Condition: new, Year of construction: 2025, min. / max. veneer thickness 0.4 - 3 mm min. / max. veneer height 12 - 47 mm (optional: veneering up to 60 mm) min. / max. material height 10 - 45 mm min. material width 100 mm min. material length 100 mm material pre-milling 2 motors with power (diamond cutter) 2.2 kW feed motor power 2.2 kW panel desk at eye level : chain feed : loading plate for PVC and ABS edges : Fgeb Hlov Dutbop Rqeb mechanical pressure zone driven by the main pressure roller and a series of pressure rollers to minimize the glue layer : central pressure setting : container for glue granulate : glue application to the material using a glue roller : electronic temperature control, working temperature 180 - 200 °C pneumatic tape cutting guillotine : control lamp for element spacing : double trimming saw for cutting off front and rear excess material : precise linear guides : trimming in motion for high cutting precision : veneering speed 9.5 m / min flat and round milling top / bottom with vertical and horizontal guidance 2 x 0.55 kW, 12,000 rpm. scraper unit: polishing unit top / bottom 2 x 0.18 kW, 50 Hz, 2,800 rpm. height and tilt adjustment: extraction connector 3 x fi 120 mm, 1 x fi 100 mm, roller table extension 250 mm: noise-reducing housing with a window to view the units: trimming unit 0.44 kW glue roller unit 0.55 kW glue tank heater 2.2 kW compressed air connection 6.5 bar total power consumption 9 kW / 400 V dimensions L. 3590, W. 1220, W. 1686 mm weight 1100 kg • Pre-milling with counter-milling cutters placed on heads ensuring the highest quality of processing. • Front and rear cutting with a double saw. Upper and lower milling on a separate cutter. • Radial or flat scraper (to choose from). -polishing unit • Equipped with a control computer with an LCD display. • Very simple operation with switching on/off individual units with a single button. • In a word, an ergonomic and precise machine at a very favorable price offer, unmatched on the global market. • Standard function of a replaceable glue tank.

Condition: good (used), Code: 0086 Brand: EBS - ITALY Model: XB/23 - CE Standard Automatic single-sided edgebander for applying edges in wood, veneer, abs, pvc, melamine, roll materials for joinery workshops, furniture, made-to-measure furniture, kitchens, bathroom furniture, panels and various - CE Standard Technical data: Min/max panel height mm 10/45 Edge thickness mm 3 Feed speed 8 mt/min Feed motor Kw 0,55 Minimum panel length mm 140 Composition: Gluing unit - Glue pot capacity Kg 2 - Absorbed power Kw 3 - Heating time 12 min Roll material cutting shear End trimming unit for edge cutting - Motor absorbed power 0,19 Kw - Cutter rotation speed 12000 rpm - Blade diameter mm 125 - Front copiers Fine finishing unit for top and bottom trimming/edging - N° 2 motors each 0,70 Kw - Cutter rotation speed 12000 rpm - Cutter diameter mm 48 Z3 Telescopic support for panels Feb Hlp Rswayqcjqjgb N° 2 suction inlets diameter mm 100 Compressed air 6 bar Overall dimensions mm 2550 x 900 x 1370 h Weight kg 430

Condition: excellent (used), Year of construction: 2020, Edge thickness 0.4 – 12 mm Roll separation max. 3 x 45 mm or 0.8 x 65 mm Workpiece thickness 8 – 60 mm Feed rate variable 8 – 16 m/min. (*) When selecting the form milling machine, the automatic switchover to 11 m/min occurs. Electrics 400 V – 3 Ph. – 50 Hz Pneumatic connection min. 6 bar Connection value approx. 15.5 kW Total length 6,360 mm GUIDE RAILS for moving the entire machine sideways by 500 mm (3 guide rails firmly anchored to the floor, working height of the machine 1,050 mm) OVERVIEW OF THE UNIT EQUIPMENT: Electronic control POWER CONTROL PC 20+ HOLDER ROLLER PLATE CRANKED INLET RULER ADJUSTABLE INLET RULER EXTENSION BY 300 MM SURCHARGE FOR PROGRAM ADJUSTMENT OF INLET RULER MOTORED HEIGHT ADJUSTMENT OF TOP PRESSURE SURCHARGE FOR PROGRAM ADJUSTMENT OF PRESSURE ZONE RELEASE AGENT INFORMATION WORKPIECE Fgeb Hlpsv Abfzj Rqjb AUTOMATIC EDGE FEED QUICKMELT – GLUING PART GLUE CONTAINER STANDARD, REPLACEABLE PU GLUE JOINING MILLING UNIT 2 X 2.2 KW 200 HZ FG 3500 JOINING MILLING CUTTER SET 48 MM DIA (FOR VKNR 4722/4730) AUTOMATION PACKAGE II FOR 2-MILLING MACHINE consisting of: 3175 – PNEUMATIC ADJUSTMENT OF TRIMMING BEVEL/STRAIGHT 5762 – PNEUMATIC ADJUSTMENT OF DRAWING BLADE 4189 – PNEUMATIC ADJUSTMENT OF MILLING UNIT 4199 – PNEUMATIC 2-POINT ADJUSTMENT. VERTICAL. TACTILE TRIMMING UNIT CHAMFER/STRAIGHT 2 X 0.35 KW HL 6110 PRE-MILLING UNIT 2 X 0.55 KW 0 DEGREES VF 6210 MILLING UNIT 2 X 0.55 KW SYNCHRONOUS BF 6245 ADDITIONAL COST PROGRAM ADJUSTMENT TO EDGE THICKNESS MULTIPLE ROLLER PROBE FLUSH MILLING MOTOR CHANGING DEVICE 2 MILLING MOTORS BF6240/6245 EXCHANGE COMBINATION MILLING SET STRAIGHT/CHAMFER 45 DEGREES FORM MILLING UNIT TOP+BOTTOM 2 X 0.35 KW FF 6220 2 motors each 0.35 kW, 200 Hz, 12000 1/min. DRAWING BLADE WITH QUICK CHANGE HEADS ZK 6510 ADDITIONAL DRAWING BLADE POINTED WORKPIECES SURFACE DRAWING BLADE GLUE JOINT ZF 6600 CLEANING AGENT INFORMATION WORKPIECE BUFFING UNIT 2 MOTORS FP 6810

Condition: used, Year of construction: 2023, total length: 5,300 mm, total height: 1,700 mm, total width: 1,300 mm, Weight: 1.550 kg Price: On request - Year: 2023 - Documentation available: No - CE mark available: Yes - Serial number: 1000062396 - Voltage [V]: 400 - Transport dimensions: 5300mm x 1300mm x 1700mm (l x w x h) - Transport weight [kg]: 1550kg - Transport packages [pcs.]: 1 Fgob Hjwbzhrjlp Rqsb Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Glenn Smeets

Condition: like new (used), Year of construction: 2010, machine/vehicle number: 0-261-20-4583, Edge banding machine BRANDT , Type O KDN 200 Ambition 1200, used, Year of manufacture 2010 Air pressure 6 bar The power supply voltage 400V – 3 ph - 50 Hz Total power 4 kW Work piece thickness from 0, 3, 4 to -8,50 mm Extraction diameter 3 x 60 working height 950 mm Feed speed/ Sealing side speed: 10m/min Coil cut off max: 0,4 mm -3,0x45 mm noise emission db(A) 84 to 87 Transport/overall dimensions L3.450xW1300xH2180mm Net weight 1200 kg Gluing, End cutting, Top & Bottom trimming, Scraping Price Euro 5400 Euro + VAT, negotiable, FCA: Oradea/Romania Feb Hlpeh Ak D Uj Rqegb Irrtum, Anderungen und Zwischenverkauf vorbehalten / Subject to errors, changes and prior sale / Ne rezervăm dreptul la greșeli, modificări și vânzare prealabila. We speak English. /Wir sprechen Deutsch./ Beszélünk magyarul. /Nous parlons français/Vorbim romana

Condition: excellent (used), Year of construction: 2012, Stefani Evolution C double-sided edgebanding machine Fjb Heu U N Agjlp Rqsgb Year of production: 2012 Technical condition: very good The Stefani Evolution C is designed for precision veneering of straight and profiled edges of furniture panels made of various materials, such as particleboard, MDF or plywood. Thanks to its advanced features and high quality workmanship, the machine provides excellent results in the production of office furniture, kitchen furniture, bathroom furniture and other home furnishings. Working width max: 3200 mm Working width min: 225mm PC control Stefani Winedge plus software v06.14.000 Longitudinal machining Transverse machining

Condition: new, Year of construction: 2024, ON STOCK!!! Pre-milling unit End Trim saw Top and Bottom Trimming unit Corner Rounding Unit Surface Scraper Touch Screen Controller Max. edge thickness: 3mm Min./max. workpiece thickness: 8–50mm Min. workpiece length: approx. 160mm Feed speed: 10 m/min. Ready to operate: approx. 3.5min. Power consumption: ∅ approx. 7.4kW Electrical connection: 400V/3Ph/50Hz Table height: approx. 900mm Machine dimensions: approx. 4,050x1,300x1,400mm (LxWxH) Weight: approx. 820kg Exhaust connection: ∅ 1x140mm Edge Banding Machine with PLC Premilling (DIA-tools incl.) up to max. 2 mm milling depth Corner rounding unit Radiusmilling R=2 mm Radius edge milling R=2 mm Fgeb Hlp Reglfwtjqob radius profile scraper

Condition: used, machine/vehicle number: 007718, Type of edging: Thin edge, Thick edge, Solid wood Fjb Hlovu Ihaep Rqogb Gluing System: EVA Hotmelt Premilling Unit: yes Corner Rounding Unit: yes Max feed speed: 11 m/min Maximum panel thickness: 60 mm Operating Units: 6 nr

Condition: used, Felder MG 560 Edge thickness 0.4 - 5 mm Control panel with LCD display and keypad Pre-trimming unit for joining before the gluing section Automatic edge magazine for roll materials - 3 mm Strip edge banding with individual feed Teflon-coated glue pot for EVA + PUR hot melt adhesive granules Short heat-up time Workpiece height 8 - 60 mm Finely adjustable glue roller Gun shear up to 64 mm material height for pre-trimming roll materials Printing unit Trimming unit for roll and strip materials, 45° working angle and 0°/20° bevel trimming Flush radius and bevel trimming Radius scraper Surface scraper Fob Hlsvy T Nysp Rqsgb Year of manufacture 2009 Machine is FUNCTIONALLY TESTED and in VERY GOOD CONDITION Ex works

Condition: used, Year of construction: 2011, total length: 4,000 mm, total height: 1,600 mm, total width: 970 mm, Weight: 1.300 kg Price: On request - Year: 2011 Fgob Hlpswbzfdj Rqeb - Documentation available: No - CE mark available: Yes - Serial number: AH/115214 - Voltage [V]: 400 - Transport dimensions: 4000mm x 975mm x 1600mm (l x w x h) - Transport weight [kg]: 1300kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Peter Stroomberg

Condition: excellent (used), Double side - Independent Machine (or 1st and/or 2nd in a line) Edges (band in rolls) thickness (Min/Max) mm 0,3 / 3 Panels thickness (min/max) mm 8 / 40 Working width (min/max) mm 225 / 2500 Numerical Control PC 22 /Software WoodCommander Adjustable feeding speed (m/min) 15 - 40 Safety and sound-proof enclosures/cabins Distance (center-axes) of the Disappearing Dogs (mm) 1000 SIZING PART (for each side): Anti-chipping Milling Unit (1 x Kw 4,5) Hogging Units KD 11 (2 x Kw 6,6) Milling Unit (vertical Joint Trimmers) UF 20/S2 (2 x Kw 4) EDGE-BANDING PART (for each side): Glueing Unit "ZERO JOINT" SCHUGOMA Kantenking (Option: EVA glue/ PU glue) Edge coils support (No 2 reels) Band Pressure zone (adjustable by N.C.) Type A Snipping (end-cutting) HL 84 (2 x kW 0,22), speed 25 m/min Fgsb Houhv R Dslp Rqeb Rough Trimming unit BF10 (2 x kW 0,55) Multi Function Unit (Profile contour Trimming unit) FK11 (2 x kW 0,4) Profile edge scraping unit (Multi-profile, adjustable by N.C.) MN 21 Finish processing unit (Glue scraper + Buffing unit) FA 11. Spraying Unit (for polishing liquid) No. 2 Milling grooving unit SF20 (2 x kW 6,6) Motorised panel infeed roller conveyor, with panel identification system "HOMAG" Mod. POWER TBL 100/20/25

Condition: new, Year of construction: 2025, The Hebrock F 5 If you want maximum performance, the Hebrock F 5 is the solution for edgebanding in demanding craft operations. The F 5 guarantees edgebanding in all steps, as it is equipped with all the components you need to meet your requirements: Joint trimmer, cross-cut saw, trimming unit, radius scraper, corner trimmer, surface scraper, fettling station. For even more flexibility on the way to the perfect finish, the F 5 can be optionally equipped with a practical multi-radius scraper. max. edge thickness: 3 mm Max. workpiece thickness: 50 mm Ready for operation in 3.5 min Equipment: Hebrock F5 Next - 10 m/min Fgob Hlpslht Hws Rqjb Edge banding machine F5 Next With PLC control (incl. touchscreen) and with hot-melt glue application to the workpiece for edgebanding material up to 3 mm; jointing cutter (incl. slide tool) up to 2 mm cutter depth, maintenance-free glue tray with change tray pre-equipment incl. glue discharge device, HF cross-cut saw station (approx. 12000 rpm), HF trimming station (approx. 12000 rpm) with separate pneumatic routing adjustment and exchangeable panel router (combination version), corner rounding router, radius scraper, surface scraper (incl. pneumatic lift), cleaning station, robust chain drive, ball bearing mounted double roller top pressure, viewing window from the rear of the machine, extendable workpiece support, feed rate approx. 10 m/min. F5/08/4 Quick-change attachment for corner router F5/08/5 additional exchangeable motor corner router with tool assembly F5/09/4 Multi-radius scraper (R1/R2) F5/24/1 Spraying device for release agent F5/24/2 Spraying device for cleaning agent F5/25 Edge spraying device F5/27. nesting for router and radius scraper F5/30. Pneumatic 3-point adjustment (radius, chamfer, flush trimming) Location: From stock 54634 Bitburg - available in CW4 -

Condition: used, Year of construction: 2023, OAV Max 330 Edgebander. S/No. 23040002EB3N3 (2023). Country of Origin: Taiwan Fgob Hlswhnkyop Rqjb Please Note: This lot is located in Birmingham, UK. All/Any tooling is being offered as specifically described.

Condition: used, machine/vehicle number: 007526, Type of edging: Thin edge, Thick edge, Solid wood Gluing System: EVA Hotmelt Premilling Unit: yes Fgeb Hlp Revu Iflsqeb Corner Rounding Unit: yes Max feed speed: 18 m/min Maximum panel thickness: 60 mm Operating Units: 7 nr

Condition: used, Year of construction: 2013, Technical data Machine length: 6060 mm Machine width: 1555 mm Machine height: 2300 mm Weight: 2600 kg Total power input: 21 kW (30 A) Compressed air: 6 bar Air consumption: approx. 350 l/min Extraction: 2820 m³/h (at 28 m/s) Technical features and equipment General functions Fsbjv Szt Ds Hlp Rqsgb Workpiece thickness: 8–60 mm Max. feed speed: 18 m/min Double pressure from above for stability of the part Electronic thickness control Frequency converter for feed Automatic lubrication of the feed chain Automatic motor calibration Touch control system Emulsion spray at the inlet and outlet Edge preheating Pre-milling unit Tool diameter: 100 mm Tool height: 63 mm Diamond tool with replaceable knives Motorized removal adjustment Gluing unit Glue and hot air application Heated application roller Quick exchange of the entire unit Automatic position adjustment via motor 3 pressure rollers Edging speed: 14 m/min Cutting unit Twin-motor unit with automatic tilting Tilt up to 15° THK prismatic guide Radius milling unit 2 tools Automatic adjustment in two axes Automatic overlap adjustment Copying unit (2 motors) Automatic tool position change by servo motor Electromagnetic horizontal movement Vertical hydraulically damped movement

Condition: used, Year of construction: 2010, - Year: 2010 - Documentation available: No - CE mark available: Yes - Serial number: CA.09.037.10 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Fjb Hlpjwbzd Ts Rqjgb Peter Stroomberg

Condition: ready for operation (used), Year of construction: 1997, Functionality: fully functional, Machine still in operation functional from the carpentry shop location Fobevx N H Es Hlp Rqsgb fixed price

Condition: new, Year of construction: 2025, The Hebrock F 2 The 3.3 m long F 2 is not only inexpensive and space-saving. It also has the equipment you need to process perfect edges right from the start: diamond-tipped jointing cutters guarantee excellently prepared workpieces for edging. The equipment includes a jointing unit (up to a milling depth of 2 mm), the top-mounted fast heating glue container, cross-cut saw and combination router. Optionally, the F 2 can also be equipped with a surface scraper. max. edge thickness: 3 mm max. workpiece thickness: 50 mm Ready for operation in 3.5 min Equipment: Fgeb Hlsi Am U Dop Rqjb F2 - 10 m/min Edge banding machine F2 next With PLC control (incl. touch screen) and hot-melt adhesive indication to the workpiece for edgebanding material up to 3 mm; jointing cutter (incl. slide - tool) up to 2 mm milling depth, maintenance-free glue basin with exchangeable basin pre-equipment incl. adhesive discharge device, HF cross-cut saw station (approx. 12000 rpm), HF-milling station (approx. 12000 rpm) with separate pneumatic milling adjustment and interchangeable plate cutter (combi design), robust chain drive, ball bearing mounted double roller top pressure, viewing window from rear side of machine, extendable workpiece support, feed rate approx. 10 m/min. F2/10 undercarriage F2/30 pneumatic 3-point adjustment (radius- ,chamfer-, flush milling)

Condition: used, Year of construction: 2014, total length: 6,000 mm, total height: 1,800 mm, total width: 1,500 mm, Weight: 2.900 kg Price: On request - Year: 2014 - Documentation available: No - CE mark available: Yes - Serial number: 24769 Fgeb Hlp Rewbzdgsqsb - Transport dimensions: 6000mm x 1500mm x 1800mm (l x w x h) - Transport weight [kg]: 2900kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Peter Stroomberg

Condition: new, Year of construction: 2025, The Hebrock F 2 The 3.3 m long F 2 is not only inexpensive and space-saving. It also has the equipment you need to process perfect edges right from the start: diamond-tipped jointing cutters guarantee excellently prepared workpieces for edging. The equipment includes a jointing unit (up to a milling depth of 2 mm), the top-mounted fast heating glue container, cross-cut saw and combination router. Optionally, the F 2 can also be equipped with a surface scraper. max. edge thickness: 3 mm max. workpiece thickness: 50 mm Ready for operation in 3.5 min Equipment: F2 - 10 m/min Edge banding machine F2 next Febelht Hze Hlp Rqsgb With PLC control (incl. touch screen) and hot-melt adhesive indication to the workpiece for edgebanding material up to 3 mm; jointing cutter (incl. slide - tool) up to 2 mm milling depth, maintenance-free glue basin with exchangeable basin pre-equipment incl. adhesive discharge device, HF cross-cut saw station (approx. 12000 rpm), HF-milling station (approx. 12000 rpm) with separate pneumatic milling adjustment and interchangeable plate cutter (combi design), robust chain drive, ball bearing mounted double roller top pressure, viewing window from rear side of machine, extendable workpiece support, feed rate approx. 10 m/min. F2/10 undercarriage F2/30 pneumatic 3-point adjustment (radius- ,chamfer-, flush milling)

Condition: used, Year of construction: 2023, total length: 3,800 mm, total height: 1,700 mm, total width: 700 mm, Weight: 1.000 kg Price: On request - Year: 2023 - Documentation available: No - CE mark available: Yes - Serial number: 1000063006 - Voltage [V]: 400 Fgeb Hlp Rewbkn Isqsb - Power [kW]: 6.8 - Transport dimensions: 3800mm x 700mm x 1700mm (l x w x h) - Transport weight [kg]: 1000kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Glenn Smeets

Condition: new, Year of construction: 2025, Hebrock F 4 For complete processing of your panels For all those who don't want to do things by halves. With the F 4, we offer you a model with which you can produce fully processed edges on a machine length of just 4 m. The F 4 is not only space-saving, but also extremely attractive in terms of price-performance ratio. Max. Edge thickness 3 mm Min/Max. Workpiece thickness 8 - 50 mm Min. workpiece length approx. 160 mm Feed speed approx. 7 m/min. Ready for operation approx. 3.5 min. Max. Power consumption Ø approx. 7.4 kW Electrical connection 400 V - 3 Ph - 50 Hz Work table height approx. 900 mm Machine dimensions approx. 4050 x 1300 x 1400 mm (LxWxH) Weight approx. 820 kg Suction nozzle Ø 1 x 140 mm PLC control 10″ touchscreen Top-mounted rapid-heat adhesive container (maintenance-free) Support plate for edging material Feb Hlohqadcjp Rqjgb Automatic central lubrication (cross-cut saw, corner router) Visual display for workpiece sequence Extension arm (can be pulled out to the front) Interchangeable basin pre-equipment incl. adhesive changing device for PUR processing Surface scraper with dual tracing Pneumatic roller capping (scissor cut design, Hebrock system) Double roller top pressure (ball bearing) Transport chain with bolted special chain plates Jointing cutter Milling unit cross-cut saw Corner cutter Accessories: F4/09 Radius scraper (incl. pneumatic lift) F4/09/4 Multi radius scraper (R1/R2) F4/30 Pneumatic 3-point adjustment Location: From stock 54634 Bitburg - available at short notice -

Condition: excellent (used), Year of construction: 1999, Running direction of the panel : from operator to left max. glue thickness : 5 mm min. Workpiece thickness : 10 mm min. Workpiece width : 90 mm feed speed : 10 m/min Fob Hlporutcyj Rqsgb Heating time : 5 min Automatic roll magazine : Yes cross-cut shears up to : 0.2 - 3.0 mm autom. gluing : glue pot with granulate on top cross-cut saw : rigid 90 Combination trimming unit : Yes unit display : display type of control : manual Operation : Selector switch/push buttons Protective hood : Yes Chassis : yes Dimensions : 2800 x 1400 x 1400 mm Weight approx. : 550 kg Location : Comes to stock 54634 Bitburg - immediately available - subject to prior sale

Condition: new, Year of construction: 2025, The Hebrock K 36 Top equipment with motorized adjustment - Exhibition piece - New machine - - immediately available - This Hebrock endurance racer offers unimagined possibilities. Developed for the highest demands, the K 36 stands for absolute reliability and productivity in daily use. With the option of equipping the machine with a step cutter and a multi-radius scraper, Hebrock is setting new standards in the field of perfect edge processing of various edge thicknesses. max. edge thickness: 3 mm max. workpiece thickness: 60 mm Ready for operation in 6 min. Fsb Hloi Am Ukop Rqogb Max. Edge thickness 3 mm Min/Max. Workpiece thickness 8 - 60 mm Min. workpiece length approx. 140 mm Feed speed approx. 15 m/min. Ready for operation approx. 6 min. Max. Power consumption Ø approx. 7.4 kW Electrical connection 400 V - 3 Ph - 50 Hz Work table height approx. 900 mm Machine dimensions approx. 5250 x 1230 x 1430 mm (LxWxH) Weight 1750 kg Equipment: Hebrock K 36 - 15 m/min Edge banding machine K36 With PLC control (incl. 15'' touch screen), hot melt adhesive application to the workpiece workpiece for edgebanding material up to 3 mm; jointing cutter (incl. slide tool) up to 3 mm routing depth, maintenance-free, coated glue tray with HF double-motor cross-cut saw station (approx. 12000 rpm), HF trimming station (approx. 12000 rpm) with pneumatic trimming adjustment and interchangeable panel trimmer (combi version), corner rounding trimmer, radius scraper, surface scraper (incl. cleaning station, robust chain drive, ball-bearing mounted double roller top pressure, unit viewing window from the rear of the machine and operator side, signal lamp for workpiece sequence, extendable workpiece support, feed approx. 15 m. support, feed rate approx. 15 m/min, gluing up to 60 mm workpiece thickness 36/08/1 Quick-change equipment for corner router 36/08/2/1 additional exchangeable motor corner router R=1 36/09/1 Multi-radius scraper 36/24/1 Release agent spraying device 36/24/2 Cleaning agent spraying device 36/25 Protective spraying edge 36/27 Nesting (1x milling station + 1 x radius scraper) 36/30 Pneumatic 3-point adjustment 36/30/1 Multitool for HF milling station (R2/R1/bevel) 36/45 Axis package Motorized adjustment of panel, edge thickness and joint milling depth jointing depth adjustment Location: ex stock 54634 Bitburg - immediately available -

Condition: new, Year of construction: 2025, The Hebrock F 5 If you want maximum performance, the Hebrock F 5 is the solution for edgebanding in demanding craft operations. The F 5 guarantees edgebanding in all steps, as it is equipped with all the components you need to meet your requirements: Joint trimmer, cross-cut saw, trimming unit, radius scraper, corner trimmer, surface scraper, fettling station. For even more flexibility on the way to the perfect finish, the F 5 can be optionally equipped with a practical multi-radius scraper. max. edge thickness: 3 mm Max. workpiece thickness: 50 mm Ready for operation in 3.5 min Equipment: Hebrock F5 Next - 10 m/min Edge banding machine F5 Next With PLC control (incl. touchscreen) and with hot-melt glue application to the workpiece for edgebanding material up to 3 mm; jointing cutter (incl. slide tool) up to 2 mm cutter depth, maintenance-free glue tray with change tray pre-equipment incl. glue discharge device, HF cross-cut saw station (approx. 12000 rpm), HF trimming station (approx. 12000 rpm) with separate pneumatic routing adjustment and exchangeable panel router (combination version), corner rounding router, radius scraper, surface scraper (incl. pneumatic lift), cleaning station, robust chain drive, ball bearing mounted double roller top pressure, viewing window from the rear of the machine, extendable workpiece support, feed rate approx. 10 m/min. F5/08/4 Quick-change attachment for corner router F5/08/5 additional exchangeable motor corner router with tool assembly Fjb Hlpsi Anado Rqegb F5/09/4 Multi-radius scraper (R1/R2) F5/24/1 Spraying device for release agent F5/24/2 Spraying device for cleaning agent F5/25 Edge spraying device F5/27. nesting for router and radius scraper F5/30. Pneumatic 3-point adjustment (radius, chamfer, flush trimming) Location: ex stock 54634 Bitburg Available in calendar weeks: 4/2024