Used welding smoke suction for sale (133)

Condition: good (used), Year of construction: 2016, operating hours: 3,890 h, filter area: 222 m², suction capacity: 20,000 m³/h, IVAT 20000 m3/h filter ventilation tower Industrial welding hall filtration - numerous technological processes in production plants, mainly carried out in metalworking. Suction from the top and draft-free exhaust from the bottom - exactly to the workplace. Cedpfx Aevrgbtefpegn The principle of layered filter ventilation, the device does not require the installation of pipelines. Cartridge filter inserts - self-cleaning by means of compressed air pulses during operation. Filter cleaning by means of pressure difference - no loss of compressed air. The principle of layered ventilation: contaminated air is sucked in from the top, filtered and then released at floor level as clean air suitable for breathing without generating drafts, at a speed below 1.2 m/s. Exactly where employees inhale it. And this in a wide range of 270 degrees. The tower operates in accordance with the principle of layered ventilation, recommended by trade unions and considered the best type of air circulation. Brand: IVAT Model: Air FTower-20.000 Year of production 2016 Working hours: 3890 Parameters: 15 kW fan Air flow 20000 m3/h Filter surface 222 m2 6 cartridge inserts Built-in frequency converter. Additional final fine filter with an area of 65 m2 in filtration class F9 gives us higher air purification efficiency and additionally protects the fan in the event of damage to the main filter. Dust drawer with a capacity of 200 l. Very quiet operation 75 dB (A) Purification degree - > 99.9 % Stock no.: 0944

Condition: good (used), Year of construction: 2018, AMBITOWER 10 series filter ventilation (filter tower) is used for welding fume extraction in production halls. Efficient compact hall ventilation systems are used wherever selective smoke detection alone is not sufficient or direct detection during welding work on large or complex metal parts seems unfeasible. Filter towers not only provide effective separation of contaminants, but also contribute to significant savings in hall heating costs in winter. Depending on the application, energy costs can be reduced by up to 70%. This is ensured, among other things, by highly efficient M-class fixed filter cartridges, which guarantee 99% separation efficiency, so that warm, purified air can return to the hall and there is no need to bring in outside air. Areas of application for Keller Ambitower 10 stationary welding fume filtration systems : Welding fume extraction in production halls (hall ventilation system) Cgsdpfoi Atb Tsx Afpjn Ideal for all work areas where local extraction is not practical or not possible, metal industry Mechanical engineering Automotive industry Vehicle construction aircraft construction, etc. Parameters : Engine power - 7.5 Kw. Built-in inverter Capacity - 10000 m3/h Filtration area - 90 m2 Antistatic filter cartridges Noise level - ≤ 75 Year of manufacture: 2018 Technical documentation included dimensions: width - 2.35m x 1.35m height - 3.50 m Weight - 1800 kg

Condition: used, filter area: 252 m², suction capacity: 12,000 m³/h, Dust extraction, welding fume extraction, self-cleaning, pneumatic, vacuum cartridge filter for plasma, laser, sandblasting, soda blasting, shot blasting and all types of dry dust. Filter cleaned with compressed air pulses during operation, which ensures high efficiency of the device. Fan on the clean side, which reduces the risk of explosion to a minimum. Parameters: Efficiency - 12000 m3/h Filtration area 252 m2 Cartridge filter inserts - 12 pcs. 15 kW engine inlet diameter - 500 mm Dimensions: height - 3.65 m width - 2.10 m depth - 2.10 m fan: 1.75 m x 1.50 m height 1.45 m Csdpfxevzy Irs Afpsgn stock no.: 0948

Condition: used, Year of construction: 1993, suction capacity: 1,500 m³/h, negative pressure: 3,600 Pa, Dust extractor,welding fume extractor by Herding. Self-cleaning, pneumatic filter for plasma, laser, sandblasting, sodding, grinding plaster, cement, plastic and all kinds of dry dust. The filter is cleaned pneumatically by pulses of compressed air during operation, thus high efficiency of the device. High-quality filter cartridges of HSL type are made of sintered polyethylene with the possibility of cleaning have several times longer service life compared to ordinary cartridges. As standard, the coating is made of PTFE, which in combination with the body material (PE) provides a very high chemical durability. Csdpjtq Ufvofx Afpogn 4 Kw fan Capacity - 1500 m3/h Filtration area - 38 m2 Control cabinet Inlet diameter - 180 mm Mag. no: 0848/2

Condition: used, filter area: 60 m², suction capacity: 5,000 m³/h, Dust extraction, welding fume extraction, filter ventilation, self-cleaning filter, pneumatic, vacuum dust extractor, plasma, laser, sandblasting and all types of dry dust absorber. PLYMOVENT MDB Multi Dust Bank Cartridge filter inserts cleaned pneumatically with compressed air pulses during operation, which ensures high efficiency of the device. The fan is placed behind the filter on the clean side, which reduces the risk of explosion to a minimum. 5.5 kW fan complete with noise silencer Efficiency 5000 m3/h Filtration area 60 m2 Filter inserts 4 pcs. Cjdpfxowbtczo Afpjgn Inlet diameter 315 mm The device is in very good technical condition.

Condition: used, suction capacity: 1,000 m³/h, Welding fume extractor, dust extractor , self-cleaning filter, pneumatic, vacuum KEMPER. For welding, grinding and all kinds of dry dust. Cartridge filter cartridges. In addition, HEPA filter for more thorough cleaning. The filter is cleaned pneumatically by impulses of compressed air during operation, which makes the device highly efficient. Fan of 1.6 Kw Cgsderywfvspfx Afpsn Efficiency 1000 m3/h

Condition: excellent (used), Year of construction: 2012, Dust extraction,welding fume extraction,cartridge filter self-cleaning,pneumatic,vacuum for plasma,laser,sandblasting,sodding,shotblasting and all kinds of dry dust. Cgjdeiypxiepfx Afpjn The filter is cleaned pneumatically by impulses of compressed air during operation, which makes the device highly efficient. The device is equipped with a pre-separator and a mechanical spark trap. Fan on the clean side, which reduces the risk of explosion to a minimum. Brand: Donaldson Torit Model: DFPRO 12-CYCLO Year of production - 2012 Donaldson Torit Ultra WEB patron filter cartridges - 12 pcs. Filtration area of 215 m2 18.5 Kw fans. Capacity 11000 m3/h Vacuum 3900 Pa Inlet diameter - 500 mm We also offer on request new filter cartridges tailored according to the purpose of the device. Dimensions: height - 5.00 m length. - 3.50 m width - 1.70 m weight - 2200 kg

Year of construction: 2006, condition: good (used), Welding fume extractor,dust collector,self-cleaning filter,pneumatic,vacuum RITTER brand. For welding, grinding, sandblasting and all kinds of dry dust. Cartridge filter in good condition. The filter is cleaned pneumatically with compressed air impulses during operation, thus high efficiency of the device. The device for continuous operation Fan in sound absorbing housing with power 2,2 Kw Capacity 1200 m3/h Codpohyg Ivjfx Afpsgn Filtration surface 10 m2 Additionally equipped with automatic spark detection and extinguishing system. The spreading of sparks is usually caused by the operation of production machinery or material contamination. The result is downtime and loss of business, and often a serious threat to human life. Therefore, in order to eliminate such risks, pneumatic and mechanical conveyor systems must be monitored for sparks and protected by spark extinguishing systems.

Condition: good (used), filter area: 180 m², suction capacity: 9,000 m³/h, Dust extraction, welding fume extraction, filtering, self-cleaning filter, pneumatic, vacuum dust collector, absorber for plasma, laser, sandblasting and all kinds of dry dust. PLYMOVENT MDB / AZUR Cartridge filter cartridges cleaned pneumatically with pulses of compressed air during operation, resulting in high efficiency of the device. The fan is located behind the filter on the clean side, which reduces the risk of explosion to a minimum. inlet diameter - 400 mm The fan has a power of 7.5 Kw. Capacity up to 9000 m3/h Filtration area of 180 m2 Dimensions: height - 3.10m width - 2.80m depth - 1.25m Cgjdpfxou A Thlo Afpon fan: 1.00m x 1.00m

Condition: good (used), Dust extraction,welding fume extraction,cartridge filter self-cleaning,pneumatic,vacuum for plasma,laser,sandblasting,sodding,shotblasting and all kinds of dry dust. Brand: Vaupel - Gram Model : FL 104H High-pressure device. Filter cleaned by compressed air pulses during operation, thus high efficiency of the device. Fan on the clean side which reduces the risk of explosion to a minimum. Application: central extraction system for multiple welding stations extraction system for welding robots extraction system for thermal cutting and grinding tables extraction system in combination with an extraction table extraction system for grinding of non-exploitable materials Parameters : Sound-insulated fan with silencer with 18.5 Kw output Capacity 8000 m3/h Filtration area 104 m2 Included : Filter unit Inverter Lime dispenser Cedpfx Aen Nw Ntjfpsgn Noise suppressor

Year of construction: 2005, condition: good (used), Dust extractor,welding fume extractor by HERDING. Self-cleaning,pneumatic filter for plasma,laser,sandblasting,sodding,grinding plaster,cement,plastic and all kinds of dry dust. The filter is cleaned pneumatically by impulses of compressed air during operation, thus high efficiency of the device. Highly efficient Jet-Pulse cleaning system with low compressed air consumption. Integrated control cabinet with microprocessor to control all components. Herding MULTICOATER - (for sticky dust) for automatic addition of filter additives to protect filter media. 4 Kw fan Capacity - 800 m3/h Herding® DELTA or DELTA² filter elements Cgjdspgnfdspfx Afpsn Filtration area - 14.56 m2

Condition: used, Year of construction: 1994, filter area: 250 m², suction capacity: 7,500 m³/h, Dust extraction, welding fume extraction, filter ventilation, self-cleaning filter, pneumatic, vacuum dust extractor, plasma, laser, sandblasting and all types of dry dust absorber. Donaldson Torit model: 3DF12 cyclopeel - with pre-separator Cartridge filter inserts cleaned pneumatically with compressed air pulses during operation, which ensures high efficiency of the device. The fan is placed behind the filter on the clean side, which reduces the risk of explosion to a minimum. Cartridge filter inserts. Fan with a power of 5.5 Kw Max efficiency 7500 m3/h Filtration surface 250 m2 12 filter inserts inlet diameter - 315 mm Dimensions: Cedjwgknxepfx Afpjgn filter unit: width - 2.15 m x 2.25 m height - 3.15 m control cabinet: length - 1.20m width - 0.80m height - 0.40m fan: length - 1.20m width - 0.80 m height - 1.20m stock no.: 0988

Condition: good (used), Year of construction: 2009, Dust extraction,filtration,welding fume extraction,self-cleaning cartridge filter,pneumatic,vacuum TEKA AIRTECH P24 Csdpfxjl Dw U Dj Afpjgn The main areas of application for the systems are industrial plants/welding shops where it is where it is not possible to realize spot extraction point extraction or where point extraction is not sufficient to maintain clean air on the shop floor. Side-mounted ducts with point capture point sucks in contaminated air air and lead it to the filter section. Here, contaminants in the form of fine particles cover the surface of the filter patron filter. An administered pulse of compressed air cleans the cartridge filters, automatically at the required intervals. After the impact of the compressed air, the particles collected on the surface of the filters break off off and fall into the dust tank. The cleaned air is returned to the work room through individually adjusted long-range nozzles. At the same time ejection of the purified air directs the contaminated air of the hall towards the toward the extraction channels. Filter cleaned by microprocessor controller with compressed air pulses during operation, thus high efficiency of the device. Low demand for compressed air thanks to the system "Power-Spray" The AIRTECH unit series is certified by IFA in accordance with EN ISO 15012- 1 or DIN EN ISO 21904-1/-2 and approved for welding fume class W3 as a permanent local extraction device of welding fumes. Parameters: Capacity - 24 000 m3/h Motor power - 15 Kw Fan in sound-absorbing housing Control cabinet with electrical documentation Year of production - 2009 Dimensions: Height - 6.80 m Base width - 1.95 m x 1.90 m Total width - 3.60 m x 2.00 m We have several pieces on offer. The price given in the ad for 1 piece.

Condition: good (used), Mobile station welding fume extractor.dust extractor,filter ESTA SRF K-10 Cgodpelqw Igjfx Afpsn Fan of 1.3 Kw (230V) located on the clean side. Extraction arm with a range of 2 m. Capacity 950 m3/h. Vacuum pressure of 2800 Pa. The SRF K series is designed for extraction and filtration of welding fumes and light grinding dust. It is an excellent solution to the problem of welding fumes and other dust pollution. Welding or soldering fumes are filtered with a filtration efficiency of 99.9%. The high airflow rate can even pull out large clouds of smoke. Automatic filter cleaning manually activated - after finishing work, connect the compressed air line to the device and manually start the filter cleaning procedure. The filter cartridge is automatically cleaned by pulses of compressed air through a rotary nozzle, which significantly extends the life of the cartridge. During welding, the device does not need to be connected to the compressed air network and thus remains mobile.

Condition: good (used), Year of construction: 2017, suction capacity: 16,600 m³/h, negative pressure: 5,600 Pa, Dust extraction, welding fume extraction, patron filter self-cleaning, pneumatic, vacuum for plasma, laser, sandblasting, soda blasting, shot blasting and all kinds of dry dust. The filter is cleaned pneumatically by pulses of compressed air during operation, which makes the device highly efficient. Fan on the clean side which reduces the risk of explosion to a minimum. Brand: Donaldson Torit DCE Model: DFO4-24 Year of production - 2017 Cartridge filter cartridges, oval - DFO ULTRA-WEB FR - 24 pieces Cgedpfx Asttah Ujfpen Filtration area of 430 m2 45 Kw fan. Fan model : ART 631 N4T Built-in frequency converter and RITTAL SK 3305540 control cabinet air conditioner. Capacity 16600 m3/h Inlet diameter - 1 x 350mm , 2 x 300 mm Dust emptying cell sluice. Comes with a silencer and technical and electrical documentation. Also on offer on request new filter cartridges tailored according to the purpose of the device.

Condition: used, suction capacity: 1,600 m³/h, negative pressure: 2,800 Pa, Mobile station welding fume extractor, dust extractor , filter ESTA SRF K-15 FM Fan of 2.2 Kw (three-phase) located on the clean side Extraction arm with a range of 3 m Capacity 1600 m3/h Vacuum pressure 2800 Pa Csdpfstpui Iox Afpogn Possibility to connect a second extraction arm( inlet 2 x 140mm) SRF K series is designed for extraction and filtration of welding fumes and light grinding dust. It is an excellent solution to the problem of welding fumes and other dust contaminants. Welding or soldering fumes are filtered with a filtration efficiency of 99.9%. The high airflow rate can even pull out large clouds of smoke. Automatic filter cleaning manually activated - after finishing work, connect the compressed air line to the device and manually start the filter cleaning procedure. The filter cartridge is automatically cleaned by pulses of compressed air through a rotary nozzle, which significantly extends the life of the cartridge. During welding, the device does not need to be connected to the compressed air network and thus remains mobile.

Condition: good (used), Extractor for laser, welding, dust, high-pressure self-cleaning LINCOLN brand. Cartridge filter cleaned during operation by pulses of compressed air, thus high efficiency of the device. High-pressure turbine motor with 5.5 Kw and a vacuum of 17.650 PA! capacity 500 m3/h Cgjdpfx Afog Th S Aopjn

Condition: new, Year of construction: 2021, functionality: fully functional, machine/vehicle number: 33461/2021/155537, overall weight: 1,150 kg, filter area: 55.2 m², suction capacity: 2,550 m³/h, Dust extraction, fume extraction by Herding. Model: COMP 1500-14/9 SB Clean surface filtration based on rigid filters. High-efficiency blast cleaning system with low compressed gas consumption. Powerful radial fan with direct drive electric motor with attached frequency converter for process- and energy-optimized operation. Cgodpfx Afeuy N S Uspen Integrated control cabinet with processor to control all components. High-quality powder coating of the compact housing. All Herding polymer-based filter media are completely PFAS-free, have an extremely long service life and, depending on the process, achieve a service life of more than 15 years. Unit new. 11 Kw. fan with integrated frequency converter Capacity - 2550 m3/h Inlet diameter - 200 mm stock no.: 0889

Year of construction: 1995, condition: used, Dust extractor,welding fume extractor by Herding. Cgsdpfx Afspwhl Ujpen Self-cleaning,pneumatic filter for plasma,laser,sandblasting,sodding,grinding plaster,cement,plastic and all kinds of dry dust. The filter is cleaned pneumatically by impulses of compressed air during operation, thus high efficiency of the device. High-quality filter cartridges of HSL type are made of sintered polyethylene with the possibility of cleaning have several times longer service life compared to ordinary cartridges. As standard, the coating is made of PTFE, which in combination with the material of the body (PE) provides a very high chemical durability. 4 Kw fan Capacity - 1680 m3/h

Year of construction: 2019, condition: good (used), Dust extraction,welding fume extractor,cartridge filter self-cleaning,pneumatic,vacuum for plasma,laser,sandblasting,sodding,blasting and all kinds of dry dust. Brand: TEKA / Bystronic Model: Filtercube 4H / FilterBys Version 2 Year of manufacture: 2019 Filter cleaned by microprocessor controller with compressed air pulses during operation thus high efficiency of the device. Low compressed air demand thanks to the system "Power-Spray" The Filtercube central filter unit equipped with cartridge filters is the ideal solution for almost all problems in the area of smoke and dust filtration. Fan on the clean side which reduces the risk of explosion to a minimum. Application: central extraction system for multiple welding stations extraction system for welding robots extraction system for thermal cutting and grinding tables system for general hall filtering (push-pull system, displacement system) extraction system in combination with an extraction table extraction system for grinding of non-exploitable materials Parameters: 5.5 Kw fan Capacity 3800 m3/h Vacuum pressure 3250 Pa Cedpfenyhvqsx Afpjgn Inlet diameter : 250 mm Filtration area of 100 m2 Equipped with "DUST-VAC" unit , which automatically pumps the dust into a separate tank. Possibility to order new filter cartridges tailored to the customer's needs Technical documentation included.

Condition: good (used), suction capacity: 3,300 m³/h, negative pressure: 2,000 Pa, Dust extraction, welding fume extractor, self-cleaning filter, cartridge filter for plasma, laser, sandblasting, shotblasting The filter is cleaned pneumatically by impulses of compressed air during operation, thus high efficiency of the device. Fan on the clean side, which reduces the risk of explosion to a minimum. Brand: DUST HOG / UAS Model: SBS-4-2 SD Engine power 4 Kw Fan in sound-absorbing housing Capacity 3300 m3/h Vacuum - 2000 Pa Filtration area - 112m2 Inlet diameter - 300 mm Cartridge filter cartridges - 4 pieces. Height - 3.90 m depth - 1.70m Codpfsunh Uvex Afpegn width - 1.25m

Condition: used, Year of construction: 1999, suction capacity: 5,600 m³/h, negative pressure: 3,000 Pa, Dust extraction, welding fume extraction, self-cleaning filter, pneumatic, vacuum dust extractor, plasma, laser, sandblasting and all types of dry dust. Filter cleaned pneumatically with compressed air pulses during operation, which results in high efficiency of the device. Sinbran filter cartridges. SINBRAN filter cartridges are environmentally friendly and therefore suitable for use in the pharmaceutical and food industries. They are suitable for separating aerosols of organic materials, such as those created during laser cutting operations. SINBRAN filter cartridges combine the advantages of membrane filters with the advantages of rigid body filters: Large filter surface requiring minimal space. High mechanical load capacity, very long life cycle, Codevxtkzepfx Afpsgn low pressure drop and high filtration efficiency is a new approach to dust removal that achieves impressive filtration results, even in particularly difficult applications. High mechanical stability of the filter material ensures long service life. Compared to conventional rigid filters it causes minimal pressure loss. Short compressed air pulses during the filtration process ensure effective filter cleaning. 7.5 Kw fan Efficiency 5600 m3/h Sinbran filter inserts 12 pcs. Negative pressure 3000 Pa

Condition: excellent (used), Year of construction: 2019, operating hours: 2,595 h, filter area: 302 m², suction capacity: 13,250 m³/h, negative pressure: 7,230 Pa, The Gold Series industrial dust collector is a leading dust and fume extraction system for welding, grinding, thermal cutting, shot blasting, sandblasting, and glass bead blasting. Ideal for retaining toxic and flammable dust and fumes. The vertically mounted cartridge filters in the Gold Series dust collector use the patented HemiPleat technology, which keeps them cleaner and lasts longer than conventional pleated filters. Vertical operation of the filter elements allows for their effective cleaning with a compressed air pulse. Filter cartridges with different properties provide the best cleaning efficiency for different types of dust, including fine, fibrous and heavy dust loads. The filter is pneumatically cleaned with compressed air pulses during operation, which ensures high efficiency of the device. Csdpevu Tpcefx Afpegn Fan on the clean side, which reduces the risk of explosion to a minimum. Brand: Camfil Model: Gold Series GS10 Year of production - 2019 Worked hours - 2595 h New HemiPleat eXtreme Flame Retardant cartridge filter cartridges - 10 pcs. Filtration area 302 m2 37 Kw fan. Efficiency 13250 m3/h Negative pressure 7230 Pa Inlet diameter - 500 mm Equipped with HEPA H14 Absolute VGXL fine filters and a noise silencer. The device worked on grinding stainless steel. The device is in very good condition (like new), it worked inside the room.

Condition: not inspected (used), Welding fume extraction,dust extraction,self-cleaning filter,pneumatic,vacuum. For welding,grinding,sandblasting and all kinds of dry dust. Cartridge filter cartridges. The filter is cleaned pneumatically by impulses of compressed air during operation, which makes the device highly efficient. Cjdpfjip Nktjx Afpsgn Fan of 3,2 Kw Efficiency 1600 m3/h

Year of construction: 2000, condition: good (used), Welding fume extractor,dust extractor,self-cleaning filter,pneumatic,vacuum brand ESTA Model: SRF P13 JET For welding,grinding,sandblasting and all kinds of dry dust. Cgedpeirt Amjfx Afpon The filter is cleaned pneumatically with compressed air pulses during operation, thus high efficiency of the device. 3 Kw fan Efficiency 1850 m3/h Filtration area - 15 m2 Vacuum pressure - 4300 Pa Inlet diameter - 2 x 160 mm Year of manufacture: 2000