Used hydraulic presses double column / Four column presses for sale (311)

Condition: used, Manufacturer: EXNER Type: EX 20 Maximum pressing force: 20 t Table size: 480 x 350 mm Fedexbf Ndepfx Ah Depr Maximum tool height: 230 mm

Condition: like new (used), Year of construction: 2024, functionality: fully functional, pressing force: 40 t, table width: 1,000 mm, table length: 600 mm, 40T H-Frame Press with Ram Table • Press capacity: 6-40 T (adjustable) • Maximum installation height: 700 mm • Usable area, lower table: 1000 x 600 mm • Usable area, ram: 1000 x 600 mm • Frame type: H-frame • Guide column diameter: Ø 100 mm (4 pcs, at the corners) • Table height from floor: 800 mm • Overall dimensions approx. (W x D x H): 2,100 x 1,600 x 3,500 mm • Total weight approx.: 3,500 kg • T-slots and drill holes made to customer specification. HYDRAULIC CYLINDER: • Piston stroke: 0-500 mm (adjustable) • Cylinder diameter: Ø 140 mm (1 pc) • Piston rod diameter: Ø 80 mm (1 pc) • Max. operating pressure: 260 bar • Return speed: 90 mm/sec • Ram speed: 9 mm/sec • Idle speed: 80 mm/sec HYDRAULIC UNIT: • Hydraulic pump (brand: ASC): 67+8 L/min (1 pc) • Motor power: 4 kW (1 pc) • Pressure accuracy during pressing stroke: +/- 5 bar • Hydraulic unit is mounted at the rear upper section of the press. • Hydraulic manifold and valves by DUPLOMATIC. • Manometer for pressure display. • Air filter and oil filter brand: FILTREC. • Equipped with an electronic oil level switch. • Air cooling (cooler) is used for hydraulic cooling. • Pressure adjustable via pressure switch. • Control via sensor. • Safety cover (door) located at the rear of the press. • Safety light sensors and internal lighting included. ELECTRICAL CONNECTION: • Main supply: 400V AC • Control voltage: 24V DC Fodpfjxrby Hex Ah Dspr • Frequency: 50 Hz • Hydraulic unit main motor connection: 4 kW • Total power supply: Approx. 6 kW CONTROL CABINET EQUIPMENT: • Protection class: IP 54 • Reserve space: 30% • Cooling: Yes (air cooling) • Internal lighting: Yes • Mode selector switch: Yes (lockable) • Electrical equipment brands used: SIEMENS, ALLEN BRADLEY, SICK.

Condition: ready for operation (used), Year of construction: 2000, functionality: fully functional, machine/vehicle number: 65056, pressing force: 5,000 t, table width: 4,520 mm, table length: 2,150 mm, overall weight: 3,19,000 kg, stroke length: 900 mm, Equipment: safety light barrier, Pressure build-up time: 3.6 s Pressure relief time: 1.5 s 6-axis industrial robot, manuf. ABB, type IRB6640 M2004 Control cabinet array, 12-door, SN 6/5056 Operator panel, water-based hydraulic unit Fsdpfxexb Tplo Ah Dspr Tool change device Mesh safety enclosure with light curtains

Condition: good (used), pressure 250 t passage width 700 mm stroke 850 mm table surface area 2000 x 1000 mm Fpsdpfx Aexcblwoh Dsr mould height - Max./min. 355 / 1200 mm total power requirement 30 kW weight of the machine ca. 25 t dimensions of the machine ca. 4,2 x 2,1 x 5,5 m

Condition: excellent (used), Year of construction: 2015, functionality: fully functional, pressing force: 700 t, overall weight: 50,000 kg, stroke length: 1,500 mm, Equipment: documentation/manual, Press used for composites, until now it worked in Belgium. In July 2015 the press underwent a thorough modernization, the year of production of the device is 1990, however the modernization was very extensive. The press was used very little, it worked in a research institute. Due to the power cut, I could not check the mileage, but the device looks like new, there are no signs of wear of the working elements. The press is currently in Poland, 63-300 Pleszew, Poland. Pressure 700T. Dimensions of the upper foot 180x240. Foot stroke approx. 150cm. The press was used to develop the famous carbon space frame AUDI R8, it worked in a research and development institute near Brussels. Sometimes this device was also used for commercial production. The press looks practically like new. I have full modernization and technical documentation. The device was dismantled by me, in the sale price I add free assembly at the customer's, I will restore the device to the condition it was in before I dismantled the press. The buyer must provide a large forklift (approx. 44T), compressed air, and accommodation for 3 people for 14 days. I offer and pay for a team to assemble the device on site throughout Europe. Fodswtbc Tspfx Ah Djpr It is very likely that the device will have to be configured for operation at the new buyer's, this task can be performed for an additional fee by a company from the Netherlands, which carried out a thorough modernization of the device in 2015, the estimated cost of such an operation depends on the buyer's requirements. The transport costs will be very attractive, because I have a friendly company that has very attractive delivery terms for me. The weight of the entire device is approximately 50T.

Condition: new, Year of construction: 2025, functionality: fully functional, The P50MR motorized hydraulic press guarantees high performance and maximum execution precision thanks to the robust structure entirely cut by laser without welding in the points of greatest stress. They are equipped with a 400 [V] 50-60 [Hz] submersible motor control unit, a fast approach and return pump calibrated to 20 [bar] plus an adjustable pressure pump with handwheel to obtain the required power. Fpsdpfsfvhqgox Ah Djr They are also equipped with a pressure relief valve with mechanical block to prevent overpressure and the pressure gauge (standard) allows to calibrate with extreme precision the power delivered. Power Ton 50 Inside light shoulders mm 800 Approach speed mm/min 1800 Working speed mm/min 350 Rapid flow rate l/min 26 Flow rate in slow l/min 5 Cylinder stroke mm 300 Cylinder bore mm 135 Stem diameter mm 70 Shank diameter mm M30 Tank capacity 50 litres Max. pressure bar 350 Voltage V400 Frequency Hz 50-60 Engine power kW 3 Max. current consumption A 5.5 Weight kg 500 Dimensions 1550 x 800 x 1965 (h)

Condition: as good as new (ex-display), Year of construction: 2008, machine/vehicle number: LSP 100T, Productions-Hydraulic press with H-column 100t with guidance Manufacturer: Stenhoj Denmark Year of construction: 2008 Pressure force max. 1,000 kN / 318bar Press cylinder, stroke length: 400mm Press table with T-slot 1,500x900mm above 1,500x1,050mm below Stand passage 1,700mm Condition as good as new, the machine was only used for test runs and has been in stock since then. All statements without guarantee. Fodjg Rn Efepfx Ah Depr Without transport costs.

Condition: as good as new (ex-display), Year of construction: 2022, Press design double column press Thermally neutral 80 - 120 °C Number of operating sides 1 side Forces Pressing force max. 4000 kN Free ripping force max. 400 kN Fodpfx Aoph Uk Njh Dspr Pressure build-up time Closed die steel to steel Max. 4 sec. Dimensions 3,800 mm long and 4,475 mm wide Max. Opening width 800 mm Stroke 800 mm Table height above floor 1100 mm Height above floor (headroom) approx. 4300 mm Hall height min. 5500 mm parallel deviation at 20°C +/- 0,1 mm Deflection Determined at max. clamping force with 70% occupancy < = 0.2 mm/m Weight Total weight of press without operating materials and table plate approx. 28 t Press table Table size 1500x1500 mm Speeds Fast closing with 100 mm sec. Pressing speed 8 - 3 mm sec. Sound pressure Sound pressure level, measured at 1.5m height at the control panel according to DIN 45635-T16-KL3 max. 78 db(A) Hydraulics Number of pressing cylinders/driving cylinders 1 pc. Operating pressure max. 300 bar Pressing pressure build-up time 4 sec. Pressure accuracy during pressing stroke +/- 3 bar Main pump BOSCHREXROTH axial piston pump approx. 145 L/min Oil volume approx. HLP 46 MW 1000 liters Ambient temperature max. 40 °C Oil temperature max. 55 °C Flow temperature °C Auxiliary pump BOSCHREXROTH, gear pump 10 L/min Pressure stabilization for up to 300 sec. Electrical system Main supply 400 V AC Control voltage 24 V DC Frequency 50 Hz Connection hydraulics main motor 40 kW Sliding table press with 400 T capacity, Closing speed up to 100 mm/ ( adjustable via touch screen ) Opening speed up to 100 mm/sec ( adjustable via touch screen ) Starting press speed 10 mm/sec ( adjustable via touch screen ) table top size 1500x1500mm ram size approx. 1600x1500mm Oil temperature monitoring 55 degree warning, 60 degree shutdown Automatic lubrication ( adjustable via touch screen ) Free positioning of the ram ( adjustable via touch screen ) SICK/PILZ light barriers 14 mm, front, up to 1800 mm height Hydraulic and mechanical ram protection Circuit oil cooling ( adjustable via touch screen ) Ejector in table, 20 T press force, 350mm travel Ejector moves outwards with the table Table plate milled flat, with DIN 22 T grooves Pressure adjustment from 60 T to 400 T ( adjustable via touch screen ) Travel limitation either by pressure or position Set-up mode, single stroke and cycle sequence ( adjustable via touch screen ) Swiveling control panel on the cabinet Two-hand operation, with opening button, manual/single stroke/cycle switchover button Installation, commissioning, instruction against separate charge The control is supplied by SIEMENS. ( S 7 1200 ) Also the touch screen monitor with 9 inch. The remote maintenance unit SECOMEA -Ethernet is included in the delivery. The side of the press has two 1000 mm high and 800 mm wide windows with double doors. (sliding table press, hydraulic press, hydraulic press, double column press)

Condition: good (used), Year of construction: 1994, functionality: fully functional, total length: 2,700 mm, pressing force: 1,000 t, table width: 1,500 mm, distance table to ram: 1,750 mm, Used 1000ton hydraulic press for sale Fpedsucdgpepfx Ah Der 1000TON PRESS SIDE FRAME Max TYPE CAPACITY 1000ton PRESSURE 175kgf.cm2 STROKE 1000mm DAYLIGHT 1750mm BOLSTER AREA 2700mm x 1500mm PULL BACK CAPACITY 52.7ton DIE CUSHION CAPACITY 50ton DIE CUSHION STROKE 180mm MAIN MOTOR 415v 50hz 6p 110kw OIL TANK CAPACITY 1800L

Condition: ready for operation (used), Year of construction: 1991, operating hours: 20,242 h, functionality: fully functional, machine/vehicle number: 6538, pressing force: 163 t, overall weight: 25,000 kg, retraction force: 22 t, stroke length: 500 mm, actuation type: hydraulic, TECHNICAL DETAILS Ram Pressing force: 1,600 kN Return force: 220 kN Stroke: 500 mm Drive power: 37 kW Drawing Device Drawing force: 400 kN Stroke: 100 mm Ejector in Ram Ejector force: 50 kN Stroke: 50 mm MACHINE DETAILS Fpodpfxjxgt Tzo Ah Dor Weight: 25,000 kg Electrical Data Pump Unit Ram + Drawing Cushion Rated power: 37 kW Rated current: 72/66 A Voltage: 660/380 V Frequency: 50 Hz Protection class: IP 54 Pump Unit Control Circuit + Ejector Rated power: 7.5/15.5 kW Rated current: 15.5/26.5 A Voltage: 660/380 V Frequency: 50 Hz Protection class: IP 54 Cooling-Filter Circuit Rated power: 2.2 kW Rated current: 5 A Voltage: 380/220 V Frequency: 50 Hz Protection class: IP 54 Oil Cooler Rated power: 0.37 kW Rated current: 1.2 A Voltage: 380/220 V Frequency: 50 Hz Protection class: IP 54 Tool Clamping Rated power: 0.55 kW Rated current: 2.6 A Voltage: 380/220 V Frequency: 50 Hz Protection class: IP 54 Stop Spindle Rated power: 0.75 kW Rated current: 2.3 A Voltage: 380/220 V Frequency: 50 Hz Protection class: IP 54 Oil Circulation Lubrication Rated power: 0.3 kW Rated current: 1.3 A Voltage: 380/220 V Frequency: 50 Hz Protection class: IP 54 Operating hours: 20,242 h EQUIPMENT Decoiler (Year: 1999) Straightening machine (Year: 1999) Feed unit (Year: 2004) Tool breakage monitoring system Note: The seller strongly recommends a prior inspection of the machine, as the press cannot be removed from the hall in its assembled condition. If required, the seller can possibly arrange a specialized company for relocating the machine.

Condition: good (used), functionality: fully functional, pressing force: 1,500 t, table width: 2,440 mm, table length: 4,572 mm, die cushion stroke: 360 mm, clearance between the columns: 4,800 mm, stroke length: 1,320 mm, Equipment: documentation/manual, Manufacturer Muller Model BZE 1500 Year 1980 Excellent condition Stock number cod.0313 Thrust: 1500 ton. Thrust points: no. 6 Fpedpfxeq Hdz Ue Ah Dsr Slide stroke: 1320 Maximum sled opening:m 2,620 mm. Maximum slide closure:m 1,300 mm. Slide size: no. 6 Table size: 4,572 x 2,440 mm. Stroke premiums bottom plate: 360 mm. Useful front passage: 4,800 mm. Lateral passage in the shoulder: 2,600 mm. Pull-out carriage with possibility in the upright Location :Italy

Condition: used, functionality: unexamined, pressing force: 3,200 t, For sale: Used Dieffenbacher hydraulic press with a pressing force of 3200 tons. Originally designed for heavy-duty forming applications in the metal and automotive industries. Condition: used. Fpsdpoxft S Iofx Ah Dor Location: Montenegro. Contact us for more information.

Condition: used, Year of construction: 2011, operating hours: 1,000 h, functionality: fully functional, total height: 4,200 mm, table height: 700 mm, total width: 3,000 mm, total length: 2,000 mm, pressing force: 1,200 t, table width: 3,000 mm, table length: 2,000 mm, overall weight: 60,000 kg, ram plate width: 800 mm, ram plate length: 600 mm, distance table to ram: 700 mm, type of input current: three-phase, distance between stands: 2,200 mm, stroke length: 600 mm, oil tank capacity: 700 l, control cabinet width: 400 mm, input voltage: 380 V, control cabinet height: 2,000 mm, Equipment: safety light barrier, H-frame, 4 columns, daylight 700 mm, stroke 600 mm, distance between columns 2200 mm x 1260 mm, dimensions (LxWxH) 3000x2000x4200 mm, 380V-15kW, weight 60,000 kg Fodpfexn Rvcjx Ah Dspr

Condition: as good as new (ex-display), Year of construction: 2021, Gantry straightening press with 400 T capacity a) idle and pressing speed up to 17 mm/sec. b) opening speed up to 60 mm/sec c) table size 6000x3000mm d) open height 1500 mm e) total size approx. LBH 6000 x 5000 x 4500 mm f) Oil temperature indicator on the tank g) Lubrication via grease nipple h) Table in grid construction, i) operation on swivel arm, mounted on the bridge j) pressure adjustment from 60 T to 400 T via MONITOR k) Bridge moves by two gear motors, via toothed racks l) Cylinder moves to the left and right via toothed racks m) Machine body powder coated, or double painted n) T-slots according to customer requirements o) cylinder induction hardened PORTAL PRESS Thermally neutral 80 - 120 °C Number of operating sides 3 side Forces Pressing force max. 4000 kN Fjdpfxshyc Nwe Ah Dopr Free ripping force max. 600 kN Pressure build-up time Closed die Steel to steel Max. 3 sec. Dimensions Max. Opening width 1500 mm Stroke and min. opening 1500 mm/ 0 mm Table height above floor approx. 900 mm Height above floor (headroom) approx. 4500 mm Hall height min. 5500 mm Deflection Determined at max. clamping force with 70% occupancy < = 0.8 mm/m Weight Total weight of press without operating materials and table plate approx. 52 T Speeds Fast closing with 17 mm sec. Sound pressure Sound pressure level, measured at 1.5 m height at the control panel according to DIN 45635-T16-KL3 max. 78 db(A) Hydraulics Number of pressing cylinders 1 pc. Operating pressure max. 280 bar Pressing pressure build-up time 2-3 sec. Pressure accuracy during pressing stroke +/- 5 bar Main pump BOSCHREXROTH approx. 150 L/min Oil volume approx. HLPD 46 MW 900 liters Ambient temperature max. 45 °C Oil temperature max. 55 °C Electrical system Main supply 400 V AC Control voltage 24V DC Frequency 50 Hz Connection hydraulics Main motor IE3 30 kW Total connection Approx. 35 kW

Year of construction: 1992, condition: excellent (used), Used 700ton H-frame hydraulic press for sale Make: Muller Capacity (ton) : 700 Fpsdpfjhcfzkex Ah Djr Number of pistons : 2 Table dimensions ( x-y/mm) : 4000×2200 Slide dimensions ( x-y/mm) : 4000×2200 Stroke ( mm) : 1400 Light at tdc ( mm) : 1920 Cushion power ( ton ) : 400 Cushion stroke (mm) : 500

Condition: ready for operation (used), total height: 2,140 mm, total width: 865 mm, total length: 1,665 mm, passage width: 1,100 mm, power: 2.2 kW (2.99 HP), empty load weight: 970 kg, load capacity: 1,00,000 kg, Arlo 100 T / 1000 Vario Max ram adjustment: 380 mm Fsdpjxc Rbbsfx Ah Djpr Drawningspeed: 7,54 mm/sec Workingspeed: 2,47 mm/sec Returningspeed: 9,06 mm/sec

Year of construction: 1993, condition: used, TYPE : DEA 400/2000 Type YEAR : n.d. Fpsdpeihf R Ujfx Ah Der Year MAXIMUM SLEDGEHAMMER PRESSURE : TON. 400 Ram capacity SLIDING STROKE : mm. 1,100 Slide strok MAX VERTICAL LIGHT : mm. 1,600 Max shut height TABLE DIMENSIONS : mm. 2,000 x 1,600 Table size RAPID SPEED : mm/sec 650 Fast stroke TABLE PRESS CAPACITY : TON. 160 Cushion capacity PRE-MILER stroke : mm. 400 Cushion stroke HEIGHT ABOVE GROUND : mm. 5,800 Ground up to floor FRONT LIGHT : mm. 3,400 Distance btw uprights LATERAL LIGHT : mm.1,600 Lateral window

Condition: new, Year of construction: 2025, pressing force: 150 t, table width: 1,000 mm, table length: 3,100 mm, Equipment: safety light barrier, PLACE OF PRODUCTION: TURKEY WARRANTY PERIOD: 24 MONTHS DELIVERY FROM STOCK 2025 MODEL NEW AND UNUSED 150 TONS H TYPE HYDRAULIC PRESS TECHNICAL SPECIFICATIONS TYPE STEEL CONSTRUCTION, 8 SLIDE H PRESS BODY TYPE BODY MATERIAL St52 – ERDEMİR CAPACITY (RAM) 150 TONS MOVABLE TABLE DIMENSIONS 3100 x 1000 mm FIXED TABLE TABLE DIMENSIONS 3100 x 1000 mm PARALLELITY TOLERANCE 120 micron/mt. PERIPHERALITY TOLERANCE 60 micron/mt. STROKE (RAM) 600 mm MIN. INTERMEDIATE SPACE 100 mm MAX. INTERMEDIATE SPACE 700 mm WELDING STRESS REMOVAL Stress relief by vibration WELDING APPLICATION - EN ISO 15614-1/2017 welding application certificate accredited by TÜRK-AK and approved by WPQR and WPS. (Welding applications are supervised by “welding coordination engineers” certified according to EN ISO 14731) MAX. WORKING PRESSURE 250 Bar TOTAL MOTOR POWER 22 kW– IE3 MAIN PUMP 37 cm³ – PARKER MOVING TABLE FAST Descent Speed 140 mm/sec. MOVING TABLE SPINNING SPEED 14 mm/sec. MOVING TABLE RETURN SPEED 170 mm/sec. MAIN CYLINDER INNER DIAMETER Ø 160/120 mm – Ck45 – 3 pcs. ASSISTANT CYLINDER INNER DIAMETER Ø 90/70 mm – Ck45 APPROXIMATE HEIGHT OF PRESS 4000 mm APPROXIMATE WIDTH OF PRESS 3500 mm APPROXIMATE DEPTH OF PRESS 2000 mm LOWER TABLE HEIGHT FROM THE GROUND 1000 mm PRE-FILL VALVE NG 80 – 3 pcs. HYDRAULIC UNIT PARKER COOLING SYSTEM SUCTION – CIESSE ENGINE CLASS USED FOR THE UNIT IE3 LEVEL INDICATOR PARKER Fedpfjv Inrlox Ah Dopr AIR FILTER PARKER – 10 MICRON PERMEABILITY RETURN FILTER PARKER – 25 MICRON PERMEABILITY OIL AND HEAT INDICATOR PARKER VALVES USED PARKER LUBRICATING STYLE AUTOMATIC – (ADJUSTABLE FROM THE SCREEN) RAM STROKE ADJUSTABLE FROM THE SCREEN RAM TONNAGE (PRESSURE) ADJUSTABLE FROM THE SCREEN SYSTEM ERROR INFORMATION CAN BE SEEN ON THE SCREEN PRESS STATUS INFORMATION SCREEN VISIBLE ON THE SCREEN MOULD MEMORY CAN BE ADJUSTED FROM THE SCREEN HYDRAULIC UNIT OIL TEMPERATURE INFORMATION CAN BE VISIBLE ON THE SCREEN LINEAR DISTANCE SCHEDULE NOVATECHNIK PLC APPLICATION DELTA TOUCHSCREEN PANEL DELTA 7 ‘’ SWITCH MATERIALS SIEMENS – SCHNEIDER APPROXIMATE WEIGHT 20 TONS

Year of construction: 2005, condition: like new (used), Used Kojima 2200ton hydraulic H frame press for sale Machine Type Hydraulic Press Fodpfx Aolqxg Hjh Dopr Make Kojima Capacity 2200 tons Stroke 1200 mm Daylight 1800 mm Slide 3200 x 1800 mm Moving Bolster 3200 x 1900 mm Moving Bolster Stroke 2500 mm Moving Bolster Speed 100 mm/sec Die Cushion 100 – 500 ton Cushion Stroke 450 mm Cushion Pad 2000 x 1275 mm Cushion Pin 50 mm dia Slide descending speed 235 mm/sec Hydraulic Tank 3200 litre

Condition: like new (used), Year of construction: 2008, YEAR : 2008 Year MAXIMUM PRESSURE OF THE RAM : Ton. 2.000 Ram capacity SLIDE STROKE : mm. 1500 Slide strok TABLE DIMENSIONS : mm. 5000 x 2380 Table size PRESSION OF THE BLANKHOLDER UPPER : Ton.300 Fjdpsvm Eixefx Ah Djpr Blankholder STROKE OF THE BLANKHOLDER SLIDE : mm. 200 Cushion stroke ram RAPID SPEED : mm/sec 220 Fast stroke PRESSION OF THE BLANKHOLDER CAPACITY : Ton. 600 Cushion capacity STROKE OF THE BLANKHOLDER SLIDE : mm. 400 Cushion stroke HEIGHT ABOVE GROUND : mm. 9,145 Ground up to floor FRONT LIGHT: 5000 mm Distance btw uprights TOTAL WEIGHT: KG. n.d

Condition: excellent (used), Year of construction: 1991, pressing force: 250 t, operating speed: 240 mm/s, Used Rhodes Hydraulic 250ton Hydraulic Press for sale 250 / HDS New PLC in March 2023 - BEIJER ELECTRONICS Fodpfx Aevt Agnoh Dspr PRESSURE 250 TONNES MAX. STROKE - VARIABLE 30 мм TO 500 мм SLIDE SPEEDS - APPROACH 240 MM/SEC PRESSING - 22 MM/SEC. RETURN - 230 MM/SEC 2 DIE CUSHIONS - FORCE 35 TONNES / CUSHION STROKE - 200 M MAX. SERIAL NUMBER YEAR OF MANUFACTURE 1991 250 TONNES MAX. 35 TONNES / CUSHION

Year of construction: 2008, condition: excellent (used), SMG HZPU 8000-3000/2100-S1 Hydraulic Drawing Press Brand SMG Type HZPU 8000-3000/2100-S1 Fedpfx Ahjn Awd Re Dopr Year 1995 Description Hydraulic Drawing Press H frame hydraulic press Pressing force 800 ton Clamping area Approx. 3,000 x 2,100 mm Installation height Max. 1,400 mm

Year of construction: 2012, condition: used, Hounsell down stroke Hydraulic forming press H frame Year 2012 200ton Daylight 750mm Nominal Table size W x L 2100mm x 1200mm Max Weight top tool 800kg Max system Pressure 340 bar Ram diameters 110mm Number of Rams 6 Seal Dimensions 110 x 130 x 16 Fpjdpjf A R Uhjfx Ah Dsr Machine construction fabricated frame Machine weight 95000 kg approx Approach speed 150mm/s Pressing speed 8mm/s Return speed 80-90mm/s Can quote for new hydraulic presses c and h frame

Year of construction: 1985, condition: used, Used HUGH SMITH 1000 Ton Hydraulic 4 Post Downstroking Press for sale Operating Speeds 50 mm/sec. Gravity approach. 6 mm/sec. Pressing. 50 mm/sec. Return. Working Height 1060 mm. Press Weight 102 tons total. Towler Hydraulics. Fpsdpsf A R Uzjfx Ah Djr Machine originally upstroke (see original drawing attached) but converted to downstroke and refurbished in 1985 (see updated drawing attached) with new electrics. Brand new c, h and d frame hydraulic presses for sale – can quote at competitive prices and built to your specification. New 1000ton hydraulic presses available for sale upon request

Year of construction: 1990, condition: like new (used), Used Schuler hydraulic press for sale Fpsdpfx Aehcnxreh Dsr Brand : Schuler Schuler EB 2-500- 2.75-0.85 H-frame hydraulic press Power ( ton ) : 500 tons Table dimensions ( x-y/mm) : 3000×1800 Slide dimensions ( x-y/mm) : 3000×1800 Stroke ( x/mm) : 850 Stroke per minute from 12 to 24 Control Siemens S7 New hydraulic presses for sale