Used Other drilling machines and boring mills for sale (63)

Year of construction: 2015, condition: excellent (used), CNC Travelling Column Horizontal Boring and Milling Machine Mitsubishi MAF180C Spindle Diameter: 180 mm Vertical Head Travel, Y-Axis: 5,000 mm Iiedpfxowbnqmo Aaboh Column Travel, X-Axis: 18,000 mm Ram Travel, Z-1 Axis: 1,250 mm Spindle Travel, Z-2 Axis: 1,000 mm Ram Cross Section: 420 mm x 420 mm Total Axial Travel: 2,250 mm Spindle Taper: ISO 50 Spindle Speeds: 6-2,500 RPM Equipped with: Fanuc 31iMB CNC Control 100-position Automatic Tool Changer Right Angle Milling Heads 4,000 mm x 4,500 mm CNC Infeed Table Floor Plates Telescoping Steel Way Covers Operator's Platform 86 kW Spindle Motor

Year of construction: 1978, condition: ready for operation (used), Drilling spindle stroke: 160mm, spindle taper: MK4, spindle speed: 1750rpm, reach: 300mm, feed: 0.3mm/rev, table dimensions X/Y: 620mm/470mm, machine dimensions X/Y/Z: approx. 620mm/950mm/1900mm, weight: approx. 450kg. Includes coolant system and threading device. An on-site inspection is possible. Iisdpfxexc Ni Dj Aabeh

Condition: used, functionality: fully functional, Year of construction: 2016, machine/vehicle number: 607-9005, PROFILE DRILLING MACHINE PBA 3000 Used machine, year of manufacture 2016 For rational and efficient drilling of beams, profiles, pipes, and other long parts Technical Data: Max. travel path x-axis: 3000 mm Max. travel path y-axis: 250 mm Max. travel path z-axis: 350 mm Max. support length: 5700 mm (thanks to extendable support rollers) Max. support weight: 500 kg 3 mechanical vices Max. clamping width: 210 mm Clamping jaw width: 200 mm Jaw height: 60 mm Digital position display Stop points: 10 pcs. Drilling unit TSB 35 Technical Data: Motor: 1.2 kW, 400 V Drilling capacity in S235JR: ø 30 mm Continuous drilling capacity S235JR: ø 25 mm Tapping S235JR: M20 Spindle taper: MK 4 Spindle stroke: 155 mm Gearbox speed: 12 steps Speed range: 125 – 3030 rpm Iiedpfoxcuccsx Aabjh Minimum quantity lubrication Subject to prior sale. No liability accepted for typographical errors or omissions.

Condition: used, Year of construction: 1990, Type/Designation: 307-153/714-750 Serial Number: 82/293 Country of Manufacture: Made in West Germany (before 1990) Technical Data (approximate, for this type of CHIRON machine from the 1970s/80s): Machine Type: Column drill / single-station drilling machine for metal Motor Power: typically from 1.5 kW to 3 kW (three-phase, 380 V) Spindle Speeds: 100 – 4000 rpm (mechanically or electrically switched) Max. Drilling Diameter in Steel: approx. 20–25 mm (depending on the version) Spindle Taper: usually MT2 or MT3 Feed: manual or mechanical (some models equipped with automatic feed) Iiedsw T U Ubjpfx Aaboh Weight: several hundred kilograms (approx. 300–600 kg) Intended Use: serial production in industry (precise hole drilling, light milling operations in metals, use in production lines) Machine Table: cast iron, capable of securing workpieces Full control panel – variable speed adjustment available 2. Key Working Head Parameters (important for riveting): Press Force (kN) – if specified on the cylinder label or in the electrical box (often 10–30 kN for this size) Spindle/Slide Stroke (mm) – measure from top to bottom position Daylight (working clearance: distance between tool tip and table at top position) Throat Depth – from spindle axis to column (working reach) Max. Rivet Diameter / Work Range – specify based on tests or prior use Voltage: usually 380/400 V, 50 Hz 3. Dimensions and Logistics: L×W×H (of base/overall, in cm) Electrical Supply: 3×400 V, protection e.g. C16–C20 (indicate according to power rating) Weight (weigh with pallet jack with scale or estimate)

Year of construction: 2004, condition: used, machine/vehicle number: 0201-220031, FICEP DZ 603 drilling machine for sectional steel The Ficep DZ 603 is a drilling machine with 3 drilling axes for profile processing. This 3-axis drilling machine is designed for profile beam processing in steel construction. Steel profiles can be drilled and center-punched automatically on 3 axes (flange and web). The CNC control from Mitrol with Arianna software takes care of programming the drilling system. CAD data in DSTV or DXF format is converted into NC data in the CNC control and the machine starts the machine program in which the axes are moved to the specified position. A gripper measuring carriage positions the profile at the appropriate drilling position in the drilling unit. A 5-fold tool changer ensures fast drill bit changes on the individual drilling axes. A stable roller conveyor transports the steel profiles in the infeed and outfeed areas. Technical description Ficep DZ 603 drilling unit: Beam height: max. 610 mm Flange width: max. 450 mm Machining length: max. 11,300 mm CNC control Mitrol ARIANNA 3 drilling spindles suitable for HSS cooling channel drills Spindle speed: from 180 to 1000 RPM Drill diameter: min ø 8 mm - max ø 40 mm Power of the drilling spindles 7.5 kW each The DZ603 drilling machine is sold without marking unit. Isdpfxsrr Tauj Aabjih

Year of construction: 1985, condition: used, spindle diameter 110 mm x-travel 900 mm y-travel 600 mm z-axis 200 mm table length 1020 mm table width 860 mm Iisdpfx Aajt Hwyxsbeh taper MK 40 Table size, approx. 1,020 x 860 mm Max. weight of workpiece 800 kg Table travel, longitudinal, max. (X) 900 mm Boring head travel, cross, max. (Y) 600 mm Boring spindle stroke (Z) 200 mm Vertical travel of cross beam (W) 635 mm Vertical distance between table and boring spindle 15 - 850 mm Distance between columns 950 mm Spindle Ø 110 mm Spindle taper internal/external ISO 40 18 spindle speeds 10 - 2,500 rpm Milling feeds of table, infinitely variable 1 - 6,000 mm/min 4 milling feeds of boring head 30 - 180 mm/min 6 boring feeds 0.01 - 0.39 rpm Accuracy of all 3 axes when the machine was new 0.003 mm Quick feeds for table, boring head slide, and boring spindle, max. 6,000 mm/min Spindle drive 6.2 kW Weight, approx. 9,000 kg Total electrical load 15 kW - 380 V - 50 Hz Accessories / Special Features - BOSCH CNC Control, Model MICRO 8, in 3 axes, with monitor. Program input is either manual or via cassette, or via interface entry. - Digital display for Z Axis. - Separate switch cabinet. - Various tools. - Oil cooler for spindle lubrication.

Condition: new, Milling drill with gears Fervi T047/400VDA tapping 400V 1,5kW NEW MANUFACTURING " CE ". The machine can be used for the processing of: Iisdpfxsg Npiws Aabjh Milling Drilling Tapping. Drilling capacity on cast iron with pre-hole : ø 40 mm. Max. drilling capacity on steel with pre-hole: 32 mm dia. Milling capacity with insert cutter : 80 mm dia. Milling capacity : Ø 25 mm. Tapping capacity : Ø 22 mm. Conical shank : CM 4. Spindle stroke : 130 mm. Sleeve : ø 76 mm. Column : ø 115 mm. Head inclination : ± 60°. Spindle speed : (12) 75 ÷ 3200 rpm. Three-phase motor : 400 V 50 Hz 1,1 - 1,5 kW. Table dimensions : 585 x 190 mm. Keyway : 12 mm. Base dimensions : 648 x 412 mm. Overall dimensions: 740 x 790 x 1960h mm. Weight : 390 Kg.

Condition: ready for operation (used), Rotational speed: 37-1900/min, an inspection is possible. Iodpjqvnmfofx Aabsih

Condition: as good as new (ex-display), Year of construction: 2021, machine/vehicle number: 607-9027, PROFILE DRILLING MACHINE PBA 3000 for the rational and efficient production of holes in beams, profiles, tubes and other long parts Technical data: Max. Max. travel x-axis 3000 mm, Max. Max. travel y-axis 250 mm, Max. Max. travel z-axis 350 mm, Max. Support length 5700 mm (due to extendable support rollers), Max. support weight 500 kg 3 pcs. mech. vices Röhm BOF 4: Clamping width max. 220 mm, clamping width 160 mm, jaw height: 50 mm; Digital position indicator (accuracy +/-0.1 mm); Stop points: 10 pieces Drilling unit Maxion Unimax 3T AV Technical data: Motor 1.5 kW, 400 V Drilling capacity in St 37 ø 35 mm Continuous drilling capacity in St 37 ø 26 mm Thread cutting in St 37 M16 Spindle holder MK 3 Spindle stroke 125 mm Isdpfx Aajrdx A Sjbjih Speed range max. 3200 min-1 Automatic height adjustment z-axis Minimum quantity lubrication Pneumatic thread cutter M3-M12 Subject to prior sale. No warranty for misprints and errors.

Year of construction: 2025, condition: new, functionality: fully functional, machine/vehicle number: 60176, New pneumatic self feed drill unit with 2 signal transmitters and their holders good for drilling or milling Iiedpfx Aov Tnh Roaboh Speed (r.p.m. no load): 32,000 rpm Stroke: 40 mm dashpot: 15 mm Motor power: 0.25 kW Total length: 10.63 In. Operating pressure: 5.5 bar lubricated compressed air Suitable for collets (not included) with diameters of 3 to 8 mm Included are 2 signal transmitters (24 V DC, M8 connector, 5 m cable) and holders Other versions (speeds, stroke, etc.) are available upon request.

Year of construction: 1989, condition: excellent (used), 1 used centering drilling machine make Jones &Shipmann infinitely variable speed up to 1400 rpm drive 0,37 KW Iodpfx Aohg Ennoaboih first class condition

Year of construction: 1994, condition: ready for operation (used), Drilling capacity steel/cast iron: 32mm/40mm, spindle mount: MK4, throat depth: 322mm, quill stroke: 180mm, speed: 5000 rpm, table dimensions X/Y: 500mm/370mm, column diameter: 145mm, machine dimensions X/Y/Z: approx. 1000mm/1000mm/2350mm, weight: approx. 520kg. Isdpfxevgff Ts Aabeih

Condition: ready for operation (used), Drilling capacity in steel: 50mm, spindle mount: MK5, speed: 1000rpm, throat depth: 355mm, drilling stroke: 280mm, spindle-table distance: 710mm, spindle-column distance: 355mm, table dimensions X/Y: 630mm/500mm, column diameter: 160mm. Machine dimensions X/Y/Z: 1200mm/800mm/2700mm, weight: approx. 1650kg. On-site inspection is possible. Ijdpfx Aaewaa E Tsboih

Year of construction: 1987, condition: ready for operation (used), A complete Wagner WBX 1003 boring mill is available. Control: CNC Systems WB 1000, documentation is available. Iiodjttv Uaepfx Aabjh

Year of construction: 2010, condition: ready for operation (used), Drilling capacity steel/cast iron: 25mm/32mm, tapping capacity steel/cast iron: M20/M24, tool holder: MK4, spindle speed: 3500rpm, feed rate: 1050mm/min, throat range: 420mm-1320mm, cantilever travel: 900mm, column vertical travel: 430mm, quill stroke: 140mm, swivel range: 325°, table dimensions X/Y: 1200mm/600mm, drive power: 1.6kW, machine dimensions X/Y/Z: approx. 2500mm/900mm/1500mm, weight: approx. 2200kg. Documentation available. On-site inspection is possible. Iisdpfxsu N Hdaj Aabjh

Condition: ready for operation (used), Drilling capacity (steel): 100mm, max. pitch circle diameter: 7000mm, spindles: 2, spindle speed: 3000rpm, spindle mount: ISO 50, drill carriage stroke: 900mm, feed: 6m/min, power: 125kW. Machine dimensions X/Y/Z: approx. 13000mm/11000mm/5100mm, weight: approx. 18000kg. On-site inspection is possible. Iijdpevriq Rjfx Aaboh

Year of construction: 1989, condition: ready for operation (used), Two similar TOS CNC bench drilling machines (built in 1986 and 1989) with the same parameters are available. Travel X/Y/Z/W: 1200mm/1100mm/1000mm/600mm, spindle diameter: 100mm, tool holder: ISO 50, max. table load: 3000kg, table: rotary table, accuracy X/Y/Z: +/-0.02mm, control: Heidenhain TNC 135, including various angles, cutter heads, milling cutters, tool holders and other items. Documentation available. On-site inspection is possible. Individual sale possible. Iijdovyr I Ijpfx Aaboh

Year of construction: 1981, condition: ready for operation (used), Travel X/Y/Z/W: 1000mm/900mm/800mm/710mm, speed: 1400rpm, spindle diameter: 90mm, table dimensions: 1250mm/1250mm, max. table load: 3000kg, motor power: 7.5kW. X/Y dimensions: approx. 5500mm/7500mm, weight: approx. 11000kg, control: Newall DP700. Documentation available. Iedpfx Ast Hkh Aeabeih

Condition: ready for operation (used), Travel X/Y/Z: 500mm/380mm/300mm, table dimensions X/Y: 650mm/380mm, speed: 8000rpm, spindle taper: BT30, tool positions: 14, spindle power: 7.5PS, max. table load: 200kg. Dimensions X/Y/Z: approx. 1600mm/1900mm/2300mm, weight: approx. 2000kg, control: Fanuc Series 16i-M. Defects: Range switch of the tool changer and relay of the Z-axis brake. Iijdstyynmepfx Aabeh

Condition: ready for operation (used), Spindle diameter: 90mm, boring spindle longitudinal adjustment: 700mm, spindle head vertical adjustment: 1250mm, speed: 1000rpm, rapid traverse: 2600mm/min. Table swivel range: 360°, table clamping surface X/Y: 1100mm/1400mm, table cross travel: 1800mm, table longitudinal travel: 1250mm, max. table load: 4000kg, bed dimensions X/Y: 3380mm/1800mm. Machine dimensions X/Y/Z: approx. 4650mm/3900mm/3000mm. Documentation available. An on-site inspection is possible. Iodpfow N Shqsx Aabjih

Year of construction: 1988, condition: ready for operation (used), Drilling capacity: 35mm, drill spindle taper: MT4, quill stroke: 285mm, reach: 300mm-1000mm, speed: 2500rpm, arm length: 500mm, spindle-to-base plate distance: 1000mm, base plate dimensions X/Y: 1150mm/780mm. An on-site inspection is possible. Iijdpfxow Nq Suj Aabeh

Year of construction: 1969, condition: ready for operation (used), Bohrleistung: 55mm, Ausladung: 1600mm, Spindelaufnahme: MK5, Spindelhub: 400mm, Drehzahl: 1800U/min, Vorschub: 1,5mm/U, Tischdimensionen X/Y: 1500mm/800mm, Maschinendimensionen X/Y/Z: ca. 2800mm/1000mm/3000mm, Gewicht: ca. 5500kg. Eine Besichtigung vor Ort ist möglich. Iijdpjw Na E Dofx Aabeh

Condition: ready for operation (used), A small geared drilling machine Knuth is available. Drilling capacity steel: 25mm, thread cutting steel: M10-M12, spindle taper: MT3, speed: 2900rpm, quill stroke: 400mm, arm reach: 250mm, table dimensions X/Y: 270mm/300mm. Machine dimensions X/Y/Z: approx. 600mm/600mm/1200mm, weight: approx. 200kg. An on-site inspection is possible. Iiedpfx Aow Iqhasabeh

Condition: ready for operation (used), A 3-spindle deep hole drilling machine is available. 1) Deep hole drilling unit, travel X/Y/Z: 14000mm/300mm/2650mm, drilling spindles: 3, spindle distance: 325mm–375mm, motor power: 22kW, table dimensions X/Y: 6000mm/4000mm, number of tables: 2, max. workpiece weight: 50000kg/table, max. workpiece dimensions X/Y: 12000mm/4000mm, max. drilling diameter: 65mm. 2) Milling unit, travel X: 14000mm, max. milling diameter: 52mm, milling spindle power 1/2: 8.7kW/13kW. 3) Column drilling unit Soraluce TR1-1250, travel X: 14000mm, drilling diameter: 50mm. Includes heating plates, heated decoiling plates, steam plate, chip conveyor, partial NC control Mitsubishi, and various tools and clamping devices. Documentation available. An on-site inspection is possible. Iodpfjw Extyex Aabjih

Condition: ready for operation (used), Drilling diameter: 75mm, drill spindle diameter: 114mm, spindle taper: MT5, spindle stroke: 500mm, speed: 1400rpm. Clamping surface top: 750mm/1000mm, clamping surface side: 530mm/1000mm, base plate: 1000mm/1600mm, arm adjustment: 1000mm, arm swivel: 360°. Spindle centre to column distance: 600mm/1600mm, spindle centre to table distance: 800mm/1800mm. Documentation available. An on-site inspection is possible. Iijdpfxjw Extms Aabjh