Condition: excellent (used), Year of construction: 1975, Functionality: fully functional, total height: 31,500 mm, total width: 13,500 mm, total length: 17,500 mm, pressing force: 40 t, table width: 1,000 mm, table length: 500 mm, operating speed: 200 mm/s, overall weight: 3,200 kg, reverse speed: 450 mm/s, ram plate width: 450 mm, ram plate length: 380 mm, ram stroke: 500 mm, distance between stands: 800 mm, power: 15 kW (20.39 HP), PYE 40 SS hydraulic press with ejector. Year of production 1975, manufacturer VEB Wema Zeulenroda (Germany). Machine after general overhaul. Replaced piston seal. Parameters: Maximum pressing force 40 tons. Working pressure 16 MPa. Upper table 380 x 450 mm. Lower table 500 x 1000 mm. Ground clearance 800 mm. Cylinder stroke 500 mm. Fgshxyjtzxtpja R Teb Down speed 200 mm/sec. Upward speed 450 mm/sec. Power requirement 15 kW. Weight 3200kg. Height 3150mm, Length 1750mm, Width 1150mm. Technical condition of the machine very good. The machine after a general overhaul. It is possible to make a visual inspection and check the machine in motion.

Year of construction: 1970, Condition: good (used), A used Richter- IWK crank press with deep drawing cylinder. The machine is equipped with a deep drawing cylinder. Fshxshbq D Teya R Tjgb Pressure force of the cylinder approx. 12.5 to. The machine is offered with 6 months warranty. Price on request

Condition: new, This 60 ton motorized workshop press has a movable cylinder (left-right) and a height-adjustable work table. Equipped with pressure control, 2 speeds, a joystick and a hand pump for precise pressing tasks. Fgohxyewfcq Noa R Teb Made in Europe 60 ton workshop press electrically operated, manuf. RHTC – type M/H-M/C-2 This 60 ton motorized workshop press has a movable cylinder (left-right) and a height-adjustable work table. Equipped with pressure control, 2 speeds, a joystick and a hand pump for precise pressing tasks. The workshop press is produced in the Netherlands. Features Sliding cylinder (left-right) Integrated pressure gauge Pressure regulator Two-speed hydraulic unit Height-adjustable work table Joystick for cylinder operation Hand pump for precise press work Options: Foot pedal or hand remote control for operating this 60 ton workshop press V-block set for additional support

Condition: new, Year of construction: 2025, pressing force: 500 t, table width: 1,700 mm, table length: 2,300 mm, Equipment: safety light barrier, COUNTRY OF ORIGIN: Türkiye WARRANTY PERIOD: 2 (TWO) YEARS DELIVERY TIME: IMMEDIATE DELIVERY FROM STOCK H TYPE HYDRAULIC PRESSES GENERAL SPECIFICATIONS o Steel construction body and parts with stress / welding tension removed by vibration method o PLC control and touch panel o Argon application for fixing elements and steel drawn pipes o EN ISO 15614-1 / 2017 welding application certificate which has been approved by TURK-AK and passed WPQR and WPS approval. (by certified engineers according to EN ISO 14731) o Parallelism and vertical tolerance are applied according to ISO and DIN norms. (≤ 120 microns/meter) o PARKER or REXROTH hydraulic unit o SIEMENS / SCHNEIDER in switchear components o Automatic central lubrication system o Two-hand operation Cooling system 500 TON H TYPE HYDRAULIC PRESS TECHNICAL SPECIFICATION – EHP TYPE H Type Steel Structure with 8 Guided Working Table BODY MATERIAL St52 SLIDE BEDS Bronze Zr14 CAPACITY (RAM) 500 TONS MAIN TABLE SIZE 1700 x 2300 mm MOVING TABLE (RAM) SIZE 1700 x 2300 mm HORIZONTAL PRECISSION 120 micron/mt. PERPENDICULAR PRECISSION 60 micron/mt. STROKE (RAM) 350 mm MIN. OPENING HEIGHT 600 mm MAX. OPENING HEIGHT 950 mm STRESS RELIEF afer WELDING By high frequency vibration technology WELDING APPLICATION - EN ISO 15614-1 / 2017 welding application certificate which is WPQR and WPS approved by TURK-AK. (Welding applications are inspected by engineers certified according to EN ISO 14731) MAX. PRESSURE 250 Bar ENGINE POWER 37 kW – IE3 PUMP FLOW RATE 100 cm³ – REXROTH FREE FALLING SPEED 130 mm/sec. PRESSING SPEED 10 mm/sec. ASCENDING SPEED 180 mm/sec. MAIN CYLINDER DIAMETER Ø 360 mm – Ck45 – 2 pc. SHOCK ABSORBING CYLINDER Ø 120 mm – Ck45 – 4 pc. AUXILIARY CYLINDER NUMBER 2 pcs. PRESS HEIGHT 5000 mm PRESS DEPTH 3950 mm Fohxya Rjvx E Ths Tjgb PRESS WIDTH 2600 mm TABLE HEIGHT FROM FLOOR 1300 mm PRE-FILLING VALVE NG 200 – hawe HYDRAULIC UNIT REXROTH WET COOLING EXCHANGER CIESSE OFF-LINE FILTRATION REXROTH CIRCULATION PUMP AND MOTOR 3 kW ENGINE USED IN THE UNIT IE3 LEVEL INDICATOR REXROTH FAN COOLING REXROTH – 10 MICRON PRESSURE FILTER REXROTH – 10 MICRON RETURN FILTER REXROTH – 25 MICRON OIL AND HEAT INDICATOR REXROTH USED VALVES REXROTH FILTER POLLUTION WARNIG ELECTRONIC CONTROLLED LUBRICATION AUTOMATIC – ADJUSTABLE ON THE SCREEN RAM STROKE ADJUSTMENT ADJUSTABLE ON THE SCREEN RAM TONNAGE ADJUSTMENT ADJUSTABLE ON THE SCREEN SYSTEM ERROR INFORMATION ADJUSTABLE ON THE SCREEN PRESS CONDITION INFORMATINON ADJUSTABLE ON THE SCREEN MOLD MEMORY ADJUSTABLE ON THE SCREEN HYDRAULIC FORGET OIL TEMPERATURE INFORMATION ADJUSTABLE ON THE SCREEN LINEAR TRANSDUCER NOVATECHNIK or TURCK TEMPERATURE SENSOR PT100 4.20 mA. ORDEL or REXROTH PLC DELTA TOUCHSCREEN DELTA KTP 7 '' ELECTRICAL COMPONENTS SIEMENS – SCHNEIDER SAFETY PLC SIEMENS FAILSAFE SAFETY LIGHT CURTAINS KEYENCE, LEUZE, PILZ or SICK – 2 pcs. PARKİN CYLINDER PNEUMATIC – 1 pc. APPROXIMATE WEIGHT 36 TONS

Condition: good (used), Year of construction: 2002, operating hours: 15,000 h, Functionality: fully functional, For sale: 1 used automatic punching press incl. gripper feed unit Manufacturer: Mabu Pressen AG type: 32HSS Gripper feed unit: RC11 YEAR OF MANUFACTURE: 2002 Operating hours: approx. 15,000 Compressive force: 320KN Number of strokes: 100 - 1000 Stroke adjustment: 5 - 40 Mass: 6.200Kg For further technical data see type plate and photo documentation. incl. complete documentation. Fohxyetttcdea R Tegb More pictures and video on request. The punch can be inspected in our warehouse in 09599 Freiberg.

Condition: new, pressing force: 30 t, cylinder stroke: 300 mm, - Capacity: 30 tons - Cylinder stroke: 300 mm - Working width: 700 mm - Pressure gauge - Emergency stop Fgshxyaowd I Hto R Teb - 400V

Condition: excellent (used), Year of construction: 1986, Functionality: fully functional, total height: 3,050 mm, total width: 1,750 mm, total length: 1,150 mm, pressing force: 40 t, table width: 630 mm, table length: 500 mm, operating speed: 100 mm/s, overall weight: 3,200 kg, reverse speed: 450 mm/s, ram plate width: 450 mm, ram plate length: 380 mm, ram stroke: 500 mm, distance between stands: 800 mm, oil tank capacity: 300 l, Equipment: documentation/manual, Hydraulic press PYE 40 S1/M with ejector. Year of manufacture 1986. Manufacturer VEB Wema Zeulenroda (Germany). Machine after general overhaul. Piston seal replaced. Parameters: Maximum pressing force 40 tons. Working pressure 16 MPa. Upper table 380 x 450 mm. Lower table 500 x 630 mm. Clearance 800 mm. Cylinder stroke 500 mm. Down speed 100 mm/sec. Fgohxyajwbt Uqj R Tob Up speed 450 mm/sec. Ejector stroke 200 mm. Ejector force 16 tons. Power demand 13 kW. Weight 3180 kg. Height 3050mm, Length 1750mm, Width 1150mm. The technical condition of the machine is very good. The machine has been overhauled. It is possible to inspect and check the machine in motion.

Condition: new, Year of construction: 2024, Hydraulic press MECAMAQ / C-frame series / 40 tons / type (PCC40) Technical specifications: - 40T force, activated by 1 double-acting cylinder (Ø130/Ø80). - Dimensions of the lower plate 600x450mm, with "T" slots M12 (DIN650). - End of the piston rod mechanized for the attachment of Ø40x40mm tools. - Maximum opening 500mm. - Stroke of the hydraulic cylinder 250mm. - Outreach 250mm. - Hydraulic system with 2 speeds and automatic change of high speed by pressure activated by gear pumps. - Monitored hydraulic valves and hydraulic components installed on the machine according to hydraulic diagrams EN693 "Hydraulic system self-monitoring for hydraulic presses with downward stroke". - Maximum pressure of the hydraulic unit 300 bar. - Approach speed 28mm/s. - Working speed 7.5mm/s. - Retraction speed 45mm/s. - Motor power 4 HP (3ph. 400v 50Hz). - Stroke regulation by means of limit switches, with automatic retraction movement. - Pressure switch for maximum pressure regulation, with automatic retraction movement. - Activation of the machine by means of two-hand safety activation CAT.4. Fgehsuhchcoxya R Tsb - LED lighting in the work area - Fixed side guard. - Machine color blue RAL5021 Scope of delivery: - User manual in ENGLISH with technical data for machine maintenance, machine in accordance with CE regulations. - The quoted price does not include any additional protective measures such as safety guards, fences, barriers, etc.; these must be taken into account depending on the location and specific working conditions.

Condition: as good as new (ex-display), Year of construction: 2020, operating hours: 10 h, Functionality: fully functional, CrimpOne C1-140B - Battery-Powered Hydraulic Hose Crimper Technical Specifications Max. crimping force: 1400 kN Crimp range: 10 - 61 mm Max. hose size: 1 1/4 inch Die type: 140 Max. opening: +25 mm Max. die length: 80 mm Servo motor: 1.6 kW Power supply: 12 V (DC) Crimps per hour: 250 pcs Length: 460 mm Width: 280 mm Height: 370 mm Weight: 85 kg Noise level: 71 dB(A) Fehxya Rsv Tlads Tegb In stock, available immediately!

Condition: used, Year of construction: 2001, table width: 2,000 mm, table length: 2,066 mm, installation height: 1,710 mm, pressing force: 1,000 t, ram stroke: 900 mm, controller manufacturer: SIEMENS, controller model: S7-400, power: 160 kW (217.54 HP), overall weight: 1,40,000 kg, lifting height: 900 mm, worktable length: 2,066 mm, distance table to ram: 1,700 mm, tool height: 1,710 mm, CONTROLS .. PLC SIEMENS S7-400 PRESS DESIGN .. drive system: hydraulic .. number of suspensions: 1 .. slide ejectors / cushion: no .. table cushion: no .. opening in table: no .. feedstock transport direction: back-front Fohxyajurcmno R Tegb PRESS FORCES .. total force (nominal): 1000 to PRESS TABLE .. table surface (left-right): 2066 mm .. table surface (front-back): 2000 mm .. height above floor level: 630 mm SLIDE .. stroke: 900 mm SLIDE (HYDR. PRESS) .. approximation velocity max.: 600 mm/s .. working velocity min.: 15 mm/s .. working velocity max.: 40 mm/s .. return velocity max.: 390 mm/s .. return force: 100 to TOOL ASSEMBLY DIMENSIONS .. shut height (stroke down, adjustment up), BDC: 1710 mm .. distance table - slide max.: 1700 mm ELECTRICAL SPECIFICATIONS .. total power consumption: 160 kW .. mains voltage: 400 V .. mains frequency: 50 Hz DIMENSIONS / WEIGHTS .. height above floor level: 6500 mm .. total weight approx.: 140000 kg ATTACHMENTS (PRESSES) .. press automation: yes .. gripper transfer system: yes .. acc. to actual accident protection regulation: yes .. European CE standards: yes Complete hot forming line (sheet metal applications) consisting of: * 1000 to. hydraulic press LASCO * Schwartz furnace system: - max. lining width: 1700 mm - Furnace length: 27060 mm * Strothmann feeder * ABB loading and unloading robot

Condition: used, Single-column hydraulic press SCHÖN type TES/C Year of manufacture 1977 Pressing force 63 tons (160 bar) Thrust 320 mm Table size 600 x 770 mm Ram surface 600 x 400 mm Ram stroke 125 mm Max. installation height 400 mm (with intermediate plate on the ram) Rapid downward traverse speed approx. 180 mm/sec. Rapid working speed approx. 25 mm/sec. Rapid upward traverse speed approx. 180 mm/sec. Table height above floor: 870 mm Drive power: 22 kW Power supply: 380 volts, 50 Hz Tank capacity: approx. 280 liters of hydraulic oil - Adjustable fixed stop - Electric two-hand operation - Intermediate plate on the ram: L x W x H 500 x 500 x 50 mm Space requirement: L x W x H 2400 x 1100 x 2750 mm Fgehsv Tp D Toxya R Tjb Weight: 4 tons Good condition

Condition: used, Year of construction: 2013, Press capacity: 160 ton Ram stroke adjustable: 12 - 120 mm Slide adjustment: 100 mm Shut height (stroke down, adjustment up): 420 mm Table surface area : 2.000 x 1.200 mm Slide area: 2.000 x 700 mm Hole in table: 1.910 x 300 mm Number of strokes: 30 - 300 s.p.m. Required power: 57 kW Weight of machine approx.: 39 ton Standard configuration Dreher roll feeder Extended machine accessories Fohsv Tvg Uoxya R Tjgb

Condition: used, machine/vehicle number: 248, Spotting and test press, including magnet Fehxswdmwdeya R Tsgb adjustable depth stop.

Condition: like new (used), Year of construction: 2023, Here are the technical data of the machine on offer: If the press does not exactly match your requirements, please request an individual offer tailored to your needs with one click: Contact us for an individual offer HIDROBRASIL manufactures presses tailored to your needs at surprisingly low prices! ##### Technical data + information: HB 2025-A-013, Hydraulic 150 T portal straightening press with 3000x1500 mm table size Assembly press with up to 150 T output at 300 bar a) Robust machine frame, b) Valves from PARKER, AGRO-HYTOS, HAWE c) Control cabinet technology from renowned manufacturers d) Pump from AGRO HYTOS or PARKER e) Table size of the press table 3000x1500mm f) Table height 800 mm, from hall floor g) Emergency switch h) Maximum distance between table top and press piston 700 mm i) Cylinder travel 450 mm j) Front open width between the bridge stands 1550 mm k) Travel range of the pistons from left to right 1000 mm Fgjhxyaov Dtt Te R Teb l) Travel of the bridge from the front to the rear would be 2500 mm m) Motor power 4 KW n) Oil tank for 100 L hydraulic oil o) Pressing pressure adjustable from 15 to 150 T using rotary control p) Travel speed downwards 7.5 mm mm, upwards 10 mm second q) Starting pressing speed 2.3 mm r) Total height approx. 2750mm s) Total width approx. 3000 mm t) Total length approx. 3000 mm u) Operation via a hand lever on the bridge v) Total weight approx. 5000 kg w) CE declaration and German-language documentation ##### Are you looking for a machine that fits your needs? Contact us for an individual offer. Our hydraulic presses are manufactured in accordance with German machinery directives, European machinery directives (Directive 2006/42/EC), EC standards and EU safety regulations. Furthermore, our presses exceed Canadian and European safety requirements, as they comply in all respects with the national Brazilian safety directive NR 12, which is based on these. Our great strength is special machine construction and press automation. We sell customized hydraulic presses, press brakes and shears at surprisingly low prices. The hydraulics of the presses are mainly made using components from leading European manufacturers.

Condition: like new (used), Year of construction: 2020, operating hours: 10 h, Functionality: fully functional, machine/vehicle number: C1-140_1, CrimpOne C1-140 Hydraulic Hose Crimper Technical Specifications Max. crimping force: 1400 kN Crimp range: 10 - 61 mm Max. hose size: 1 1/2 inch Die type: 140 Max. opening: +25 mm Fjhxev Tk T Neya R Tjgb Max. die length: 80 mm Servo motor: 3 kW Power supply: 380 V Crimps per hour: 850 pcs Length: 600 mm Width: 435 mm Height: 630 mm Weight: 135 kg Noise level: 71 dB(A) Available immediately from stock!

Condition: new, Year of construction: 2025, throat depth: 280 mm, ram adjustment: 85 mm, drop-through hole in table: 190 mm, table width: 540 mm, table length: 740 mm, stroke adjustment: 100 mm, pressing force: 80 t, table height above floor: 755 mm, ram bore: 40 mm, power: 7.5 kW (10.20 HP), punching force: 80 t, Equipment: safety light barrier, A TYPE ECCENTRIC PRESSES GENERAL FEATURES  Steel construction body,  Stress relief will be applied to the body and welded parts with vibration.  Parallelism and perpendicularity tolerance between tables in accordance with ISO and DIN standards  Pneumatic clutch and brake combination – OMPI-Italy  Ram supported by 8 slides  Parts such as ram, connecting rod, claw are cast steel, GS52  High strength solid crankshaft – 4140  Inside of connecting rod will be bronze, (Zr14)  With spare table,  With hydraulic fuse  Ratchet apparatus table-ram adjustment  Automatic central lubrication,  Pneumatic pedal with ratchet and double hand control with time adjustment,  With electric counter,  PLC application and touch screen – DELTA  Electrical switchgear materials – SIEMENS-SCHNEIDER  Double coil safety valve – GPA, TOPAIR  Locked position switch and panel,  OPTIONAL FEATURES  CE application  Finger protection beam barriers – SICK, LEUZE, KEYENCE  Security PLC (Controls the entire electrical system, valve, double and pedal) – PILZ  Safety wedge,  Protective enclosures will be within the scope of CE.  Speed Control Application  Automatic Lubrication System BODY A TYPE MONOBLOCK BODY TYPE A SERIES Capacity 80 Tons Throat Depth 280 Mm Table-Ram Distance 400 Mm Slide-Table Distance 420 Mm Wall Distance 470 Mm Ram Adjustment 85 Mm Press Width 1000 Mm Fgohxyaevxtgis R Tob Press Depth 1735 Mm Press Height 2300 Mm Front Anchor Dimension 720 Mm Side Anchor Dimension 1040 Mm Table Hole Diameter 190 Mm Table Size 540 / 740 Mm Mold Clamping Housing Diameter 40 Mm Ram Size 370 / 230 Mm Floor Table Dimensions 755 Mm Stroke Adjustment 10 / 100 Mm Stroke Number/Minute 50 Units/Min. Motor Power 7.5 KW Motor Speed 1450 RPM Weight 4,500 Kg ROLL UNCOUNTER AND ROLL DRIVER WILL BE PRICED EXTRA IF REQUESTED. IT IS NOT INCLUDED IN THE PRICE OF THE PRESS.

Condition: used, Single-column eccentric press BERRENBERG Type EPtG 20-325 N-0 Mach. No. 15342, Year of manufacture 1974 Pressing force 20 tons Projection 320 mm Table surface 550 x 350 mm Through hole in table 190 x 120 mm Push surface 305 x 140 mm Table intermediate plate L x W x H 540 x 340 x 55 mm Through hole in table intermediate plate Ø 103 mm Clamping pin bore Ø 40 mm Stroke adjustment 8 - 70 mm Push adjustment 35 mm Fgshxsv Tp D Hoya R Teb Installation height max. 345 mm (without table intermediate plate) Installation height max. 290 mm (with table intermediate plate) Table height above floor 700 - 750 mm (without table intermediate plate) Stroke rate 100 to 180 strokes/min. Drive power 1.5 kW Power supply 380 V, 50 Hz - Pneumatic clutch-brake combination, manufacturer: ORTLINGHAUS - Electric foot switch and two-hand operation - Stroke rate continuously adjustable via variator drive - Table height adjustment via threaded spindle approx. 150 mm - Manual central grease lubrication BEKA Schmiertechnik - Height-adjustable press table via threaded spindle - Electrical diagram Space requirement L x W x H 1600 x 850 x 1950 mm Weight 1250 kg Good condition

Condition: used, Year of construction: 2009, Press capacity: 160 ton Ram stroke adjustable: 12 - 120 mm Slide adjustment: 100 mm Shut height (stroke down, adjustment up): 420 mm Table surface area : 1.600 x 1.200 mm Slide area: 1.600 x 700 mm Hole in table: 1.510 x 300 mm Number of strokes: 30 - 300 s.p.m. Required power: 51 kW Weight of machine approx.: 32 ton Standard configuration Dreher roll feeder Fshxjv Tvgneya R Togb Extended machine accessories

Condition: used, Horizontal press; 1t, with thorns for expanding the pipe inlet. Fgjhxjtrgafsya R Teb

Condition: like new (used), Year of construction: 2024, Here are the technical data of the machine on offer: If the press does not exactly match your requirements, please request an individual offer tailored to your needs with one click: Contact us for an individual offer HIDROBRASIL manufactures presses tailored to your needs at surprisingly low prices! ##### Technical data + information: HB 2025-A-011 Hydraulic 80 T assembly/disassembly press with 1750x1000 mm table size Gantry press with up to 80 T output at 300 bar a) Robust machine frame, b) Valves from PARKER, AGRO-HYTOS, HAWE c) Control cabinet technology from renowned manufacturers d) Pump from AGRO HYTOS or PARKER e) Table size of the press table 1750x1000mm f) Table height 800 mm, from hall floor g) Emergency switch h) Maximum distance between table top and press piston 500 mm i) Cylinder travel 450mm j) Front open width between the bridge stands 1050 mm k) Travel range of the pistons from left to right 730 mm l) Travel range of the bridge from front to back would be 1100 mm m) Motor power 4 KW n) Oil tank for 100 L hydraulic oil o) Pressing pressure adjustable from 8 to 80 T using rotary control p) Travel speed downwards 8.5 mm, upwards 10 mm per second q) Starting pressing speed 4.3 mm r) Total height approx. 2300 mm s) Total width approx. 2000 mm t) Total length approx. 1750 mm u) Operation via a hand lever on the bridge v) Total weight approx. 1800 kg w) CE declaration and German-language documentation ##### Fgjhxyasv Df H Eo R Tsb Are you looking for a machine that fits your needs? Contact us for an individual offer. Our hydraulic presses are manufactured in accordance with German machinery directives, European machinery directives (Directive 2006/42/EC), EC standards and EU safety regulations. Furthermore, our presses exceed Canadian and European safety requirements, as they comply in all respects with the national Brazilian safety directive NR 12, which is based on these. Our great strength is special machine construction and press automation. We sell customized hydraulic presses, press brakes and shears at surprisingly low prices. The hydraulics of the presses are mainly made using components from leading European manufacturers.

Condition: ready for operation (used), Hydraulic Press, Four-Column Hydraulic Press, 100 t Press, Hans Schoen SH, Used Machine Manufacturer: Hans Schoen Model: SH 3085 Pressing Force: 100 t, 1000 kN Overall Dimensions: 2000 x 1500 x 2900 mm Table Size: 660 x 580 mm Press Plate Size: 600 x 400 mm Stroke: 150 mm Clearance: 550 mm Fehxjugr N Tsya R Tegb Electrical Specifications: 18.5 kW Year: 1982 The press operates with an integrated hydraulic system, equipped with an efficient cooling system to ensure long-term, reliable performance. This machine offers an excellent solution for industrial needs, especially when a strong and reliable press is required.

Condition: ready for operation (used), Paneelpers met 2 verwarmde tafels Tafelafmetingen: 3200 x 1700 x 50 mm Tussen kolommen: 1700 mm Maximale afstand tussen tafels: 150 mm Fohxya Rswaityo Togb perssnelheid: 1,4 mm/sec retoursnelheid: 105 mm/sec sluitsnelheid: 105 mm/sec 6 zuigers - diameter van de zuiger: 200 mm - slag: 150 mm Gewicht: 19 ton Furnierpressen - Transportpers - Composietpers - Heizplattenpressen

Condition: used, Price: On request Mandrel pipe tube bending pipebending machine Manufacturer:AMGA Max. bending capacity: 60mm Supply: 5000mm Including tooling and peripherals Fgehxyaov Umgne R Tsb - Documentation available: No Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Bram van Summeren

Condition: ready for operation (used), total height: 3,200 mm, total length: 1,200 mm, passage width: 570 mm, retraction speed: 19 mm/s, load capacity: 1,00,000 kg, net weight: 2,500 kg, total depth: 1,350 mm, Pistondia: 200 mm Fitted with a system for induction heating! Max ram adjustment: 600 mm Fshxya Rjwaitto Tsgb Drawning speed: 1,75 mm/sec Distance between table -- ram: 1100 mm Table area: 550 x 550 mm

Condition: used, operating hours: 939 h, Mandrel bender, mandrel bending machine, pipe bender Model: Conventional Fshxyev Ul U Dja R Tegb Manufacturer: Mewag Type: RB 42 S Max. capacity: 42mm Max. wall thickness: 2mm Max. bending angle: 185g rFeed length: 1500mm Including bending tools! Machine dimensions: 1200x800x1400mm Machine weight: 350kg - Documentation available: No - Operating hours: 939 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Bram van Summeren