Used Hydraulic plate shears for a plate thickness over 13mm for sale (72)

Condition: good (used), Year of construction: 1990, Used shear from Safan Cjlq Tifjv Rg Hteiegt Type HVS 310 13/16 Capacity 3100 x 13mm and 16mm over 1 Meter Electric backgauge and adjustable cutting angle and gap Machine is tested, but sold as traded in

Condition: used, Year of construction: 1992, gebraucht 1992 9680 prompt, Zwischenverkauf v Belgien 17300 € 1 13840 € 2050 mm 6 mm Cgslqouunkwj Tifijt 12 - 20 1/min 0,5 - 3 ° 13 750 mm 7.5 kW 770 mm 2680 mm 1650 mm 1570 mm 3000 kg link motion controlled Backgauge with handwheel for fine adjustment Cutting angle adjustment 1 side stop 1000 mm manual cutting gap adjustment rear light barrier shield Knives newly sharpened backgauge motor 0,37 kW Operating manual of identical HACO TS in German DOES NOT COMPLY WITH GERMAN UVV & AUSTRIAN AMVO

Condition: good (used), Year of construction: 1995, Max. cutting length 3050 mm Material thickness 37 kg/mm² 12 mm Material thickness 70 kg/mm² 8 mm Cutting angle 1.8 degrees Stroke rate 8 - 13 min. Number of hold-down clamps 12 Drive power 18.5 kW Dimensions L x W x H 4150 x 1950 x 1950 mm Weight 8000 kg Celq Tifsvkw Dveiegt Accessories / Special features: • ELGO Type 71 motorized NC positioning control for the backgauge, length approx. 900 mm • If necessary, the toggle lever system allows the machine to operate with only one cylinder at a reduced cutting capacity of approximately 55% of the nominal capacity. This simultaneously increases the cutting sequence for more efficient work with thin sheet metal. Switching from fast to slow is done using a selector switch on the control panel. • Hydro-mechanical drive via a powerful toggle lever • Easy cutting gap adjustment on both sides • 2 cylinders mounted externally on the machine, easily accessible • Vertical, stable guides • Upper and lower blades each with 4 cutting edges • Hydraulic overload protection • Proportional force of the hold-down clamps • The machine frame is a fully welded construction and is machined in one setup (no screwed parts) • Portable electric foot switch • Blades suitable for black sheet metal and stainless steel • Ball transfer units in the table • 1 angle stop • 1 support arm • CE-compliant Siegfried Volz Machine Tools Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel

Condition: ready for operation (used), Year of construction: 1991, Functionality: fully functional, sheet thickness (max.): 16 mm, sheet width: 3,100 mm, TECHNICAL DETAILS Sheet width: 3100 mm Sheet thickness: 16 mm Stroke rate: 12 strokes/min Control system: ELGO MACHINE DETAILS Dimensions: 4100 x 1900 x 2300 mm Total power requirement: 30 kW EQUIPMENT Cjlq Tov Um Sdeifisgt - 1000 mm Elgo electric backgauge - Angle stop - Sheet support arms - Foot switch

Condition: new, Year of construction: 2024, sheet thickness steel (max.): 16 mm, sheet thickness (max.): 16 mm, cutting length (max.): 6,150 mm, warranty duration: 12 months, Equipment: finger protection, lighting, safety light barrier, PLACE OF PRODUCTION : TURKEY CONTROL UNIT : Esa S 630 (CNC Control Unit) BACKGAUGE : 1000 mm Ball screw Backgauge with AC Motor FRONT SUPPORT : Table with sheet metal slider balls FRONT SUPPORT : Support arms L=1000 mm FRONT SUPPORT : Squaring arm L= 1000 mm, with scale & T-Slot TOP & BOTTOM BLADES : Top 2 side and Bottom Blades with 4 side THROAT DEPTH : 350 mm BLADE GAP ADJUSTMENT : Motorized CUTTING LINE : Laser Bending Line SAFETY : Safety Covers (Throat Depth Side and back) SAFETY : Front Finger Guards, 1 mt flip-up FOOT PEDAL : Foot Pedal with Emergency Stop ELECTRICAL SYSTEM : 380 V, 50-60 Hz, 3 Ph PACKAGING : Overseas special packaging (Special flexible Aluminum barriers OTHERS : Hydraulic Hold Downs OTHERS : Cutting Length Adjustment from CNC OTHERS : Cutting Angle Adjustment from CNC OTHERS : Emergency Stop buttons OTHERS : Sheet Sliders on the back side Cutting Length : 6160 mm Cutting Capacity : 16 mm Cutting Angle : 0.5 - 2.5 degree Strokes per minute : 10-5 pcs/min. Throat Depth : 350 mm Number of Holddown Cylinders : 31 pcs Main Motor Power : 45 kW Oil Tank Capacity : 750 lt Length : 7200 mm Width without Front Support : 2550 mm Total Width : 3700 mm Height : 2780 mm Cgslqevgmpyo Tifist Approximate Weight : 49500 kg

Condition: used, Year of construction: 1994, sheet width 3000 mm plate thickness 16 mm Cjlq Tot Tqkdsifiogt distance between columns 3200 mm throat 310 mm stroke 300 mm table width 820 mm table height over floor 1215 mm Number of downholders 12 St. cutting angle cutting angle adjustment 1- ° back stop - adjustable mm total power requirement 30 kW weight of the machine ca. 19 t dimensions of the machine ca. 3,8 x 2,65 x 2,85 m Machine was overhauled in 2010 and was modernized with light barrier at table. Machine has an automatic back stop with DRO. Cutting angel is adjusted by motor. Cutting gap is manually adjusted by adjustment of table. Along with the machine we supply a loading/unloading table.

Condition: good (used), Year of construction: 1987, Used shear from Safan Cslqev Rg Hms Tifisgt Type HVS 310 13/16 Capacity 3100 x 13mm and 16mm over 1 Meter Electric backgauge and adjustable cutting angle and gap Machine is tested, but sold as traded in

Condition: ready for operation (used), Year of construction: 2012, Functionality: fully functional, machine/vehicle number: 09233-K06P27, back gauge: 1,000 mm, sheet thickness (max.): 16 mm, cutting width (max.): 3,100 mm, controller model: Cybelec Cybtouch 6, power: 30 kW (40.79 HP), TECHNICAL DETAILS Max. sheet thickness: 16 mm (42 kg/mm²) Cutting angle: 2.5° Max. cutting width: 3,100 mm Number of cuts per minute: 10 Cgolq Tjv I Srpsifiot Backgauge length: 1,000 mm Table height: 900 mm Maximum pressure: 270 bar Number of downholders: 14 Control system: Cybelec Cybtouch 6 Power: 30 kW Oil volume: 500 l MACHINE DETAILS Length: 4,050 mm Width: 2,250 mm Height: 2,350 mm Weight: 16,400 kg Maximum noise level: 70 dBA Operating temperature: 0 - 50 °C Installation dimensions: approx. 6.6 x 3.8 m EQUIPMENT - Ball screws in the backgauge - Touchscreen on the backgauge

Condition: used, Year of construction: 1984, Cutting length: 1250mm, table height: 830mm, connected load: 22kW, length: 1900mm, width: 2200mm, height: 1900mm, weight: 9.6t, with documentation, without spare parts. Cgelq Tisv Hpr Djfiot

Condition: excellent (used), Technical data: maximum cutting width: 3100 mm maximum cutting capacity steel St40: 10.0 mm Cgolqov H Rwzj Tifiot kerf adjustment adjustable rip fence motor power: 15 kW Dimensions (length x width x height): approx. 3900 x 1950 x 2150 mm Weight: approx. 9.5 tons The seller is not liable for typing or data transmission errors. The machine's appearance, technology and wear correspond to its age; used machines are sold without any warranty.

Condition: used, Year of construction: 2006, sheet width 1030 mm plate thickness 15 mm rear stop 600 mm cutting angle 3,5 ° no. of strokes 48 Hub/min total power requirement 22 kW dimensions of the machine ca. 2500 x 1700 x 1500 mm weight 3100 kg Cgolqsvuz Rze Tifijt

Condition: used, Year of construction: 1994, sheet width / mm plate thickness / mm distance between columns / mm Manufacturer: EHT Type: TSS 20-25 Year of construction: 1994 Max. Cutting length: 2250 mm Max. Sheet thickness: 20 mm Strip width min / max: 10/1000 mm Distance between the consoles: 2530 Height above the ground: 900 mm Table length without extension arms: 3030 mm Oil volume: 800 l Max. Pressure: 280 bar Operating voltage: 400V Control voltage: 230 V. Nominal current: 87 A. Weight: 15.8 to Dimensions L x W x H: 3500 x 2500 x 2400 mm Cgolq Tifouddh Aeiet Accessories / special equipment Pneumatic cutting gap adjustment Cutting length limitation Roller conveyor elevation bracket Hand protection 1 bay Multitron control Multitron PS 80; ELCO 85 P Lower knife height adjustment

Condition: good (used), Year of construction: 1998, Used sheet metal shears from Haco Cgolq Tifevzccfsijt Type HSLX 3013 Capacity 3050 x 13 mm Electric back gauge, cutting angle and cutting gap adjustment

Condition: used, SHEET METAL LENGTH 6000mm SHEET METAL THICKNESS 20mm IN TOP CONDITION Cjlq Tishy Amnjfisgt

Condition: new, sheet length: 3060sheet thickness: 20,0total power requirements: 37weight approx.: 21,5messurements (LxWxH): 3910x3395x2640 Cjlq Tifod Egqxeisgt

Year of construction: 1994, Condition: used, sheet width 3000 mm plate thickness 16 mm distance between columns 3200 mm throat 310 mm stroke 300 mm table width 820 mm table height over floor 1215 mm Number of downholders 12 St. cutting angle 0,5 - 2,5 ° total power requirement 30 kW weight of the machine ca. 19 t Machine was overhauled in 2010 and was modernized with light barrier at table. Cgslqep A Dt Ne Tifijt Machine will be sold with automatic back stop with DRO. including flat belt conveyor

Condition: used, Year of construction: 1999, COLLECTOR 2.5m 16mm Colsufctmsq Tifijgt SHEET METAL LENGHT: 2500mm SHEET METAL THICKNESS: 16mm

Condition: new, sheet length: 6125sheet thickness: 16,0total power requirements: 45weight approx.: 49500messurements (LxWxH): 7200x3700x2780 Cgslq Tifed Ehh Aoist

Year of construction: 1980, Condition: used, sheet width / mm plate thickness / mm Cgjlqjg Twmhj Tifiot distance between columns / mm Hydraulic guillotine shears Year of construction: 1980 Brand: Mengele Width up to: 3000mm Sheet thickness CS: 24mm Sheet thickness SS: 13mm Stop max.: 1m Weight: 34 tons

Condition: refurbished (used), COMESSA Cslq Tijd Ryurefisgt HYDRAULIC GUILOTINE SCHERE WORKING LENGTH 3M CUTTING THICKNESS 20mm WEIGHT 23.000kgr

Condition: new, sheet length: 4065sheet thickness: 16,0total power requirements: 30weight approx.: 21000messurements (LxWxH): 4930x3300x2220 Cgslq Ted Ehh Noifist

Year of construction: 1991, Condition: refurbished (used), Manufacturer: DARLEY Cjlq Tifod S R I Aoijgt Type: DS 3100x20 Length of cutting: 3000mm Thickness of cutting: 20mm

Condition: new, sheet length: 3.200sheet thickness: 16,0column width: 3100total power requirements: 18,5weight approx.: 11700messurements (LxWxH): 4,2x 2,050 x 2100 Multi-edge blades for cutting aluminum, carbon steel, and stainless steel  Cutting-line illumination and wire for shadow-line cutting • Stroke counter • Quick cutting-length adjustment • Hydraulic and electrical overload protection • Squaring arm and front support arms • Bed infill plates with ball transfers • Cgslq Tsd Ab Hljifiot Delta inverter with ball screw and polished rod with 0.01 mm accuracy • Backgauge adjustment according to blade gap • Backgauge retraction feature • Sub-program and programming loop • Sequence repeat function • Auto-cutting (Flying cut)

Condition: new, sheet length: 6125sheet thickness: 20,0total power requirements: 45weight approx.: 55000messurements (LxWxH): 7200x3700x2780 Colq Tifed Ehhzjiogt

Condition: new, sheet length: 3040sheet thickness: 16,0total power requirements: 30weight approx.: 15,5messurements (LxWxH): 3870x3315x2280 Cjlq Tied Egqyofiogt