Used welding smoke suction for sale (154)

Year of construction: 2006, condition: good (used), Welding fume extractor,dust collector,self-cleaning filter,pneumatic,vacuum RITTER brand. For welding, grinding, sandblasting and all kinds of dry dust. Cartridge filter in good condition. The filter is cleaned pneumatically with compressed air impulses during operation, thus high efficiency of the device. The device for continuous operation Fan in sound absorbing housing with power 2,2 Kw Dwedpfx Ashyg Ivoddsf Capacity 1200 m3/h Filtration surface 10 m2 Additionally equipped with automatic spark detection and extinguishing system. The spreading of sparks is usually caused by the operation of production machinery or material contamination. The result is downtime and loss of business, and often a serious threat to human life. Therefore, in order to eliminate such risks, pneumatic and mechanical conveyor systems must be monitored for sparks and protected by spark extinguishing systems.

Condition: used, Extraction system, central extraction system, room air filter system ETS Efficient Technical Solutions GmbH Central welding fume extraction system Year of construction approx. 2005 Volume flow approx. 5000 m³/h Extraction connection at filter inlet 1200 x 150 mm Exhaust air connection at filter outlet 400 x 300 mm Motor power 10 kW Mains connection 400 Volt, 50 Hz - Control cabinet for wall mounting - Pocket filter - Maintenance flap for filter change - Radial fan on top of the unit Space requirement L x W x H 2000 x 1650 x 3650 mm Transport height without fan 3100 mm Weight approx. 2000 kg Djdpfx Aeicic Heddswf Very good condition

Condition: good (used), Year of construction: 1997, machine/vehicle number: 16550, Offer 23433 Technical data - Vertical version for filtering welding mist + grinding dust, - Exhaust air can be discharged into the work area or outside - Stationary or semi-mobile installation - Air volume flow up to approx. 500 m³/h - free blowing 860 m³/h Dedpfx Asrl Iwzoddowf - max. vacuum - 26 kPa - Turbine capacity 1050 m³/h - Separation according to filter category M > 99 % - Filter area 3.4 m² - Automatic filter cleaning by counter-air flow during suction operation - Dust collection container - Compressed air connection 3 l/day - Connection pipe inlet + outlet each 100 mm - Silencer - Connection 400 V / 13 kW - Space requirement approx. W 1200 x H 2000 x D 700 mm - Weight approx. 350 kg

Condition: good (used), Year of construction: 2018, AMBITOWER 10 series filter ventilation (filter tower) is used for welding fume extraction in production halls. Efficient compact hall ventilation systems are used wherever selective smoke detection alone is not sufficient or direct detection during welding work on large or complex metal parts seems unfeasible. Filter towers not only provide effective separation of contaminants, but also contribute to significant savings in hall heating costs in winter. Djdpfx Adji Atb Tsdjwf Depending on the application, energy costs can be reduced by up to 70%. This is ensured, among other things, by highly efficient M-class fixed filter cartridges, which guarantee 99% separation efficiency, so that warm, purified air can return to the hall and there is no need to bring in outside air. Areas of application for Keller Ambitower 10 stationary welding fume filtration systems : Welding fume extraction in production halls (hall ventilation system) Ideal for all work areas where local extraction is not practical or not possible, metal industry Mechanical engineering Automotive industry Vehicle construction aircraft construction, etc. Parameters : Engine power - 7.5 Kw. Built-in inverter Capacity - 10000 m3/h Filtration area - 90 m2 Antistatic filter cartridges Noise level - ≤ 75 Year of manufacture: 2018 Technical documentation included dimensions: width - 2.35m x 1.35m height - 3.50 m Weight - 1800 kg

Condition: used, Welding fume extraction unit for wall mounting, KEMPER extraction device Type 85400 Dwsdpfeu S Tfgex Addef Serial number: 279092 Year of manufacture: 1997 Volume flow: 1700 m3/h Static pressure: 2000 Pa Extraction connection: Ø 250 mm Motor power: 1.5 kW Power supply: 400 Volts, 50 Hz - Radial fan - Designed for a mechanical air filter with approx. 99% separation efficiency - Main filter defective (surcharge for new main filter: EUR 195 net) - Articulated extraction arm Ø 150 mm, approx. 2 meters long - Extraction pipe with 3 joints and extraction hood (adapter connection to filter housing missing) - No external control unit, without filter monitoring, without start switch - Air outlet: 250 x 140 mm Required space (L x W x H): 680 x 660 x 1100 mm Weight: approx. 120 kg Good condition Surcharge for new main filter: EUR 195 net

Condition: good (used), Year of construction: 2018, machine/vehicle number: 18-1427, Offer 24500 Technical Specifications - Upright design for extracting welding mist and grinding dust - Exhaust air can be vented into the work area or outside - BGIA M – Class Dodowdvthopfx Addowf - KOMPAKT 3000 control system - Air flow rate approx. 28,000 m³/h - Max. static pressure 4,000 pa - Efficiency > 99.9% - 6 cartridge filters - Filter area 6 / 150 m² - Jet Pulse filter cleaning - Dust container 40 L - Compressed air connection 6 to 8 bar - Drive - Fan 400 V / 5.5 kW - Space requirement approx. W 1900 x H 3600 x D 1600 mm - Weight approx. 990 kg - Operating hours readout 11,216 h

Condition: good (used), Year of construction: 2007, functionality: fully functional, filter area: 64 m², suction capacity: 4,500 m³/h, negative pressure: 3,200 Pa, Dust extraction, welding fume extraction, cartridge filter self-cleaning, pneumatic, vacuum for plasma, laser , sandblasting, soda blasting, shot blasting and all kinds of dry dust. Brand : ESTA Model : DUSTEX F-64 The filter is cleaned by compressed air pulses during operation, which makes the device highly efficient. Fan on the clean side which reduces the risk of explosion to a minimum. Parameters : Capacity - 4500 m3/h Vacuum - 3200 Pa Filtration area - 64 m2 Dwjdevkd Rpspfx Addof Cartridge filter cartridges - 4 pieces. 4 Kw motor. Inlet diameter - 280mm Complete with HEPA filter of filtration class H13 The device from the year 2007

Condition: used, Filter system - extraction system, central extraction Cartridge - pulse filter VALCO type Pidclean 4N Central welding fume extraction system Series. No.: 15003 Year of construction 2003 Volume flow max. 3500 m³/h Filter area 92.8 m² Differential pressure 700 Pa Suction connection at filter inlet Ø 250 mm Exhaust air connection at filter outlet 225 x 160 mm Compressed air requirement 4 to 6 bar Motor power 5.5 kW Mains connection 400 Volt, 50 Hz - AUTEL filter control unit, type Eco S6 - Pneumatic filter cleaning, automatic via control unit - 4 cartridge filters Ø 350 x 660 mm - Maintenance flap for filter change - Radial fan on top of the system - Removable dirt collection container approx. 40 liters - Silencer for fan outlet, Ø 250 mm Djdpfx Aomquwqeddowf - Electrical diagram and operating instructions for the control unit available Space requirement L x W x H 2150 x 1350 x 2560 mm Weight approx. 550 kg Good condition

Condition: good (used), Year of construction: 2018, machine/vehicle number: 18-426, Offer 24497 Dwjdpfxewd Nlks Addjf Technical Specifications - Upright design for extracting welding mist and grinding dust - Exhaust air can be vented into the work area or outside - BGIA M – Class - KOMPAKT 3000 control system - Air flow rate approx. 13,000 m³/h - Max. static pressure 4,000 pa - Efficiency > 99.9% - 4 cartridge filters - Filter area 6 / 150 m² - Jet Pulse filter cleaning - Dust container 40 L - Compressed air connection 6 to 8 bar - Drive - Fan 400 V / 7.5 kW - Space requirement approx. W 1,900 x H 3,400 x D 1,600 mm - Weight approx. 800 kg - Operating hours readout 4,126 h

Condition: excellent (used), Year of construction: 2020, operating hours: 1,100 h, machine/vehicle number: 20000165, suction capacity: 22,000 m³/h, ESTA FILTOWER D-200 filter tower Filtration of industrial welding halls - numerous technological processes in production plants. Area of application: dust extraction, dry, loose Very low energy consumption due to the use of innovative fans. The use instead of a standard fan - EC fan giving IMMEDIATE savings by minimizing electricity consumption. Dwsdpfxotzcn Re Addef EC fan with built-in inverter also gives you the ability to control the speed / energy consumption / efficiency Top suction and draft-free bottom exhaust - exactly where you work. Layer filtering principle, the unit does not require piping. Cartridge filter cartridges - self-cleaning by means of compressed air pulses during operation. Filter cleaning by means of pressure difference - no compressed air losses. The principle of stratified ventilation:polluted air is drawn in from above, filtered, and then released at floor level as clean breathable air without generating drafts. Exactly where workers inhale it. Operated only 1,100 hours. Year of manufacture 2020 Parameters: - EC motor ZIEHL-ABEGG : 4 x 3.7kW, 400V, 50Hz - max. volumetric flow: 22,000m3/h - max. vacuum: 2000Pa - Sound pressure level: 72dB(A) - Number of filters: 9 pieces - Main filter area: 225m² - Compressed air connection: 1/4" - Dimensions (L/W/H): 1790x2090x3823mm - Weight: approx. 1500kg

Condition: good (used), Year of construction: 1997, machine/vehicle number: 0001, Offer 24587 Technical data: - Electrostatic filter with control light - Exhausted and cleaned air is recirculated to the work area - Wall-mounted version with two jointed extraction arms - Jointed arm length approx. 9000 mm - Air volume flow approx. 4700 m³/h - Active filter surface 9.2 m² Dodpfswn Egrjx Addewf - Drive - Fan 400 V / 0.75 kW - Space requirement approx. W 700 x H 1600 x D 550 mm - Weight approx. 120 kg

Condition: good (used), Dust extraction,welding fume extraction,cartridge filter self-cleaning,pneumatic,vacuum for plasma,laser,sandblasting,sodding,shotblasting and all kinds of dry dust. Brand: Vaupel - Gram Model : FL 104H High-pressure device. Filter cleaned by compressed air pulses during operation, thus high efficiency of the device. Fan on the clean side which reduces the risk of explosion to a minimum. Application: Dwjdpfxon Nw Nte Addsf central extraction system for multiple welding stations extraction system for welding robots extraction system for thermal cutting and grinding tables extraction system in combination with an extraction table extraction system for grinding of non-exploitable materials Parameters : Sound-insulated fan with silencer with 18.5 Kw output Capacity 8000 m3/h Filtration area 104 m2 Included : Filter unit Inverter Lime dispenser Noise suppressor

Condition: good (used), Year of construction: 2002, machine/vehicle number: 121630011, Offer 24386 Technical data: - Mobile cartridge filter unit with articulated extraction arms - suitable for welding mist extraction when welding - steel + stainless steel + aluminium + unalloyed or galvanized steels - Welding fume class W3 - Control with digital display - Separation efficiency 99 % - Air volume flow approx. 3000 m³/h - Max. static pressure 2500 pa - Filter area 20 qm² Dodpfx Aeu Aafdjddswf - Automatic filter cleaning - Articulated extraction arm 360° 4000 mm - Arm diameter 160 mm - Drive - fan 400 V / 1.10 kW - Space requirement approx. W 700 x H min. 2150 x D 1100 mm - Weight approx. 150 kg - Operating hours ( read ) 980 h

Condition: good (used), Year of construction: 1998, filter area: 84 m², suction capacity: 2,000 m³/h, Dust extraction, welding fume extraction, cartridge filter self-cleaning, pneumatic, vacuum for plasma, laser, sandblasting, soda blasting, shot blasting and all kinds of dry dust. The filter is cleaned pneumatically by impulses of compressed air during operation, which makes the device highly efficient. Fan on the clean side, which reduces the risk of explosion to a minimum. Built-in 4 Kw fan Capacity of 2000 m3/h Filtration area 84 m2 Cartridge filter cartridges - 4 pieces. Inlet diameter 200 mm Length - 1.80 m width - 1.10 m height - 1.80 m Dsdpfx Adjttkgxsdowf

Year of construction: 2007, condition: good (used), machine/vehicle number: 164883, OFFER 17015 Technical data: - BIA approved welding extractor - Articulated extraction arm 3000 mm - air volume flow approx. 1000 m³/h Dodpfjhw Ev Ssx Addowf - max. static pressure 2700 pa - filter area approx. m² - filter control light for filter change - separation efficiency 99,9 - compressed air connection 6 bar - drive - fan 400 V / 1,5 kW - Space requirement approx. W 700 x H min. 1800 x D 950 mm - Weight approx. 250 kg

Condition: used, suction capacity: 1,600 m³/h, negative pressure: 2,800 Pa, Mobile station welding fume extractor, dust extractor , filter ESTA SRF K-15 FM Fan of 2.2 Kw (three-phase) located on the clean side Extraction arm with a range of 3 m Capacity 1600 m3/h Vacuum pressure 2800 Pa Possibility to connect a second extraction arm( inlet 2 x 140mm) SRF K series is designed for extraction and filtration of welding fumes and light grinding dust. It is an excellent solution to the problem of welding fumes and other dust contaminants. Welding or soldering fumes are filtered with a filtration efficiency of 99.9%. The high airflow rate can even pull out large clouds of smoke. Automatic filter cleaning manually activated - after finishing work, connect the compressed air line to the device and manually start the filter cleaning procedure. The filter cartridge is automatically cleaned by pulses of compressed air through a rotary nozzle, which significantly extends the life of the cartridge. Dwsdstpui Ispfx Addsf During welding, the device does not need to be connected to the compressed air network and thus remains mobile.

Condition: used, Year of construction: 1993, suction capacity: 1,500 m³/h, negative pressure: 3,600 Pa, Dust extractor,welding fume extractor by Herding. Self-cleaning, pneumatic filter for plasma, laser, sandblasting, sodding, grinding plaster, cement, plastic and all kinds of dry dust. Dwsdpfxjtq Ufvo Addof The filter is cleaned pneumatically by pulses of compressed air during operation, thus high efficiency of the device. High-quality filter cartridges of HSL type are made of sintered polyethylene with the possibility of cleaning have several times longer service life compared to ordinary cartridges. As standard, the coating is made of PTFE, which in combination with the body material (PE) provides a very high chemical durability. 4 Kw fan Capacity - 1500 m3/h Filtration area - 38 m2 Control cabinet Inlet diameter - 180 mm Mag. no: 0848/2

Condition: excellent (used), Year of construction: 2018, operating hours: 3,934 h, suction capacity: 18,000 m³/h, negative pressure: 2,000 Pa, IVAT Air Tower 18000K Filtration Tower Filtration of industrial welding halls - numerous technological processes in production plants, carried out mainly in metal processing. Suction at the top and draft-free exhaust at the bottom - right into the work areas. The principle of stratified filtration, the device does not require the installation of pipelines. Cartridge filter cartridges - self-cleaning by means of compressed air pulses during operation. Cleaning of filters by means of pressure difference - no loss of compressed air. The principle of stratified ventilation : contaminated air is drawn in from above, filtered, and then released at floor level as clean breathable air without generating drafts, at speeds of less than 1.2 m/s. Exactly where workers inhale it. And that's over a wide 270-degree range. In doing so, the tower operates according to the principle of layered ventilation, recommended by labor unions and considered the best type of air circulation. Year of production 2018 operating hours : 3934 Parameters: 11 Kw. fan with frequency converter Air flow rate 18000 m3/h Filtration area of 150 m2 6 pieces of cartridges Very quiet operation Degree of purification - > 99,9 % Equipment: - IVAT.Energy package 11-18.5.(Siemens Dwedpfxetrwzwo Addsf Frequency converter) - Control of the IVAT device in the room(fully automatic). - IVAT.Temperature control (Temperature control and monitoring) - IVAT Spark fire protection(sparks and fire sensors in the tower) - IVAT.Industrie-Energie4.0 (SPS Siemens + Ethernet remote maintenance + full graphics Display + connection to control center Fire alarm + energy manager) Dimensions: width - 1900 mm depth - 1530 mm height - 3600 mm

Condition: excellent (used), Year of construction: 2012, Dust extraction,welding fume extraction,cartridge filter self-cleaning,pneumatic,vacuum for plasma,laser,sandblasting,sodding,shotblasting and all kinds of dry dust. The filter is cleaned pneumatically by impulses of compressed air during operation, which makes the device highly efficient. The device is equipped with a pre-separator and a mechanical spark trap. Fan on the clean side, which reduces the risk of explosion to a minimum. Brand: Donaldson Torit Model: DFPRO 12-CYCLO Year of production - 2012 Donaldson Torit Ultra WEB patron filter cartridges - 12 pcs. Filtration area of 215 m2 18.5 Kw fans. Capacity 11000 m3/h Vacuum 3900 Pa Inlet diameter - 500 mm We also offer on request new filter cartridges tailored according to the purpose of the device. Dimensions: height - 5.00 m length. - 3.50 m width - 1.70 m weight - 2200 kg Dwjdpfxeiypxis Addsf

Condition: good (used), Dust extraction,welding fume extractor,self-cleaning,pneumatic,vacuum filter KELLER Uni-Star XK. For plasma,laser,sandblasting,sodding and all kinds of dry dust. The fan is placed behind the filter on the clean side which reduces the risk of explosion initiation to a minimum. Fan with a power of 1.8 Kw Panel filter cartridges of the "Multituba" type Dwodpfx Asivtqboddef Capacity 800 m3/h

Condition: used, Year of construction: 2009, suction capacity: 16,000 m³/h, negative pressure: 2,500 Pa, Dust extraction,welding fume extraction,cartridge filter self-cleaning,pneumatic,vacuum for plasma,laser,sandblasting,sodding,blasting and all kinds of dry dust. The filter is cleaned pneumatically by impulses of compressed air during operation, which makes the device highly efficient. Fan on the clean side, which reduces the risk of explosion to a minimum. 15 Kw fan Capacity 16000 m3/h Vacuum 2500 Pa Filter cartridges - 13 pieces. Filtration area 260m2 Dsdpfx Adsrk Itcedewf Inlet diameter - 2x 560 mm Year of production - 2009 Dimensions of the device: height - 2.70m width - 5.70m x 1.85m weight - 2600kg

Year of construction: 1996, condition: used, Dust extraction,welding fume extractor,self-cleaning filter,cartridge filter for plasma,laser,sandblasting,shotblasting The filter is cleaned pneumatically by pulses of compressed air during operation, thus high efficiency of the device. Fan on the clean side, which reduces the risk of explosion to a minimum. Brand: STURM Model: 3-7x20/140 DLR P Year of production 1996 Engine power 7.5 Kw Capacity 4200 m3/h Inlet diameter - 200 mm Cartridge filter cartridges - 7 pieces. Filtration area 140 m2 Complete with electrical diagram and partial piping Dedpeif Rluefx Addjwf

Condition: good (used), Mobile station welding fume extractor.dust extractor,filter ESTA SRF K-10 Fan of 1.3 Kw (230V) located on the clean side. Extraction arm with a range of 2 m. Capacity 950 m3/h. Vacuum pressure of 2800 Pa. The SRF K series is designed for extraction and filtration of welding fumes and light grinding dust. It is an excellent solution to the problem of welding fumes and other dust pollution. Welding or soldering fumes are filtered with a filtration efficiency of 99.9%. The high airflow rate can even pull out large clouds of smoke. Automatic filter cleaning manually activated - after finishing work, connect the compressed air line to the device and manually start the filter cleaning procedure. The filter cartridge is automatically cleaned by pulses of compressed air through a rotary nozzle, which significantly extends the life of the cartridge. During welding, the device does not need to be connected to the compressed air network and thus remains mobile. Dwjdpelqw Igefx Addef

Condition: excellent (used), filter area: 50 m², suction capacity: 650 m³/h, negative pressure: 38,000 Pa, High-pressure fume extractor, dust extractor, TEKA self-cleaning filter. Filter for plasma, laser. Due to its design, the system is particularly recommended for processing greasy, sticky fumes and dust. The device is equipped with an automatic system for impregnating cartridge filters and an activated carbon filter for neutralizing odors generated during processing. The filter is cleaned pneumatically with impulses of compressed air during operation, which results in high efficiency of the device. The extraction is designed for special applications where the filtered fumes and dusts may be soggy and sticky. By feeding the impregnant, moisture is captured from the smoke, which helps protect the filters from sticking. In this case, the life of the patron filters is extended. After the cleaning process, the control gives a pulse to the magnetic valve, located on the top cover of the powder-filled barrel. The applied magnetic pulse swirls the impregnant, which enters the suction pipeline. The powder covers the working surface and provides a protective coating for the filters. Unit like new - worked only 126 hours !!! Turbine with a power of 7.5 Kw. in a sound-absorbing housing with a silencer Capacity 650 m3/h at a vacuum of up to 38 000 Pa !!! Dwedpfx Ajrhidmsddef Filtration area of 50m2 Inlet diameter : 100 mm Complete with , pneumatic gate valve , silencer and partial piping.

Year of construction: 1999, condition: good (used), DISA dust extraction, welding fume extraction, self-cleaning cartridge filters, pneumatic filters, vacuum filters for plasma, laser, sandblasting, soda blasting, shot blasting, plastics and catalysts, mineral processes and all kinds of dry dust. The filter is cleaned pneumatically with compressed air impulses during operation, thus high efficiency of the device. Fan on the clean side which reduces the risk of explosion to a minimum. Djdpfx Adjhqd Tvedjwf Highly durable filter cartridges resistant to moisture. Aluminized, antistatic, operating temperature up to 135 degrees celsius. Fan power 11 Kw Efficiency up to 8000 m3/h. Vacuum up to 4300 Pa Filtration surface 128 m2