Used measuring systems for sale (290)

Condition: used, FRT MicroSpy Device Designation: FRT MicroSpy Mobile Art. No. MSP 105 00 Device Number: MSP1033 FRT MicroSpy Mobile Portable Optical Profilometer for non-destructive 3D surface measurements directly on the component. Due to its portability, the MicroSpy Mobile is ideally suited for mobile use on large machines, vehicles, rollers, glass panes, or other large components. This enables high-resolution and non-destructive measurements on-site to determine important characteristics of surfaces, such as roughness, contour, topography, layer thickness, wear, load-bearing capacity, or volume. Smaller samples can be measured directly on the measuring table. Usable on large construction and machine parts Excellent resolution values Excellent reproducibility Non-destructive measurement Handles and adjustable support feet Low weight (approx. 5 kg) FRT Technical Specifications: Dedpfxozdnqce Aizjcp Device: MicroSpy Mobile xy-travel range: 50 x 50 mm² xy-table Type: compact XY cross table with open frame Bearing: mechanical crossed roller guide Drive: DC motor with ball screw Travel range (XY measuring range): 50 x 50 mm² (or 20 x 20 mm² with CWL 3mm) Position measuring system: rotary encoder Measuring system resolution: 0.25 µm XY repeatability: < ± 1 µm Table height deviation (per axis): < 2 µm / 50 mm (of which is not reproducible): < 0.5 µm XY squareness: < 4 µm / 50 mm z-axis, motorized: Type Position Drive Travel range Position measuring system Measuring system resolution Axis straightness Gross adjustment, manual: Type: dovetail guide with fine drive Adjustment range: 25 mm Measurement: Minimum point spacing xy: 1 µm Sample size: - Sample weight: - Min. measuring speed: 1 µm / sec Max. measuring speed: 50 mm / sec Overall system: Total weight: approx. 150 kg of which measuring unit: approx. 5 kg Footprint measuring unit: approx. 0.3 x 0.3 m² Dimensions controller (W x D x H): approx. 0.65 x 0.65 x 1.0 (1.6) m³ Voltage supply EU version: 110 - 240V, 50 - 60Hz, z 16A Voltage supply US version: 110 - 240V, 50 - 60Hz, z 16A Power consumption: typ. 300-400 W Compressed air supply: - Ambient temperature: 22°C ± 5°C Temperature stability: < 0.5°C/h Environmental conditions: measuring room Scope of delivery: 1 x XY table with 50 x 50 mm² travel range 1 x Mobile base with electronics 1 x Chromatic sensor FRT CWL 600 µm 1 x Electronics for chromatic sensor 2 x Keys for computer 2 x Keys for rear door 1 x Power cord for power supply 1 x Mouse (PS/2) 1 x Keyboard 1 x 19'' TFT monitor Type: FRT MicroSpy Mobile Condition: used Scope of delivery: (See picture) (Changes and errors in the technical data are subject to change!) We will gladly answer any further questions you may have by telephone.

Condition: ready for operation (used), Year of construction: 2012, MarSurf M400 MarSurf SD 26 Mahr roughness measuring device with evaluation unit Brand: MAHR Model: MarSurf M 400 Touch probe: Free touch probe Measuring range roughness: +/- 250 µm, +/- 750 µm Scanning distance min.: 1.75 mm Scanning distance max.: 17.5 mm Cut-off wavelength: 0.25 mm, 0.8 mm, 2.5 mm Measuring profile memory (number of individual values): 40000 STK Measuring profile memory (number of profiles): 30 ST New price: 11.190 € net Dcedoq Nl Ewspfx Aizep - Bluetooth connection between the feed unit and the display unit. - Measure in all directions horizontally, vertically and overhead. You are welcome to visit us for an inspection. You will receive a proper invoice. A net invoice can also be issued for foreign customers. Prerequisite is a valid VAT number. Subject to prior sale. Visit our store and have a look at our other offers. Company names and trademarks are the property of their owners and are used only to identify and describe the products. Deviations from technical data and errors in the description of the article may occur and are reserved.

Condition: good (used), Year of construction: 2015, machine/vehicle number: FS0B000351, type of input current: AC, measuring range Z-axis: 3,000 mm, total width: 260 mm, total length: 310 mm, total height: 100 mm, overall weight: 5 kg, ambient temperature (max.): 40 °C, Equipment: documentation/manual, Technical Specifications: 3D Point Accuracy: ≤ 1.0mm Indoor Scanning Volume: Up to 8m³ IP Rating: IP52 Operating Temperature Range: 0 – 40°C Condition Details: Main Scanner and Laser: Impeccable condition Tablet, Calibration Board, and Accessories: Good condition with minor scratches Carrying Box: Displays wear but effectively protects the scanner Included in the Kit: Faro Freestyle-3D X Scanner Tablet Surface Pro 3 (Microsoft) Dcsdpfx Aijqxa Niszop Calibration certificate MicroSD Card and USB stick Calibration Plate Cleaning Kit Rugged Transport Case Company used scanner. Always kept in box after use.

Condition: good (used), Keyence RB-1200 3D Bin-Picking Robot Vision System with Camera Unit and Controller Manufacturer: Keyence Model: RB-1200 Type: 3D Bin-Picking Vision System for Robots System: Industrial image processing system for automatic part recognition Camera Unit: Keyence RB-1200 Vision Sensor Components: Camera unit, vision controller, mounting frame with four sensor modules Dcedpsz Dlaljfx Aizjp Function: 3D detection and position determination of unordered parts in containers Application: Automated picking and removal of parts by industrial robots Connections: Industrial communication interfaces on the controller Scope of delivery: Camera unit, controller, sensor mounting frame, connection cables Condition: Good Location: Fulda

Condition: new, functionality: fully functional, The Trimos V1+ is the enhanced version of the proven V1 and is ideal for users who want to combine maximum precision with straightforward operation. It offers all the benefits of the V1, with the addition of bidirectional measurement capability for diameter, centerline, and comparative measurements—a true advantage over conventional entry-level models. Manufactured in Switzerland, the V1+ stands for quality, durability, and outstanding repeatability. It is perfectly suited for use in workshops, inspection rooms, and production environments. Thanks to its ergonomic design, stable base, and sensitive guidance, the V1+ can be operated precisely and safely. The constant measuring force ensures consistently reliable results. V1+ models: V1+ – 300 Measuring range (mm): 306 Accuracy (mm): 0.015 Repeatability (mm): 0.005 (Ø: 0.01) Resolution (mm): 0.001 Measuring force (N): 3 Autonomy (h): 2000 Dcedsxu T Egjpfx Aizep Max. travel speed (mm/s): 1500 Weight (kg): 7 (steel base) / 13.4 (granite base)

Condition: ready for operation (used), Year of construction: 2018, functionality: fully functional, machine/vehicle number: W25-M5-18-17210, number of axes: 7, The measuring arm was last calibrated in October 2024. The laser scanner was calibrated in April 2024. TECHNICAL DETAILS Measuring system: FARO Quantum M ScanArm Measuring range: 2.5 m Axes: 7 Measuring method: Tactile coordinate measurement and 3D scanning Laser scanner head: FARO LLP HD, Revision 3.2 MACHINE DETAILS Application areas: Dimensional inspection, CAD component comparison, first article inspection (FAI), production control, tool and fixture inspection, and reverse engineering Measuring stand height: 750 - 1,000 mm Measuring stand weight: 17.25 kg Reach: 350 mm EQUIPMENT FARO LLP HD laser scanner head, Revision 3.2 Tactile probes MetrologyWorks Kodiak HDP-KCF measuring stand Measuring stand construction: Carbon fiber/aluminum Measuring stand mounting ring: 3"-8 Original FARO transport case Batteries Power supply Cables Mounting accessories Dcodpfx Aiszx N Rgjzsp Calibration documentation Technical documentation Manual Note: The laptop and PolyWorks software are not included in the offer.

Condition: new, VHX-600E, Keyence Digital Microscope - New Dcsdpfx Aieq S Ti Eszop Model: VHX-600E Type: VHX-600E Condition: New

Condition: excellent (used), Year of construction: 2019, digital height gauge / electronic height measuring instrument Length:1200mm Width:800mm Height:1400mm Dsdpjy Uvhyefx Aizscp Weight:500kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: ready for operation (used), Year of construction: 2012, functionality: fully functional, machine/vehicle number: 7525SE-0949-FA, measuring range X-axis: 2,600 mm, number of axes: 7, TECHNICAL DETAILS Axes: 7 Measuring range: 2.6 m Accuracy Acceptance temperature: 20 °C Humidity during acceptance: 50 % Permissible single-point deviation: 0.028 mm Determined single-point deviation: 0.010 mm Maximum permissible volumetric length measuring deviation: ± 0.039 mm Determined volumetric length measuring deviation: -0.018 mm Scanner Manufacturer: Hexagon Model: CMS108 Integration: Calibrated within the measuring arm Note: Can be used on the measuring arm with appropriate scanning software Note: Scanning software not included in the scope of delivery MACHINE DETAILS Design: Portable measuring system Dcjdpfx Aiezv Rhujzsp Weight of measuring system including transport case: approx. 40 kg External dimensions of transport case for measuring arm: approx. 1,350 x 550 x 350 mm Dimensions of tripod: approx. 750 x 750 x 750 mm Weight of tripod: approx. 75 kg Dimensions of scanner case: approx. 600 x 450 x 220 mm Weight of scanner including carrying case: approx. 6 kg Notebook size: 17 inches Note: The measuring arm was relabeled before the last calibration. EQUIPMENT - Hexagon ROMER Absolute Arm RA-7525SE measuring arm, 7-axis - Mobility Pack FP2-1503-FA with wireless computer connection - Transport case for measuring arm - Magnetic base - Test bar, length 700 mm - Test sphere, diameter 25 mm - Probe box with 3 probes - Probe with ruby ball, diameter 6 mm - Probe with ruby ball, diameter 3 mm - Calibration sphere, diameter 15 mm - Dust cover - Complete cable set - Calibration certificate for measuring arm, notebook Dell M6600 - PowerInspect 11 software including hardware dongle - Hexagon RDS software - Brunson 231 roll stand, height-adjustable - Height adjustment range of tripod: approx. 700 to 1,100 mm - Scanner Hexagon CMS108 - Carrying case for scanner - Calibration certificate for scanner Note: PowerInspect 11 is exclusively for tactile measurements and cannot be linked with a scanner. Note for packaging request: €250 for special pallet with cardboard construction and tripod on a Euro pallet.

Condition: used, Technical details: space requirements of the machine approx.: 2x Boxen: 0,85x0,55x0,40 / 0,10x0,55x0,4 m Aramis 3D Camera = robust design for high-end applications with high-resolution 3D sensor. Camera resolution 1936 x 1216 pixel Frame rate (fps) 130 fps at full resolution; 24 fps at 1/2 image height; 450 fps at 1/4 image height: Aramis Adjustable = modular and flexible measurement system for research and industry with user-friendly application. without software (only via manufacturer ) Dedpfou N Auhjx Aizscp *

Condition: not inspected (used), Year of construction: 2005, functionality: unexamined, Measuring computer Metrel (now Marposs) including measuring probes (3TL + 4x short + 12x long) removed from measuring device Dcjdpfx Aisvl Eurjzsp including 2x probe boxes and 2x control panels 2nd measuring computer available on request, but some components removed, not functional But with Metrel control cards

Condition: not inspected (used), Year of construction: 2020, functionality: unexamined, machine/vehicle number: 71193, measuring range X-axis: 3,000 mm, total width: 500 mm, total length: 1,000 mm, total height: 1,000 mm, overall weight: 30 kg, positioning accuracy: 0.045 mm, ● Availability: By arrangement ● Internal No.: ZM3 Technical data: Measuring volume: 3,000 mm Accuracy: 0.045 mm Scope of delivery: ● Includes laptop and software as shown in the images (completeness not guaranteed) ● Includes transport case Dimensions & weights: ● Installation dimensions (L x W x H): approx. 1,000 x 500 x 1,000 mm ● Weight: approx. 30 kg Additional notes: ►Upon request, we can offer transport to the desired location. ►The goods are sold with no warranty of any kind. Dedpoz A Tcfefx Aizecp ►Technical data subject to change. ►The red base frame is not included in the scope of delivery.

Condition: like new (used), Mitutoyo Linear Scale AT 600 New in original packaging Dcodsym Aiyspfx Aizjp

Condition: new, Magnetic position transmitter / sensor. (Measuring range: 160 mm). Dodpfs Afdu Rsx Aizscp

Condition: new, Year of construction: 2010, connected load frequency 230 V dimensions 1,6 x 0,8 x 1,55 mm Bubble wrap machine Djdjx Dnftepfx Aizjcp - Documentation - Includes 7 rolls of film - Like new condition See pictures

Condition: used, Year of construction: 2015, Faro Prime Measuring Arm Condition: Used Year of Manufacture: 2015 Features: Dcjdpsy Nl H Uefx Aizep - Temperature and overload sensors - Compatible with multiple measuring probes - Internal weight compensation - Wireless operation Advantages: - Repeatability accuracy starts at 0.016mm - Exclusive 6-axis version - Unrestricted rotational flexibility - Versatile, suitable for both production and metrology applications - Lightweight design thanks to new materials - Arm reach of 0.9 m, working volume of 1.8 m (6 ft), 6 axes, tactile arm - Includes calibration certificate, accessories, and

Condition: used, Surface measuring instrument Mahr Perthometer S2 Used, as shown in the pictures From stock (may have storage marks) Please refer to the pictures for further technical information Scope of delivery as shown in the pictures With invoice The invoice will be enclosed with the shipment. Payment method Bank transfer Self-collection Dedpfx Aozkl Dyeizecp Information about bank details, payment terms, etc. will be sent to you by email. W120

Condition: good (used), Year of construction: 1999, functionality: fully functional, machine/vehicle number: 0509, input voltage: 230 V, For sale is an analogue presetting device Zoller Bravo 2. The item is in good condition. Dcsdexwlpcjpfx Aizep Presetting device Zoller Bravo 2 Serial number 0509 Year of manufacture 1999 Voltage 230 V∼ L/N/PE Frequency 50/60 Hz Tolerance (voltage) −10% to +6% Pneumatics (compressed air) 4−6 bar Power

Condition: new, Masoneilan Baker Hughes Control Valve DN/NPS 3" Class 300 – ATEX – Positioner High-quality Masoneilan control valve assembly, complete with pneumatic actuator, positioner/control system, pressure gauges, and accessories. The unit appears to be in unused/excellent condition and is supplied with original Baker Hughes documentation. Condition: Unused/surplus condition Location: Rotterdam, The Netherlands Availability: Immediately available Worldwide shipping can be arranged. SURPLUS – Industrial Solutions From Surplus to Second Life Dcsdpfx Aiozz R Skezep

Condition: used, Year of construction: 2008, dimension of workpiece 2400 mm voltage 26,8 V total power requirement 26,8 kW weight of the machine ca. 0,040 t Dcsdox Dda Tjpfx Aizep

Condition: excellent (used), For sale: SaluTron D2 paint thickness gauge. Djdpez Skqnefx Aizjcp

Condition: used, Year of construction: 2022, Ask for specification and pricing! Dedpfx Aijyi U A Rozecp

Condition: used, Year of construction: 2011, valve dimensional inspection Dcedpfxsyrg E Ao Aizjp *

Condition: ready for operation (used), X-axis: 300mm, y-axis: 200mm, z-axis: 200mm, working distance: 77mm, max. workpiece height: 200mm, max. workpiece weight: 20kg, length: 730mm, width: 900mm, height: 950mm, weight: 125kg, optical length measurement error (2D): 2.9 + L/100µm (L in mm) at 20°C ±1K, tactile length measurement error (MM2/TP20): 4 + L/75µm (L in mm), optical lens: 1.5x, screen magnification: 47-80x, field of view: 4.5x3.5mm, camera: 1.3 megapixel CMOS with autofocus. Equipment: 3-axis CNC control via servo drives and joystick, IK 5000 measuring software, IK 5000 measuring computer for 2D and 3D geometric measurements, integrated CAD module for DXF and IGES data, automatic fit routine for comparison of freeform contours, scaling routine, tolerance inspection according to DIN ISO 1101, data export to Microsoft Office or to databases/SPC/QS systems via ODBC interface, report generator for user-defined measuring tasks, storage of executed actions as measuring macros. An on-site inspection is possible. Dcjdpfx Aozc Rdwjizop

Condition: used, functionality: unexamined, machine/vehicle number: TDS 694C, Used Tektronix TDS 694 C 3GHz 10GS/s Digital Real-Time Oscilloscope. Manufacturer: Tektronix Model: TDS 694 C 4 channel, 3GHz, 10GS/s Dcodpfx Aioxlib Sozop Voltage: 100-240V