Sliding table format saw

ALTENDORF F45

Condition: good (used), Year of construction: 2016, BG Cam 1325 ATC, Year of manufacture 2016, Siemens 808 D control system, Travel X/Y/Z 1270/2540/150 mm, High pressure vacuum table, Table with 4 zones, Yaskawa servo motor drive, rapid traverse X/Y 35 m/min, rapid traverse Z 15 m/min, Resolution 0.001 mm, repeat accuracy 0.01 mm, Spindle speed up to 24,000 rpm, new spindle 2024, ER 25, 6-station tool changer, linear guides, tool length measurement, Kdodpeuhzyqjfx Aadow vacuum pump, suction foot,

Condition: used, Year of construction: 1995, cutting diameter 280 mm saw band length 4200 mm cutting width 280 x 280 mm dimensions of saw-band 4200 x 34 x 1,1 mm cutting speed 18 - 115 m/min multiple feeding 0 - 6000 mm power capacity 3,0 kW voltage 400 V total power requirement 5,0 kW weight of the machine ca. 2,3 t Ksdpfjp Rai Eex Aadjdw dimensions of the machine ca. 2,35 x 2,40 x 2,00 m - serial-no.: 6082 - control: SIEMENS COROS - OP 15 - chip conveyor - multiple feeding - coolant equipment

Condition: used, Technical data: Max planing width: 630 mm Max planing height: 250 mm Number of knives: 4 1 roll in the table top Power supply: 400V Kdodpfsgykicex Aadsw Engine power: 5.5 kW Feed speed: 6-18 m / min Electric lifting Extraction connector Producer: Steton Overall dimensions: Length: 1220 mm Width: 1330 mm Height: 1370 mm

Condition: used, functionality: fully functional, Year of construction: 2019, operating hours: 1,190 h, load capacity: 2,000 kg, lifting height: 5,080 mm, free lift: 1,780 mm, fuel type: electric, mast type: triplex, construction height: 2,260 mm, power: 9 kW (12.24 HP), fork length: 1,200 mm, empty load weight: 3,681 kg, total length: 2,210 mm, drive type: Elektro, construction width: 1,160 mm, Electric 3-wheel forklift Load center: 500 ISO class: ISO class 2 = 1,000 - 2,500 kg Mast type: Triplex Speed class: 20 Technical condition: Very good Front tires Type: Non Marking Front tires Size: 180/70-8 Front tires Condition: 80 - 100% Rear tires Type: Non Marking Rear tires Size: 15 x 41/2 Rear tires Condition: 80 - 100% Battery Volt: 48V Battery Ah: 750Ah Battery year of construction: 2019 Battery condition: 80 - 100% Sideshift, 3rd valve, 4th valve, rear working lights, front working lights, CE certificate, Kdjdourz Spspfx Aadew

Condition: new, Year of construction: 2024, ON STOCK!!! Pre-milling unit End Trim saw Top and Bottom Trimming unit Corner Rounding Unit Surface Scraper Touch Screen Controller Max. edge thickness: 3mm Min./max. workpiece thickness: 8–50mm Min. workpiece length: approx. 160mm Feed speed: 10 m/min. Ready to operate: approx. 3.5min. Power consumption: ∅ approx. 7.4kW Electrical connection: 400V/3Ph/50Hz Table height: approx. 900mm Machine dimensions: approx. 4,050x1,300x1,400mm (LxWxH) Weight: approx. 820kg Exhaust connection: ∅ 1x140mm Edge Banding Machine with PLC Premilling (DIA-tools incl.) up to max. 2 mm milling depth Corner rounding unit Radiusmilling R=2 mm Radius edge milling R=2 mm Kdedpsglfwtefx Aadew radius profile scraper

Condition: used, Number of spindles 6 St. Working width 240 mm Working height 200 mm Length of the planing table 2500 mm Feed motor 4 kW Feed speed 6-36 m/min. Dimensions (L/W/H) 5000 x 1750 x 1700 mm Kedpevnv Uzjfx Aadodw SCM Superset PLUS Comp. 31 also for window production ----- Machine is cleaned and functionally checked ! Technical data: ----- Working width: max. 240 mm Working height: max. 200 mm Feed: 6 to 36 m/min 1. Spindle ----- First lower spindle horizontal Motor with brake 11 KW Diameter: 40 mm Speed: 6,000 rpm 2. Tool holder HSK ----- First right tool holder vertical Motor with brake 7.5 KW Speed: 8,300 rpm Vertical and horizontal electronic positioning 3. Tool holder HSK ----- First left tool holder, vertical Motor with brake 7.5 KW Speed: 8,300 rpm Vertical and horizontal electronic positioning Electronic adjustment of the tool diameter (setup) 4th spindle ----- First upper spindle, horizontal Motor with brake 11 KW Speed: 8,300 rpm Vertical and horizontal electronic positioning Electronic adjustment of the tool diameter (setup) 5th spindle ----- Second upper spindle, horizontal Motor with brake 7.5 KW Speed: 8,300 rpm Vertical and horizontal electronic positioning Electronic adjustment of the tool diameter (setup) 6th spindle ----- Second lower spindle, horizontal Motor with brake 7.5 KW Speed: 8,300 rpm Vertical and horizontal electronic Positioning Other technical features: ----- 2 feed units after the upper spindles for shortening the axis distance from 620 mm to 450 mm Air cushion lubrication in the work table Flange feed rollers before and after the left vertical spindle with electronic (CNC) telescopic adjustment 2 x milling unit with belt drive with quick-change system HSK 85 in position 2 – 3 Working height 200 mm instead of 120 mm 5 x electronic horizontal positioning position (2 – 3 – 4 – 5 – 6) + (31.14.05 tandem feed after position 2) 4 x electronic vertical positioning position (2 – 3 – 5 – 6) 3 x electronic setting of the tool diameter (setup) position (3 – 4 –5) Mobile control 10 PRL equipment for removing the glass strip on the 2nd upper horizontal spindle Machine without processing tools (technical data according to the manufacturer - no guarantee!)

Condition: new, Year of construction: 2024, The machine is on stock!!! Max. edge thickness 3 mm Min./Max. workpiece thickness 8 – 50 mm Min. workpiece length approx. 160 mm Kdsdpehymgdofx Aadsw Feed speed 10 m/min Gluepot heating time approx. 3.5 minutes Power consumption Ø approx. 7.4 kW Electrical connection 400 V/3 phase/50 Hz (Transformed to your voltage) Table height approx. 900 mm Machine dimensions (LxWxH) 4300x1300x1400mm Weight approx. 900 kg Exhaust connection Ø 1 x 140 mm

Condition: new, Year of construction: 2025, Description Technical data Scope of delivery Accessories Equipment options Ideal for demanding craftsmen and carpenters The extra long dressing tables in one piece allow easy dressing of the workpieces Worktables are made of grey cast iron, therefore insensitive and permanently flat Backward opening dressing tables with tension spring support for fast and convenient changeover Thanks to the permanently mounted suction hood, it is not necessary to change the suction hose during changeover, which saves valuable working time Helical toothed steel infeed roller ensures constant and even wood infeed Rubber pull-out roller in the thickness outlet ensures even wood pull-out Material feed with four speeds Planer thickness table adjustment via handwheel with integrated display for planing height DIGITAL version: with electrical thicknessing table height adjustment and digital display On and off switch in operator position Powerful industrial motor The high machine weight ensures highest precision and smooth running. Preparation for long hole drilling device Quality Made in Italy Dimensions and weights Length approx. 2250 mm width/depth approx. 1370 mm Weight approx. 695 kg Dresser Total length of the tables 2250 mm Chip removal max. 5 mm Stop length 1200 mm Fence height 150 mm Dust extraction connection Kedeff Hdpopfx Aadedw Suction nozzle diameter Thickness 1 x 120 mm Drive power Main engine 7 kW Installation information Space requirement Length 2250 mm Space requirement width/depth 1440 mm Explanation Place [...]

Condition: new, CATALOGUE NUMBER HZ0001 PRODUCT FEATURES As standard, they have mobile containers for sawdust, equipped with a pressure system that allows for tight connection of the container with the machine structure. Thanks to this, it is possible to achieve high negative pressures, without losses at individual connection points. Contaminants from the filter fall directly into hermetic containers with the possibility of quick unloading, which have a special suspension system and mobile wheels allowing for easy and quick transport and maneuvering. The 5.5 kW / 6500 m3/h negative pressure fan, at 2 800 Pa, operates on the principle of a turbine, and the soundproofed design of the fan allows for a significant reduction in the noise emitted during operation. The certified control cabinet allows for constant monitoring of the correctness of operation, thanks to the possibility of any location far from the machine. Standard with integrated fan control system and filter cloth cleaning system ADVANTAGES - new machine - CE certificate - high efficiency - professional Scope of delivery: Polyester filter, 5 microns 2 Containers Drive system Filter cleaning using a vibration system with control Kododf S Szepfx Aadsdw TECHNICAL DATA - extraction capacity approx. 6500m3/h - engine power 5.5kW - rotational speed 3000 rpm - voltage 400V, 50Hz - extraction nozzle 280 mm - filter surface 16.3 m2 - extraction speed 28 m/sec - number of filters 35 - negative pressure 2800 Pa - filter category G - filter material polyester - dimensions length/width/height 921x1982x2271mm - weight 350kg Net price: PLN 16,000 Net price: EUR 3,810 Net price calculated according to the exchange rate of PLN 4.2/EUR (in case of larger exchange rate fluctuations the price may change)

Condition: good (used), Year of construction: 2010, LZ-Lathe Fabr.JET Type :GHB-1330 Bj.2010 with 3 ash digital indicator, 3 jaws lathe chuck DM 160 mm tool holder Multifix size A, 2 steady rests coolant device. Turning diameter overbed: 330 mm Turning diameter over face: 197 mm Center width: 750 mm Spindle speeds: 70-2000 rpm spindle bore : 38 mm Machine in good condition from the training workshop Machine documentation available . Kedpfjqwgzqjx Aadedw