Used eccentric presses single column 55-99t for sale (122)

Condition: good (used), Nominal force : 63 tN Force point : 23 mm Cadence : 70 g.p.m. Height adjuntment of slide : 70 mm Course. : 12-110 mm Tool holder hole : 50 mm Ejector course : 56 mm Hedpfx Aegrk Ayjh Defr Neckline : 250 mm Dimensions slide base IDxFA: 500x350 mm Dimensions of the movable plate IDxFA 200x500 mm Movable plate thickness 85 mm Height between slide and movable plate 250 mm Opening between uprights 415 mm Movable plate hole diam. 280 diam 250 mm Movable plate ring hole diam.140 mm Total energy: 115 kgs Steering Wheel straps : B-92 Table dimensions IDxFA 810x520 mm Table hole 335x250 mm Pressure required for clutch or trigger 5,5 kg/Ca Main engine 75 Cv 1450 rpm Connected to 380 v Frequency 50 Hz

Condition: new, Year of construction: 2025, functionality: fully functional, table width: 850 mm, table length: 570 mm, total width: 1,265 mm, overall weight: 5,500 kg, pressing force: 60 t, C-frame eccentric press 60 t. NEW Press force: 60 t Rated capacity point: 4 mm Max. closed die height: 310 mm Stroke adjustment (semi-automatic): 20/100 mm Speed: 60 SPM Die fastening hole diameter: 50 mm Throat depth (centre of hole to back): 275 mm Ram stroke adjustment: 80 mm Ram dimensions: 580 x 350 mm Table dimensions: 850 x 570 mm Table hole diameter: 150 mm Table height above floor: 795 mm Weight approx. 5,000 kg Hfsdpfxsxtplts Ah Djr Height: 2,430 mm Depth: 1,370 mm Width: 1,265 mm Motor: 5.5 kW

Condition: reconditioned (used), Year of construction: 2008, Nominal Press Force: 800 kN Ram Stroke, adjustable in steps: 30...120 mm Ram Adjustment: 100 mm Throat Depth: 300 mm Stroke Rate at Idle: 70 / min Continuously Adjustable Stroke Rate: 40 - 130 /min Die Height at Maximum Stroke (bottom) and Adjustment (top): 400 mm* Table Clamping Surface (W x D): 1,200 x 600 mm Ram Clamping Surface (W x D): 600 x 450 mm Ram Bore (pin bore): 50 H7 mm Main Motor Power: 7.5 kW Approx. Machine Height: 3,250 mm Machine Weight: 7,500 kg - With hydraulic overload protection, fully automatic ram adjustment, semi-automatic stroke adjustment, latest UVV (accident prevention regulations) - With Siemens S7/300 control, touch operation on movable operator panel - Two-hand operation, stroke gate protected by limit switches Hsdpfx Ahow Ec A Eo Dofr - Centering groove - Roller feed: Servo 300 (strip width 300 mm, strip thickness: 4 mm, cross-section: 1000 mm²) - Roll block strips - Anti-vibration feet

Condition: excellent (used), Machine type: Eccentric press / high-speed punch press. Nominal pressing force: 62–63 t. Stroke frequency: 65–110 strokes/min. Application (original): production line for L-type staples (length 4–50 mm) Condition: used, operational / in use; ready for testing by arrangement Availability: immediately available. Hfodpfxexm S E Ns Ah Dsr

Condition: new, Year of construction: 2025, throat depth: 280 mm, ram adjustment: 85 mm, table height: 755 mm, drop-through hole in table: 190 mm, table width: 540 mm, table length: 740 mm, stroke adjustment: 100 mm, pressing force: 80 t, ram bore: 40 mm, power: 7.5 kW (10.20 HP), punching force: 80 t, Equipment: safety light barrier, A TYPE ECCENTRIC PRESSES GENERAL FEATURES  Steel construction body,  Stress relief will be applied to the body and welded parts with vibration.  Parallelism and perpendicularity tolerance between tables in accordance with ISO and DIN standards  Pneumatic clutch and brake combination – OMPI-Italy  Ram supported by 8 slides  Parts such as ram, connecting rod, claw are cast steel, GS52 Hfodpevxtgiefx Ah Dsr  High strength solid crankshaft – 4140  Inside of connecting rod will be bronze, (Zr14)  With spare table,  With hydraulic fuse  Ratchet apparatus table-ram adjustment  Automatic central lubrication,  Pneumatic pedal with ratchet and double hand control with time adjustment,  With electric counter,  PLC application and touch screen – DELTA  Electrical switchgear materials – SIEMENS-SCHNEIDER  Double coil safety valve – GPA, TOPAIR  Locked position switch and panel,  OPTIONAL FEATURES  CE application  Finger protection beam barriers – SICK, LEUZE, KEYENCE  Security PLC (Controls the entire electrical system, valve, double and pedal) – PILZ  Safety wedge,  Protective enclosures will be within the scope of CE.  Speed Control Application  Automatic Lubrication System BODY A TYPE MONOBLOCK BODY TYPE A SERIES Capacity 80 Tons Throat Depth 280 Mm Table-Ram Distance 400 Mm Slide-Table Distance 420 Mm Wall Distance 470 Mm Ram Adjustment 85 Mm Press Width 1000 Mm Press Depth 1735 Mm Press Height 2300 Mm Front Anchor Dimension 720 Mm Side Anchor Dimension 1040 Mm Table Hole Diameter 190 Mm Table Size 540 / 740 Mm Mold Clamping Housing Diameter 40 Mm Ram Size 370 / 230 Mm Floor Table Dimensions 755 Mm Stroke Adjustment 10 / 100 Mm Stroke Number/Minute 50 Units/Min. Motor Power 7.5 KW Motor Speed 1450 RPM Weight 4,500 Kg ROLL UNCOUNTER AND ROLL DRIVER WILL BE PRICED EXTRA IF REQUESTED. IT IS NOT INCLUDED IN THE PRICE OF THE PRESS.

Condition: excellent (used), Year of construction: 2002, functionality: fully functional, machine/vehicle number: 65/2/158/02, throat depth: 280 mm, table length: 580 mm, total width: 820 mm, pressing force: 65 t, stroke length: 120 mm, punching force: 65 t, Used 65ton mechanical power press for sale Hjdsxqn Unjpfx Ah Dofr Video at the bottom of this listing MODEL 65 CNR 4 SERIAL N° 65/2/158/02 NOMINAL FORCE (Max stroke) 650 [ KN] MACHINE WEIGHT 5000 [ daN] NOMINAL SPEED 73 [ C/min ] VARIABLE SPEED MIN/MAX [ C/min ] MAXIMUM CLUTCH ENGAGEMENTS 36 [ C/min ] CLUTCH PRESSURE MIN/MAX 4 / 5,5 [ bar) MAXIMUM STOPPING TIME 0,154 SAFETY DISTANCE 246 [ mm ] FLYWHEEL ENERGY 3440 [ KJ] STROKE LENGTH MIN/MAX 10 / 120 [ mm ] RAM ADJUSTMENT 100 [ mm ] SHUT HEIGHT S.D.A.U. 320 [ mm ] MAXIMUM EJECTOR STROKE 40 [ mm] TABLE SIZE 68 / 580 / 820 [ mm ] RAM SIZE 340/ 470 [mm] TOOL SPIGOT DIA 45 [ mm ] THROAT DEPTH 280 [ mm ] MAX TOOL SIZE 340 / 470 [ mm ] MAX TOP TOOL WEIGHT 136 [ daN]

Condition: ready for operation (used), Eccentric Press, Eccentric Press 63t, Aug. Ruhrmann E63 R, Used Machine Manufacturer: Aug. Ruhrmann Maschinenfabrik GmbH Type: E63 R Weight: 4300 kg Year: 1996 Overall dimensions: 1650 x 2500 x 3000 mm Stroke length: 8–100 mm Table size: 450 x 310 mm Electric power: 5 kW Air pressure requirement: 6–8 bar Stroke mode: Continuous / Single stroke operation Hfodjw Hrwuepfx Ah Der Two-hand control Base plate is not included with the machine.

Year of construction: 1972, condition: used, machine/vehicle number: 51512/72, pression: 75 t throat: 300 mm table size: 620 x 800 mm clearance hole in the die: 225 x 325 mm table adjustment: 175 mm tappet area: 180 x 475 mm tappet adjustment: 80 mm stroke adjustment: 16 - 140 mm number of strokes: 90 /min engine: 380 V, 3 kW space needed: 1700 x 1200 x 2500 mm weight: 3,3 t Hodpfjb Tdquox Ah Dsfr

Condition: used, Single-column eccentric press WEINGARTEN type EV 63 Machine. No. 738 / 61 Year of construction 1962 Pressure capacity 63 ton. throat 260 mm Table surface 630 x 530 mm Table opening Ø 210 mm ram surface 315 x 260 mm Plunger stroke adjustable 8-100 mm Plunger adjustment 63 mm Installation height max 450 mm Stroke rate 115 strokes / min. Compressed air requirement min. 4.5 bar Motor power 4 kW Mains connection 380 Volt, 50 Hz Table height above floor approx. 750 to 900 mm - Electric lift release via foot switch or two-hand operation - Overload protection by breaker plate - Clutch/brake combination with WEINGARTEN friction threaded clutch with TDC overrun protection Hedpfx Ahsk S Htxe Dsfr - Front crankshaft support bearing - Press table height-adjustable via 2 threaded spindles - Manual central grease lubrication - Control cabinet adjacent - UVV for manual insertion work Space requirement L x W x H 1750 x 1600 x 2430 mm Weight 4.5 tons good condition

Condition: good (used), Year of construction: 1962, machine/vehicle number: 5601062, Offer 24287 Technical data: - Compressive force 60 t - Projection 350 mm - Table size approx. 900 x 600 mm - Table height adjustable - Drop-through hole in table approx. 300 x 200 mm - Maximum installation height approx. 360 mm - Plunger surface approx. 340 x 160 mm - Pivot hole in plunger 40 mm - Plunger adjustment 60 mm - Stroke adjustment 10 - 90 mm - Stroke rate 110 1/min - Rotary wedge clutch - Drive 400 V / 5.5 kW Hfedpou Ilkisfx Ah Dsr - Space requirement approx. W 2000 x H 2200 x D 2400 mm - Weight approx. 3500 kg

Condition: good (used), Year of construction: 1984, functionality: fully functional, pressing force: 63 t, Band saw LEN63C Hodju Nkfuspfx Ah Defr

Condition: good (used), Year of construction: 1977, Type EL 35 B Year of manufacture 1977 Machine no. 5182 Pressing force at 30° before BDC 35 t 350 kN Adjustable stroke 12 - 80 mm Adjustable ram 70 mm Hsdswxxr Aspfx Ah Defr Ram strokes per min. 110 Adjustable table 150 mm Safety distance 150 mm Overrun distance 50 Weight 2050 kg

Condition: good (used), Year of construction: 1989, functionality: fully functional, total height: 25,500 mm, table width: 800 mm, table length: 630 mm, stroke adjustment: 105 mm, total width: 14,250 mm, total length: 17,900 mm, overall weight: 5,850 kg, pressing force: 63 t, height adjustment type: mechanical, power: 7.5 kW (10.20 HP), Eccentric press LEN 63C. Year prod. 1989(SMERAL TRNAVA Czech Republic). Technical data: - pressing force: 63 tons - number of strokes in automatic: 65/130 min - number of jumps manual operation: 45/50 min - slider stroke adjustment: 10-105 mm - slide stroke: 70 mm - table surface: 800 x 630 mm - slider surface: 450 x 280 mm - overhang: 315 mm - table - slider clearance: 335 mm - clearance between columns: 355 mm - number of gears: 2 - motor speed: 730/1440 min - motor power: 4/7,5 kW - press dimensions: 1425 x 1790 x 2550 mm - weight: 5850 kg Hfedpstzxdzofx Ah Dor The technical condition of the machine is good. It is possible to make a visual inspection and check the machine in operation.

Condition: good (used), throat depth: 400 mm, ram adjustment: 80 mm, pressing force: 80 t, Capacity: 80 Ton Table surface: 750 x 550 mm Ram Adjustment: 80 mm Stroke length: 8 -112 mm No. of strokes: 78 p/min. Throat: 400 mm Hsdpfxeugtkxj Ah Djfr Complete with: - Pneumatic clutch - Safety screen Country of origin: Germany Machine LxWxH: 2000 x 1200 x 2900 mm Machine weight: 7000 kg

Condition: used, Single-column eccentric press WEINGARTEN type ER 63 Machine. No. 52A / 63 Year of construction 1963 Pressure capacity 63 ton. throat 280 mm Table surface 630 x 530 mm ram stroke adjustable 8-100 mm ram adjustment 63 mm Stroke rate 65 strokes / min. Motor power 4 kW Mains connection 380 Volt, 50 Hz - Clutch/brake combination with WEINGARTEN friction threaded clutch - Electric lift release via foot switch - Wheel reduction gear Hedpfolb I Dzsx Ah Dsfr - Overload protection by breaker plate - Front crankshaft support bearing Space requirement L x W x H 1500 x 1100 x 2500 mm Weight 4.5 tons good condition

Condition: good (used), Year of construction: 2002, overall weight: 9,500 kg, pressing force: 100 t, Model: PREN-100 Year: 2002 Weight: 9.500 Kg Rated force: 100Tn Type: Pneumatic clutch eccentric Stop position: 580mm Closing height: 450mm Maximum flywheel RPM: 500mm Travel: 13-130mm Max. carriage adjustment: 80mm Motor: 11 Kw 380 V 50 Hz Min. air pressure : 3,5 - 6 bars Stopping time: 285ms Safety distance: 486 mm Hjdsuif Tkopfx Ah Dsfr

Condition: used, Year of construction: 2018, Nominal pressing force: 4,000 kN Ram stroke, adjustable in increments: 30–160 mm Ram adjustment: 180 mm Throat depth: 515 mm Stroke rate at idle: 45 / min Option: Infinitely variable stroke rate: 10–60 / min Die installation height at max stroke (ram down, adjustment up): 660 mm Table clamping surface (W x D): 1,700 x 1,000 mm Table height above floor: 1,005 mm Ram clamping surface (W x D): 1,100 x 800 mm Pin bore in ram: 65 mm Main motor power: 45 kW Machine height approx.: 4,325 mm Machine weight: 33,000 kg Control - Press safety control with redundant structure and self-diagnosis, including status and error display in plain text Hjdpfow Rbxzox Ah Dofr Stepless stroke rate regulation in the range of 10–60 strokes/min via ABB frequency inverter Control variant – touchscreen TFT color including electronic cam control with tool management and tool protection, with color touchscreen visualization, SIEMENS PLC S7-300, tool data management, counting systems, data transmission via Profibus Fully automatic stroke/ram adjustment Rigidly welded tie rods, clear opening between tie rods: 1,345 mm Swiveling main control panel Non-contact safety device – BWS brand LUMIFLEX mounted at the front of the machine table and/or tool area, each mounted on the tie rods.

Year of construction: 1990, condition: excellent (used), Presskraft 800 kN , Hubverstellung 30 - 240 mm , Stößelverstellung 80 mm , Hübe 30 - 90 / min , Tisch 1.200 x 800 , Durchfalloch 350 x 370 , Stößel 900 x 450 , Aussladung 410 , max. Tisch - Stößel 695 , Auswerfer , Ausweferweg 70 , Stößelgewichtsausgleich , Öl-Luft -Kühlanlage , sichere Steuerung III Höhe 3.600 Hodpfx Aheiuxwqe Dofr Breite 1.660 Tiefe 2.400 Gewicht 12.100 kg

Condition: used, power: 22.06 kW (29.99 HP), punching force: 250 t, EBU eccentric press suitable for inlay work, UV-tested Hfsdpev T Dapefx Ah Dor Stroke adjustment from 10-140 mm Ram adjustment 80 mm Stroke rate 50 /min.

Year of construction: 1971, condition: good (used), Pressing force: 63 t Table: 660 x 480 mm ram: 450 x 280 mm throat: 250 mm Ram stroke: 16 to 125 mm Sheet thickness continuous stroke: 3.2 mm max. distance table ram: 417 mm drop-through hole: 280 x 250 mm Adjustment ram downwards: 70 mm Stroke rate: 80 /min Connection: 6 kW Accessories/equipment: Condition: good Weight: 5 t Dimensions: 1.500 x 1.600 x 2.700 mm Hfodpfx Aeh N S Sdjh Djr

Condition: used, Single-column eccentric press EBU Type 75 SKU Machine no. No. P 4598462 Year of construction 1962 Compressive force 75 ton. throat depth 300 mm Table surface 800 x 620 mm waste hole 325 x 225 mm Plunger surface 470 x 180 mm Clamping pin bore Ø 40 mm Table height above floor 845 mm Stroke adjustment 16 - 140 mm Plunger adjustment 80 mm Installation height max. approx. 420 mm Stroke rate 60 + 105 strokes/min. Motor power 4 kW Mains connection 380 Volt, 50 Hz. - Pneumatic clutch/brake combination EBU - Overload protection with breaker plate in ram - UNIDOR tool monitoring system, type APS MINI - mechanically driven gripper feed with belt straightener OSTERKAMP, type ZPN 200/350 - strip width: 200 mm, feed length: max. 350 mm - Strip thickness: max. 3 mm or approx. 200 x 1.5 mm - 2 speeds due to 2 V-belt stages on the wheel transmission - Two-handed operation - Simple work area shielding for swinging open Hfedpfx Ahodzqlts Dsr - Table height adjustment in lowest position = threaded spindles for adjustment 50 mm below floor level - Control cabinet and control panel for tool monitoring adjacent - Automatic central lubrication - 4 machine feet Space requirement L x W x H 2600 x 2300 x 2450 mm Weight approx. 5.5 tons good condition

Condition: good (used), Year of construction: 2002, overall weight: 5,900 kg, pressing force: 63 t, Model: PREN-63 Year: 2002 Weight: 5900 Kg Nominal force: 63Tn Type: Pneumatic clutch eccentric Normal stop position (PMS): 650mm Hodpfxouifr Hs Ah Defr Closing height (PMI): 350 mm Travel: 10-100 mm Motor: 5,5Kw 380V 50Hz Max. carriage adjustment: 65mm Air pressure: min. 3,5 max. 6 bars Total stopping time: 278ms Safety distance: 445 mm Maximum RPM at flywheel: 600

Condition: used, Year of construction: 1970, machine/vehicle number: 120895, pressure:63 t throat:250 mm stroke:8 - 100 mm no. of strokes:120 Hub/min table::715 x 500 mm Hjdpofx Hv Hjfx Ah Dsfr dayligth:330 mm ram adjustment:63 mm clamping plate:700 x 480 mm hole in the table:240 mm Hole in clamping plate:110 mm dimension of ram:450 x 280 mm weight of the machine ca.:5,5 t dimensions of the machine ca.:1,2 x 1,7 x 2,7 m hydraulic tilting single column eccentric press, tilting in 4 steps, opening to rear (325 x 500mm) and below (360x160mm) with central lubrication via hand pump, additional clamping plate 700 x 480 x 850 mm, two-hand operation, foot-trip operation possible, operating-mode selector for adjustment of continuous or single stroke, emergency cut-off, piece counter, various accessories

Condition: used, Single-column eccentric press RICHTER type PEKRS 80 Year of construction 1970 - overhaul 2024 Compressive force 80 ton. throat depth 350 mm Table size 900 x 650 mm Hole in the clamping table Ø 200 mm ram surface 700 x 500 mm Stroke rate 70 strokes/min. Stroke adjustment 6 - 100 mm ram adjustment 85 mm Installation height max. 400 Clamping pin bore Ø 50 mm Table height above floor 810 mm Motor power 8 kW Mains connection 400 Volt, 50 Hz - ORTLINGHAUS pneumatic clutch/brake combination - HERION XSz 32 press safety valve - Pneumatic ram compensation cylinder - Overload protection with breaker plate in ram - Central grease lubrication with hand pump Space requirement L x W x H 1800 x 1250 x 2830 mm Weight 5.7 tons Very good condition Technically overhauled and converted to the latest UVV with new electrics Control conversion in 05/2024 - suitable for manual insertion work - in accordance with DGUV Information 209-030 Press inspection and Machinery Directive 2006/42/EC Hedpfx Ahoi Db Ibj Djfr Low Voltage Directive 2014/35/EU EN ISO 16092-1: Safety of machine tools - Presses - Part 1: General safety requirements EN ISO 16092-2: Machine tools - Safety of presses - Part 2: Mechanical presses - Control system with plain text error messages and diagnostic screen for rapid fault localization - New electrical cabinet, mounted on the side of the machine - completely based on SIEMENS, with PLC S7-1200 PROFIsafe and 7" TFT touch display - Two-hand control panel with emergency stop and engagement lock - el. foot switch - Cam switch unit with run monitor control - Stroke release via HERION XSz 32 press safety valve with pneumatic pressure compensator - New wiring of the machine - Updated operating instructions The machine is equipped with 6 operating modes: 1 = Set-up 2 = Single stroke two-handed 3 = Single stroke foot 4 = continuous run foot 5 = automatic continuous run 6 = reverse run

Condition: used, Single-column Eccentric Press MÜLLER GEFREES Type 60 SV DK (Identical to ExP60) Very lightly used eccentric press in original condition Machine No. 5250686 Year of manufacture: 1986 Nearly new condition Press force: 60 tons Throat depth: 280 mm Table surface: 740 x 560 mm Ram surface: 385 x 200 mm Through-hole in table: 300 x 200 mm Table surface (intermediate plate): 740 x 560 mm Hsdpfxsi A A Tbe Ah Dsfr Through-hole in intermediate plate: Ø 103 mm Intermediate plate thickness: 70 mm Clamping pin bore: 40 mm Table height above floor: 815 mm (with intermediate plate) Installation height, max.: 275 mm (with intermediate plate) Installation height, max.: 345 mm (without intermediate plate) Stroke adjustment: 10–90 mm Ram adjustment: 60 mm Strokes per minute: 100 Motor power: 3 kW Drive: 380 Volt, 50 Hz - Mechanical rotary wedge clutch with pneumatic actuation - Spring-loaded single-jaw brake, controlled by cam disc - Stroke release via pneumatic footswitch - Overload protection with breaking plate in the ram - Table height adjustment via 2 threaded spindles - Manual central lubrication system by BEKA Schmiertechnik - Operating manual and pneumatic diagram included Space requirement (L x W x H): 1400 x 1100 x 2200 mm Weight: 3.4 tons In very good, almost new condition