Condition: excellent (used), Year of construction: 2018, functionality: fully functional, A. Ducker Robotics Robofeed II loader Kawasaki robot 200 kg. 6 axes Year 2018 B. EDF FD 618 casemaker Year 2018 Full Servo Introduction Swing no crush N. 6 fixed printing units from above N. 6 IR dryers Vacuum transport between the units Pre-creasing unit with 1:1 diameter wheels Double shaft slitter Rotary die cutter with Serrapid quick coupling Stripping transfer unit between die cutter and folder gluer ERO electronic gluer Vacuum driven folder gluer with automatic adjustment of folding swords and lateral squaring wheels Counter Ejector from above Max mechanical speed 25,000 boxes per hour Max sheet width 1,800 mm. - min. 360 mm. Max sheet length 600 mm. - min. 200 mm C. Ducker Robotics Palletizer Gjdpfx Ajwhy Abeh Heil Year 2018 with two Kawasaki robots

Condition: refurbished (used), Year of construction: 1987, functionality: fully functional, machine/vehicle number: 11BB, Fischer&Krecke Bielefeld Paper Bag Machine Three-ply Servo motor with photoelectric cell system Godoxww Rxepfx Ah Hsil

Condition: good (used), Year of construction: 2018, HEIDELBERG DIANA SMART 115 Manufacturer: HEIDELBERG Year of construction: 2018 • 2018 • Folding carton line • Longitudinal seam carton: • max. 1,150 x 600 mm • min. 75 x 55 mm Giedpfx Aoxyuapeh Hel • min. 45 x 55 mm (with small carton device) • Crash-lock bottom carton: • max. 1,150 x 600 mm • min. 146 x 80 mm • 4-point erect carton: • max. 1,150 x 680 mm • min. 120 x 110 mm • 6-point erect carton: • max. 1,150 x 630 mm • min. 250 x 130 mm • with BELKHOFF control system • Rolling and drying tunnel • TÜNKERS EAS 480 delivery station, right, 2019 • In production • Available: immediately • Location: Germany

Condition: ready for operation (used), optionally in combination with an oval riveting machine of the same brand/age; see our other advertisement Gijdox Nfhlspfx Ah Hjl

Condition: good (used), Year of construction: 1967, functionality: fully functional, Max. jumbo reel width: 1400 mm Min. jumbo reel width: 480 mm Max. jumbo reel diameter: 1600 mm Expanding chucks diameter: 150 mm and 300 mm Speed: 160 m/min Max. stacking height: 250 cm With integrated sheet counter Gijdpfxexlizfo Ah Hel Paper grammage: 100 to 600 g/m² Production format: Length x Width Min.: 450 x 480 mm Max.: 1940 x 1400 mm Upper cutting station by Dienes Werke Year of manufacture: 2007 Partial overhaul carried out in 2003 Electronics upgraded in 2004 Upper cutting unit by Dienes Werke installed in 2007 Unwinding stand overhauled in 2009 Machine can be demonstrated.

Year of construction: 2005, condition: used, Rotary die-cutter Curioni Plus 240x165 vacuum introduction 3 colors Polishing machine Castaldini year 2005 equipped with soundproof cabin Gsdpfx Ahex Hgf To Hsil

Year of construction: 2020, condition: excellent (used), functionality: fully functional, Graco Tank-Free Hotmelt Delivery System Gisdpfxswigbmj Ah Hel Invisipac HM 25 Year 2020 For delivering and dispensing hot melt adhesive pellets. For professional use only. 1200 psi (8.3 MPa, 83 bar) Maximum Working Pressure 400°F (204°C) Maximum Fluid Operating Temperature 100 psi (0.7 MPa, 7 bar) Maximum Air Inlet Pressure Proven adhesive savings, unsurpassed reliability. Unlike conventional tanks and many "tankless" systems, the InvisiPac system's patented Melt-on-Demand technology ensures a constant flow of adhesive that melts quickly and is dispensed instantly. You save adhesive and costs due to unplanned downtime for maintenance. With the InvisiPac system's robust reporting capabilities, you have the data you need to make smart decisions for your line that can increase efficiency, reduce costs, minimize downtime, and improve productivity. Better performance: No clogged nozzles; No carbon-filled containers; Fast startup in as little as 10 minutes; Improved operator safety; High performance with a sustainable component; Greater cost savings; Consistent adhesive viscosity; No material damage; Little to no waste; Better dispensing control; Use the adhesive of your choice

Condition: excellent (used), functionality: fully functional, Year of construction: 1999, working width: 1,600 mm, M&M Mediterranea de Maquinaria, Pizza box machine Rotary cutter line M&M WRC 98 1150-1600mm Giedpfsru Hl Iex Ah Hjl Fustellatore rotativo M&M MODE WRC 98 1150-1600mm The box production process is as follows: -Ready-made cardboard formats are inserted into the machine, the machine prints up to 3 colors, cuts the box and sends it on with a tape and stacks it. -The machine makes about 50,000 boxes in one shift. -The largest dimensions of cardboard that can go into the machine are 1150*1600. -The machine has about 15 to 20 tools for different sizes of pizza boxes. -New electronics are in the machine Video of machine in production available on demand.

Year of construction: 2014, condition: used, Technical data: Material: PET aluminium-metallized film Material thickness: 9–50 μm Web width: 500–2000 mm Roll width: 2100 mm Web diameter (unwind): max. φ1150 mm Web weight (unwind): max. 1500 kg Product winding diameter: • φ600 mm (3” friction shaft) • φ750 mm (6” air shaft) Winding shaft load: max. 500 kg/shaft (center-supported) Core dimensions: • Web core: 3” (φ76.2–76.5 mm), 6” (φ152.4–153 mm) • Product core width: 100–1050 mm Slit width: 200–1950 mm (up to 5 slits) Machine speed: max. 400 m/min Typical operating speed: 200–250 m/min Unwinding tension: • 50–500 N (φ650 mm or less) • max. 270 N (φ1000 mm) Winding tension: • φ200 mm: 50–300 N/m • φ400 mm: 50–170 N/m • φ700 mm: 50–100 N/m Mechanical specifications: 1. Unwinding Section • Shaftless single-axis fixed unwind • Direction: upward or downward • Automatic tension control with feedback sensor • Dancer roller included • Core clamping: rotary mechanical chuck • Core sizes: 3” standard, 6” with adapter • Web guide: manual ±5 mm, automatic ±100 mm 2. Main Drive Rollers • Multiple rollers with specified diameters and surface finishes • Nip and contact rollers with pneumatic pressure adjustment 3. Slitting Mechanism • Upper/lower NC shear cutters • Number of blade units: 6 upper + 6 lower • Slit width adjustment via touch panel • Precision: ±0.1–0.2 mm • Dust extraction: upper blade nozzles + lower blade suction • Optional razor cutter (manual adjustment) 4. Mini Winder Location: below slitter Units: 2 (left / right) Drive: AC servo motor Tension: dancer roller control Traverse width: 300 mm Winding diameter: φ500 mm 5. Winding Section • Duplex center drive • 3” air friction shaft + 6” air shaft • Automatic tension control linked to winding diameter • Contact roller with pressure adjustment Godpfxsx Ez Ums Ah Hoil • Core positioning via collar bar 6. Product Discharge • Hydraulic lift tray • Motorized slide-out with tilting function Electrical & control: Line drive motor: 7.5 kW AC servo Winding drive motor: 11 kW AC induction Unwinding drive motor: 11 kW AC servo Static eliminators: 5 units (Keyence SJ-HA) Control panels: main panel, winding panel, unwinding panel, mini winder panel, auxiliary panel PLC: Fuji Electric Utilities, dimensions & environment: Power supply: AC 200 V, 60 Hz, 3-phase Power consumption: 70 kVA Air supply: 0.5 MPa, 500 L/min (dry air) Machine weight: approx. 12 tons Paint color: urethane coating (E-31872) Installation environment: cleanroom Class 10,000 Required floor load capacity: ≥ 2 ton/m² Documentation: 2 operating manuals Spare parts: • Drive belts (4 types for line drive) • Winding drive belt (1 type) • Unwinding drive belt (1 type) • Standard tool set

Condition: ready for operation (used), In use from 1991 until it was last used and has been little prone to problems despite being a 1990s Chinese punching and riveting machine for oval eyelets. Gsdpfex Nd U Djx Ah Heil

Condition: good (used), Year of construction: 2023, Casemaker DE Pack QYKM-1400x2900 4-color flexo printer with ceramic anilox and doctor blade system Year: 2023 Max. size: 1400x2600 mm Giedpexw Nmrsfx Ah Hsl Skip feeding area: 2180x4000 mm Min. size: 350x750 mm Max. speed: 200 pcs/min Rotary die cutting Vibration Stacker

Year of construction: 2018, condition: used, Automatic and Compact Giedpfx Ahox E Awio Hjl

Condition: excellent (used), Year of construction: 2022, operating hours: 2,000 h, functionality: fully functional, DINCER 90 3 Point Folder Gluer to sale. The machine looks like a new very well maintained. Only 14 million boxes produced. Machine is capable to produce straight line boxes and crash lock bottom boxes. Machine is upgredable to 4 point boxes as well. Gisdpfxjxywxzj Ah Hsl The gluing and qulity controll not included. But we can offer for this different solutions.

Condition: good (used), functionality: fully functional, Holweg RS2 flat & satchel paper bag machine with 2 colour in line flexo print Bag width: 70-380mm Gijdpfxsru Hfte Ah Hsl Bag lenght: 160-680mm Machine can make paper bags with window. Video of machine in operation available if required. Also available: - Holweg RS2 with 3 colours, - Windmöller & Hölscher Matador 50, - Fischer & Krecke Maxima 26.

Condition: used, Year of construction: 1996, Technical Data: Working width: 1200 mm Materials: BOPP, OPP, CPP, PET, OPA Parent roll diameter: 800 mm Final roll diameter: 600 mm Maximum speed: 300 m/min Web guiding system: Yes Knife type: Razor & rotary blades Gsdpfxex Ezwze Ah Hjil Trim exhauster: Included

Condition: good (used), Iijima’s excellent, fast-running JF-1030, year of manufacture 1991, modified to Bobst stripping tooling Machine number: 8061 Year of manufacture: 1991 Stripping station made compatible for/with Bobst stripping pins and mounting rails Sector segment now driven by a dual set of cam gears instead of the previous triple system, resulting in smoother and vibration-free improved carriage operation. Chains replaced in May 2023 Gripper carriages have been repaired where needed but not replaced; current register tolerance at the front lay with rigid board types is < 0.15mm Electromagnetic clutch (24 VDC, Warner) replaced in May 2023, as well as all roller bearings on this shaft, including those in the casing just before and after the worm gear. Oil seals replaced Oil casings flushed and thoroughly cleaned for conversion from mineral to fully-synthetic oil. Absolutely no foaming, quieter operation. Dismantling as of 23/12/2025; then available for sale ex-warehouse Van Rooij For the end user: can be supplied including installation, transport, and warranty. Other specs according to manufacturer’s brochure; Technical Specifications – Flatbed Die Cutting Machine Materials - Paper from 80 g/m² - Solid fibre board / cardboard up to 2000 g/m² - Corrugated board up to 4 mm, depending on material quality and cutting layout Sheet Sizes & Formats - Maximum sheet size: 750 × 1050 mm - Minimum sheet size: 350 × 400 mm - Maximum cutting form size: 745 × 1070 mm - Maximum cutting surface: 730 × 1030 mm - Inside chase dimension: 750 × 1050 mm Performance - Maximum cutting pressure: with maximum sheet size - Maximum speed: up to 5,000 sheets/hour - Gripper margin: adjustable - Standard rule height: 8 – 12 mm Pile Data Feeder pile: - Height (incl. pallet): 1,200 mm - Weight (incl. pallet): 1,000 kg Delivery pile: - Height (incl. pallet): 1,080 mm - Weight (incl. pallet): 1,000 kg Auxiliary piles: - Feeder auxiliary pile height: 450 mm Giedpox Ndu Djfx Ah Hsl - Feeder auxiliary pile weight: 450 kg - Delivery auxiliary pile height: 800 mm - Delivery auxiliary pile weight: 800 kg Machine Dimensions & Weight - Length without feeder: 4,540 mm - Length with feeder: 5,810 mm - Width: 2,350 mm - Height: 2,100 mm - Machine weight: 15,000 kg - Feeder weight: 1,000 kg Electrical & Air Requirements - Power supply: 3-phase AC - Main motor output: 15 kW - Machine connected load: 32.4 kVA - Required compressed air: 6 bar - Air intake volume: approx. 30–50 l/min Additional Information - Heavy-duty industrial construction - Designed for continuous professional die-cutting production - Specifications subject to alteration

Condition: used, Year of construction: 2020, Two-sheet gluing machine for large format box production Gisdsx Rc Sdspfx Ah Hol

Condition: used, Year of construction: 1997, Vacuum feeder n°3 colors Automatic Slotter Gedpjx E Aqpofx Ah Heil Rotary Die Cutter with Serra Rapid system Folder Gluer with Counter Ejector Boundle strapper Emmepi year 2006 mod pc 1450

Condition: new, Year of construction: 2025, Stock Offer GC1 / GC2 Cartonboard Stock Available – Mixed Formats, Ready to Ship Sheets & Reels Immediate Availability, Folding Boxboard Various Sizes & GSM We are offering immediately available cartonboard stock (GC1 / GC2) in sheet and reel formats, suitable for folding cartons, packaging, sleeves, and general converting. The lots include top quality and downgraded/remarked material (e.g., water spots, creases, coating variations, uncoated edges, damaged pallets), enabling significant cost savings depending on your end-use and print requirements. Grades: GC2 (Cream back) + GC1 (White back / Optimus Top) Gsdpfx Aex H Tm Doh Hoil Products include: Excellent Top, Excellent Top Strong, Excellent Top Pure, Freeze Grease III, Optimus Top, etc. Formats: Sheets + selected reels Grammage range: approx. 215 – 450 gsm Sizes: Multiple sheet sizes and widths (mm) as per the attached stock list Quantities: Listed per lot in kg (many lots available, including high-volume lots) Typical Applications Folding cartons (food / pharma / cosmetics – depending on defect tolerance) Packaging sleeves and inserts POS / display packaging General boxboard converting and lamination

Condition: new, Year of construction: 2024, Automated machine for E-commerce paper bag production – Bag Master High-performance machine designed for manufacturing durable E-commerce bags used for packaging and online deliveries. Works with paper rolls up to 1400 mm in width and 1250 mm in diameter, ensuring flexibility in producing various sizes (width: 80–510 mm, length: 180–660 mm, gusset: 12–140 mm). The equipment achieves a capacity of 200 bags per minute, with precise adjustments via servomotors and full control through a PLC with a color touchscreen. Optionally, it integrates 4-color flexographic printing for customising bags with logos or graphics. Gsdpfx Ahsxg D Ngo Heil Equipped with automatic braking system, gluing and stacking units, and precision guiding mechanisms, the Bag Master delivers high productivity and consistent quality, making it the ideal solution for packaging manufacturers serving the e-commerce sector.

Condition: good (used), Year of construction: 2018, functionality: fully functional, Coated web width 1315 mm Max. web width 1330 mm Max Core width with expanding chucks 1300 mm Max Core width with Standard cones. 1340 mm Minimum web width 650 mm Unwinder reel diameter 1000 mm Rewinder reel diameter. 1000 mm Core size - unwinder: 3”= 76 mm & 6”= 152 mm - rewinder 6”= 152 mm Max. web tension - unwinder 40 kg (400 N) - rewinder 55 kg (550 N) Taper tension on rewinder up to 60% of the set value. Min. web tension - unwinder: 2 kg (20 N) - rewinder: 4 kg (40 N) Max reel weight: 1.000 kg Max mechanical speed: 450 m/min COATED WEB BOPP 12 - 80 μ PETP 10 - 30 μ LDPE, LLDPE 30 - 200 μ OPA 12 - 18 μ NYLON CAST 30 - 80 μ ALU (Foil) 6,3 - 40 μ PP CAST 60 - 150 μ PAPER 40 - 150 gr/m2 LAMINATED WEB BOPP 12 - 80 μ Godpfxeu Upupo Ah Hsil PETP 8 - 30 μ LDPE, LLDPE 20 - 200 μ OPA 12 - 18 μ NYLON CAST 20 - 80 μ ALU (Foil) 6,3 - 40 μ PP CAST 20 - 150 μ COEX FILM 25 - 200 μ PAPER 40 - 150 gr/m2

Condition: reconditioned (used), Year of construction: 1968, functionality: fully functional, machine/vehicle number: 7923278, type of input current: three-phase, overall weight: 8,200 kg, total height: 2,130 mm, total length: 3,320 mm, total width: 2,440 mm, space requirement width: 2,440 mm, input current: 30 A, input frequency: 50 Hz, nominal power: 7.5 kW (10.20 HP), rotational speed (max.): 4,600 rpm, rotational speed (min.): 1,500 rpm, 72x102 cm die cutter for thin paper and light carton up to 600 gsm. Exceptionally stable and very silent fast cylinder press. Floor anchoring is not necessary. Gjdsx Hzm Sjpfx Ah Hsil

Year of construction: 2001, condition: excellent (used), Material width: max. 800 mm Material thickness: PET, OPP, aluminium and composite materials 12 – 200 µm Mechanical speed: 0 to 300 m/min. Maximum winding diameter: 500 mm Gsdpsx Ha N Eofx Ah Hsil Maximum parent roll diameter: 800 mm Supply voltage: 3 x 400 V 50 Hz Accessories Edge control Unwinding shafts 70 / 76 Extraction system included

Condition: excellent (used), Year of construction: 2021, functionality: fully functional, LUKES SC-2400S Gsdsxy H Edjpfx Ah Hjil Folding and gluing machine with automatic feeder, sheet alignment system, and strapping. Designed for up to 6-point gluing. Semi-automatic machine setup. The machine's main structure features independent servo motors. Equipped with both hot and cold glue systems. Belt speed is adjustable. The machine also includes an automatic box alignment system, feeder vacuum, and remote control. Comes with comprehensive tooling. Technical data: - Board type: E/B/C/A flute, 3-ply, 5-ply corrugated board - Paper feeding: precise, automatic, and continuous - Maximum gluing speed: 120 m/min - Box production width: 900 - 2400 mm - Machine dimensions (L x W x H, m): 16 × 3.5 × 2.1 / 26.5 x 4 x 2.2 (with counting and strapping line) - Gross weight: 13 t / 16 t (with counting and strapping line) - Power consumption (approx.): 30 kW / 40 kW (with counting and strapping line) The machine is available for demonstration at our site: Skawina 32-050. Please feel free to contact us For more information and to discuss terms, please get in touch. To simplify communication, especially via WhatsApp, kindly include the reference number in your response.

Year of construction: 2024, operating hours: 100 h, condition: like new (used), functionality: fully functional, machine/vehicle number: ZH-500, Folding and gluing machine for folding and gluing cardboard. Minimum size 3 cm, maximum 30 cm. Includes spare wear parts. The machine is as good as new and can be seen in operation in Enschede. Gijdpfx Ahox Hfh Hj Hel