Used upright drilling machines for sale (74)

Condition: excellent (used), Year of construction: 1985, Column Drilling Machine ALZMETALL AX2 Cone: CM2 Spindle exit: 100 mm Rotation: from 200 to 500 RPM Table size: Length 370 mm x Width 350 mm Year of construction: 1985 Maxi distance spindle nose/table: 480 mm Guodpexu H T Djfx Ah Djk Throat depth: 250 mm 2 R5247921 speeds motor Voltage: 380 V Width: 500 mm Depth: 900 mm Total height: 1700 mm Weight: approx 250 kg

Year of construction: 1987, condition: used, 1 pillar drilling machine ALZMETALL AX 3SV, serial no. 5739, year of manufacture 1987 Guodpfx Aji Apu Teh Dsk

Condition: excellent (used), bore capacity in steel (diameter) 35 / 45 mm throat 330 mm Gedount Rpopfx Ah Deuk bore stroke 200 mm morse taper MK 4 table diameter 600 mm spindle turning speed - stepless 80 - 1800 U/min table adjustment - upper 450 mm spindle stroke 400 mm total power requirement 2,5 kW weight of the machine ca. 1,4 t dimensions of the machine ca. 2,5 x 1,2 x 0,8 m automatic feed.

Year of construction: 1992, condition: excellent (used), machine/vehicle number: 238828, Available: Immediately Guodpfxjpr Uvrs Ah Dek

Condition: good (used), Year of construction: 2020, Drill, pillar drill, column drill, tapping machine -Manufacturer: Bernardo, Gearbox - Pillar Drill Type GB 35 Vario -Spindle mount: MK3 -Motor: 1.5 kW -Speeds: 65 - 460 rpm / 460 - 3250 rpm, continuously variable right-left rotation -Feed: 0.1/0.2/0.3 mm/rev. -Clamping table: 420 x 345 mm / swiveling -Travel: 340 mm -Spindle stroke: 160 mm -Projection: 320 mm -Column Ø: 120 mm -Thread cutting device -Coolant system: 20 l/min -Dimensions: 870/560/H2340 mm Gujdewrbpdspfx Ah Djk -Weight: 401 kg

Condition: new, Year of construction: 2025, The very efficient Cormak 32 column drill is an ideal solution for professional workshops and small-scale production. Equipped with a 1500W two-speed motor with a rotation direction switch for right and left. It has a table height adjustment using a toothed rack. The work table tilts from 0-45 degrees to the left and right. Additionally, the Cormak 32 drill is equipped with a gravity cooling system. The set includes a 150 mm vice and a drill chuck. Technical data Maximum drilling diameter 32 mm Grip capacity 16 mm Spindle to column distance 254 mm Maximum spindle stroke 120 mm MK4 spindle mount Maximum distance of the table from the spindle 595 mm The distance between the pin and the column is 260 mm Maximum distance of the base from the spindle holder 1075 mm Guodperidpwefx Ah Dek Table dimensions 475x425 mm Column diameter 92 mm Motor power 1.5 kW 400V power supply Gravity cooling system Overall dimensions 1670 x 760 x 475 mm Net weight 144 kg Spindle speed range Motor speed Spindle speed (min-1) 1400 min-1 120 200 250 360 400 450 950 1280 1520 1840 2440 3480 700 min-1 60 100 120 180 200 220 470 640 760 920 1120 1740 Standard equipment 1500W two-speed motor Left and right rotations DTR in Polish CE declaration Gravity cooling system Optional equipment feeder

Condition: used, drilling capacity steel/GG: 30/40 mm spindle taper: 3 MK arm length: 350 mm Gjdpfeb Hl H Isx Ah Douk table size: 350 Ø mm spindle sleeve stroke: 150 mm spindle turning speed range: 155; 280; 470 u. 790 rpm carriages: 0,1/0,2/0,3 mm engine: 380 V, 1,1 kW space needed: 950 x 530 x 2300 mm weight: 445 kg

Condition: ready for operation (used), functionality: fully functional, spindle mount: MK 3, total height: 1,800 mm, total width: 500 mm, total length: 600 mm, table width: 500 mm, table length: 355 mm, spindle speed (max.): 3,020 rpm, spindle speed (min.): 100 rpm, type of input current: three-phase, Equipment: type plate available, 3 Phase 380V, 2 speed motor is running fine! Geared head with 8 speeds. Spindle RPM adjustable from 100 up to 3020. MT3 spindle taper. Gujdpfx Ajxl Hpash Dsk Tool ejector. Maximum drilling depth: 130 mm Table size: 500x355 mm Head & table height adjustable. Good working condition! Made in Sweden. Overall dimensions: 60x50x180 cm Contact us for shipping possibilities! € 1,850.00 EX VAT!

Condition: used, Year of construction: 1986, bore capacity in steel (diameter) 32 mm Gjdew En D Iepfx Ah Deuk throat 290 mm bore stroke 180 mm total power requirement 1,9 kW Description to follow!

Condition: good (used), Boorcapaciteit in staal (diameter) 30 mm Boorslag 170 mm Fastening MK 4 Sheet dimensions 750 x 550 mm Toerental 70 - 1750 omw/min Gsdpfx Ajvgb Eioh Deuk

Condition: good (used), Column Drilling Machine ALZMETALL AB3 ESB Spindle: CM3 Rotation: 1 range 220 -800 RPM + 1 range 800-2900 RPM Table size: Length 615 mm x Width 470 mm Spindle travel: 160 mm Throat depth: 280 mm Speed adjustment by belt drive Rotative table at 360° Gujdpfxji Tvv Aj Ah Djk Automatic Descent 3 speeds: 0,006 - 0,12 - 0,18 mm/min. Lubricant pump Voltage: 380 V Width: 800 mm Depth: 1300 mm Total height: 1900 mm Weight: approx 800 kg

Condition: new, Year of construction: 2025, The Cormak 25 column drill is a very efficient column drill, which is standardly equipped with a two-speed 1000 W motor with a rotation direction switch for right and left. The excellent design makes this device work very precisely. It has a table height adjustment using a toothed rack. The work table tilts from 0-45 degrees to the left and right. The set includes a 123 mm vice and a drill chuck. FREE MAGNETIC CHIP COLLECTOR ZW580! Technical data Maximum drilling diameter 25 mm Grip capacity 16 mm MK3 self-locking chuck The distance between the spindle and the column is 216 mm Maximum spindle stroke 80 mm Maximum distance of the table from the spindle 640 mm The distance between the pin and the column is 215 mm Maximum distance of the base from the spindle holder 1136 mm Table dimensions 355x355 mm Column diameter 92 mm Motor power 1000 W Overall dimensions 1635 x 642 x 356 mm Net weight 85 kg Spindle speed range Motor speed Spindle speed (min-1) 1400 min-1 160 240 290 350 410 480 530 590 660 720 1190 1350 1510 1970 2100 3000 Gsdpsridn Sefx Ah Deuk 700 min-1 80 120 140 170 200 240 260 290 330 360 590 670 750 980 1050 1500 Standard equipment 1000W two-speed motor Left and right rotations DTR in Polish CE declaration Optional equipment cooling system feeder

Year of construction: 1984, condition: ready for operation (used), drilling capacity steel/GG: 18/23 mm spindle taper: 2 MK arm length: 250 mm Guodpfxok Tzu Re Ah Dsk table size: 250 x 370 mm spindle turning speed range: 400 - 5000 rpm engine: 0,48/0,6 kW space needed: 750 x 500 x 1670 mm weight: 130 kg

Condition: ready for operation (used), Year of construction: 1967, functionality: fully functional, Infratirea pillar drilling machine / bench drill Includes the drill bits (see picture) and a large machine vice. Gedpfx Ahsw S Udme Djuk Year of manufacture: 1967

Condition: used, bore capacity in steel (diameter) 60 mm throat 400 mm total power requirement 4,4 kW Guodpowftt Isfx Ah Dok weight of the machine ca. 1,7 t

Condition: excellent (used), bore capacity in steel (diameter) 45 mm throat 300 mm bore stroke 160 mm Gedpfxsvn U Umo Ah Deuk taper MK 4 table surface area 600 x 500 mm table adjustable 550 mm total power requirement 0,8 kW weight of the machine ca. 0,5 t dimensions of the machine ca. 0,8 x 0,6 x 1,8 m

Year of construction: 1969, condition: used, Drill press, bench drill, column drill, pillar drill -Manufacturer: TOS, high-performance column drilling machine type 40 TF / C -Motor: MEZ 2.2 kW -Speeds: 56 - 2240 rpm -Table size: 400 x 315 mm, travel 600 mm Guodpfx Ashck U Ish Dsk -spindle taper: MK4 -Spindle stroke: 165 mm -Projection: 290 mm -Pillar Ø: 140 mm -Dimensions: 1200/650 / H1990 mm -Weight: 602 kg

Condition: new, Year of construction: 2025, Thanks to its rigid structure, the drill ensures perfect drilling quality. The tilting table allows for a wide range of processing. The device is equipped with an electronic speed indicator, drilling depth indicator and a movable head. 125 mm vice included. The model is equipped with smooth regulation of spindle speed. Machine description smooth regulation of spindle speed LED lamp work table and base equipped with T-slots solid, torsion-resistant column tiltable work table from -45° to +45° drilling depth stop with scale Guodpfx Aswnca Aeh Dsk Technical parameters Maximum drilling diameter 25 mm Maximum handle diameter 16 mm The distance of the spindle axis from the column is 215 mm MK3 spindle cone Spindle extension 150 mm Column diameter 80 mm Motor 230 V / 50 Hz / 1100 W Gearbox YES Base dimensions 580 x 415 mm Table dimensions 356 x 356 mm Total height 1710 mm Spindle speed range (50 Hz) 180–2000 rpm Table travel range 600 mm Dimensions after packing (length/width/height) 1510 x 690 x 256 mm Weight 95 kg

Condition: new, Year of construction: 2025, The Z5040L industrial gear drill ensures optimal drilling results. It is characterized by solid workmanship and high power, so it can be used both in repair plants and in industrial production. The drill is equipped with a massive, adjustable cube table, auto-feed, a solid gear with a wide range of rotational speeds, right/left rotation and an adjustable drilling depth limiter with a scale. The drill has a built-in cooling system. CORMAK Z5040L pillar drill - description of the machine Automatic spindle feed Cube table rotates around the column, tilts 45° to the right/left Workspace lighting Possibility of threading Work table and base equipped with T-slots Right/left rotation Drilling depth indicator Gjdjridxxspfx Ah Douk CORMAK Z5040L pillar drill - technical parameters MAX. DRILLING DIAMETER 40mm NUMBER OF GEARS 18 THREADING STEEL/CAST IRON 22/24 mm DISTANCE FROM THE CENTER OF THE SPINDLE TO THE SURFACE OF THE COLUMN 350mm MAX. DISTANCE OF THE SPINDLE END TO THE WORK TABLE 770mm MAX. DISTANCE OF THE SPINDLE TIP FROM THE BASE 1215 mm MAX. SPINDLE TRAVEL 185mm SPINDLE TAPER MK 4 FEED RANGE 0.1mm; 0.2mm SPINDLE SPEED RANGE 75 - 1450 rpm WORKTABLE DIMENSIONS 560 x 520 mm SIDE TABLE DIMENSIONS 560 x 250 mm BASE DIMENSIONS 730 x 500 mm WIDTH OF T-GROOVES 18mm ENGINE POWER 1.5 kW COOLANT PUMP POWER 75 W OVERALL DIMENSIONS 2230 x 560 x 850 mm WEIGHT U 510 kg

Condition: new, Year of construction: 2025, The Z5028W industrial gear drill is a machine that combines power and precision, which is important in a variety of applications. It is characterized by a solid construction, which ensures efficient and precise drilling. The drill has a large height-adjustable work table, 12 spindle speed ranges, right/left rotation and an adjustable drilling depth limiter with a scale. The drill has a built-in cooling system. CORMAK Z5028W pillar drill - machine characteristics Workspace lighting Possibility of threading Base with T-slots Right/left rotation Drilling depth indicator Built-in cooling system CORMAK Z5028W pole drill - technical parameters MAX. DRILLING DIAMETER 28mm SPINDLE TAPER MK3 SPINDLE TRAVEL 130mm DISTANCE FROM THE CENTER OF THE SPINDLE TO THE SURFACE OF THE COLUMN 250mm DISTANCE FROM THE SPINDLE END TO THE WORK TABLE 125 - 825 mm DISTANCE FROM SPINDLE TIP TO BASE 1220mm SPINDLE OPERATING HEIGHT (MAX FROM FOUNDATION LEVEL) 1340mm COLUMN DIAMETER 97mm SPINDLE SPEED RANGE 75 - 3200 rpm NUMBER OF GEARS 12 WORKTABLE DIMENSIONS 480 x 380 mm BASE DIMENSIONS 360 x 535 mm OVERALL HEIGHT Gsdpfxsridqus Ah Deuk 2050 mm WIDTH OF T-GROOVES 14mm ENGINE POWER 1.1 kW / 400V LIBRA 230 kg DIMENSIONS 700x480x1810 mm

Condition: new, Year of construction: 2025, Thanks to its rigid structure, the drill ensures perfect drilling quality. The tilting table allows for a wide range of processing. The device is equipped with an electronic speed indicator, drilling depth indicator and a movable head. 125 mm vice included. The model is equipped with smooth regulation of spindle speed. Machine description smooth regulation of spindle speed LED lamp work table and base equipped with T-slots solid, torsion-resistant column tiltable work table from -45° to +45° drilling depth stop with scale Technical parameters Maximum drilling diameter 25 mm Maximum handle diameter 16 mm The distance of the spindle axis from the column is 215 mm MK3 spindle cone Spindle extension 150 mm Column diameter 80 mm Motor 400 V / 50 Hz / 1500 W Guodoridnvopfx Ah Dsk Gearbox YES Base dimensions 580 x 415 mm Table dimensions 356 x 356 mm Total height 1710 mm Spindle speed range (50 Hz) 180–2000 rpm Table travel range 600 mm Dimensions after packing (length/width/height) 1510 x 690 x 256 mm Weight 95 kg

Condition: new, Year of construction: 2025, A powerful and efficient pillar drill for industrial use, 190 cm high. The drill has an efficient cooling system with a metal spout. The machine has the function of automatically changing the direction of rotation while threading. Equipped with 8 ROTATION SPEEDS with a speed range of: 140, 250, 380, 500, 580, 850, 1250, 1960 rpm. Two work tables provide many processing possibilities. The latest generation induction motor with a properly designed belt transmission ensures high power and efficiency of the drill. Machine characteristics High spindle stiffness Threading by automatic switching of left-hand rotation Left rotation switch It has 8 rotation speeds Rotational speed range: 140, 250, 380, 500, 580, 850, 1250, 1960 rpm The headstock, column, table and column base are made of the highest quality seasoned castings Spindle and gear shafts made of hardened and heat-treated steel Built-in LED lamp High engine power Large spindle stroke Clear control panel U-type spindle cover with limit switch, CE compliant Manually lifted work table with 360° rotation and mounting grooves The belt transmission cover is equipped with a safety limit switch CE certificate Adjustable drill chuck with key and Morse cone mounting A wedge for knocking out a cone Technical parameters MAX. DRILLING DIAMETER IN STEEL 32mm MAX. THREADING DIAMETER IN STEEL M20mm COLUMN DIAMETER 100mm SPINDLE TRAVEL 150mm SPINDLE-COLUMN DISTANCE 265mm WORKTABLE LIFTING RANGE 820mm RANGE OF TABLE ROTATION AROUND THE COLUMN 360° MAX. SPINDLE-BASE DISTANCE 1235mm SPINDLE MOUNTING MK3 ROTATION SPEED RANGE 140, 250, 380, 500, 580, 850, 1250, 1960 rpm NUMBER OF ROTATIONAL SPEEDS 8 TABLE DIMENSIONS 380 x 400 mm BASE DIMENSIONS 380 x 400 mm MACHINE HEIGHT 1900mm ENGINE POWER 1.5 kW Gsdpfsridp Nsx Ah Dsuk POWER 400V NET WEIGHT 310 kg SIZE OF THE PACKAGE 1040 x 640 x 2050 mm

Condition: new, Year of construction: 2025, Characteristics of the ZS-40HS gear drill Are you looking for a professional geared pillar drill for industrial use? Pay attention to the CORMAK ZS-40HS model. This robust and efficient drill has been specially designed to meet the most demanding industrial tasks. Very high work flexibility is one of the main advantages of the CORMAK ZS-40HS drill, thanks to the height-adjustable rotating head. This allows for convenient and precise drilling at various angles and depths. Additionally, the drill is equipped with an automatic threading device, which greatly facilitates the machining process. A precision handwheel with depth scale and hardened oil gear wheels ensure accuracy and durability during use. The solid base of the drill guarantees stability and high quality of the processed elements. The powerful engine of the CORMAK ZS-40HS drill ensures excellent drilling performance, regardless of the material. A stiff, thickened column with a polished surface ensures stability and precision during work. A large height-adjustable rotary table and the ability to set a vice allow the tool to be conveniently adjusted to the user's individual needs and preferences. Additionally, the set includes a set of threading holders, which is a practical extension of the drill's capabilities. Technical parameters DRILLING DIAMETER (CAST IRON/STEEL) 40/32mm THREADING (CAST IRON/STEEL) M32/M24 COLUMN DIAMETER 115mm SPINDLE TRAVEL 120mm SPINDLE DISTANCE FROM THE COLUMN AXIS 272.5mm MAX. DISTANCE OF THE SPINDLE END TO THE WORK TABLE 745mm MAX. DISTANCE OF SPINDLE TIP TO BASE 1200 mm SPINDLE TAPER MK4 SPINDLE SPEED 95-1600 rpm Gjdpjriduxsfx Ah Dsuk NUMBER OF GEARS 6 DIMENSIONS OF THE WORKTABLE SURFACE 455x385mm BASE DIMENSIONS 385x330mm OVERALL HEIGHT 2100mm ENGINE POWER 1600 W POWER 400V/50Hz WEIGHT 310 kg Additionally included: Reduction sleeves MK2, MK3, MK4, Drill chuck 16 mm, INCLUDES A FREE THREADING HOLDERS SET!

Condition: new, Year of construction: 2025, PROMOTIONAL PRICE! The industrial hull drill is used for drilling, tapping, threading, etc. The series of drills is characterized by incredible accuracy, wide speed range, easy maintenance and use. Machine characteristics Machine description WK50 is one of the universal vertical drills with a rectangular column. The maximum drilling diameter is 50 mm (in the case of a pressure of 50-60 kg/mm2 in steel, in the case of cast iron with a hardness of HB = 220, the drilling diameter is 55 mm). It can also be used for reaming, enlarging holes, countersinking, threading, etc. It is characterized by high efficiency, stiffness, accuracy, low noise level and a wide range of operating speeds. Easy to maintain, widely used in production workshops, also suitable for mass production. TECHNICAL PARAMETERS Gsdpfxorigc Nj Ah Douk MAXIMUM DRILLING DIAMETER 50mm SPINDLE TAPER MK5 MAXIMUM FEED FORCE 1600 kg MAXIMUM SPINDLE TORQUE 35 kG.m DISTANCE FROM THE SPINDLE AXIS TO THE COLUMN 335mm SPINDLE TRAVEL 250mm HEADSTOCK TRAVEL (MANUAL) 200mm NUMBER OF SPINDLE SPEED 12 SPINDLE SPEED 31.5, 45, 63, 90, 125, 180, 250, 355, 500, 710, 1000, 1400 rpm SPINDLE FEED 0.056, 0.112, 0.16, 0.224, 0.315, 0.45, 0.63, 0.90, 1.80 mm/rev SIZE OF WORKTABLE 800x320mm DISTANCE OF THE SPINDLE END TO THE WORK TABLE 550mm MAIN ENGINE POWER 3 kW COOLANT PUMP PERFORMANCE 12 l/min DIMENSIONS 1300x1200x2530mm WEIGHT 1350 kg Standard equipment Lighting installation Cooling system

Condition: new, Year of construction: 2025, Thanks to its rigid structure, the drill ensures perfect drilling quality. The tilting table allows for a wide range of processing. The device is equipped with an electronic speed indicator and a drilling depth indicator. The set includes a 100mm vice. Gusdpevuf Iksfx Ah Dek Machine description tilting table -45° to +45°, rigid machine structure, table with height adjustment using a toothed rack, three-arm lever, drilling depth limiter, electronic drilling speed indicator, laser pointer lighting of the working field Technical parameters MAXIMUM DRILLING DIAMETER 20mm RPM RANGE 190-2700 rpm POWER 230V SHANK HOLDER MK2 MAXIMUM SHAFT STROKE 120mm DISTANCE OF SHAFT FROM COLUMN 170mm DISTANCE OF SHANK FROM THE BASE 1060mm RANGE OF ADJUSTMENT OF THE TABLE HEIGHT ON THE COLUMN 660mm COLUMN DIAMETER 70mm TABLE DIMENSIONS 280x280mm BASE DIMENSIONS 480x290 mm ENGINE POWER 750 W HEIGHT 1650mm WEIGHT 75kg