Used hydraulic single column presses 0-15t for sale (37)

Condition: not inspected (used), Combined shearing and bending machine, bending length 6000 mm Fedpfx Afsy Rfpfepopi

Condition: excellent (used), Year of construction: 1975, -KOM 1002-

 Offered here is a press of the company HYDRAP of the type HKPS8000. Technical data: Type: HKPS8000
 Year of manufacture: 1975
 effective stroke: 200mm throat: 250mm (at center) table size: 320x320mm Installation height: approx. 345mm Voltage: 380V 
Perm. load: 80000N
 Drive type: HYDR Drive power: 1,5kW Fodeg Ufvbopfx Afpepi Oil quantity: 60l Oil viscosity: 3°E

Condition: used, Single-column hydraulic press, DUNKES Type HZT 2.5 Machine No. H94-2558, Year of manufacture 1994 Clamping force 2.5 tons Overhang 180 mm Table surface 420 x 300 mm Through-hole in the table 60 x 185 mm Ram surface Ø 40 mm Dowel hole for clamping Ø 20 mm Ram stroke 160 mm Maximum installation height 250 mm Rapid traverse downward 65 mm/sec Rapid traverse upward 160 mm/sec Working speed 8.3 mm/sec Table height above floor 950 mm Hydraulic operating pressure 135 bar Hydraulic tank capacity approx. 100 liters Drive power 1.5 kW Power connection 400 volts, 50 Hz - Installation height can be increased by shortening the piston rod by 80 mm - Pressure and stroke limitation - 2-hand operation on the machine - Stroke counter - Safe press control with 2 monitored hydraulic valves - UVV 11.064 VGB 7.n.5.2 (for manual insertion operations) - 32047 operating hours recorded - Electrical wiring diagram and hydraulic diagram available Space requirement L x W x H 1100 x 980 x 1950 mm Weight 700 kg Very good condition Fpedpfx Ash Uhqyofpsi

Condition: used, Single-column hydraulic press SCHÖN type FES / C 7 Machine no. No. 4281 Year of construction 1995 Pressure force 7 ton. throat 170 mm Projection round cycle station 60 mm Table size 310 x 200 mm Rotary indexing table Ø 400 mm, with 12 indexing stations Plunger surface approx. Ø 100 mm Plunger plate 315 x 200 x 35 mm Ram stroke 100 mm Installation height rotary table - ram plate max. 130 mm Table height above floor 890 mm Ram speed rapid traverse downwards approx. 300 mm/sec. Ram speed rapid traverse upwards approx. 300 mm/sec. Ram speed Working speed approx. 30 mm/sec. Drive power 1.5 kW Mains connection 380 Volt, 50 Hz Tank capacity approx. 50 liters hydraulic oil - Rotary indexing control via SIEMENS S7- 1200 - GECHTER pneumatic rotary indexing table with 12 indexing stations - Mechanically adjustable fixed stop - Adjustable pressure holding time in the UT - electrical 2- manual operation Fpsdpfx Afor I E Itspji Space requirement L x W x H 1450 x 850 x 1900 mm weight 700 kg good condition

Year of construction: 1985, condition: like new (used), Wanzke hydraulic high speed press SP/F12 -WKG 499- Offered here is a hydraulic high-speed press from the company Wanzke. This press is in mint condition! Technical data: Manufacturer: Wanzke Type: SP/F 12 pressing force: 120 KN retraction force: 17,8 overrun time: 0,028 sec Fsdshgiyispfx Afpepi year of construction: 1985 Main drive: 1,5kW / 1,5kW Mains voltage: 380V 50Hz Control voltage: 220V 50Hz Overtravel: 2,8mm safety distance: 4mm Accessories: decoiler GM1

Condition: new, functionality: fully functional, pressing force: 28 t, stroke length: 150 mm, table width: 300 mm, table length: 325 mm, throat depth: 225 mm, TECHNICAL DETAILS Pressing force: 28.0 t Throat depth: 225 mm Stroke: 150 mm Table size: 325 x 300 mm Working speed: 2.0 - 9.8 mm/s Return speed: 12.8 mm/s MACHINE DETAILS Total power requirement: 4.0 kW Dimensions & Weight Space required: approx. 1,800 x 900 x 2,000 mm Machine weight: approx. 650 kg EQUIPMENT NC control for adjusting the ram stroke Selector switch for manual or semi-automatic operation Flow control and pressure relief valve Fjdpfx Afeyg Dr Aepspi Integrated pressure gauge Various tools can be mounted on the ram; there is a 40 mm hole inside for securing the tools.

Condition: excellent (used), Year of construction: 1984 Pressing force: 10 t Total pressing area: 300 x 300 mm Stroke: 540 mm Fedperyn S Aefx Afpepi Dimensions W x D x H: approx. 900 x 500 x 2150 mm

Condition: good (used), Hydraulic punching machine, type EHS, HE - Punching force approximately 12t (EHS-120) to approximately 20t (HE-20) - Power approximately 2.2kW / 3kW - Stroke approximately 100 mm Fedjd A Tp Topfx Afpepi - 2-hand safety control, alternatively foot switch Other hydraulic and pneumatic punching machines in stock. Do you need the right punching tool? - Let us know. We will gladly provide you with a suitable offer.

Condition: used, Year of construction: 1979, pressure 10 t throat 250 mm stroke 400 mm feed down 100 mm/sec feed up 450 mm/sec Fpodpfxswbizye Afpei max. distance table - ram 630 mm total power requirement 5,2 kW weight of the machine ca. 1,3 t

Condition: used, Year of construction: 1978, pressure 7 t throat 180 mm stroke 100 mm table surface area 300x300 mm ram surface Ø105 mm Fpodpfx Aovnwfbofpoi hole in the table Ø60 mm table height 1050 mm tool hole in ram Ø30 mm total power requirement kW dimensions of the machine ca. BxTxH 1200x1200x2100 mm

Condition: good (used), Press force: approx. 6 tons Table size: 400 x 300 mm (W x D) Table opening: Ø 133 mm Ram size: Ø 70 mm Thrust: 178 mm Installation height: 240 mm (top stroke) Stroke: 1-100 mm Weight: approx. 480 kg Fpsdpevxvtxjfx Afpji Drive power: 2.2 kW Other features • Hydraulically driven • Continuously adjustable stroke rate • With protective screen for inserting work with secure tools • With height-adjustable mounting bracket (feed optional)

Condition: used, pressure 2 t Fodpfstzv Hmox Afpspi throat 150 mm stroke 150 mm table surface area 310 x 250 mm power requirement 2,0 kW weight of the machine ca. 0,6 t dimensions of the machine ca. 1,2 x 0,8 x 1,7 m Single column press - with table base - various press accessories