Condition: not inspected (used), Year of construction: 2005, functionality: unexamined, workpiece height (max.): 40 mm, edge thickness (max.): 3 mm, feed rate X-axis: 35 m/min, rotational speed (max.): 12,000 rpm, number of slots in tool magazine: 48, TECHNICAL DETAILS Panel height min.: 10 mm Ppedpfx Agjyqybuo Tep Panel height max.: 40 mm Edge thickness min.: 0.4 mm Edge thickness max.: 3 mm Feed speed max.: 35 m/min PROCESSING UNITS Pre-milling unit Automatic engagement 48 tool positions End trimming unit 2 motors Fine trimming unit 1 2 motors Motor power: 0.55 kW Speed: 12,000 rpm Fine trimming unit 2 2 motors Motor power: 0.55 kW Speed: 12,000 rpm Edge scraping unit Glue scraping unit Polishing unit 2 motors Spraying device MACHINE DETAILS Control system: PC 22 EQUIPMENT Pressure applied with rubber belt Panel guides with NC positioning Glue pot for EVA hot-melt adhesive Pre-melter for EVA hot-melt adhesive Laser system (Model: LaserTec) Roller set for edge pressing with 5 pressure rollers Units mounted on safety guards CE marking The machine is sold and delivered in its actual and legal condition (“as seen and approved”), based on photo documentation and technical/commercial descriptive documentation. The buyer has the right to inspect the goods prior to collection and assumes responsibility for installation, securing, and use of the machine at the destination. External reference: 5321

Condition: good (used), Year of construction: 1997, functionality: fully functional, - PVC Primus, 3 mm PVC cartridge system - Gluing, flush trimming, flush milling, chamfer milling, radius milling - Scraper blade, buffing unit - Dimensions: 4700 x 1400 x 1650 mm - Weight: 1300 kg - Working dimensions: Podpfxswv Uq Ae Ag Tjpp Length: 4500 mm Depth: 1020 mm Height: 1630 mm - Connection nozzle: 140 mm Ø - Workpiece width: min. 60 mm - Feed rate: 11 m/min - 6 bar - 400 Volt compressed air - Edge thickness: 8 mm for strip material, 2 mm for roll material - WITHOUT pre-milling unit - New pneumatic cylinder Shipping possible at additional cost

Condition: used, Year of construction: 1990, Used machine Pedpfx Asyncpvog Tspp Year of manufacture: 1990 Equipment and technical data: - Automatic edge feeding - Cartridge glue system - Pressure unit with 4 rollers - Cross-cut saw unit - Flush trimming unit - Combination trimming unit (flush/chamfer/radius) - Radius scraper - Buffing unit - Edgeband thickness: 0.3 - 20 mm - Maximum edgeband height: 66 mm - Minimum edgeband length: 200 mm - Feed speed: 8/16 or 12/24 m/min Availability: short notice Storage location: 63934 Röllbach

Condition: used, Year of construction: 2013, total height: 2,100 mm, total length: 9,000 mm, total width: 1,050 mm, Weight: 6.000 kg Price: On request - Details: - └ Description: Not working: Several loose sensors and the glue bin has been disassembled, machine has not yet been tested - Year: 2013 - Documentation available: No - CE certificate present: No - Serial number: - Number of units [pcs]: 9 - └ 1st unit type: - - Tools available: Yes - └ 2nd unit type: - - Type/Brand: Nordson - └ 3rd unit type: - - Tools available: Yes - └ 4th unit type: - - Tools available: No - └ 9th unit type: - - Tools available: Yes - Voltage [V]: 400 - Current consumption [A]: 69 - Fuse [A]: 80 - Transport dimensions: 9000mm x 1050mm x 2100mm (l x w x h) - Transport weight [kg]: 6000kg - Transport packages [pcs.]: 4 Financial information Ppjdoyrp Uajpfx Ag Tep VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: used, Year of construction: 2017, total height: 2,100 mm, total length: 6,700 mm, total width: 1,050 mm, Weight: 3.500 kg Price: On request Ppsdpfeyrpvwox Ag Tep - Details: - └ Description: Includes Nordson unit built in 2017 - Year: 2017 - Documentation available: No - CE marking present: Yes - CE certificate present: No - Serial number: - Number of units [pcs]: 6 - └ 1st unit type: - - Type/Brand: Nordson - - Tools available: Yes - └ 3rd unit type: - - Tools available: Yes - Voltage [V]: 400 - Current consumption [A]: 41 - Fuse [A]: 50 - Transport dimensions: 6700mm x 1050mm x 2100mm (l x w x h) - Transport weight [kg]: 3500kg - Transport packages [pcs.]: 5 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: good (used), Year of construction: 2005, Gluing unit Motorized height adjustment Homatic NC 21 control unit Frequency converter A20 hot melt adhesive unit for roll material up to 3 mm and strip material up to 20 mm edge thickness End trimming unit (two motors) Feed control LCD flat panel display Feed rate 18.5 m / min ? Feed rate steplessly adjustable 8–24 m/min or 12–24 m/min Minimum working width 55 mm at workpiece thickness 22 mm / 100 mm at workpiece thickness 60 mm depending on workpiece length Workpiece projection 30 mm Workpiece thickness 12–60 mm Workpiece thickness without contour milling and finishing unit min. 8 mm Jointing/milling unit Workpiece preheating A 20 gluing unit / A 34 hot melt adhesive unit Magazine for solid wood edging, strip material, and roll material Roll cutting device Pressure zone KL end trimming unit Release agent spraying device top/bottom Melting unit with granulate hopper instead of glue pot QA glue pot front section, quick-change (for color changes) Pre-milling unit Contour milling unit with interchangeable heads Ppjdpfx Agjyvy D Ij Tjp Universal milling unit Automatic multi-trimming unit, complete Finishing unit The illustrated return unit is not included in the scope of delivery. The data were taken from a data sheet and are therefore supplied without guarantee. Exact configuration on request.

Condition: used, Set for edgebanding contoured or straight edges, comprising: KTD 72 edgebander with glue pot, F 13 trimming unit, and FP 12 end rounding unit. Podpfxoyxyw Ho Ag Tepp

Condition: excellent (used), Catalogue number 7843 TECHNICAL DATA - Table dimensions: 2050x350mm - Table dimensions with support: 2050x940mm - Min. workpiece length: 120mm - Min. workpiece width: 90mm - Workpiece thickness range: 10-45mm - Edge width range: 12-48mm - Edge thickness range: 0.4-3mm - Feed speed: 6.4m/min - Power consumption: 2.3kW Ppjdpfx Asx A Dt Djg Tsp - Required air pressure: 0.7 Mpa - Spindle speed: 10,000 rpm - Extraction connector: 2x100mm - Heating power: 1250W - Dimensions (L/W/H): 2400x1300x1130mm - Weight: 360kg ADVANTAGES – Unpainted – With polisher – Used machine, in very good condition Net price: 12,000 PLN Net price: 2,860 EUR Net price calculated at an exchange rate of 4.2 PLN/EUR (In case of significant exchange rate fluctuations, the price may change)

Condition: good (used), Year of construction: 1999, functionality: fully functional, Pacific P V 12 - F, year 1999 Power: 12.5 kW Pjdpfow Ni Nrjx Ag Tepp Edge thickness: 0.2–12 mm Feed: 12 m/min Glue application roller, synchronous and counter-rotating Automatic infeed fence Jointing/edge trimming End trimming up to 3 mm Flush milling at 15°, 30°, 45° Radius milling R 2 – R 5 Flush sawing Corner rounding Radius scraper blade Schwabbl cleaning unit Extendable roller support Compressed air: 6 bar Dimensions: 5400 x 1000 x 1400 mm Weight: 2300 kg

Condition: used, Year of construction: 2011, Type KDF 220 C Year of manufacture: 2011 Units operated from the display Gluing unit Cross-cut saw unit Flush milling unit Corner copying unit Radius scraper Surface scraper Edge thickness: 0.4 - 6 mm Workpiece thickness: 8-50 mm Feed speed: 10 m/min Total power: 9.5 kW Length: 4150 mm Weight: 1150 kg Ppjdpfx Agoxc N Hvj Top €19,990 including VAT, shown separately on the invoice

Condition: new, Year of construction: 2025, New machine Year of manufacture: 2025 Compact and flexible in the smallest of spaces. Workpieces receive their finish within a length of just 2.13 m. Equipped with a 1.1 kW high-frequency motor joining unit and diamond-tipped spiral joining cutter, Teflon-coated glue unit, pre-end trimming unit, and HF multifunction milling unit. Two free slots for finishing units, such as a surface scraper and polishing unit. Simple operation via 3.5'' color touchscreen. Technical data Machine length: 2,122 mm Workpiece thickness: 10–45 mm Minimum workpiece width: approx. 120 mm Edge thickness: 0.4 – 2.0 mm Edge height max.: workpiece height + 4 mm (2+2) Electrical connection: 400 V Total connected load: 3.6 kW Ppjdjynu A Uepfx Ag Tep Feed speed: 6.5 m/min Pneumatic connection: 6 bar Net weight: approx. 490 kg Options: Surface scraper unit Diamond tools, height = 45 mm Location: Flörsheim Availability: short-term

Condition: excellent (used), Year of construction: 2001, machine/vehicle number: 0-200-24-6287, functionality: fully functional, input voltage: 400 V, input current: 56 A, edge thickness (max.): 20 mm, Equipment: CE marking, Used single-sided HOMAG edge-banding machine for straight edges – KL 78/A20/S2 For pre-milling (jointing trimming), gluing and post-processing of various kinds of edging materials. Fixed stop on the left side. Year of Manufacture: 2001 SPEZIFICATION & EQUIPMENT: Basic machine with 80 mm wide conveyor chain with rubber-coated chain pads, - workpiece thickness max. 60 mm - top pressure with compound V-belt, motorized height adjustment (to workpiece thickness) - panel support with roller guide, extractable approx. 700 mm - clamping of glue application unit before rear end of workpiece, for even glue application - glue roller drive in case of feed stop - hand switch /remote control for setup – mode - adjustable infeed fence with NC-axis (CAN-bus) - Jointing trimming 2 motors (clock-wise, counter clock-wise), 2x4kW, jumping function GLUING SECTION A20, consisting of: - QA34 glue application unit, on request with PTFE-coating (Teflon) - Pre-melter for EVA glues - Edge magazine, edge thickness min. 0,4 mm to max. 20 mm Edge width (height) max 65 mm - Pressure zone with automatic horizontal adjustment (NC CAN-axis) to edge thickness, 1 driven & 6 non-driven pressure rollers. POST-PROCESSING SECTION: Pjdpfxjyv Da Ho Ag Tepp - Snipping (end-trimming) unit HL81, 2 motors, with straight/chamfer cutting function motorised fine-positioning of snipping stop - Pre-milling (rough trimming) 1,5 kW, top/bottom - Corner rounding FK13, 2 motors (top/bottom) with automatic 8-fold tool changer and several exchangeable trimming heads - Profile (radius-) scraping MN21, with NC-axis positioning - Flat scraping (glue joint) FA10, top/bottom, (version with 3 tracer rollers) - Straight belt sanding unit KS10 - Buffing unit top/bottom ELECTRONIC CONTROL: - HOMATIC NC21 OPERATING SYSTEM

Condition: used, Felder G680 edge bander, pre-milling cutters, glue application by roller, pneumatic pre-cut guillotine, pressure rollers, finish-trimming saws, top-bottom milling unit R1 – R2, corner rounding unit, profile scraper, flat scraper, polisher. Edge thickness 0.4–3 mm, max panel height 50 mm, total power requirement 7.22 kW, machine length 405 cm. The corner rounding unit requires inspection as it is not functioning properly. Ppedpfxjyufawe Ag Top

Condition: excellent (used), Year of construction: 2018, functionality: fully functional, Smart Touch Numerical Control with Sintra HD Software Panel height mm 10 – 60 Solid mm 22 Pvc/Abs mm 3 Feed speed up to mt/min 25 Working height electronically adjustable by N.C. Motorized and electronically adjustable panel support guide by N.C. Anti-adhesive group Rectifying group with 2 motors electronically adjustable by N.C. Reel holder plate with n° 1 position Gluing group for EVA hot melt glue with glue pot End trimming group with 2 motors with dynamic suction system that follows the blades in each of its movements. Staggered trimming/cornering unit with 2 motors electronically adjustable by C.N Anti-stick unit Rounding unit with 2 multifunction motors (cornering unit + rounding unit) Ppedpfx Agowlbxle Tjp Electronic edge scraping unit electronically adjustable by C.N Glue scraping unit Brush unit “SP-501” Automatic piece return system with Winner 4A bridge unloading

Condition: excellent (used), Year of construction: 2010, functionality: fully functional, Automatic edge banding machine for pre-glued edges Pedpfxjwfw A Hj Ag Topp

Condition: new, Edgebander Casadei Industry E350PM PRE-MILLING UNITS glue application pneumatic pre-cut guillotine pressure rollers front-rear trimming top-bottom milling unit R1 – R2 flat scraper polishing unit machine length 230cm, with table 280cm feed speed 7m/min max edge thickness 2mm max working height 45mm Podsyt H Nqopfx Ag Tjpp Brand new machine, European manufacture. Can be tested prior to purchase, available immediately.

Condition: excellent (used), Robland KM 550 Edge Bander Glue application with roller Pneumatic pre-cut guillotine Pressure rollers Final trimming saws Top and bottom milling unit R1 – R2 Ppsdpfx Agjyt Hu Ho Top Flat scraper Machine length with table: 210 cm Feed speed: 5.5 m/min Max edge thickness: 2 mm Max panel thickness: 40 mm Weight: approx. 450 kg Machine in very good condition, operates flawlessly. Inspection and test possible before purchase.

Condition: used, Year of construction: 1989, Used machine Year of manufacture: 1989 Condition: Function tested Equipment and technical data: Max. edge thickness: 20 mm Max. edge height: 51 mm Max. thickness of coil material: 3 mm Min. workpiece length: 140 mm Min. workpiece width: 60 mm Glue system: 1906 cartridge Pressure unit Milling unit 1920 for flush milling up to 20 mm and chamfer milling Required space (LxWxH): 3150x1800x1375 mm Weight approx.: 800 kg Location: Flörsheim Availability: Short-term Ppodow I U E Aspfx Ag Tsp

Condition: used, Year of construction: 2009, Used machine Year of manufacture: 2009 Single-sided automatic edge banding machine with CNC control, 10" touch screen Industrial conveyor chain 1 1/4" Joint milling unit FI-502 Glue application unit VC-710 End trimming unit IN-801 Top and bottom flush trimming unit RS-100 2 motorized multifunction profiling units - contour milling unit CR-202 (FAST system with 4 standard positions) Scraper unit RBK-503, NC 2 positions Flat scraper RCC-701 Workpiece thickness: 10-65 mm Max. workpiece height with contour milling unit (depending on profiles): 35-65 mm Edge thickness from roll: 0.4-3 mm Edge thickness from strip material: 0.4-22 mm (depending on unit) Minimum workpiece length: 140 mm Minimum workpiece width (with length 140 mm): 85 mm Minimum workpiece width (with length 250 mm): 50 mm Feed speeds: 10-14-18-20 Central extraction connection: 200 mm Extraction connection, edge banding: 80 mm Extraction connection, joint milling: 120 mm Glue pot capacity: approx. 3 kg Heat-up time at half fill: approx. 10 min Pedpfov R Nk Uox Ag Topp Length: 6000 mm Width: 1780 mm Height: 1770 mm Machine is offered without the workpiece return unit shown in the pictures Availability: short-term Location: Flörsheim

Condition: used, Year of construction: 2000, functionality: fully functional, NEW PRICE! Manufacturer: HOMAG Model: KFL 10/22/QE/CF Type: Double-side Sizing & Edge Banding machine Year: 2000 Status: Connected, test possible. Location Lithuania Basic machine Workpiece thickness 12...60 mm Workpiece width 70... mm Workpiece overhang to transport chain 40 mm Feed 10...40 m/min Power consumption Main drive 3...75 kW Height adjustment 0,2 kW Machine main drive Feed 6...30 m/min Ppodpfx Agouggpze Tjp Power draw 2,2...6,9 kW Gluing unit Edging type: Straight and softforming edges Edging material height 16...65 mm Workpiece feed max. 60 m/min Contour, trimming unit CF/CS 10/11/12 Discharge valve HMA 1 Melting unit HMG 12-1x1-M-HO Gluing section for preformed parts Type of edge Straight edges drum profiles Edge material Belt from roll Snipping unit for profile parts WK 46 Saw blade (diameter 80 mm, cutting width 3.2 mm, drill hole 34 mm, number of teeth 20) Flush-trimming unit and scraping unit for performed parts Buffing unit for performed parts Specification, layout on request

Condition: used, Year of construction: 2011, used, in excellent condition, low operating hours Manufacturer: Lange Model: B85K Year of manufacture: 2011 Machine no.: 132 CE type-certified Edge thickness: 0.4 – 3.0 mm Max. workpiece height: 50 mm Min. workpiece width: 75 mm Min. workpiece length: 120 mm Feed rate: 7 m/min Cutting from the coil Cutting unit: 0.2 kW Flush milling - chamfer milling: 2x 0.27 kW Flat scraper Extraction connection D 120 mm Space requirement approx. 2200 x 1130 x 1300 mm Ppedsyu U Epjpfx Ag Tsp Weight approx. 600 kg Total connected load 2.5 kW Warehouse location: 97447 Gerolzhofen, loaded free on truck, unpacked Delivery in as-inspected condition, without warranty or guarantee.

Condition: new, Technical data:Rated voltage 230 VRated input 3050 WEdge height 10 - 65 mmSwiveling range 0 - 50 °Edge thickness 0.4 - 3.0 mmHeating time 30 sTemperature max. 520 degrees CelsiusFeed stepless 1 - 5.5 m/minDimension (L x W x H) 220 x 160 x 360 mmConnection compressed air 6 - 10 barInner radius min. 10 mmWeight 10.8 kg Ppsdpfjwi Nt Esx Ag Tep

Condition: used, machine/vehicle number: 006849, Type of edging: Thin edge, Thick edge, Solid wood Gluing System: EVA Hotmelt Premilling Unit: yes Corner Rounding Unit: yes Max feed speed: 25 m/min Maximum panel thickness: 60 mm Operating Units: 7 nr Psdpfxowd Itme Ag Topp

Condition: used, machine/vehicle number: 005064, Position 1: Single Edgebanders BIESSE-STREAM B1 7.0 Position 2: Panel Return Systems BIESSE-STREAM B1 7.0 Ppedpfxjybaxbs Ag Tsp

Condition: excellent (used), Year of construction: 2012, machine/vehicle number: AH/115881, functionality: fully functional, overall weight: 2,364 kg, Equipment: documentation/manual, Element thickness: 60 mm Ppjdpsytkczofx Ag Tsp Edge thickness: 8 mm Feed speed: 18 m/min Soundproof cabin: Yes Glue tank: Yes Touchscreen control (10 inches) Height adjusted manually from the control panel 4-axis milling machine, manually operated from the panel Cross cutting Two wrapping units, profile scraper