Used press brakes with 50-74t bending force for sale (75)

Condition: repair required (used), Manufacturer: Amada Codpfx Asv Umm Ijddeaa Type: 5020 Year of construction: 1990, Number of axles: 3 Pressing force: 50t Bending length: 2000mm Sold without prisms, The machine works, moves, Error: End position of the Y-axis must be repaired. Height adjustment is missing,

Condition: used, functionality: fully functional, Year of construction: 2017, control type: CNC control, controller manufacturer: CYBELEC, controller model: MODEVA 15T, bending force (max.): 60 t, working width: 1,250 mm, stroke length: 265 mm, throat depth: 450 mm, distance between stands: 1,050 mm, number of axes: 4, type of crowning: CNC-controlled, travel distance X-axis: 650 mm, Equipment: european tool clamping system, DURMA press brake 1250 x 60 tons, year 2017 Cajdpexcfqqefx Addsa

Condition: excellent (used), functionality: fully functional, Year of construction: 1995, Fasti CNC pressbrake Model 904 - 50/20 Year : 1995 Capacity : 2050 mm. x 50 tons CNC control : Delem DA 23 e - 6 axis 2 hand control and footpedal Front arms Caodpfxexdahgs Addoa Angle punch : 2000 mm. in segment Gooseneck punch : 2000 mm. in segment Gooseneck punch : 1000 mm. V die : 10 - 15 - 22 mm. in 2000 mm. V die : 30 - 40 mm. in 1000 mm.

Condition: as good as new (ex-display), Year of construction: 2023, The environmentally friendly CNC servo press brakes from WEINBRENNER, model series WPS, represent a maximum improvement on the previous hydraulic standard machines. Up to 60 % energy savings and higher angular accuracy. The tool holder corresponds to the AMADA system, as do the tools. The stability of the press is optimized by the closed frame construction To compensate for deflection, the press is equipped with a motorized, CNC-controlled table crowning system (System WILA). Technical data: Maximum press capacity: 50 tons Bending length: 2040 mm Table width: 60 mm Table width with WILA lower tool: 90 mm Table height from floor: 930 mm Installation height: 590 mm Max. Press stroke: 300 mm Lowering speed: 150 mm/sec. Pressing speed: 10 mm/sec. Retraction speed: 150 mm/sec. Max. utilization range backgauge (X axis): 750 mm Max. utilization range backgauge (R axis): 160 mm Adjustment speed of the backgauge in the X-axis, servomotor: 330 mm/sec. Positioning accuracy of the backgauge: +/- 0.03 mm Motor power: 2x 5.5 kW Equipment / standard accessories: - CNC control " ESA S875-2D". This enables easy graphic programming of products. After one the control unit calculates the bending sequence and all axis positions (including collision warning), 15" TFT color display touch screen, USB interface, network connection, tool directory for 50 punches and dies each. Graphic 2D programming, 2D display while working, maximum 4 axes + auxiliary functions. - Arm adjustable in height and sideways in 2 axes for ergonomic and convenient operation of the CNC control. - Split upper tool, "Amada" system, manufacturer Italy, material C 50 (HRC 50-52) induction-hardened and ground on the working surfaces. ground on the working surfaces. Load capacity: 100 to per meter. Standard delivery: Pitch: 2 x 835 mm, horn left and right each 100 mm each, rest in smaller pitch. Height 66.6 mm - Bottom tool / 4-fold prism cube CroMo 4, ground 60x60 mm, V-openings standard: 16 - 22 - 35 - 50 mm - 2-axis backgauge "X - R", AC servomotors, travel: X=0 mm, R=160 mm, positioning accuracy + / - 0.03 mm, Travel speed: 330 mm / sec. Including 3 laterally adjustable stop fingers - Laser protection "FIESSLER" with 2-fold beam, type AKAS / LCII, operation of the press only possible with foot pedal. - Automatic motorized table crowning system WILA, integrated in the CNC - front sheet supports (2 pieces) can be moved laterally via linear guide, height adjustment with handwheel. Equipped with wide brush supports Codpfxoth U Edo Addsaa - German operating instructions with spare parts list - CE conformity

Condition: new, Hydraulic synchronized bending press MVD Mod. I-Bend B 2100 60 ESA S630 Colour Numerical Video Graphic Control Controlled axes No. 4 ( Y1-Y2-X-R-) Multi-beam barriers NEW ELECTRONIC DSP LASER High speed motorized rear register UNIMEC (Made in Italy) GIVI MEASURES optical lines (Made in Italy) Bend length mm 2100 Power exerted Ton 60 Cable mm 410 Stroke mm 260 Opening mm 465 Upper tools and lower die ROLLERI supplied Caedpfx Adefh Nz Rodea

Condition: excellent (used), functionality: fully functional, Number of Straightening rolls: 7 plate width: 1665 mm Csdpfewlg I Ejx Addjaa plate thickness: 4 - 20 mm diameter of upper rolls: 4 x Ø 190 mm diameter of lower rolls: 3 x Ø 190 mm bending speed: 4 - 20 m/min weight of the machine ca: 11t dimensions of the machine ca.: 3,2 x 1,7 x 2,2 m We refurbished the machine three years ago.

Condition: like new (used), functionality: fully functional, Year of construction: 2022, machine/vehicle number: 220422B, control type: NC control, actuation type: hydraulic, controller manufacturer: Estun, controller model: E21, bending force (max.): 63 t, working width: 3,200 mm, stroke length: 100 mm, throat depth: 250 mm, distance between stands: 2,650 mm, operating speed: 15 mm/s, reverse speed: 60 mm/s, number of axes: 2, overall weight: 5,600 kg, total length: 3,288 mm, total width: 1,725 mm, total height: 2,355 mm, power: 5.5 kW (7.48 HP), Equipment: emergency stop, foot remote control, safety light barrier, Press brake is barely used and fully functional. It is connected and can be tested. Machine is sold with quick release and stock punch and matrix for 90° bends, there is also set for 30° bends. Caodpfxowxb Dhj Addoa

Condition: excellent (used), Year of construction: 1994, Hydraulic press brake Fab. TRUMPF Typ. TrumaBend V50 Year 1994 Technical data: Trumpf Make: Trumpf Type: TrumaBend V50 Year of construction: 1994 Capacity: 50 t Effective length: 1270 mm Stroke: 215 mm Operating pressure: 290 bar Voltage: 3 x 400V Rated current: 12.5 A Connected load: 8.0 kVA Compressed air connection: 6 bar Dimensions: approx. L 2.00 x W 2.00 x H 2.40 m Weight: 4750 kg Equipment: Control unit - Control system: Delem DA-28 Cedpfxer D Sdge Addoaa - Pneumatic die displacement - Hydraulic tool clamping top and bottom - Controlled axes: Y1, Y2, X, R - 3 manual stop fingers, pneumatically clampable - Tools: Punch set segmented, straight, 1050 mm, new Die V16, 30° 1000mm Die V08, 30° 1000mm Die V10, 30° 1000mm All data without guarantee. A demonstration under power is possible at any time in our exhibition hall.

Year of construction: 2022, condition: new, machine/vehicle number: C12_1, Electric press brake C12 with spindle drive CoastOne - Made in Finland New machine Pressing force: 52t Bending length: 1300mm Controlled axes: X-R axis (2x manual stop fingers) Standard type A / R1 / AMADA / Promecam press brake tool holder Control: TC15-2D graphic touchscreen Optional: - 4 or 5-axis backgauge system - Lazersafe light barrier system standard - Lazersafe IRIS light barrier system - Lazersafe IRIS + light barrier system angle measuring system - extra screen with 3D bending software - support table - Front and rear lights - WILA / Trumpf / Type B - tool holder system Cedpfeh I D Hbsx Addsaa - 2 sheet followers 36 months warranty after installation

Year of construction: 2005, operating hours: 54,000 h, condition: used, pressure 50 t chamfer lenght 1250 mm distance between columns 1020 mm Stroke beam 215 mm 470 mm 300 mm Quick speed,inspeed 150 mm/sec bendingspeed 0-10 mm/sec opening speed 150 mm/sec X-axes 600 mm 200 mm Z1+Z2 axes controlled by cnc manuell,4 Anschlagfinger mm Number of working hours 54000 h Dimensions of machine: length 1600 mm width 1500 mm height 2300 mm weight 4900 kg Control Task total power requirement 9 kW dimensions of the machine ca. 2x2x2,5 m Caedeppdpcopfx Addja

Year of construction: 2024, condition: new, SPECIAL ACTION: Folding press AD-S 1260 length/width/height: 2300mm/1550mm/2850mm Weight: 47000 kg Bending force: 60 tons bending length: 1250 mm Passage between stands: 1050 mm Stroke:160mm Installation height: 530 mm Throat: 450 mm table height: 900 mm table width: 104 mm Y High speed: 200 mm/sec. Y Working speed: 10 mm/sec. Control CYBELEC MODEVA 19T touch screen CE with manual F.AKAS II M -FPSC-B-C (SAFETY PLC) Europ. upper tool P97.75.R08 (one of them in pitch) Europ. lower tool M.460R.85 (one of them in pitch) Manual quick clamping Y1, Y2, X, R (4 axes) X=650mm X,R CNC controlled motorized crowning 60mm die holder (only for european dies) Overhang 410 sliding support arms at the front with T-slot, clip stop and guidance along the entire line Backgauge : Siemens DC Servo motorized & linear guide & ball roller system Support arms 2 pieces Stop finger 2 pieces With foot pedal Oil capacity: 100l Price is valid from Staufenberg. The machine can be viewed and demonstrated at any time by appointment in our demonstration centre in Staufenberg. Further machines are ready for demonstration at our premises in Staufenberg. We will be happy to provide you with further information upon request. Caodpfx Adod R Dhpodja

Condition: used, pressure 50 t chamfer lenght 1500 mm distance between columns 1220 mm Control Cybelec DNC 1200 closing speed 95 mm/min working feed 1-10 mm/sec work stroke 156 mm overrun time 59 ms tracking travel 6 mm throat 200 mm distance table - lower edge of ram 301 mm table width 160 mm table height 850 mm x-axis 550 mm travel R-axis +/- 50 Cajdera Rrhjpfx Addsa weight ca. 3600 kg a lot of lower and upper tools incl. work light

Condition: used, pressure 70 t chamfer lenght 2600 mm distance between columns 2750 mm stroke 60 mm total power requirement kW weight of the machine ca. 4,3 t Cajdotqqqiepfx Addsa dimensions of machine L x W x H 4,45 x 1,30 x 2,53 m Accessories: upper and lower die (each in segments) on 2500 mm length, 2 upper die segments each 835 mm long, back stop

Condition: new, Year of construction: 2024, Attention!! Special Offer!! Warranty inspection free of charge—only for Customers who have taken part in the demonstration at the machine showroom in Bydgoszcz. A part of our machines is available IMMEDIATELTY. Hydraulic press brake PBO-2563-N Estun E21 Specifications - Maximum bending thickness (S235): up to 4.0 mm - Nominal bending force: 630 kN - Maximum bending length: 2500 mm - Throat depth: 250 mm - Maximum stroke: 120 mm - Daylight: 370 mm - Distance between side frames: 2000 mm - Backgauge travel distance: 600 mm - Motor power output: 5.5 kW - Length: 2600 mm - Width: 1400 mm - Height: 2200 mm - Weight: 3700.0 kg Tools Front supports: 2 pcs. Backgauge drive (travel along the X-axis): electric motor Ram drive (travel along the Y-axis): electric motor Punch quick change tooling system form AMADA E21 control (mounted on a swivel arm) Manages the movement along the X axis (backgauge) and Y-axis (ram). Allows to create up to 40 programs Each program can consist of up to 25 steps Intuitive operation using English abbreviations explained throughout the training course. It is a sophisticated but easy-to-use controller that allows operation in three modes: Full manual Semi automatic Hands-free cycle mode Top quality components Rexroth hydraulic valve Schneider electrical components Omron and Schneider safety circuit parts. Steel hydraulic line tubings Hydraulic lines made of steel instead of rubber reduce the risk of future leaks. Safety We attach great importance to the safety of our Clients and their employees; therefore our press brakes are equipped with visible safety labels, side guards, rear safety doors, easily accessible safety switches and light curtains that protect the operator against inserting their hands between the upper and lower dies. The machines comes with carefully prepared instructions manual. The machine has a CE marking and EU declaration of conformity. Oil cooling system The Oil Cooling System guarantees the stability of the machine's performance even after long, continuous operation. Within the service, our technicians may: Specify the bending steps for intricate parts. Advise on material and gas selection Assist in the selection of operating parameters for different materials Included in the machine price 2-day training including installation of the machine - 1st day (up to 8 hours) - installation of the machine and learning to use the controller. - 2nd day (up to 8 hours) - independent work on the machine under the supervision of our technician with the possibility of programming specific parts manufactured by the Client. Telephone consultation with a specialist - 7.30 a.m. to 9 p.m. (Mon-Sat) - package of 8 hours to be used within 12 months - Free lending of transport rolls and two lifting jacks for easier positioning of the machine at Clients' facilities. The rollers and jack will be delivered after prior notification (no less than 7 days before delivery of the machine). Cajdsh Randjpfx Addsa Terms of cooperation - 24 month warranty - The machine is brand new - Warranty and post-warranty service provided by the seller - The Client is responsible for the machine during unloading and transporting on-site

Year of construction: 2022, condition: new, machine/vehicle number: Cone G20, Electromechanical CNC press Manufacturer: CoastOne Oy Type: Cone G20 Pressing force: 600 kN Bending spindles: 3 Controlled axes: X-R axis (2x manual stop fingers) Standard Type A / R1 / AMADA / Promecam press brake tool holder Control: TC15-2D graphic touch screen Cjdpfx Adoh I D Hxedeaa Options: - 4 or 5 axis backgauge system - Lazersafe light barrier system standard - Lazersafe IRIS light barrier system - Lazersafe IRIS+ light barrier system angle measuring system - extra screen with 3D bending software - support table - Light front and rear - WILA / Trumpf / Type B - tool holder system - 2x bending aids 36 months warranty after installation

Condition: good (used), functionality: fully functional, Year of construction: 1987, working width: 2,000 mm, stroke length: 105 mm, distance between stands: 1,600 mm, overall weight: 4,300 kg, total width: 2,000 mm, pressing force: 50 t, Promecam ITP2-050-20 Converted to Delem DA 65R control system in 2019 15" touch screen with graphics Bending length 2000 mm stand passage 1600 mm Bending pressure 50 T CNC back gauge X-R-Z1+Z2 axis Connected load 7.5kw Stroke 105mm Intermediate pieces Int100 Front support tables Caedpfju Dm Iusx Addea Amada tool system incl. many tools

Year of construction: 2024, condition: new, Länge/Breite/Höhe: 3200mm/1550mm/2750mm Weight: 3550 kg Bending force: 60 tons Bending length: 2050 mm Passage between stands: 1700 mm stroke: 265mm Installation height: 530 mm Projection: 410 mm table height: 900 mm table width: 104 mm Y Fast speed: 200 mm/sec. Y Working speed: 10 mm/sec. Cajdpfsfgz U Sjx Addsa Control CYBELEC MODEVA 19T touch screen CE with manual F.AKAS II M -FPSC-B-C (SAFETY PLC) Europ. upper tool P97.75.R08 (one of them in pitch) Europ. bottom tool M.460R.85 (one of them in pitch) Manual quick clamping Y1, Y2, X, R (4 axes) X=650mm X,R CNC controlled motor-driven crowning 60mm die holder (only for european dies) Overhang 410 sliding support arms at the front with T-slot, clip stop and guide along the entire line Backgauge : Siemens DC Servo motorized & linear guide & ball roller system Support arms 2 pieces Stop finger 2 pieces With foot pedal Oil capacity: 100l Price is valid from Staufenberg. The machine can be viewed and demonstrated at any time by appointment in our demonstration centre in Staufenberg. Further machines are ready for demonstration at our premises in Staufenberg. We will be happy to provide you with further information on request.

Condition: used, Hydraulic Schiavi folding machine 2500X50, motorized register, 400 recess. Dimensions: 290x150x200(h) cm, Weight 3800 Kg Codpfown D N Esx Addsaa

Condition: ready for operation (used), functionality: fully functional, Year of construction: 1995, working width: 2,050 mm, stroke length: 324 mm, pressing force: 63 t, PRESS FORCE: 200 tones BENDING LENGTH: 3050 mm DISTANCE BETWEEN COLUMNS: 2550 mm BEAM STROKE: 320 mm Casdpfxovf Hk Ij Addja CNC CONTROL: DNC 900 Cybelec BACK GAUGE: 5 axes motorised (X1-X2, Z1-Z2, R) BACK GAUGE FINGERS: 2 with support BENDING AID: 2x TOOL CLAMPING: Hydraulic, Weinbrenner type CROWNING: Hydraulic, automatic SHIFTING DOWN TOOLS: 4 positions (foldingand bending without retooling) YEAR OF CONSTRUCTION: 1996 BENDING TOOLS: 1 set used

Condition: new, Year of construction: 2024, Attention!! Special Offer!! Warranty inspection free of charge—only for Customers who have taken part in the demonstration at the machine showroom in Bydgoszcz. Hydraulic press brake PBO-2563-CNC OT-41 Specifications - Maximum bending thickness (S235): up to 4.0 mm - Nominal bending force: 630 kN - Maximum bending length: 2500 mm - Throat depth: 250 mm - Maximum stroke: 120 mm - Daylight: 370 mm - Distance between side frames: 2000 mm - Backgauge travel distance: 600 mm - Motor power output: 5.5 kW - Length: 2600 mm - Width: 1400 mm - Height: 2200 mm - Weight: 3700.0 kg Tools - Front supports: 2 pcs. - Backgauge drive (travel along the X-axis): servo motor - Ram drive (travel along the Y-axis): servo motor - Backgauge fingers positioning (R-axis): manual - Punch quick change tooling system form AMADA Otinus CNC OT-41 control The CNC controller Otinus is featured with convenient and intuitive menu. The software calculates the bending angle on its own. The large color touchscreen is readable from any angle. The controller can store up to 2,000 programs of 30 steps each. Top quality components - Rexroth hydraulic valve - Schneider electrical components - Omron and Schneider safety circuit parts. - Steel hydraulic line tubings - Hydraulic lines made of steel instead of rubber reduce the risk of future leaks. Safety We attach great importance to the safety of our Clients and their employees; therefore our press brakes are equipped with visible safety labels, side guards, rear safety doors, easily accessible safety switches and light curtains that protect the operator against inserting their hands between the upper and lower dies. Casdsgi Dphepfx Addsa The machines comes with carefully prepared instructions manual. The machine has a CE marking and EU declaration of conformity. Oil cooling system The Oil Cooling System guarantees the stability of the machine's performance even after long, continuous operation. Assistance by a specialist We strive to maintain constant communication with our Customers. To support this, every machine purchase includes a specialist support package with hours of expert guidance. Within the service, our technicians may: - Specify the bending steps for intricate parts. - Advise on material and gas selection - Assist in the selection of operating parameters for different materials Included in the machine price 2-day training including installation of the machine - 1st day (up to 8 hours) - installation of the machine and learning to use the controller. - 2nd day (up to 8 hours) - independent work on the machine under the supervision of our technician with the possibility of programming specific parts manufactured by the Client. Telephone consultation with a specialist - 7.30 a.m. to 9 p.m. (Mon-Sat) - package of 8 hours to be used within 12 months - Free lending of transport rolls and two lifting jacks for easier positioning of the machine at Clients' facilities. The rollers and jack will be delivered after prior notification (no less than 7 days before delivery of the machine). Terms of cooperation - 24 month warranty - The machine is brand new - Warranty and post-warranty service provided by the seller - The Client is responsible for the machine during unloading and transporting on-site

Year of construction: 2022, condition: new, machine/vehicle number: C15_1, Electric press brake C15 with spindle drive CoastOne - Made in Finland New machine Pressing force: 52t Bending length: 1600mm Caodpfxsh I D Hfj Addea Controlled axes: X-R axis (2x manual stop fingers) Standard type A / R1 / AMADA / Promecam press brake tool holder Control: TC15-2D graphic touchscreen Optional: - 4 or 5-axis backgauge system - Lazersafe light barrier system standard - Lazersafe IRIS light barrier system - Lazersafe IRIS + light barrier system angle measuring system - extra screen with 3D bending software - support table - Front and rear lights - WILA / Trumpf / Type B - tool holder system - 2 sheet followers 36 months warranty after installation

Condition: excellent (used), Year of construction: 2005, Technical specifications: Year of manufacture: 2005, revision 2025 Working length: 2050 mm Width between columns: 1665 mm Press force: 50 tons CNC control: AMADA AMNC PC, 2D graphics Screen: 15" TFT Controlled axes: Y1/Y2; X1/X2; R1/R2; Z1/Z2 Automatic bending angle measurement: AMADA DigiPro Dual speed: X; R; Z-axis Motorized adjustable backgauge Stroke: 200 mm Thrust: 400 mm Working height: 900 mm Laser monitoring: FIESSLER Motor power: 6 kW Csdpfxowmzd Rs Addeaa Dimensions (length x width x height): approx. 3000 x 1650 x 2500 mm Weight: approx. 4.8 tons Accessories: 1 set AMADA tool Condition: Very good, almost new condition The seller is not liable for typographical or data transmission errors. The machine's appearance, technology, and wear are consistent with its age; used machines are sold without any warranty.

Condition: excellent (used), Model Amada HF5012, 4 axis CNC Press brake Year 2003 Cedpfx Adjvxuk Nodjaa Tonnage 50 tons CD 2000 control with monitor Erwin Sick machine mounted light screen guarding system, side and rear interlocked fencing Max. Bend Length 1270 mm Width Between Columns 1035 mm Approach Speed 100 mm/sec Bending Speed 1 - 10 mm/sec Return Speed 1-100 mm/sec Oil Capacity Motor Power 6 kw Weight 3100 kg Dimensions Machine Length 2165 mm Machine Width mm Bed Length mm Distance Between Bed Bed Height 960 mm Machine Height 2300 mm Daylight Gap mm Throat Depth mm BROCHURE AND FURTHER INFORATION AVAILABLE UPON REQUEST

Condition: good (used), functionality: fully functional, HYDRAULIC GADE BENDING MACHINE 4000X50, RECESS 500, MANUAL REGISTER, DIMENSIONS: 460X175X255(H) cm, WEIGHT: 6,700 Kg Caedpfx Aevxir Ueddsa

Condition: like new (used), Year of construction: 1999, AMADA MODEL ITS2 50-20 50 TONS X 2000 HYDRAULIC UP STROKING 5 AXIS CNC PRESS BRAKE COMPLETE WITH OPERATEUR 1 5 AXIS CNC CONTROL Erwin Sick machine mounted electronic guards , side and rear interlocked fencing year 1999 stock no. 01917 description TYPE HYDRAULIC UPSTROKING BENDING PRESSURE 50 TONS BENDING LENGTH 2000 OPEN HEIGHT 370 STROKE LENGTH 100 THROAT DEPTH 400 TABLE WIDTH 60 NO. OF AXIS 5 AXIS CONFIGURATIONS X1-X YI-Y2 RI-R2 BACKGUAGE can be demonstrated under power BROCHURE AND FURTHER INFORATION AVAILABLE UPON REQUEST Caedpfx Adopygydedea