Used saws (window production) for sale (134)

Year of construction: 1992, condition: good (used), Aluminum circular saw, chop saw, glazing bead saw, aluminum saw,machine Kwjdoif Azfjpfx Adwet -Manufacturer: Alfred E.Gohl, glass bead saw type GLS -Saw blade: Ø 225x2.0x32 mm -Drive: 1.1 kW -Speed: 3000 rpm -Dimensions: 1100/650/H1350 mm -Weight: 152 kg

Year of construction: 1980, condition: good (used), Underfloor circular saw, cross-cut saw, pull saw, chop saw, sliding table saw, table saw, circular saw -Transfer: in the current state as viewed Kwjdpfxsf D H Hbe Adwst -Table extension: do-it-yourself -Manufacturer: Ulmia, circular saw type 1612SP -Motor power: 2.2 kW / 2800 U/min -saw blade: Ø 280 mm -max. cutting height 70 mm -Miter cut: up to 45 ° -Length stop: up to approx. 800 mm -Dimensions 1000/1340/H980 mm -Weight: 306 kg

Condition: used, Underfloor circular saw, crosscut saw, pull saw, chop saw, sliding table saw, table saw, circular saw, precision circular saw -Manufacturer: Rapid, table saw saw unit: 45° pivotable -Type: Pk 100 -Motor power: 2.5 kW / 2850 rpm -Saw blade: Ø 175 mm, (max. Ø 300 mm) -Cutting height 37 mm with saw blade Ø 175 mm (max. ca. 100 mm) -Cutting width: 350 mm -Miter cut: up to 45° -Dimensions 940/860/H1390 mm -Weight: 162 kg Kwsdpfsm Sk H Iex Adwjt

Year of construction: 1960, condition: good (used), Underfloor circular saw, crosscut saw, pull saw, chop saw, sliding table saw, circular table saw, circular saw -Manufacturer: Ulmia, table saw type 1610 -Motor power: 1.1 kW / 2820 rpm -Saw blade: Ø160 mm, max. Ø240 mm -Max. Cutting height 30 mm -Length stop: up to 245 mm -Dimensions 720/570/H960 mm -Weight: 139 kg Kedpfxomzkhkj Adwewt

Year of construction: 1979, condition: good (used), Underfloor circular saw, crosscut saw, pull saw, miter saw, panel saw, table saw, aluminum circular saw, panel saw -Manufacturer: Martin, panel saw type T 70 with automatic feed -Engine power: 11 kW -Speed: 1445 rpm Kedpfshfufgsx Adwowt -Saw blade: Ø 410 x 5 mm -max. Cutting height: 90° 140 mm / 45° 110 mm -Miter cut: up to 45° -Sliding table: 355 x 1500 mm -Dimensions total 2275/2010/H1400 mm -Weight: 1058 kg

Condition: good (used), Crosscut saw, pull saw, miter saw, plunge saw -Remark: Unit made of slats/blinds production, without control -Saw blade: Ø 188 mm Kwsdpfx Ajp Dydqjdwet -Individual components: see photos -Dimensions: 1390/620/H1130 mm -Weight: 576 kg

Condition: good (used), Crosscut and miter saw, pull saw, crosscut saw, panel saw, crosscut and miter saw, radial saw, radial arm saw -Manufacturer: Elu, cross-cut and miter saw with table on solid base, mobile -Type: MGS 72 -Motor power: 0.85/1.2 kW -Speed: 1050/2100 rpm -Saw blade: Ø 305 mm -Cutting height: max.110 mm -Cutting width: max. 120 mm -Miter. 45° on both sides -Dimensions: 2100/840/H1180 mm Kjdjpcmthspfx Adwowt -Total weight: 190 kg

Condition: good (used), Roller conveyor, conveyor track, roller conveyor belt, roller track, saw roller block, saw roller block, saw horse, saw roller conveyor, length stop, longitudinal stop, saw stop, material stop, motorized length stop, controlled length stop, roller conveyor, conveyor track, roller conveyor belt, roller track -Length stop for: saws -with: stop by hand in longitudinal direction -with: Side stop movable via hydraulic motor in transverse direction -Display via: SIKO mechanical position indicator Kwjdod D R Syepfx Adwjt -Roller conveyor: Ø 80 x 1340 mm -max. stop length: 2950 mm -Roll spacing: 300 mm -Dimensions: 3000/1640/H940 mm -Weight: 534 kg

Year of construction: 2017, condition: good (used), Assembly table for all assembly work on windows and doors. The movable and extendable work surfaces allow for absolutely safe handling of frames in all sizes as well as very large structures. Kwodpfeycknpsx Adwot Height-adjustable feet The height-adjustable feet ensure precise adjustment of the working surface to the desired height and perfect alignment. In addition, the table can be fixed to the floor using the pre-drilled holes. The work surfaces are covered with soft, non-slip PVC, which allows frames to rest securely. A storage shelf enables easy and organized storage of small parts for quick access and clear arrangement of tools and components. Quick-connect couplings provide easy supply of compressed air. Adaptation to any frame size is ensured by both the horizontally movable support plates and the roll-mounted, extendable support plate, allowing for a highly flexible enlargement of the working area.

Condition: good (used), saw blade diameter: 360 mm, Sliding saw / Mitre saw / Chop saw / Radial saw Wegoma zs 135 Ksdpfxjyckbio Adwewt Mitre saw type ZS135 -Motor power: 2.2 kW -Saw blade: Ø 360 mm, swiveling

Year of construction: 2017, condition: like new (used), functionality: fully functional, Stop system with profile support, stop positioning via handwheel, and position display on a digital readout. Digital Readout: The digital readout, in combination with the handwheel, enables simple and precise positioning of the stop, ensuring accurate cuts. The digital display also allows reprogramming of the machine zero point and directly shows the stop dimension, which corresponds to the length of the workpiece to be cut. Handwheel: Kedpfx Adeyci Nfjwowt The handwheel is used to move the stop precisely into position. Reference Stop: Carriage runs on ball bearings and is operated via a mechanically controlled kinematic system, allowing for accurate realization of the desired workpiece length relative to the center of the saw blade.

Year of construction: 2017, condition: like new (used), Single-head mitre saw SCA Mini P with bottom-up saw blade, infeed side left, for mitre cuts from 15° left to 15° right, including intermediate angles. Compact, semi-automatic under-table circular saw with pneumatic saw blade feed. Chip collection drawer: Thanks to a practical chip drawer, machining waste can be conveniently collected. This keeps the machine and the working area clean. Clamping devices: The technically advanced horizontal and vertical clamping systems provide exceptional workpiece stability during clamping and allow for quick re-clamping. Due to these features, this machine is perfectly suitable for window and door manufacturing. Operation: The operator panel makes use of the machine simple and intuitive. The ergonomic lever with scale allows for fast angle adjustment of the saw blade. An additional adjustment system allows for setting the clamping pressure and speed of the saw blade feed. Cutting area: The robust support table, in combination with a cross stop, ensures optimal positioning of the workpiece and guarantees high precision of the sawn cross-section. Materials: Aluminium / Wood / Non-ferrous metals Automation: Semi-automatic, two-hand operation Kwjdpfxsych Ruj Adwot Saw blade diameter: 400 mm Max. round cutting area: approx. Ø 150 mm Max. rectangular cutting area: approx. 130 × 180 mm / 30 × 270 mm Mitre angle adjustment: –15° to +15°

Year of construction: 2014, condition: like new (used), functionality: fully functional, Double mitre saw with 5 NC axes suitable for aluminium and light metal alloys, featuring automatic movable head adjustment and electronic control of all angles from 22°30' (internal) to 45° (external), with a fine-resolution of 280 positions per degree. The 600 mm saw blades offer two different feed modes. The standard feed optimises the cutting chart vertically for profiles taller than 450 mm. The radial mode utilises an extended stroke beyond the vertical reference plate, producing a large cutting chart horizontally for profiles up to 240 mm wide. Accessories: - Pro software package: Overlength / Shortcut / Cross-cut / Wedge cut Kjdpsycht Njfx Adwowt - Pneumatic profile supports - Data import from external software (LogiKal / Schücal / MAP / TXT / Excel, etc.) - Additional clamps - Additional material support - Short part clamp for automatic and semi-automatic cutting - Additional clamp on roller conveyor - Motorised feed - Safety hood with adjustable opening width for improved noise and dust protection The saw has extremely low operating hours and cutting cycles! It is in excellent condition. Only 13,000 cuts and 900 operating hours! Twin-head cutting-off machine with 5 NC axes for aluminium and lightweight alloys, with automatic mobile head movement and electronic management of all angles from 22°30’ (internal) to 45° (external) with a resolution of 280 positions per degree. The 600 mm saw blades have two distinct feed modes. Standard feed optimises the cutting chart in the vertical direction for cutting profiles over 450 mm in height. The radial mode utilises a large stroke beyond the vertical reference plate, generating a large cutting diagram horizontally for profiles up to 240 mm wide.

Condition: like new (used), Year of construction: 2019, functionality: fully functional, cutting length (max.): 10,000 mm, feed length X-axis: 5,000 mm, saw blade diameter: 500 mm, air pressure: 6 bar, Emmegi Classic Magic 500 5 Meter Electronic double mitre saw with automatic feed of the movable cutting head, driven by a brushless motor with numerical control system. Pneumatic control of the angle adjustment in three fixed positions: 90°, 45°, and 22°30' (external), or via a mechanical system for manual adjustment of intermediate angles. Hydro-pneumatic feed of the saw blades. Swivelling heads: the rotation of the heads around the horizontal axis is performed by pneumatic cylinders, with adjustable angles ranging from 90° to 22°30' (external). Intermediate angles are set using special manually adjustable stops. The mobile units are equipped with integrated pneumatic drop-down safety devices for the working area. Pneumatic intermediate support The pneumatic intermediate support is particularly useful when cutting lightweight profiles of considerable length. In such cases, the pneumatic support automatically provides ideal support for the profile. Additional clamp for profile support on roller conveyors After each cut, the remaining short profile section tends to fall onto the roller track, posing the risk of coming into contact with the saw blade edge while the cutting phase is ongoing. This movement can potentially damage both the workpiece itself and the freshly cut section. The additional vise installed on the roller conveyor prevents this issue by securely holding the profile throughout the entire cutting operation. Year of manufacture: 2019, as new! The saw has barely been used and protective film is still present on the printer and scales! As the saw unfortunately does not have a cut counter, it is not possible to state exactly how many cuts have been made. However, it is immediately apparent upon inspection that the saw is virtually as new and has seen very little use. It was used by the previous owner solely for training purposes! LCD display with backlighting Prepared for connection of an industrial label printer USB port Single-cut operation Storage for 99 profile correction values and automatic calculation of cut length for mitre cuts Storage for 20 cutting lists entered via keyboard (50 sets each) Storage for 10 cutting lists (100 sets each) imported from an external PC via RS232 serial interface MACHINE FEATURES Position detection of the movable unit via direct measuring system with magnetic tape 2 carbide-tipped saw blades, 500 mm diameter Pneumatic full safety covers over the cutting area 2 pneumatic horizontal clamping devices with low-pressure safety system Profile support roller conveyor Lubrication system: mist spray device or minimum quantity spraying device Cuts with saw blades Ø 500 mm in mitre range from 22°30' (external) to 90° Manual profile support Kodpfx Asw Svxlsdwswt Prepared for automatic start of chip extraction system MG4 Two standard profile inserts Metric scale Label printer incl. peel-off function Long cut Shortcut Cross cut Macro Automatic cut Software package pro

Year of construction: 2014, condition: used, functionality: fully functional, Mobile chip extractor MG4, sound-insulated and equipped with automatic start. Features an antistatic filter, suitable for extracting aluminum, PVC, and steel chips. Automatic filter cleaning and easy chip container emptying thanks to castors. The VP version is fitted with a control unit featuring a potential-free contact for external activation by the connected machine. The front extraction system comprises two cast aluminium suction ports, each with a 100 mm diameter. These allow for multiple connections via plastic hoses with metal reinforcement to dust extraction devices mounted on cutting machines, sawing centers, machining centers, and PVC machinery. Ksdjycgtbspfx Adwjwt Accessories include adapters reducing to 70 mm, a Y-connector, and approximately 14 meters of extraction hose. (Perfectly set up for use with an Emmegi double mitre saw)

Year of construction: 2008, condition: used, functionality: unexamined, Auction: Plant Closure Roschmann, Gersthofen (Augsburg) Place your bid now – Sale to the highest bidder. Kodsx N Niaopfx Adwjwt Lot 2910009: Complete industrial-grade double miter saw system for precise cutting of aluminium or PVC profiles, featuring integrated dust extraction. This robust and reliable setup is ideally suited for use in window, façade, or profile fabrication, where accurate angle cuts and clean operation are essential. Technical Specifications: Double Miter Saw - Manufacturer: Elumatec - Model: DG 244/10 - Power supply: 3~PEN / 400 V / 50 Hz - Motor output: 3.5 kW - Compressed air requirement: 7 bar - Speed: 2,800 rpm - Year of manufacture: 2008 Dust Extraction Unit - Manufacturer: Schuko (H. Schulte-Sudhoff GmbH & Co. KG) - Model: DG 244 - Airflow rate: 1,870 m³/h - Motor output: 2.2 kW - Suction pressure: 1,050 Pa - Power supply: 230/400 V, 50 Hz

Year of construction: 1999, condition: used, Saw blade diameter vertical and horizontal: 500 mm Kwedpfx Adovmz R Sjwjt Max. profile height: 280 mm Max. notch width: 300 mm Max. latch height: 185 mm Max. latch depth: 185 mm Pivoting material stop with locking points and digital display Motorized latch height adjustable with digital display Motorized adjustment of the angles with digital display Hydropneumatic material feed via 2-hand operation Pneumatic material clamps coolant lubrication

Year of construction: 2025, condition: new, New single head saw with up-feed blade Ø 300mm and manual positioning of vertical axis FOM INDUSTRIE PANDA 300 ECHO - Tungsten carbide saw blade Ø 300mm - Hydro-pneumatic feed of saw blade Kjdpsf Nwxwefx Adwowt - Spray mist blade lubrication system - Cutting area guard kit - Two vertical vices - Two horizontal vices - Set up for the extraction of chips and fumes

Year of construction: 2020, condition: as good as new (ex-display), functionality: fully functional, ZAX12372 Single-head saw machine with pneumatic tilting of the heads • Head tilt up to 22.5° right / left (Automatic positioning at fixed angles 22.5° - 45° - 90°) • Head tilt at intermediate degrees, with manual positioning (mechanical stop) • Full guarding • Three-phase motor 400V 50Hz 4kW (inverter-driven) • Saw blade rotation speed 1900 rpm • Provision for chip and fume extraction • Simultaneous start of the vacuum with the start of the saw blade • Saw cut lubrication by spray mist • Widia saw blade Ø 700 mm • 2 pneumatic horizontal clamps • 2 pneumatic vertical clamps Kwjdjya H Dzspfx Adwot • Set of service tools -> optional FOM length stop

Condition: excellent (used), functionality: fully functional, Usable cutting length 4000 mm Blade diameter 550 mm Electronic head tilting Internal/external tilting from 22°30′ to 135° Ksdjxvhiiepfx Adwewt Labeling machine

Year of construction: 2022, condition: like new (used), functionality: fully functional, For sale: Emmegi Five 300CS glazing and inspection press, ideal for precise glazing and final inspection of window and frame elements. The machine features a self-centering clamping system and robust, scratch-resistant contact surfaces. Reliable technology, user-friendly operation, and compact design. Technical specifications: - Contact surfaces coated with hard, scratch-resistant PVC - Adjustable working surface height: 875–925 mm - Working surface tilt: 0° (horizontal) to 85° - Adjustable clamping force (max.): 660 N - Clamping device opening: 425–2,425 mm - Clamping jaw height (max.): 65 mm - Clamping device with 2 beams, each with 5 adjustable jaws - Beam height: H = 2,060 mm - Self-centering clamping system with retractable clamping beams Kodpfx Adex U Daqswswt - Pneumatic tilting of the roller conveyor in horizontal position - Infeed/outfeed roller conveyor, floor height adjustable: 305–355 mm - Machine length: 3,000 mm - Air consumption: 150 Nl/cycle - Maximum load capacity: 200 kg - Machine weight: 330 kg

Condition: excellent (used), functionality: fully functional, Usable cutting length: 4000 mm Kwjdpfx Aex Ifimsdwot Blade diameter: 500 mm Electronic tilting of the heads Internal/external tilting from 22°30′ to 135° Feeler probe Chip conveyor belt

Condition: like new (used), functionality: fully functional, Year of construction: 2022, operating hours: 400 h, Automatic cutting line automatic loader 7000 mm Kjdsxv Evtepfx Adwjwt cut-off saw with 650 mm blade electronic tilt left/right automatic unloader 3500 mm waste conveyor belt labelling machine

Condition: good (used), Year of construction: 2009, Comparable to Elumatec, Mecal, Fom, Pertici, etc. Ideal for processing insect screen systems! For saw blade diameter 500 mm, cutting length 5000 mm. Double mitre saw with pneumatically outward swiveling heads, designed for cutting aluminium and PVC profiles. The right, movable saw unit positions itself automatically to the profile length entered in the control panel. Scope of delivery includes all necessary safety devices as well as vertical and horizontal clamping devices. Head Swiveling The heads are swiveled via pneumatic cylinders. Mitre cuts can be made from 90° to 22.5° outward. Intermediate mitre angles can be set manually using a stop device. The cutting area is equipped with automatically opening and closing safety covers. Ksdoxgpvrepfx Adwswt Profile support roller conveyor at the movable unit with clamping device Spray misting system with macro function A compatible extraction unit is also currently available as an option!

Condition: new, Fully automatic sawing and punching or drilling in a single machine! Suitable for a wide range of applications, especially in the photovoltaic and automotive industries. Compatible with Ø 500 or 550 mm saw blades, reversible mechanism for cut lengths up to a maximum of 4000 mm. Saw-Punching Automation System Profilma 502 ST-V • For aluminium and plastic profiles • For cutting to length and punching based on the Profilma 502 model • Fully automatic operation and Saw-Drilling Automation System Profilma 502 BG • For aluminium and plastic profiles Kwodpfx Ajx Haftsdwst • Cutting to length, drilling, and thread cutting of up to 4 profiles simultaneously • Fully automatic operation