Condition: good (used), Year of construction: 1991, Very good condition. Fully overhauled in 2023. Flat handle unit installed. The machine offers both 1-ply and 2-ply operation modes. It is equipped with slit equipment for the bag bottom formation. Nsdpfx Abjxfl Izebowp Bag width (without handle): min. 160 mm – max. 320 mm Bag width (with handle): min. 250 mm (between handle centers) – max. 320 mm Bag gusset (without handle): min. 60 mm – max. 180 mm Bag gusset (with handle): min. 250 mm (between handle centers) – max. 180 mm Bag cutting length (without handle): min. 350 mm – max. 610 mm Bag cutting length (with handle): min. 350 mm – max. 580 mm Roll width: min. 460 mm – max. 1020 mm Maximum roll diameter: outer layer – 1500 mm / inner layer – 1300 mm Core diameter (paper roll): 76 mm Paper grammage: 1 ply – 50-120 gsm / 2 ply – up to 100 + 80 gsm (as produced) Number of forming plates (for bag width): 7 Forming plate sizes: 160, 180, 240, 260, 280, 300, 320 mm Gear sizes (for cutting length): 35, 36, 41, 45, 48, 50, 55, 56, 57, 58, 62 Approximate production speed with handle: 100 pcs/min Approximate production speed without handle (1 ply): 150 pcs/min Approximate production speed without handle (2 ply): 120 pcs/min Total electrical load: 25 kW Paper roll loading mechanism: automatic for outer layer, by forklift for inner layer Machine dimensions (W x L x H): 4.5 m x 13 m x 3.3 m

Condition: good (used), Year of construction: 1979, TOSI VERONA Max. size: 1200x1800 mm Min. size: 400x400 mm In production Location: Germany Nwsdpfxexdu Nrj Abbop

Condition: used, Technical data paper roll cutting machine. This machine can only be used for small residual rolls up to a maximum diameter of 400 mm in order to automatically unwind these residual rolls and cut the paper into strips so that it can be better pressed into bales. Manufacturer unknown Type unknown Nwedpfxou Tg Spj Abbsp Year of manufacture unknown Dimensions feed table for rolls: Width inside of rolls 2.195 mm Height inside of castors 465 mm Transport dimensions Feed table over all: 2,650 x 1,300 x 2,150 mm (W x H x D) Dimensions roller cutter: Width cutting shaft inside 2.250 mm Transport dimensions of the roll slitter over all: 3,050 x 1,550 x 550 mm (W x H x D) Remarks: There are no further data or documents available. A viewing is possible by appointment. We assume no liability for the technical data and possible errors.

Condition: like new (used), Year of construction: 2021, operating hours: 250 h, functionality: fully functional, Formwork production line capacity 4000 - 5000 pcs/h Nsdpovdkzzefx Abbswp

Condition: excellent (used), Year of construction: 2024, 158 USED BCS 740 single-axle tractor. Manufactured in 2024 - machine under warranty. Warranty: 2 years. EQUIPMENT: - flail mower - operator's trolley Nwjdpfxsxgqrbj Abbjp - engine housing - hour meter - quick coupler - aluminum ramps

Condition: good (used), Year of construction: 2009, functionality: fully functional, working width: 2,800 mm, type of input current: three-phase, total width: 5,430 mm, total length: 15,000 mm, input voltage: 400 V, DY Inliner (Korea) Working width 2800 x 1250 mm 2 inking units Slotter rotary die cutter Folding unit counter, stacker, ejector. The machine is in good condition, fully functional and can be inspected in production. Available from 09.2025 Nwjdpeu Szyxjfx Abbsp

Condition: refurbished (used), Year of construction: 2012, LYISH Rewinder for Toilet paper and Hand towel rolls, and NON-woven rolls. Standard pyramid pattern for max volume. Rolls are perforated to length of 115mm (other sizes can be adjusted) Rolls length setting on PLC screen. The rolls are sealed with glue line and tail cutting. Also optional - coreless rolls production on Stainless steel mandrel Specifications: - Rewinding speed (max.) 350 m/min - Paper width – 2.75 m (Max) - Parent reel dia. – 1.25 m (Max) - Product dia. 350 mm (max.) - Pneumatic lifting arms for jumbo roll - Paper grade 17-70 g.s.m. single or double ply - Perforation – standard system includes 4 rotating blades, distances between perforation lines changes by changing gears. - Embossing – steel to rubber, standard pyramid pattern (special pattern – optional). -Core guiding system for logs – preventing conic edges during rewinding of large diam rolls - Finishing station including glue injection, cutting and turning the rolls for adhesion forming a tail seal. Njdpfjd Skg Rjx Abbewp - Automatic ejection of finished rolls sideways out of the machine. - Machine is supplied as standard together with two 75 mm dia. mechanical shafts for the jumbo roll. - Power – 18 kw - Weight – 6500 kg The machine was refurbished by the producer - LYISH , and will be supplied with guarantee for 12 months. On line Slitting system (Slitter-Rewinder) - optional, can be added if required. Edge embossing system - optional (can be added if required) Full CE safety covers - optional (can be added if required)

Condition: ready for operation (used), Year of construction: 1982, operating hours: 40,000 h, functionality: fully functional, machine/vehicle number: 1986, cutting width (max.): 1,900 mm, cutting length (max.): 1,900 mm, stack height: 1,900 mm, type of input current: AC, front table length: 14,000 mm, total width: 5,500 mm, total height: 3,200 mm, input voltage: 380 V, compressed air connection: 6 bar, Maker: Valmet-Strecker Nwsdowpp Szopfx Abbjp Year: 1982 Max knife load 600gsm ( Min 40 gsm ) Max working width 1900 mm Min sheet size (w x i) 320 x 420mm Max sheet size (w x l) 1900x1900mm Unwind stands one, double type Max unwind reel diam. 1500 mm Core size 3”, 6”, 10” and 12” Max pallet hight 1900mm Max speed 200m/min Spare parts and tools Machine overall dimensions: length 14 m, width 45.5 m in delivery exit working condition Machine modifided many time last years

Condition: used, Year of construction: 1969, functionality: fully functional, Die-cutting platen, format 117 cm x 83 cm, with manual feed. The machine can be tested on site. Nedpfx Ajxn Rldsbbswp

Condition: ready for operation (used), Year of construction: 1986, functionality: fully functional, Speed: 100 bags/min Tube length: 270-630 mm Bag length: 220-560 mm Bag width: 110-250 mm Bottom width: 60-160 mm Number of ply: 2 Photocell for preprinted reels Printing section: 2 colors inline (new anilox and rubber rollers) Bottom patch unit Nwodpfxoxcy H Hs Abbep

Condition: used, Year of construction: 1973, The Bobst SP 1120-E is a punching machine equipped with a stripping unit, designed for efficient and precise punching operations. Manufactured by Bobst in 1973, this model is located in Germany, with pricing available upon request. It features a format of 780 x 1120 mm and can handle sheet sizes ranging from a maximum of 800 x 1120 mm to a minimum of 380 x 450 cm. The machine boasts a running speed of up to 6,000 sheets per hour and a cutting force of up to 300 tons. Additional features include a platform, pallet feeding with a non-stop device, sheet feeding (OS) with double sheet detection, and a centerline. Format: 780x1120 mm Equipment: Die Cutting Machine with Stripping Unit Running speed: Max. 6000 Sheets/Hour Cutting force up to: 300 Tons Platform Pallet Feeder with Non-Stop device Pull guide (OS) with Double Sheet Detector Centerline Refurbished 1980 Feeder with pre-pile device Continuous feed and delivery Nwsdpfx Ajv A R I Sebbjp 2 cutting chase Solid board: 0.060 Zoll (1.5 mm) Paper: from 0.005 Zoll (90 grams/sq. meter) Max. sheet 44 Zoll x 31 1/2 Zoll (1120 mm x 800 mm) Min. sheet 17 3/4 Zoll x 15 Zoll (450 mm x 380 mm) Corrugated 0.160 Zoll (4 mm)

Condition: like new (used), Year of construction: 2015, Reel width: 2000 mm Slitting width 300 – 1700 mm Nwodpfxjwvv Hfj Abbsp Max unwind diameter: 800 mm Max. rewind diameter: 600 mm Slitting method: Razor Rewind shafts: Dual rewinding shafts Max mechanical speed: 400 m/min AC Servo motor with tension control Web guiding Material types BOPP, PET, PE, laminated film, foil, paper

Condition: new, Year of construction: 2025, Cardboard Core winder maschine for Toilet Tissue paper rolls Specifications • Carton web width 60 - 76 mm • Production speed 35 - 40 m / min • Core i. diameter 40 mm - 80mm Njdjit N Rvopfx Abbswp • No. of plies 2 , 3, 4 plies. (more optional) • Cut off length 600-2900 mm Features • Operation with either hot or cold glue. • Exchangeable mandrels. (for different core size) • Crush cutting by two or three circular cutters with synchronized movement. • Variable speed – electronic. (three phase)

Year of construction: 2015, condition: good (used), We are selling 3 used paper pulp thermoforming machines in good condition and additional equipment. Model TPM-1500, manufactured by "Taiwan Pulp Molding" - one of the world's leading companies in this area. Thermoforming Line Description: 3 stage production (forming + drying 30t + hot pressing 50t). 480 v, 60 Hz; Manufacture date - Oct. 2015. Effective Molding Area, mm - 1500 x 900 x 120; Overall dimensions, mm - 7600 x 2250 x 3700; Weight - 16 tonnes; Production speed - up to 80 kg/h; The necessary quantity of operators - 1; Press pressure (critical for quality and performance) - 40t (1st) / 50t (2nd); Movement mechanism - Servo drive + ball screw, encoder positioning, accuracy +/- 0.01 mm for the drive, 0.05 mm for the mechanics; Automated sprinkles for quality improvement - For molds: adjustable time interval (15-20 bar). For products: automatic (2-3 bar); Safety - emergency stop button, optical sensors, zone security fences. Installed power - Up to 400 kW, depending on the type of product and quantity of heating elements. Features: 1. Completely dry-in-the-mold pulp product. 2. No distortion or variation in shape & size. 3. Smooth surface, highest quality finish in the industry. 4. Maximum mold utilization. 5. Suitable for various product's wall thicknesses. Nwjdpfonab Evox Abbsp Suitable for the production of the following products: High-finish molded paper packaging; Single-use paper dishware; Single-use paper Cup lids; Paper Cup holders; Paper egg cartons; etc. Each Thermoformer set includes: Taiwan Pulp Molding Auto Stacker - TPM-AS-1500 0.5 HP, Two-Stage Auto Stacker 480 v, 60 Hz, Belt Width: 1500 mm; Cutes Water-ring Vacuum Pump (2017) - Cutes NN-1001FCD vacuum pump, 75 HP, 880 RPM, 1,000 CFM. Price per 1 Set: Thermoforming machine 300 000 euro + Autostacker 20 000 euro + Cutes water-ring vacuum pump 5 000 euros = 325 000 euros per set. If purchase few sets discount can be discussed. The last set includes a pulp preparation system and costs + 50 000 euros: 1. Taiwan Pulp Molding Co. Hydropulper w/Auto Feeding Conveyor (2017) - stainless steel hydropulper w/ 100 HP motor, 90" x 80" tall, w/ 47" x 44" x 31" dump hopper, including auto feeding conveyor; 2. BTG Instruments Consistency Control Unit - MnCPM-1300 type HX/Q0/C2/5/10 consistency transmitter unit; 3. Conical Refiner 75 HP; 4. Taiwan Pulp Molding Co. Cleaner Screen (2017) - 30 HP;

Condition: used, Year of construction: 2012, High-speed polyethylene extrusion line, used for single-side polyethylene coating on paper cups and other paper containers. This is an industrial extrusion coating line designed for laminating polyethylene onto paper substrates. The machine produces PE-laminated paper, commonly used in the manufacturing of food packaging (paper cups, trays, boxes, etc.). It is a specialized piece of equipment for the paper packaging industry, providing barrier properties against liquids and grease. Main technical specifications Melt slot length: 1200 mm Finished product width: 500–1150 mm Nedpjxdimfefx Abbswp Operating speed: 100–150 m/min Extruded film thickness: 0.01–0.08 mm Maximum roll diameter: 1200 mm Maximum extrusion capacity: 120 kg/h Installed power: 97 kW Dimensions: 7500 × 7800 × 3200 mm Weight: 14 tons

Condition: ready for operation (used), Year of construction: 1986, functionality: fully functional, working width: 1,420 mm, Year: 1986 Width/mm: 1420 Thickness/µm: 14-400 Material: PO, PE, paper, HDPE, LDPE Detail: Plant consists of: 2x Fife edge trim control 2x Ahlbrand MFD 2000 pre-treatment units (year 2001) 1x Print Concept UV unit type PC 2w-1600-2x1 (year 2001) Coating unit with individually temperature-controlled rollers. Nwsdexcy Hyjpfx Abbsp Sleeve system D: 76mm. Several spare parts included.

Condition: ready for operation (used), Year of construction: 1977, functionality: fully functional, ERBA TITAN Njdpfsxn T Hwox Abbjwp 100 x 160 cm year 1977, overhauled in 2007 with all standard accessories

Year of construction: 2012, condition: used, Web width: 520 mm Voltage: 400 V + IV + PE Current: 20A Control voltage: 24 V DC Nwsdpfxsxl Truj Abbop Air pressure: 6 bar

Condition: new, Year of construction: 2023, functionality: fully functional, machine/vehicle number: 12-23, A fully automatic cutting machine for Tissue paper rolls. High precision servo control system - "Control Techniques" Cutting large rolls Diam. up to 280mm - in single channel. Cutting rolls in two channels - up to max. Dia. of 140mm Automatic lubricant spraying system and air cooling for the blade. The machine complies with CE Safety standards. Specifications: - Product cutting dia.(Max)– 280 mm - Cutting speed Max – 160 cuts/min (x 2 lines = 320 Toilet rolls/min) - Computerized controlled functions: * Product and trim length * Cutting speed * Sharpening frequency and advance * Blade lubrication frequency * Fault display * Counter (coded) * Inlet conveyor and hoper transferring logs automatically from the ewinder into the cutting channel. * Choice of program according to the various products. - Clamps – machine is supplied together with 4 rigid pneumatically operated clamps, according to customers products dia. Nwsdpfxoup U Ras Abbsp - Blade dia. – 600 - 800 mm - Electric supply – 12 kw x 380 v - Air pressure – 1/4 hose 6 atm - Dimensions – 6.5 x 2,2 x 2.4 m - Weight – 3500 kg

Condition: new, Year of construction: 2025, functionality: fully functional, cutting width (max.): 1,600 mm, insertion height: 50 mm, cutting length (max.): 2,500 mm, input current: 30 A, input voltage: 400 V, Equipment: documentation/manual, Akonda.pl - Your Official iEcho Partner. We offer the highly versatile and powerful iEcho TK4S, the ultimate solution for automated cutting across multiple industries. Its modular design allows for perfect customization to meet your specific production needs, from sign & display and printing to packaging, textile, and industrial manufacturing. Nwedpfx Aexfrh Uebbjp The iEcho TK4S is engineered for precision, speed, and reliability. Its robust construction and advanced features ensure high-quality results on a vast range of materials. As an official iEcho service partner, Akonda.pl provides comprehensive support, including professional installation, operator training, and ongoing technical service to keep your operations running smoothly. Key Features of the iEcho TK4S: Modular Tool Head: Can be equipped with up to three tool modules simultaneously, allowing for complex jobs without stopping. A wide range of tools is available: - Electric Oscillating Tool (EOT): Perfect for cutting soft and medium-density materials. - Pneumatic Oscillating Tool (POT): An air-driven tool with an 8mm stroke for cutting hard, dense materials up to 110mm thick. - Universal Cutting Tool (UCT): For high-speed through-cutting of materials up to 5mm. - Creasing Tool (CTT): Delivers perfect creases on cardboard and corrugated materials. - High-Speed Router (RZ): With a speed of up to 60,000 RPM, it can mill and engrave hard materials like acrylic and PVC. High Performance: Maximum cutting speed of 1500 mm/s and an accuracy of ±0.1mm. Durable Construction: Built with a lightweight and strong aviation aluminum frame. Automation Ready: Can be equipped with automatic feeding and collecting systems for 24/7 production. Intelligent Camera System: Ensures precise positioning and accurate contour cutting for printed jobs. Available from Stock & Full Service Support! At Akonda.pl, we understand the importance of fast delivery and reliable support. IN STOCK NOW: We have a permanent stock of iEcho TK4S machines in the popular 2500 x 1600 mm size, ready for immediate delivery. OTHER SIZES AVAILABLE: Looking for a different dimension? Contact us to inquire about other available sizes and custom configurations. We can supply the full range of iEcho models. PROFESSIONAL SERVICE: Our team of factory-trained technicians provides expert installation, training, and warranty/post-warranty service across Europe. Why Choose Akonda.pl? Authorized iEcho Service Partner: We are your direct link to professional support and genuine spare parts. Largest iEcho Warehouse in Europe: Minimizing lead times and ensuring you get your machine faster. Proven Expertise: We have extensive experience in implementing cutting solutions for a wide variety of industrial applications. Contact us today to receive a customized offer, schedule a demonstration, or discuss how the iEcho TK4S can revolutionize your production.

Condition: good (used), Year of construction: 2003, functionality: fully functional, machine/vehicle number: 7555605, Max size: 60 x 41 cm, integrated feeder SE - 18.2, cross-web paper cutter ST - 18.2, die cutting unit D - 18, strapping/banding unit PB - 18.1, horizontal and vertical strapping. Paper width min. 35 x 45 mm, paper width max. 405 x 600 mm. Stacking height min. 30 mm, stacking height max. 100 mm. Machine no.: 7555605 Njdpfxsxc Uv Ao Abbjwp

Condition: excellent (used), Offer consisting of: Polar 78N eco, year of manufacture 2016, incl. side air tables (75x75cm and 50x50cm), immediately available. Nwedpfxew Am Dhe Abbsp

Condition: good (used), Drossert ST 3B Cauhe Die cutting machine The machine is fully operational, ready for production. Nodpfsu Umcqox Abbewp Weight 3500kg Power supply 380V Production under the Drossert Maschinenbau GMBH Germany brand by the Cauhe factory in Spain. Equipment: – pneumatic clutch and brake – console – 3 operating modes: single, continuous, with time delay on opening – central lubrication – additional safety covers – hard sheet metal for pressure

Year of construction: 1972, condition: used, Sheet Paper Cutting Machine – Strachan & Henshaw (UK) High-quality industrial machine, manufactured in the United Kingdom, designed for cutting paper rolls into sheets with precise dimensions. Its robust construction and proven reliability make this machine a practical solution for print shops, packaging factories, and other applications in the paper industry. 🔹 Main features: Nsdpfx Ajxcxpgobbowp Automatic cutting of paper rolls into sheets; High dimensional accuracy; Operating speed suitable for industrial production; Solid construction, suited for intensive use; Easy maintenance and low operating costs. This 1972 Strachan & Henshaw machine is still operational and represents a reliable and economical choice for producers seeking a durable and efficient unit.

Condition: used, Year of construction: 1975, functionality: fully functional, Paper Cutting and Rewinding Machine – Goebel Nwsdpfxoxcxlue Abbjp Robust industrial equipment, manufactured in Germany, specifically designed for slitting and rewinding paper rolls. Delivers high precision in processing large reels and is ideal for preparing material for printing houses, packaging production, and other applications in the paper industry. Its solid construction and proven reliability ensure successful operation even after decades of use.