Used plasma cutting machines for sale (136)

Condition: used, Year of construction: 2005, CNC portal plasma cutting machine Manufacturer: Messer Type: Omnimat L8000 Year of manufacture: 2005 CNC control: Global Control Plus Track gauge: 8,000 mm Equipment: 1 x oxy-fuel bevel cutting unit DAF/L for weld preparation (bevels) 1 x skew rotator with Kjellberg FineFocus 800 power source 3 x oxy-fuel torches ALFA 1 x marking unit FineMarker Without table, filter, and rail ä3626 Itsdpfx Acjykruaoroh

Condition: used, Year of construction: 2006, CNC gantry plasma cutting machine Manufacturer: Messer Type: Multitherm 4000 Year of manufacture: 2006 CNC control: Global Control Working area: 3 x 12 m Track gauge: 4,000 mm Track length: 15 m Extraction table Itsdpfx Acoykpd Ejreh 1 x plasma torch with Hypertherm HPR260 1 x plasma torch with Skew Rotator Delta and Hypertherm HPR260 Without filter system ä3626

Condition: used, Year of construction: 2023, CNC plasma cutting machine Manufacturer: Messer Cutting Systems Type: MetalMaster 2.0 6025 Year of manufacture: 2023 CNC control: Global Control 2.0 Working area: 2,500 x 6,000 mm 1 x plasma torch with Kjellberg HiFocus 280i neo power source Automatic gas console Itsdpoyhd Rbjfx Acroh Filter system Donaldson DFPRO 6 Cyclopeel Cutting software Omniwin Standard Availability: immediate ä3626

Condition: used, Year of construction: 2019, CNC Portal Plasma Cutting Machine Manufacturer: Microstep Type: MG 4501.20 BkP Year of manufacture: 2019 CNC control Itedpfxoyay H Ao Acrjh Working area: 2,000 x 4,500 mm 1 x 2D plasma torch with Hypertherm XPR300 power source, including Optimix gas console 1 x Drilling spindle 26 kW, up to 40 mm diameter, including 8-position tool changer 1 x Preparation for retrofitting a rotator (for bevel cuts) 1 x Nesting program on the CNC control ä3626 Availability: May 2026

Condition: good (used), Year of construction: 2008, CNC Portal Plasma Cutting Machine Ijdpfsiff Dasx Acroth Manufacturer: Messer Type: Multitherm 4000 CNC Control: Global Control Plus Year of Construction: 2008 Retrofit: 2019 Extraction table: 2,000 x 3,000 mm 1 Oxy-fuel torch ALFA 1 Plasma torch Power source: Kjellberg HiFocus 280i Filter system: Z-Line 9 ZDC Our own technicians are available for installation, commissioning, and training! All spare parts are in stock. 3626ä

Condition: good (used), Year of construction: 2011, CNC Portal Cutting Machine Manufacturer: Microstep Type: MasterCut-AM 9001.20 Year of manufacture: 2011 CNC control: iMSNC with integrated network card Working area: 2,000 x 9,000 mm Extraction table 1 oxy-fuel burner Cutting thickness up to 150 mm 1 plasma marking unit Kjellberg Laser pointer Technical data in detail: 1x oxy-fuel burner (1 x fully automatic) 1x plasma marking unit (fully automatic) Kjellberg Finsterwalde MicroStep® CNC machine control iMSNC with integrated network card LCD operator panels on the portal Laser pointer with automatic offset transfer Parameter database iMSNC control / Windows® Programming system "AsperWin-Basic" for programming directly on the machine control Module macro library "AsperWin Select" Module NC simulator "AsperWin NC-Sim" Module "Plasma Marking" (for peening) via plasma source Module "THC" / Automatic height control via arc voltage USB 2.0 connection for storage media Module remote diagnostics MicroStep® "iFDS Win" Remote maintenance access via TeamViewer Central gas control via proportional valves Parameter database for 1 burner Power cables Gas hoses for preheating oxygen, cutting oxygen Acetylene machine cutting torch RHÖNA-Acetylene FIT+ 1 capacitive height control IHT / for oxy-fuel 1 electric ignition unit RHÖNA-Acetylene Itedpfx Aceudn Rzjreh Double-sided cable protection (collision protection) of the portal bridge via emergency stop Kjellberg® plasma marking unit FineMarker Fully automatic support for FineMarker Kjellberg® plasma labeling system FineMarker CNC interface for FineMarker / connection to the CNC control Module for the automatic control of the marking device 3626

Condition: excellent (used), Year of construction: 2017, working range: 4,000 mm, overall weight: 6,500 kg, total width: 2,400 mm, total height: 2,600 mm, total length: 6,000 mm, Working area X Axis:4000mm Working area Y Axis:2000mm Working area Z axis:400mm Itjdpfx Acey T Hywjroh Power resonator: 300kW / Amp Feed rate X-Axis: 10000mm/min. Feed rate Y-Axis: 10000mm/min. Feed rate Z-Axis: 10000mm/min. Dust collector: Kemper Length: 6000mm Width: 2400mm Height: 2600mm Weight: 6500kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: used, Year of construction: 2019, functionality: fully functional, Plasma Cutting System Becky Job Master 6.20 with Extraction Table – Year 2019 This plasma cutting system is being sold due to an upgrade to a laser cutting machine. The machine is fully operational and can be inspected and tested under power. Location: Vorarlberg Technical Data Manufacturer / Model: Becky Job Master 6.20 Year of Manufacture: 2019 Working Area: 6,000 × 2,000 mm Z-Axis Travel: 300 mm Max. Cutting Speed: 75 m/min Dimensions: Itedpox U Dqisfx Acrsh Machine Length: 8,000 mm Machine Width: 3,700 mm Overall Height: 2,000 mm Work Table Height: 820 mm All accessories belonging to the system are included, such as: Hypertherm XPR 170 power source Donaldson filtration unit Software etc. Sale excludes disassembly, transport, and installation.

Condition: excellent (used), Year of construction: 2020, operating hours: 860 h, functionality: fully functional, machine/vehicle number: 2426201745, type of input current: AC, working range: 3,000 mm, sheet thickness (max.): 50 mm, sheet thickness steel (max.): 50 mm, table length: 3,000 mm, working width: 2,000 mm, Equipment: documentation/manual, ZINSER 2426 CNC plasma cutting machine with Hypertherm XPR170 VWI Year of manufacture 2020 – Very good condition – including programming software For sale is a well-maintained and little-used CNC plasma cutting machine, type ZINSER 2426, with a Hypertherm XPR170 plasma source. The machine is in very good technical and optical condition and has only been used in our own operations. It is immediately ready for use and can be inspected and demonstrated under power after prior arrangement. Technical data: Manufacturer: ZINSER Type: 2426 Iedpfx Aceza Euferoth Year of manufacture: 2020 Control system: ZINSER CNC 5010 Plasma source: Hypertherm XPR170 with VWI technology Cutting table: 3,000 × 2,000 mm Travel range, longitudinal axis: approx. 4,000 mm Side arm on the right Preparation for the integration of a pipe rotating unit CNC-controlled height control Programming software / nesting software included Special features: The combination of the ZINSER machine and the Hypertherm XPR170 enables precise and economical cutting operations in mild steel, stainless steel, and aluminum. The modern XPR technology ensures excellent cut quality and high process reliability. Another advantage is the existing preparation for a pipe rotating unit, which means that the machine can be easily expanded if required. Scope of supply: ZINSER 2426 CNC plasma cutting machine Hypertherm XPR170 plasma source ZINSER CNC 5010 control system Programming software / nesting software Documentation and manuals Not included in the scope of supply: Extraction system. Location: Austria Inspection and test cut possible after prior arrangement. Disassembly and transport are to be organized by the buyer.

Condition: new, Year of construction: 2024, Everything is configurable on demand, very short production & delivery time. We will be happy to provide you with further information on request. Technical data on request. Standard equipment: welded steel construction DURMA CNC control unit (AURORA) Remote control diagnostics (Ethernet) Lantek Software W / Automatic Nesting Position determination of the sheet metal to be cut by laser DURMA Burner height control Double-sided drive system (rack and pinion) AC servo motors for X and Y axis movement CNC control outputs/inputs for the filter unit Consumables Starter-Kit Plasma torch * Ignition console * Burner height regulation with Ball screws on double Linear bearings * Special equipment: Hypertherm Max Pro 200 + hose package + nozzles + Durma THC + torch Hypertherm HPR 130 XD + hose package+ nozzles + Durma THC + ignition console + burner Hypertherm HPR 260 XD + hose package+ nozzles + Durma THC + ignition console + burner Hypertherm + Hypertherm HPR 400 XD + hose package + nozzles + Durma THC + ignition console + burner CE Standard Safety wire Automatic gas console for Hypertherm, Manual gas console for Hypertherm, Autogenous cutting torches Plasma torch protection system manual plasma angle cutting head, CNC angle cutting head (+/- 45). Single drilling head Multiple drilling head Filter for 130A, 260A or 400A Pipe cutting unit Ø50 mm - Ø400 mm Additional support for the pipe cutting unit Warning lamp for error and program end With over 60 years of experience Itedpfxsfiqgrs Acrjh

Condition: new, Year of construction: 2024, Everything is configurable on demand, very short production & delivery time. We will be happy to provide you with further information on request. Technical data on request. Standard equipment: welded steel construction DURMA CNC control unit (AURORA) Remote control diagnostics (Ethernet) Lantek Software W / Automatic Nesting Position determination of the sheet metal to be cut by laser DURMA Burner height control Double-sided drive system (rack and pinion) AC servo motors for X and Y axis movement CNC control outputs/inputs for the filter unit Consumables Starter-Kit Plasma torch * Ignition console * Burner height regulation with Ball screws on double Linear bearings * Special equipment: Hypertherm Max Pro 200 + hose package + nozzles + Durma THC + torch Hypertherm HPR 130 XD + hose package+ nozzles + Durma THC + ignition console + burner Hypertherm HPR 260 XD + hose package+ nozzles + Durma THC + ignition console + burner Hypertherm + Iodpfx Aefirx Tocroth Hypertherm HPR 400 XD + hose package + nozzles + Durma THC + ignition console + burner CE Standard Safety wire Automatic gas console for Hypertherm, Manual gas console for Hypertherm, Autogenous cutting torches Plasma torch protection system manual plasma angle cutting head, CNC angle cutting head (+/- 45). Single drilling head Multiple drilling head Filter for 130A, 260A or 400A Pipe cutting unit Ø50 mm - Ø400 mm Additional support for the pipe cutting unit Warning lamp for error and program end D9hnyc97o With over 60 Yes

Condition: new, neu ca. 12 - 14 Wochen ab Auf Deutschland 25400 € 485.14 € 1250x2500 mm HYPERTHERM Powermax 45 XP 6 mm 12 mm 25 mm 4 mm 45 A 45 A 50 % ED, 32 A 100 % A 24 m/min 1/10 mm 470 l Itsdpfx Acewiryuoroh 500 kg/m² 3060 mm 1760 mm 1500 mm 500 kg compressed air powered plasma sourceHYPERTHERM Powermax 45 XP CNC-workbench software (external PC not included) height adjustment by arc voltage set-up laser precision profile rail guide(HiWin) zero backlash HTD drive belt driven by step motors solid frame construction seperate renewable support grate water trough to catch flying sparks swimming burner bearing in combination with exchangeable slide screws, enables constant cutting height hand operation unit for comfortable processing and set up on the workpiece users manual in GERMAN according to CE rules ALTERNATIVE PLASMA SOURCES: HYPERTHERM PMX 65 Sync PMX 85 Sync PMX 105 Sync PMX 125 Sync plasma type comp. air comp. air comp. air comp. air plunge power 16 mm 20 mm 22 mm 25 mm seperating cut 32 mm 38 mm 50mm 57mm recommended thickness (unalloyed steel) 6 mm 16 mm 19 mm 22mm max. thickness (unalloyed steel) 16 mm 20 mm 22 mm 25 mm price € 26.900,- € 28.400,- € 29.900,- € 32.800,- OPTIONS: water tank to quickly fill and drain thetrough € 2.870,- pneumatic marking pin € 770,- pneumatic engraver € 1.920,- suction bridge (prepared for suction diam.160mm, important for galvanized and thin sheets) € 1.020,- suction- and filter unit Caremaster IFA 1,1 kW, fan power 2.500 m³/h € 2.950,- higher gantry 200 mm € 710,- higher gantry 300 mm € 900,- automatic nesting € 500,- PlasmaScan camera system € 830,- ohmic contacting for MaxPro200 € 280,-

Condition: new, neu ca. 12 - 14 Wochen ab Auf Deutschland 23200 € 445.44 € 1000x2000 mm HYPERTHERM Powermax 45 XP 6 mm 12 mm 25 mm 4 mm 45 A 45 A 50 % ED, 32 A 100 % A 24 m/min unter 1/10 mm 300 l 400 kg/m² 2560 mm 1460 mm 1500 mm 400 kg compressed air powered plasma sourceHYPERTHERM Powermax 45 XP CNC-workbench software (external PC not included) height adjustment by arc voltage set-up laser precision profile rail guide(HiWin) zero backlash HTD drive belt driven by step motors solid frame construction seperate renewable support grate water trough to catch flying sparks swimming burner bearing in combination with exchangeable slide screws, enables constant cutting height hand operation unit for comfortable processing and set up on the workpiece users manual in GERMAN according to CE rules ALTERNATIVE PLASMA SOURCES: HYPERTHERM PMX 65 Sync PMX 85 Sync PMX 105 Sync PMX 125 plasma type comp. air comp. air comp. air comp. air plunge power 16 mm 20 mm 22 mm 25 mm seperating cut 32 mm 38 mm 50mm 57mm recommended thickness (unalloyed steel) 6 mm 16 mm 19 mm 22mm max. thickness (unalloyed steel) 16 mm 20 mm 22 mm 25mm price € 24.600,- € 26.100,- € 27.600,- € 30.600,- Options: Ijdpfewiq Scox Acreth water tank to quickly fill and drain thetrough € 2.360,- pneumatic marking pin € 770,- pneumatic engraver € 1.920,- suction bridge (prepared for suction diam.160mm, important for galvanized and thin sheets) € 1.020,- suction- and filter unit Caremaster IFA 1,1 kW, fan power 2.500 m³/h € 2.950,- higher gantry 200 mm € 710,- higher gantry 300 mm € 900,- automatic nesting € 500,- PlasmaScan camera system € 830,- ohmic contacting for MaxPro200 € 280,-

Condition: new, Year of construction: 2021, machine/vehicle number: XPR300-005397, type of input current: three-phase, overall weight: 680 kg, input voltage: 360 V, cutting current: 300 A, ambient temperature (max.): 40 °C, We offer this new Hypertherm XPR300 plasma cutting source, year of manufacture 2021. Only the plasma source is for sale. New, unused. 2 plasma sources available. Forklift on site. Manufacturer: Hypertherm Itsdpjy Dqrfofx Acrjh Model: XPR300 Year of manufacture: 2021 Condition: new Category ID: 1448 Type ID: 2170 Type: plasma cutting machine If you have any questions or need further information, please send us a message or call us.

Year of construction: 1989, condition: good (used), Operating hours: 17 Itedjbfa Hwepfx Acroh Machine number: 160973 Power: 4.500 W Voltage: 220 V Open circuit voltage: 320 V Amperage: 16 A Insulation type: F Cooling type: F

Condition: excellent (used), Plasma cutter SAF Nerta Zip 20-40 A Type 0408_2240 380 Volt 10/18 A 220 Volt 16/30 A Cutting current 20/40 A Transport dimension : Itodsvdqkvepfx Acrjh Length 700 mm width 430 mm height 970 mm Weight 90 kg

Condition: excellent (used), Year of construction: 2012, Operating range V808 Min. / max. height 10 – 500 mm1 Min. / max. width 60 – 1.250 mm Max. positioning weight 13.200 kg Min. material length 1.200 mm Max. cutting width at the bottom 800 mm (only plasma marking and cutting) Ijdpfxozcfpze Acroth Plasma cutting unit* Hypertherm HPR260XD Virtually dross-free cutting max. 32 mm Marking lines Yes, marking and cutting with the same consumables Plasma gas mild steel O2 (99,9% pure clean, dry, oil-free) Shield gas mild steel O2/air (99,9% pure clean, dry, oil-free) Cutting speed 12 mm Approx. 3850 mm/min., 260A Cutting speed 20 mm Approx. 2170 mm/min., 260A Cutting speed 32 mm Approx. 1135 mm/min.; 260 A Fuse Additional 75 A slow is required Plasma Gas O2 (99,9% pure clean, dry, oil-free) Consumption 80l/min System pressure 10 bar * grounding, max. 6m of machine: AC power, PE, and service grounds must be connected to all equipment according to local and national codes. Oxy-Fuel cutting unit Gas supply Magnetic valve with back-fire protection Ignition Automatically Gas Acetylene Consumption 20l/ min System pressure 2 bar Cutting Gas O2 Consumption 450l/ min System pressure 10 bar Operational direction From right to left Profiles 1 Flat steel Angles European standard channels (UNP) European I-beams (IPE) European standard beams (IPN) European wide flange beams (HE) British universal beams (UB) British universal columns (UC) Square tubes 1 Small profiles have to be sufficient straight. General Voltage Stabilizer Not included Ambient temperature 0 - 35°C max. 95% relative humidity Working height 760 mm (+/- 25 mm)

Condition: good (used), Year of construction: 2008, functionality: fully functional, Fully operational plasma cutting machine in very good condition. Iedpewinpxjfx Acroth MicroStep PLS 7501.25PG Equipped with two torches: plasma and gas. Power source: Hypertherm, HyPerformance Plasma HPR260. Cuts mild steel and stainless steel. Table dimensions: 7.5 m x 2.5 m. The machine can be inspected under power in Vilnius.

Condition: used, Year of construction: 2011, CNC gantry plasma cutting machine Manufacturer: Eckert Type: Jantar 2 Year of manufacture: 2011 CNC control Working area: 2 x 4 m 1 plasma torch with Kjellberg HiFocus 161i power source Itodpfxey Nqcbo Acreh Automatic gas console Extraction table 3626

Condition: excellent (used), Year of construction: 2022, operating hours: 650 h, functionality: fully functional, working range: 6,000 mm, sheet thickness (max.): 150 mm, sheet thickness steel (max.): 150 mm, table length: 6,000 mm, working width: 2,000 mm, Equipment: documentation/manual, Used Microstep CombiCut 6001.20 for applications up to 150mm structural steel. The system has the following features: CombiCut gantry, driven on both sides Oxy-fuel cutting torch, acetylene, up to 150mm cutting capacity Piercing, fully automatic Drilling with 10.3kW drilling support Double-sided guided clamping system Drilling up to 30mm diameter Tapping up to M20 Countersinking corresponding to the drilling diameter Including calibration unit for the drilling tools All tools and carriages on the gantry are driven. Conversion to plasma cutting (straight) is possible! Tool changer mounted at the table end for 6 tools, SK40 tool holders (not included) Oxy-fuel cutting table 6000 x 2000mm, designed for sheets up to 150mm Table is cleaned and ready for immediate use (consisting of 2 elements) Table has electronic flap control Iedpjy Uw Hwsfx Acrsth Connection to a standard filter system is possible; this can be offered as an optional extra. External machine control with 24" monitor Control cabinet mounted on the gantry to minimize cable drag – therefore, very easy to maintain. Guideways: Milled S49 rails with beveled rack and pinion The machine has been fully tested and inspected. All functions are present and ready for use. The system has an Asper (CAM software) license installed and can be connected to the network. Office licenses are not included! We can offer the system with assembly and commissioning. If assembly is carried out by us, the system will be installed with a functional guarantee. Furthermore, if assembly is carried out by AK Industry, the machine will have a 3-month warranty. Inspection possible at any time!

Condition: ready for operation (used), Year of construction: 2020, functionality: fully functional, machine/vehicle number: 2815, sheet thickness (max.): 100 mm, overall weight: 1,100 kg, total width: 3,500 mm, cutting current: 154 A, TECHNICAL DETAILS Working area: 9,000 mm Sheet thickness (max.): 100 mm MACHINE DETAILS Overall width: 3,500 mm Overall weight: 1,100 kg Type of input current: Three-phase Itodjy Tkkyspfx Acrjh Input voltage: 400 V Cutting current: 154 A Input frequency: 50 Hz Short-circuit current: 6 kA IP protection rating: 43/20 Power supply: 3L+N+PE AC 400/230 V, 50 Hz

Condition: ready for operation (used), Year of construction: 2008, functionality: fully functional, type of input current: three-phase, input voltage: 400 V, total width: 4,780 mm, total length: 8,200 mm, table length: 6,400 mm, table width: 2,167 mm, travel distance X-axis: 2,000 mm, travel distance Y-axis: 6,000 mm, space requirement width: 6,380 mm, Number of cutting heads: 1 Number of drilling heads: 1 Table length: L [m] 6 Table width: WT [m] 2 Channel width: WCH [m] 0.8 Itjdpfx Aswhk E Hjcrjh Cutting machine with cutting table and sectional extraction: 1 USB flash drive (USB 2.0): 1 Basic tool station type R (A, B-axis for MG): 1 Remote diagnostics: 1 AsperWin – Basic module: 1 AsperWin – Nesting module: 1 AsperWin – Bevel cutting module: 1 AsperWin – Pipe cutting module: 1 AsperWin – Bevel cutting module (SolidSel): 1 Remote control for filter unit: 1 Connection of the filter unit to the power distribution unit: 1 Power distribution unit for the system: 1 Integration of the plasma source into the CNC system HPR, HD, HT, HF FF: 1 MG-22 drilling head, max. drill bit 22 mm, max. tap bit 16 mm, 5.5 kW, Y- and Z-axis 1 Cooling system – ecological cooling system for the drill bit 1 ISO 40 6-tool clamping magazine for automatic tool change linear PMB6 1 RSV 100-500 HHP pipe cutting device 1 880 mm grating for duct cover, 1 m long 6 RSV 100-500 HHP support rollers on rails 2 1 m rails for support rollers with 2 rails 7 Chuck for square pipes up to 500 mm in diameter, 4 jaws 1 Signal light 1 DFPRO 8; ART501/9 kW; 6000 m3/h [15-3x3.5-2 m - 1x] [15x1.5 m - 2x] 1 HPR260 Automatic 1

Condition: new, Year of construction: 2024, NEW Plasma Cutting Machine. Dimensions: 3,000 mm x 1,500 mm Max. steel cutting thickness: 22 mm Itsdpfotu E Dusx Acrjh Max. stainless steel cutting thickness: 12 mm Supplied with CAD CAM software. DWG and DXF data transfer via USB and network card. CE certification. ISO 9001, GB/T 19001. 120 A generator. The operational cost is extremely low – only 5.5 kW and compressed air!

Condition: used, Year of construction: 2010, functionality: fully functional, sheet thickness (max.): 50 mm, sheet thickness steel (max.): 50 mm, sheet thickness aluminum (max.): 35 mm, overall weight: 4,000 kg, total width: 2,000 mm, total length: 6,000 mm, working width: 2,000 mm, travel distance X-axis: 6,000 mm, type of cooling: air, ambient temperature (max.): 40 °C, Equipment: documentation/manual, Used MicroStep oxy-fuel cutting machine (plasma system) SPL 6001.20 P with Kjellberg torch. Itedpfey T Exrsx Acrjh Used, in working condition. Will be cleaned before delivery. Can be inspected on site. Exhaust system can be purchased separately.

Condition: new, Year of construction: 2026, Geka plasma cutting machine GCS P-3015 table size 3000 x 1500mm incl. plasma source Hypertherm 105A incl. Hypertherm nesting software - GEKA CNC cutting table - Hypertherm Powermax - Cutting capacity: steel 22mm, stainless steel 20mm, aluminum 12mm - CNC control with GproCUT 2D CAD cutting software - Nesting included. - Country of manufacture Spain incl. CE conformity. - Heavy duty base for more support and rigidity. - CNC Tex computer control with touch screen. - Linear guides on all axes for high repeatability. - Safety cutting head to prevent damage to the cutting head. - Rack and pinion gearbox with 70kg/cm servo motors. Itjdey T N R Ejpfx Acrjh - Fully enclosed cable drag protects cables from damage - Movement speed 40 meters/min. - Resolution 0.01 mm. - Optional automatic lubrication in all axes. - Optional, separate suction chambers in the machine bed. - Z-axis with integrated THC (Torch Height Control) to ensure automatic cutting distance between torch and material during the entire cutting process. - Torch anti-collision system (machine stops before any collision) - Laser pointer to check the X and Y axes for zero reference. - The effective cutting area for P-3015 is 3000 x 1500mm. - Gantry height Z = 100 mm.