Used Exhaust systems (mobile) for sale (169)

Condition: good (used), Year of construction: 2013, functionality: fully functional, Europac filter system EP 704 DS Year of construction 2013 S/n 1340 2 filter bags diameter 660mm Suction capacity approx. 5100m3 /h Filter density 1 micron Motor power 7.5kW, three-phase current 400 V 50 Hz Noise level: 70-90 dB(A) Main outlet diameter 250mm Chip bags approx. 1.65m3 Mobile platform ( rollers ) Protection class IP 54 Dimensions: 2.0mm x 1.65m height 3060mm Isdpfotp Su Njx Aaboih Weight 300 kg Technical specifications subject to change

Condition: good (used), Year of construction: 2003, The painting unit with heat exchanger and blowing for drying was used in the production of stairs and carpentry elements Iedpfx Aaeuyy A Dsbjih Paint wall also with extraction in the floor with a total length of about 7 mb equipped with three extraction fans

Condition: as good as new (ex-display), Exhibition machine Technical data: Engine output 2 HP at 100% duty cycle, engine voltage 380 V, suction capacity 2500 m³/h, suction nozzle 125 mm, distributor to 2 x 100 mm, dimensions L x W x H = 100 x 70 x 220 cm, weight approx. 50 kg Symbolic photo Iisdpfovrvruox Aabjh Prices subject to change, errors, printing and typesetting errors reserved

Condition: excellent (used), Year of construction: 2022, functionality: fully functional, negative pressure: 2,630 Pa, volume flow: 8,000 m³/h, nominal flow rate: 6,950 m³/h, power: 11 kW (14.96 HP), H 3 "GS dust-tested" Iisdpfowty Uzjx Aabsh Extraction connection 350 mm Ø Pneumatic JET filter cleaning Extinguishing system with powder extinguisher With rotary air lock

Condition: used, Year of construction: 2022, machine/vehicle number: 515, Neue Ausstellungsmaschine!! Listenpreis 9.854€ netto Ausgelegt zur Entsorgung einzelner Staubquellen und geeignet zur Aufstellung im Arbeitsraum, jedoch nur außerhalb explosionsgefährdeter Bereiche. Die wesentlichen Konstruktionsmerkmale sind: - verzinkte Stahlblechkonstruktion - platzsparend durch kompakte Bauform - Auslieferung in betriebsfertigem Zustand Iiedpfx Aaowt Hadsbeh - ATEX - Druckstoßfestigkeit FSA geprüft - niedriger Energieverbrauch bei hoher Leistung durch reinluftseitig angeordneten Hochleistungsventilator mit Spezial-Laufrad - Energiesparmotor der Effizienzklasse IE2/Eff1 -2 großvolumige Sammelbehälter, mit Einlegesack - Sammelvolumen 400 l - hohe Betriebssicherheit und lange Standzeiten durch Filterschläuche BGIA-geprüft - motorische Abreinigungsvorrichtung, mit Automatiksteuerung und Laufzeitaddierung - Alpha-Steuerung mit Einschaltautomatik (Schiebersteuerung gegen Mehrpreis) - Anschlusskabel, 5 m Länge, mit Stecker - Ausführung gemäß DIN 8416 - Reststaubgehalt in der Abluft unter 0,1 mg/m3 - Prüfung GS-HO-14 GS - H3 bestanden Lieferumfang: - Filterschläuche, außen beaufschlagtDurchlassgrad < 0,5 % (BGIA) - Energiesparmotor der Effizienzklasse IE3 - 2 großvolumige fahrbare Sammelbehälter - Mitsubishi-Alpha-Steuerung mit Einschaltautomatik (6 I-Spulen anschließbar) und Laufzeitaddierung - Eingang für externes Abschaltsignal (Endschalter, o.ä.) - Automatische Vibrations-Abreinigung GS-Holzstaubgeprüft - H 3 Vacumobil VT 200 - ø 200 mm, 4.0 kW, 400 V, 50 Hz ----- Technische Daten: Saugstutzen-Anordnung: links Nenn-Volumenstrom : 2260 m3/h max. Volumenstrom : 3400 m3/h Druckdifferenz, bei - Nenn-Volumenstrom : 2900 Pa *) - max. Volumenstrom : 2100 Pa *) Filterfläche : 12,05 m2 Saugstutzen : 200 mm Stutzen-Höhe, ca. :1500 mm, mittig Motor - Ventilator : 4,00 kW, 3x400 V, 50 Hz, IE 3 Motor - Abrüttlung : 0,12 kW, 3x400 V, 50 Hz, II 3D Vorsicherung :20 A (bauseitig) Schalldruckpegel : 71,0 dB(A) Gewicht, ca. :425 kg Maße, L x B x H :2012 x 1012 x 1990 mm *) Durchschnittswerte Der an der Schnittstelle erzielte Unterdruck bei beaufschlagtem Filter ist abhängig vom Absauggut und vom Feinstaubanteil. ACHTUNG: 1. bei Anschaffung einer neuen Absauganlagen sind Automatik-Schieber Vorschrift! 2. nach Montage der Absauganlage ist eine Luftmessung erforderlich!

Condition: good (used), Year of construction: 2011, functionality: fully functional, filter area: 13.5 m², negative pressure: 2,450 Pa, total height: 2,125 mm, total width: 870 mm, total length: 2,045 mm, overall weight: 340 kg, nominal flow rate: 1,832 m³/h, input voltage: 400 V, power: 3 kW (4.08 HP), rotational speed (min.): 2,865 rpm, input frequency: 50 Hz, Schuko dust extractor/extractor Vacomat 180 X Pe good condition Iedpov Iam Ijfx Aabjih

Condition: like new (used), Year of construction: 2022, functionality: fully functional, machine/vehicle number: 210PM2219030008, type of input current: three-phase, filter area: 22 m², total height: 1,800 mm, total width: 830 mm, total length: 1,717 mm, overall weight: 290 kg, nominal flow rate: 2,262 m³/h, input voltage: 400 V, extraction nozzle diameter: 200 mm, noise level: 72 dB, power: 3 kW (4.08 HP), input frequency: 50 Hz, tank capacity: 2,165 l, Used system with slight damage/scratches on the machine housing. There is still some fine dust in the machine. Serial number: 210PM2219030008 Dust tested according to H3, residual dust content less than 0.1 mg/m³ Suitable for extracting and separating dry wood and plastic chips High extraction performance with little space requirement Maximum performance in this class Very quiet All models with collision protection Area of application Designed for commercial use For all woodworking machines with the appropriate extraction nozzle diameter High-quality, well-thought-out design Robust and compact housing made of galvanized sheet steel Extraction nozzle can be easily converted from left to right, making it flexible to use Large inspection openings Large-sized, mobile chip containers with clamps and chip collection bag Dust extractor already fully assembled when delivered, making it quick to use All models mobile For model RLA 210: Optimal chip distribution in the chip containers due to large Filter area Description of the filter Ultra compact with maximum filter area Filter material made of polyester fleece, aluminum-coated, thus with a long service life Filter tested and approved as standard in antistatic design according to category M-BIA The fan is connected downstream of the filter Iisdpjvu Dcyjfx Aabeh Unit of measurement: piece Packaging unit: 1 Metal fan wheel Inspection opening for cleaning the bypass filter Connection cable 5 m with 5-pin CEE plug and phase inverter Two fixed and two swivel castors with parking brake Pre-equipped for connection of machine detection for up to 8 machines and slide controls Machine detection via potential-free contact Pneumatic cleaning (compressed air connection via standard plug, working pressure 4 - 6 bar)

Condition: new, Description:Vacomat 140/160 XPe- The Vacomat 140/160 XPe mobile dust extractor is our smallest model and ideal for single machine extraction. Air volumes of up to 1,593 m³/h can be conveyed with this extraction system using the vacuum method,e.g. for dedusting sliding table saws, jointers or thicknessers.- In the standard version, extraction is started manually at the push of a button. On request, an automatic start of the fan can be installed when the connected processing machine is switched on,so that the extraction system is not forgotten or unnecessarily operated in idle mode.- The dust and chip mixture is discharged into a dust-tight chip collection container (240 l) with an inserted plastic bag. A vacuum channel holds the plastic bag securely in the collection container.- The Vacomat 140/160 XPe mobile dust extractor automatically monitors its extraction performance via a pressure load cell and ensures maximum operational filter cleaning system- In the Vacomat 140/160 XPe, an integrated control cabinet ensures that the filter bags are cleaned electro-mechanically via a vibrator motor.- The control system is activated by querying the woodworking machine using potential-free contacts. As soon as all connected machines are switched off, the motorized filter shaking starts automaticallyNo connection to compressed air and therefore no compressor is required for this regeneration mechanism. This results in a significant reduction in the noise level during cleaning.- An efficient pressure shock cleaning system (XPe-D) is available as an option, especially recommended for very high and particularly fine dust content (ATTENTION: overall height then 100 mm and length 280 mm).Cleaning via the compressed air tank takes place offline, after extraction UKOCONE FILTER- The Vacomat 140/160 XPe mobile dust extractor is equipped with patented SchukoCone® filter bags as standard.- The SchukoCone® filters are a successful combination of an externally loaded filter bag with an internally loaded cone. This innovative filter design offers approx. 60 % more filter surface area with a smaller surface area requirement.- SchukoCone® filter bags unfold their enormous potential particularly with fine dusts, where a large filter surface area and low filter surface load must be ensured.- By reducing the filter surface load, a longer service life of the filter is achieved. If the filter resistance is low, less fan power and therefore less electricity is EMBLY Iedpfsvwflnjx Aabeih

Condition: new, This high-quality extraction fan from Holzprofi is characterized by an extremely long service life and high functionality. The special blade allows for very high performance with low power requirements. This blade also ensures very quiet operation. Technical data: Extraction capacity 9300 m3/h static negative pressure 3400 PA Hose connection 315 mm Weight 117 kg Motor output (S1) 7.5 kW Iodpfx Aajvrvyfjbeih Dimensions 81x73x62

Condition: excellent (used), Year of construction: 1997, functionality: fully functional, Year of manufacture 1997 Volume flow 2950 m³/h 200 mm suction nozzle Motor 3.7 KW, 400 Volt Iedpev A Rv Aefx Aabjih Technically in very good condition

Condition: excellent (used), Year of construction: 2017, functionality: fully functional, Extraction unit with rotary valve rarely used. The unit was installed incorrectly – the rotary valve was never properly connected to a transport line or container and was therefore rarely used due to the inconvenience. However, if a rotary valve is needed, this unit is a very good solution. We are happy to assist with questions, planning, implementation, installation, and service. The unit will be fully tested and delivered to you in perfect condition. The integrated pre-separator protects the filter bags from direct impact and achieves a high pre-separation efficiency by expanding the airflow of the intake air. The resulting significantly reduced filter load significantly increases the service life and lifespan of the filter bags. The fan, located on the clean air side, is housed in a flow-optimized housing. The sophisticated design of the steel impeller with backward-curved blades achieves maximum efficiency. The motor is located in the return airflow and is covered with a sound-insulated hood. The PLC control system built into the unit's housing offers both manual start and automatic ON/OFF switching via a potential-free contact on a machine. The filter is automatically cleaned after each suction cycle. Iiedpfowhpcqjx Aabjh Technical specifications POWER UNIT 300 P-ZRS: - Intake nozzle 300 mm - Motor rating 7.5 kW; 3-phase; 400 V/50 Hz; IE 3 - Maximum flow rate 6000 m³/h - Nominal flow rate at the nozzle at 20/22 m/s: 5089 / 5595 m³/h - Negative pressure at the nozzle at 20/22 m/s: 2587 / 2212 Pa - Filter area 30 m² (90 x Ø 95 mm, 1150 mm long) - Filter cleaning: Compressed air cleaning - Filter material Cat. M, el, white, washable - Filter load 170 m³/m²/h - Maximum sound pressure level 71 dB(A) (free-field measurement according to DIN EN ISO 11201) - Residual dust content H3 /

Condition: new, Year of construction: 2025, AL-KO APU 300 P Clean Air Dust Extractor Technical Specifications 300-P Intake manifold: 300 mm Rated motor power: 7.5 kW / 3-phase Voltage: 400 V / 50 Hz Max. flow rate: 6,000 m³/h Isdsrrw Tbjpfx Aabsih Nominal flow rate: 5,089 m³/h Vacuum pressure: 2,280 Pa Filter area: 30 m² Chip collection volume: 3 x 165 L Dimensions (L / W / H) in mm: 2,963 x 994 x 2,346 Weight: 880 kg Delivery time upon request

Condition: used, Year of construction: 2008, without briquetting press Filter area 32 m² with funnel transition to container or connection to rotary valve used, top condition, little used Brand Schuko Type Vacomat 300 Year of manufacture 2008 Clean air device / negative pressure GS dust-tested BIA-tested CE type-tested Motor 7.5 kW Connection diameter 300 mm Iodpfjvxlqmex Aaboih Pressure pa. 3090 Air output 5800 m³/h Control Filter pressure monitor Extinguishing device powder extinguisher New price approx. 17,000.00 EUR Space requirement approx. 3600 x 1590 x 2550 mm / 4400 without funnel Storage location 97447 Gerolzhofen, free loading, unpacked Handed over in the current condition as viewed, without guarantee and warranty

Condition: as good as new (ex-display), Demonstration machine Technical data: Ijdpfx Aaovrvr Ieboih Engine output 3 HP at 100% duty cycle, voltage 400V, suction capacity 3900 m³/h, suction connection 150 mm, distributor 3 x 100 mm, dimensions L x W x H = 150 x 75x 220 cm, weight approx. 60 kg Prices subject to change, errors, printing and typesetting errors reserved

Condition: new, Exhibition machine Type A according to DIN EN 16770:2018 without fire extinguishing device, tested according to the test principles GS-HO-07 of the BGHM. The dust extractor is a mobile suction and filter device for commercial use for installation in the work area. The dust extractor is suitable for collecting, conveying and separating dry wood, paper or plastic chips and dust on various processing machines. Consists of a vacuum-resistant housing with suction nozzle and check valve, antistatic filter elements with jet pulse cleaning, high-performance radial fan on the clean gas side with three-phase motor of energy efficiency class IE3 as well as integrated exhaust air sound insulation and air outlet grille. Iiedpsvwfu Nefx Aabeh With 2 swivel and 2 fixed castors, 2 chip containers with filling bags and a circuit with 5 m connection cable and CEE device plug. The circuit is designed for automatic operation. The automatic start-up control for a maximum of 6 machines and the automatic cleaning of the filter with running time addition are included. For the automatic start-up, either the take-off coils or potential-free contacts of the machine can be used. 1K PVC single-layer paint in RAL 9006 (white aluminum). Delivered assembled and ready for use. For cleaning, compressed air prepared on site must be provided to the device (connection via plug nipple NW 7 / 6 bar). Technical data: Suction nozzle: Ø 250 mm Residual dust content:

Condition: as good as new (ex-display), Exhibition machine - Hans Schreiner extraction system FM350 - 400V - Roitham warehouse Technical data: Motor output 5 HP at 100% duty cycle, voltage 400 V, extraction capacity 4560 m³/h, chip volume 480 l, main connection 180 mm, incl. distributor on 4 x 100 mm, dimensions L x H x W = 2184 x 2355 x 582 mm, packaging L x W x H = 1180 x 860 x 710 mm, weight approx. 145 kg Isdpfxevrvr Ue Aabeih Prices subject to change, errors, printing and typesetting errors reserved

Condition: used, Year of construction: 1996, incl. switch cabinet for start-up slide control 24 Vused, good conditionmake AL-KOtype Mobil Jet 200year of construction 1996clean air unit / vacuumGS-dust testedmotor 3,0 kWconnection diameter 200 mmcompression 1560 capacity 2780 m³/hfilling barrels 2 piecesfilter cleaning ssure displaynew price approx. 11.300,00 €space requirement approx. 2000 mm x 1000 mm x 2200 mmweight approx. 500 kgstorage place 97447 Gerolzhofen, free loaded, unpackeddelivery in as-is condition as inspected,without guarantee and warranty Iijdevwfglspfx Aabjh

Condition: used, Extractor Holzprofi G6000, year of manufacture 2021, very good condition, 4 kW, 71 kg Ijdpfsvrvi Tsx Aabjih Prices subject to change, errors, printing and typesetting errors reserved

Condition: as good as new (ex-display), Technical data: Iodpfx Asvrvtfeaboih Suction capacity 5200 m3/h Static negative pressure 3100 PA Hose connection 250 mm Weight 71 kg Motor output power S1 4 kW