Germanplast Srl

Condition: excellent (used), Twin-Screw Extruder Werner & Pfleiderer / Coperion ZSK 83 For sale is a ZSK 83 twin-screw extruder (co-rotating) from Werner & Pfleiderer / Coperion. The machine is in very good condition and has been regularly maintained. Technical details: • Model: ZSK 83 • Screw system: Co-rotating twin-screw • Motor power: 46 kW Csdpjx Dkmgjfx Addork • Barrel: Water-cooled • Degassing zone: available • Dosing unit: included (as seen in the photos) • Spare screw elements: available • Control system / control cabinet: in good condition, fully functional General information: This line is ideally suited for compounding, masterbatch, recycling, polymer, and filler applications. The extruder has been overhauled as needed and technically inspected. Inspection and test run on site possible by arrangement. Worldwide transport possible. If interested, please get in touch—further photos, datasheets, and videos are available.

Year of construction: 2002, condition: excellent (used), functionality: fully functional, Twin-screw extruder Credpfx Adox Dip Tsdsk Ref. No.: DE27695 Manufacturer: Leistritz Type: ZSE 40 HP Year of manufacture: 2002 Screw diameter: 2 x Ø 40.0 mm L/D: 40D Drive: 70 kW Details: co-rotating, segmented screws and barrel, 1 x segment for side feeding Options: pelletizing, dosing, side feeder Does this offer not meet your requirements? Please visit our website Plama Engineering or send us your detailed inquiry, we have suitable solutions for almost every budget.

Year of construction: 2017, condition: excellent (used), Category: Twin-screw extruder Number: DE27686 Manufacturer: Berstorff Type: ZE 25 Year of manufacture: 2017 Cedpfox A Evasx Addork Capacity: 10 – 50 kg/h (depending on material) Screw diameter: 2 x Ø 25.1 mm L/D: 47:1 Motor: 14.5 kW Control: Siemens Details: Co-rotating, segmented screws and barrels, degassing, vacuum pump, 1x side feeder The laboratory extruder is in excellent condition and can be inspected at any time at our premises in Haan/Düsseldorf. Does this offer not meet your requirements? Please visit our website Plama Engineering or send us your detailed inquiry – we have suitable options for almost every budget in our portfolio.

Condition: excellent (used), Year of construction: 1983, operating hours: 87,618 h, functionality: fully functional, machine/vehicle number: DS 85610, overall weight: 4,000 kg, total length: 5,200 mm, total width: 1,700 mm, total height: 2,500 mm, power: 75 kW (101.97 HP), input voltage: 380 V, input frequency: 50 Hz, input current: 160 A, Original WEBER 8.8 extruder with extended barrel to model 8.22. Comes with new and original screws from Weber. HMI control panel, previously used in a cleanroom environment. Includes hopper. Machine is offered as is. Csdjx Apckspfx Adderk

Condition: used, Year of construction: 2003, The Macchi 3-Layers is a high-capacity blown film co-extrusion line intended for production of general-purpose films with high width and output demands.It processes LLDPE, LDPE, mLLDPE, MDPE, HDPE, and in upgrade configuration also PP.The system uses a 700 mm 3-layer die head and reaches an output capacity of up to 900 kg/hour, depending on formulation. EXTRUSION GROUP: • Extruders: 80 mm + 100 mm + 80 mm • Infrared heating • Hydraulic screen changers Detailed upgrade specification: • One extruder Plastex 100/30D (middle layer B) • Two extruders Plastex 80/30D (layers A and C) • Bimetallic barrels • Nitrided screws • Water-cooled grooved feeding sections • 5 heating zones with IR heaters and blowers • Motors: - 150 kW DC motor (100 mm extruder) - 100 kW DC motors (80 mm extruders) • AC motor application with digital control (IP55) for reduced energy consumption and harmonic distortion DIE HEAD: • Model TE505 • 700 mm die diameter, die gap 1.8 mm • 4+4 heating zones with ceramic heater bands (19 + 35 kW total) • Mounted on a die cart with integrated air distribution manifold • Insert range 600–800 mm • Equipped with IBC system COOLING SYSTEM: • Dual-lip carbon fibre Karat air ring (K-Design) • ASR4 Double Flux Cooling Ring, blower 15 kW • Jet-7 IBC cooling control system Crodex Akywjpfx Addjk - 15 kW introduction blower - 18 kW extraction blower - Bubble diameter sensor - Air balancing valves - Variable-speed inverters TAKE-OFF UNIT: • Take-off width: 3200 mm • Oscillating nips • Optional tower-mounted secondary nip with load-cell control WINDING SECTION: • Double automatic back-to-back winder • Automatic roll change • Maximum winding width: 3150 mm FILM SPECIFICATIONS: Film width range with 700 mm die: 2000–3100 mm Thickness: 15–200 μm Output example: 3000 mm width, 100 μm LDPE → 800 kg/h ±10% LINE SPECIFICATIONS: Installed power: 550 kW, 415 V, 3-phase + neutral Screw speeds: 80/30D extruders: 0–130 RPM 100/30D extruder: 0–120 RPM Cooling water consumption: 6 L/min Compressed air requirement: 6 bar ADVANCED CONTROL & MEASURING SYSTEMS: • Doteco gravimetric dosing system Grado • Thickness profile systems (EC Plus modules): - S2 Automatic Die Control - S3 Rotating Capacitive Thickness Scanner - S4 Track Scanner - Q1 Serial communication (extruder/gravimetric values) - Q11 Printer module - Q12 Online modem diagnostics - Q7 Power consumption monitoring • K-Design VARIOcool automatic thickness control • Kundig reversing ring and thickness measurement AUXILIARY EQUIPMENT • Tower • E+L web guiding system • Corona treater AFS or 2800 station • Calibrating basket with optional supporting basket • Bubble guide GSRC 3200 (6 levels, motorized, IBC-linked) • Micro-perforation system (FBF cold needle) • Air shafts (8 pcs)

Condition: used, Cincinnati 5FL12 Hydraulic Shear with Elgo Electric P8511 Control Panel DRO, Rear Haul Off Conveyor, Powered Back Gauge, 5/8" Capacity Mild Steel (16m), Bed Width 3800mm. S/No. 33K27 Location: These lots are located in Dudley, West Midlands, UK. Unfortunately, there are no loading facilities, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described. Crsdpfx Adox Agibjdsk

Year of construction: 2007, condition: ready for operation (used), functionality: fully functional, REIFENHÄUSER​ TWIN SCREWS EXTRUDER, for PP / PE / PET Direct Recycling Type: RZE 2-85-41: D, Corotating Unidirectional Machine No .: Year of construction 2007 With​ gear pump,​ dosing station​ with 5 components +​ working platform and​ 2 K-Tron, 2 screws feeder Application:​ for Recycling, Compound or Pinpe Production Screw speed: 280 U / p min 10 digital cylinder heaters with cooling Screws: segmental Screws Cylinder: Segment construction Heating power: 104 KW Drive Baumüller: 260 KW Throughput: approx. 900 kg / h Condition: very good Vacuum pump is not included​ Price EXW 35.000,00 Euro Best Regards P. Sachal Location: D-26345 Bockhorn / Grabstede Sachal Extrusionsmaschinen Tel. =WhatsApp P. Sachal Credpfxoxzr H Nj Addok Sachal Extrusionsmaschinen

Year of construction: 2006, condition: ready for operation (used), Additional Equipment Crodpfxsxzlutj Addok Machine includes an SA 500 extractor built in 2006 and a 6m long cooling section. This KUHNE KS45-24D compounding extruder was manufactured in 2006. Ideal for processing a variety of materials, it offers robust construction and reliable performance. Consider the opportunity to buy this KUHNE KS45-24D compounding extruder. Contact us for more information. Application Types Extrusion

Year of construction: 1989, condition: good (used), Extruder ZSK 58/32 D Year: 1989 Csdpfx Ajxzfdbeddsrk Stainless steel cooling tank Sheer dryer Sheer granulator

Condition: good (used), KMD 2-50KK Reduction Gearbox Flender Extruder Krauss Maffei Reduction gearbox for KMD 2-50KK. Used but functional. The part is original and shows signs of corrosion and contamination due to storage. Csdpfjxzd T Uex Addork Private sale, no guarantee or warranty. We also have some spare parts for Krauss Maffei extruders in stock (e.g. control cabinets, hydraulic units, gearboxes KMD 2-90, etc.) – please enquire. €8,500

Year of construction: 2020, condition: excellent (used), functionality: fully functional, Layers: 5 Web Width: 1,500 mm Film thickness range: 10–45 μm Output: - 15 μm: up to 745 kg/h - 17 μm: up to 845 kg/h - 23 μm: up to 905 kg/h Final film widths (per bobbin): - 3 x 500 mm - 6 x 250 mm - 3 x 400 mm - 2 x 750 mm Coextrusion Structure / Number of Layers: 5 layers Layer distribution: B / A / D / A / C Percentage: 10 / 35 / 10 / 35 / 10 % Raw materials: - LLDPE: 2.8–5.0 g/10min (190°C/2.16kg) - VLDPE: 2.8–5.0 g/10min (190°C/2.16kg) Extruder "A": 90/33 L/D, Maximum LLDPE output: 800 kg/h Extruder "B": 60/28 L/D, Maximum LLDPE output: 200 kg/h Extruder "C": 60/28 L/D, Maximum LLDPE output: 200 kg/h Extruder "D": 60/28 L/D, Maximum LLDPE output: 200 kg/h Flat die lip width: 2,050 mm Roll width: 2,100 mm Chill roll C1 diameter: 1,600 mm Maximum mechanical speed: 650 m/min MATERIAL FEEDING AND DOSING "A": - 1 main component material feed - 1 additional component material feed - 1 gravimetric batch dosing system (mounted directly on the extruder, 3 components) MATERIAL FEEDING AND DOSING "B, C, D": - 3 main component material feeds - 6 additional component material feeds - 3 gravimetric batch dosing systems (mounted directly on the extruder, 3 components each) Extruder "A": - SML Single-Screw Extruder SML-ES-90/33 - Tool unit: Manually operated screen changer SML-MF-man/90 Extruder "B, C, D": - 3 SML Single-Screw Extruders SML-ES-60/28 - 3 Tool units: Manually operated screen changers SML-MF-man/60 Cloeren 5-layer/3-up Stretch Film System consisting of: - 1 five-layer feedblock FG - 1 automatic flat die, 2,050 mm (for automatic die control) - 1 die splitting system for flat die body separation and cleaning - 1 vacuum box, 2,050 mm - 1 triple-chamber vacuum box SML-TC/2050mm Cooling and take-off unit: - 1 casting section SML-CS/2100/650 - 1 electrostatic edge pinning device - 1 thickness measuring unit (X-ray sensor for automatic dies, stretch wrap film) - 1 recovery system for feeding stretch wrap film with vertical scraptruder for SML 90 mm single-screw extruder - 1 antistatic pipe - 1 power supply unit for antistatic pipes Winding unit: - 1 Cast Film Turret Winder Series W4000 for stretch wrap films - Max. end film width: 3 x 500 mm Crjdpfxjxyuffe Addsk - Number of turrets: 1 - Number of winding shafts: 4 - Winding shaft diameter: 3" - Max. mechanical winding diameter (3" bobbins): 400 mm - Min. winding diameter: 82 mm - Winding tension: 15–100 N/m - Contact pressure: 50–500 N - Cycle time (3" core magazine): 20–25 s - High-speed Cast Film Turret Winder for stretch wrap film—compatible with 3" air shafts, contact winding mode - 1 automatic core and roll handling system W4000 4S1T (per turret) - 1 oscillating frame SML-OF/2100 Control and data logging: - 1 SML Automatic Control System SML-CS-2/SMILE/4 extruder - 1 SML Data Logging System: SMILE Process Analyzer - 1 E-container (20 ft) Chiller: Frigosystem Compressor unit: MSD V 30-37

Year of construction: 2016, condition: ready for operation (used), General Data Machine weight 1100 kg Measurements height 1960 mm Dimensions Machine Length 2120 mm Injection Unit Crodpfjxyl Svex Addek Screw diameter 45 mm This Krauss Maffei KME 45 XS single screw extruder was manufactured in 2016. It features a screw diameter of 45 mm and a length of 1350 mm, with a drive power of 23 kW and a maximum speed of 2486 rpm. The machine includes five heating/cooling zones and can handle a maximum air flow of 5 × 630 m³/h. If you are looking to get high quality extrusion capabilities consider the Krauss Maffei KME 45 XS machine we have for sale. Contact us for more information. Application Types Extrusion

Year of construction: 2010, operating hours: 29,000 h, condition: excellent (used), Category: Twin-screw extruder Number: DE27699 Manufacturer: Coperion - Werner & Pfleiderer Type: ZSK 50 MCC+ Year: 2010 Screw diameter: 2 x Ø 50.0 mm L/D: 48:1 Motor: 129 kW Details: Co-rotating, segmented screws and barrel, vacuum pump, temperature control unit, 2x side feeders, 1x side degassing The extruder is in very good condition and has only 29,000 operating hours. Options: 7-fold dosing system from Motan Colortronic, dryer (Motan LA 1200/4), IPS strand extraction, strand conveyor belt, water bath, granulator, vibrating screen. All options are available immediately at extra charge. Codpfx Adsxykcgoderk This offer does not meet your requirements? Please visit our website Plama or send us your detailed enquiry. We offer suitable equipment for almost every budget.

Year of construction: 1996, condition: ready for operation (used), functionality: fully functional, screw conveyor diameter: 25 mm, TECHNICAL DETAILS Screw diameter: 2 x 25.0 mm L/D: 40:1 MACHINE DETAILS Total power: 12.0 kW EQUIPMENT Platform 4-way dosing system from Brabender Scholz dosing control Easytouch (year of manufacture 2009) 1x side feeder Degassing Strand die Water bath by Collin Scheer granulator SGS 50-ET Credpsxx Uk Eofx Addok

Condition: good (used), Year of construction: 1999, operating hours: 17,620 h, Brand: Collin Lab & Pilot Solutions GmbH Extruder model: E 30 M Low Boy Screw type: Single screw Screw Ø: 30 mm L/D ratio: 25 mm Operating hours: 17,620 h Year of manufacture: 1999 Csdsxx Tnpjpfx Addork

Condition: excellent (used), We are offering an unused single-screw extruder from stock. The unit was operated exclusively for test purposes and is therefore in excellent, near-new condition. Ideal for laboratory, material development, small batch production, or custom extrusion applications. — Technical Data & Features • Screw diameter: 30 mm Crodoxxim Iopfx Addok • L/D ratio: 25:1 • Condition: unused / test runs only • Drive: 3 kW SEW motor with gearbox • Heating zones: 4 zones with temperature controllers • Control cabinet: included in scope of delivery • Currently not connected, but can be integrated without issue • Die: Strand die can be customized or newly manufactured upon request • Design: robust laboratory/pilot plant construction • Mobile: base plate with heavy-duty castors – easy to position — Special Features • Very compact design • Ideal for filament, profiles, laboratory tests and material trials • Barrel and screw in excellent condition (see photos) • Immediately available from stock

Year of construction: 1993, operating hours: 281 h, condition: used, functionality: unexamined, Extrudex single-screw extruder ED-N45-25D, year 1993, condition used (completely overhauled in 2014) Type: ED-N-45-25D Rated voltage: 3x400V 50Hz Control voltage: 230V 50Hz / 24VDC max. main fuse 200A Drive motor Year: 2004 Type: EFG EF132 M Optionally included: - Belt haul-off - Calibration table For further information, please inquire. Credsxw Tumopfx Addok Price on request.

Condition: excellent (used), Extruder for 3D Printing Filament Production – 25/25 L/D We offer a high-quality extruder for the production of 3D printing filament. The system is designed for continuous industrial operation and is characterized by its robust construction, precise temperature control, and excellent material homogenization. Ideal for manufacturers, material developers, and research institutes. Crodpfx Aoxwvqqoddsk Technical Equipment & Features • Extruder 25/25 L/D – efficiently designed screw geometry for uniform melt quality • High-performance melting zone – precise temperature regulation for consistent filament quality • Die for 3D filament extrusion – suitable for all standard filament diameters • Cooling bath – stable filament take-off and optimized cooling section • Haul-off unit – finely adjustable pulling speed for exact diameter stability • Winding and spooling device – automatic filament winding • Optimally suited for PLA, PETG, ABS, TPU, and many technical materials

Condition: ready for operation (used), Year of construction: 1995, operating hours: 39,000 h, functionality: fully functional, Equipment: documentation/manual, A used and functional profile line for rigid PVC-profiles, consisting of: Twin-screw extruder (parallel) Manufacturer: WEBER Type: DS 7.22 Year of manufacture: 1995 Crsdjxu U Trjpfx Addsk Machine no.: DS70-043 Operating hours: 39,000 hours Screw diameter: 70 mm Effective screw length: 22 x D Screw geometry: for rigid PVC profiles Torque: 4,500 Nm per screw Screw speed: max. 40 rpm, continuously adjustable Drive motor: DC low-voltage motor, thyristor-controlled Drive power: approx. 25 kW Cylinder heating/cooling zones: 5/3 (air cooling with fan) Adapter heating zone: 1 Tool heating zones: 5 Control: conventional control with digital temperature controllers Degassing: Busch rotary vane vacuum pump (1.5 kW) Output capacity, max.: 120-150 kg/h for hard PVC, depending on material Connected load: approx. 50 kW (without tool) Special accessories: Mass temperature sensor and mass pressure sensor Adapter between extruder connection and extrusion tool Used tool set for a window profile (widening), consisting of: - Extrusion tool ‘widening’, incl. heating bands - Dry calibration - Vacuum tank approx. 2 m long, with 8 slots for calibration discs - 16 calibration discs Vacuum calibration unit Manufacturer: Uniplast / Greiner Type: CAL VAK 4P Year of manufacture: 1992 Machine number: K9209590 Total length: 6500 mm Vacuum pumps: 4 x Speck vacuum pumps (4.3 kW each) Water circulation pumps: 2 x Calpeda (1.1 kW each) Caterpillar haul-off, incl. attached saw Manufacturer: Uniplast / Greiner Type: CAT PUL 2D Year of manufacture: 1992 Machine number: R 9204546 Haul-off: Effective contact length: 2000 mm Pad width: 250 mm Haul-off force, max.: approx. 25000 N Speed range: approx. max. 10 m/min. Profile saw: HM circular saw blade: Ø 450 mm Profile cross-section, max.: approx. 300 x 100 mm Tilting table Manufacturer: Ide Type: ME N 52/2 Year of manufacture: 1994 Length: 6000 mm Support width: 270 mm Note: The complet profile line was overhauled in 2020 and has only been in operation for 325 hours since then.

Year of construction: 2009, condition: excellent (used), max in operation for 4 years die 700 mm dosing 1+3 components Cedoxu N Iqepfx Addjrk NGR trimming recycling - including Futec optical flaw inspection system manufacturing year 2009 machine is designed for low-gel film production for the semiconductor industry - including Fuji dual turret automatic winder manufacturing year 2009

Condition: good (used), Manufacturer: Plastik-Maschinenbau GmbH (PM) Model: PM Wiska 30-25 D Serial No.: M0793 Made in: West Germany (Kelberg / Eifel) Type: Single-screw plastic extruder Documentation: Included (original German manual and correspondence from 1987) Condition: Used, but complete and fully functional Location: Ivanka pri Nitre, Slovakia Technical Details (approximate) Screw diameter: 30 mm L/D ratio: 25 D Main drive motor: Lenze GFOT 100-24 (440 V / 26 A / 2 kW / 3000 rpm) Power supply: 3 × 380–420 V / 50 Hz Codoxu E E Sjpfx Addjrk Control voltage: 220 V Cooling system: Air-cooled barrel with heating zones Control cabinet: Included, equipped with relays, circuit breakers, and analog meters Description Compact single-screw extruder for laboratory or small-scale production, manufactured by Plastik-Maschinenbau GmbH in West Germany. Designed for processing thermoplastics, material testing, or small extrusion lines (e.g., tubing, profiles, or coating applications). Supplied with the original electrical cabinet, pressure gauge, and documentation. Mechanically and electrically complete; ready for standard commissioning.

Condition: excellent (used), Year of construction: 2007, functionality: fully functional, screw diameter: 62 mm, Details: co-rotating, degassing, vacuum pump, segmented screws and cylinder, opportunity for side feeder Crjdoxu Dp Nopfx Addok

Condition: used, screw diameter: 35 mm, For sale: SJ35 Single Screw Plastic Extruder manufactured by Zhang Jia Gang Friend Machinery Co., Ltd. Csdpsxuczqjfx Adderk A compact and reliable extrusion unit suitable for small- to medium-scale production—ideal for laboratory testing or extrusion of plastic tubes, profiles, or filaments. The machine is fully functional, well maintained, and available for immediate inspection. Technical Specifications Model: SJ35 Manufacturer: Zhang Jia Gang Friend Machinery Co., Ltd. (China) Screw diameter: Ø35 mm L/D ratio: 35:28 Main motor power: 7.5 kW Center height: 1000 mm Gearbox: ZLYJ112 (ratio 16:1, 2017) Heating zones: multiple, each independently controlled Drive: ABB inverter control Hopper dryer and feeder included Electrical supply: 400 V / 3 phase / 50 Hz Condition: fully operational and tested Condition Very good technical and visual condition Equipped with digital temperature controllers and main motor speed control Comes with complete electrical cabinet with ABB inverter and wiring Regularly maintained, all components present Available for inspection and testing in Ivanka pri Nitre, Slovakia Price €5,000 (negotiable) Ex-works Ivanka pri Nitre, Slovakia Ideal for: - Plastic extrusion of small profiles, tubes, and filaments - Laboratory testing and material development - Educational or pilot-scale production facilities

Condition: new, Year of construction: 2025, operating hours: 1 h, functionality: fully functional, machine/vehicle number: 1/10/2025, control cabinet height: 1,000 mm, Extruder FI 25, 3 cylinder heating zones + 2 die head heating zones, versatile application with a nitrided plasticizing unit. - Nitrided plasticizing unit, 25 mm diameter - Barrier screw with mixing tip (for rigid PVC), - Screw output torque 236 Nm - maximum screw speed 152 rpm - Screw start interlock to prevent start-up under insufficient heating - Cylinder fitted with hopper zone cooling (liquid-cooled) - 3 cylinder temperature regulation zones - Extrusion output with die Ø8: 25 kg/h Crsdpfxsxtf Hgs Addjk - Heating and cooling system (band heaters, cooling fan) - Lenze gearmotor with 4 kW motor - feeding - Stepless adjustment via potentiometer on frequency inverter - Temperature regulation via Omron controllers with full control - Heating element current measurement - heater burnout detection - Heating tuning function PiD - type "J" thermocouples - Die head with 2 heating zones without cooling

Year of construction: 2023, condition: new, Coperion ZSK 27 MV Plus extrusion line Application: Pharma dental sticks Year: 2023, never used, still in original packaging Codpexr Hgxofx Addork