100 tons) Stroke length: 20 – 130 mm Max. installation height (at bottom dead center): 580 mm Stroke adjustment: max. 100 mm Max. flywheel speed: 230 1/min Number of strokes in continuous operation: 60 1/min Hsdpfx Ajxnqrdsh Djfr Max. clutch engagements: 16 1/min Standard crankshaft stop point: 15° after B.D.C. Max. tool size: 580 × 380 mm Max. tool part weight: 70 kg Operating pressure of clutch system: 6 bar Compressed air connection: 6 – 8 bar Total drive power: 7.5 kW Safety distance: 345 mm Overrun time: 215 ms Table size: 1100 × 660 mm Operating hours: 70,797 Overall dimensions Width: 2000 mm Depth: 1700 mm Height: 3020 mm Weight (without tools and accessories): 7000 kg

Condition: good (used), Manufacture: Digép Hfsdpfjiukrrjx Ah Dor Type: SD63 Push force: 63t Table: 560 x 740 mm Stroke length: 200 mm Net weight: 4t

Year of construction: 1979, condition: used, pressure 75 t throat 260 mm stroke 16-80 mm table surface area 800 x 520 mm distance table/ram 350 mm strokes - infinitely variable 50 - 250 Hub/min ram surface 400 x 300 mm ram adjustment 70 mm total power requirement 7,5 kW dimensions of the machine ca. 2,7 x 1,7 x 2,6 m weight of the machine ca. 4 t hole in the table 260 x 180 mm Hodpfxefn Ap Ds Ah Defr - pneumatic Ortlinghaus air clutch with additional brake - Infinitely variable speed control using a Stöhrer drive - break plate - 2 hand control - additional clamping plate - Air storage tank for clutch - Circulating oil lubrication

Condition: used, Year of construction: 1971, Pressure 063 t throat 250 mm stroke 16 - 90 mm no. of strokes 60 /min distance table/ram, max. stroke up, adjustment up 350 mm table surface area 730 x 500 mm hole in the table 180 x 180 mm table height over floor 710 mm ram surface 350 x 220 mm ram adjustment 50 mm Hodpfxsvut T Uo Ah Dofr dimensions (WxDxH) 1,3 x 2,2 x 2,4 m permitted only for safe tools or fixed screen according to the German Safety Regulations (UVV) with motor, pneumatic clutch (Ortlinghaus), manual stroke adjustment, manual ram adjustment, fix table as is where is, WITHOUT putting into operation