Screw compressor ZR160VSD

Atlas Copco ZR160VSD

Condition: excellent (used), Year of construction: 2002, operating hours: 1,22,000 h, functionality: fully functional, overall weight: 3,000 kg, total length: 25,400 mm, total width: 1,600 mm, total height: 2,000 mm, power: 165 kW (224.34 HP), fuel type: electric, volume flow: 1.56 m³/h, operating pressure: 8 bar, noise level: 65 dB, Equipment: documentation/manual, refrigerant dryer, type plate available, Continuously serviced, excellent condition. Atlas Copco ZR160 VSD screw compressor With speed-controlled drive, adsorption dryer MD400 Compressor: Manufacturer: Atlas Copco Type: ZR 160 VSD Max. operating pressure: 8.6 bar Variable speed drive Cooling water consumption 2.1 liters/s Itodpsrn S Hpefx Aitef Air supply: 27 m3/min Water cooled Oil free Power: 163 kW Year of construction: 2002 Uptime: 122499 Last service: September 20, 2023. Refrigerator: Manufacturer: Atlas Copco Type: MD 400 W Year of construction: 2002 Max. operating pressure: 10.5 bar Empty volume: 199 l

Year of construction: 2020, condition: ready for operation (used), A Rico compressor system consisting of two Atlas Copco compressors, two refrigerant dryers and an Atlas Copco Beko oil-water separation system is available. Screw compressor Atlas Copco GA 45 VSD+, year of manufacture: 2020, air volume flow: 9.4m³/min, operating pressure: 13bar, motor power: 45kW, motor speed: 4500rpm, machine dimensions X/Y/Z: approx. 1200mm/1100mm/2000mm, weight: approx. 860kg. Screw compressor Atlas Copco GA 45 VSD FF, year of manufacture: 2012, power: 45kW, operating pressure: 18.5bar, speed: 3000rpm. 2x refrigerant air dryers Atlas Copco FX 15, air volume flow: 15m³/min, operating overpressure: 13bar, pressure drop: approx. 0.3bar, refrigerant: R410A, refrigerant charge: 2050g, max. inlet air temperature: 60°C, machine dimensions X/Y/Z: approx. 900mm/750mm/1000mm, weight: approx. 160kg. Compressor management system Atlas Copco Equalizer 4.0/ES6-MK5, control range: 2-6 compressors. Oil-water separation system Beko ÖWAMAT 15, throughput range: 6m³-30m³/min, oil outlet: DN40, container volume: 115.5l, filling volume: 84.3l, oil collection container: 2x10l, max. operating pressure: 16bar, machine dimensions X/Y/Z: approx. 1100mm/550mm/800mm, weight: approx. 40kg. System operating hours: 8656h, controller hours: 42334h. Documentation available. An on-site inspection is possible. Itsdpfx Ajxdc Uvsitjf

Year of construction: 2008, condition: ready for operation (used), Operating pressure: 13bar, volume flow: 17.07m³/min, motor power: 90kW, motor speed: 3480rpm, weight: approx. 1750kg. The frequency converter of the machine is defective. An on-site inspection is possible. Itedsxmkc Tjpfx Aitsf

Condition: new, An additional aircompressor are required to enable the nitrogen generator to produce nitrogen. Itedpfx Aoxfrv Eeitsf Nitrogen purity: 99.999% Input pressure: 8Bar Output pressure: 7Bar Power: 75W(Power is the cost per hour to produce nitrogen ) 3 în 1 design, no need for extra air compressor and refrigerator or dryer Gas clean

Condition: like new (used), Year of construction: 2015, nominal power: 1,300 kW (1,767.51 HP), rotational speed (min.): 1,493 rpm, rotational speed (max.): 1,493 rpm, input voltage: 6,000 V, input frequency: 50 Hz, overall weight: 6,100 kg, 1 asynchronous electric motor Manufacturer: Reform Elektromotorenbau GmbH Type: Y2-500-4 Power: 1300 kW Speed: 1493 rpm Voltage: 6000 volts Current: 151.4 A cos Φ: 0.86 Insulation class: F Frequency: 50 Hz Protection class: IP55 Design: Foot (B3) Operating mode: S1 continuous operation Weight: 6100 kg Itsdpfjv I Alysx Aitjf Year of manufacture: 12/2015 Bearings: NU228C3 / 6030C3 and NU228C3 Cooling: Air Shaft height: 500 mm

Condition: excellent (used), Year of construction: 2014, We are offering an x2 ATLAS COPCO ZR 400 7.5 compressor with the following specifications: Max working pressure: 7.5 bar Hours: 53000 Input power: 355 kW Rotational shaft speed: 1485 rpm Year of manufacture: 2014 The compressors were removed from a company that ceased operations. Additional Equipment Included: The compressors comes with x2 Atlas Copco air dryer, Model: MD1000 W CE, featuring: Max working pressure: 10.5 bar Itjdpfju Szu Nex Aitjf Year of manufacture: 2014 Please include your price offers directly when reaching out to us

Condition: good (used), Year of construction: 2000, Three-phase motor, electric motor -Power: 250 kW Itodpfxjpmdalj Aitjf -Speed at 50 Hz: 2985 rpm -Speed at 60 Hz: 3580 rpm -Shaft: Ø 65 mm -Height of shaft axis: 350 mm -Recess: Ø 680 mm -Flange: Ø 800 mm -Protection class: IP 55 -Design: B3B5 -Dimensions: 1400/800/H1070 mm -Weight: 1500 kg

Condition: excellent (used), Year of construction: 2018, operating hours: 34,656 h, functionality: fully functional, Second hand Atlas Copco GA250VSD, year of manufacture 2018, approximately 34,656 operating hours. 10 bar with 44.90 m3/min. 250 kW. Iodpfxjw Ewd Rj Aitetf

Condition: used, Year of construction: 1973, overall weight: 8,000 kg, output current: 192 A, nominal power (apparent): 1,680 kVA, continuous power (apparent): 1,680 kVA, MTU EZ531, type MB16v652, 1973 + ASEA GF 630L generator Itedpfevu T Npsx Aitof

Condition: used, Year of construction: 2010, functionality: fully functional, Manufacturer: Atlas Copco Manufacturing year: 2010 Type: ZT132VSD-FF Isdpjuh N S Iofx Aitjtf Power: 132kW/50Hz Max. pressure: 8.6 bar Air delivery: 19.5 m³/min Operating hours: 71 979 h Dimensions: 4040mm L x 1650 W x 2000 H Net weight: 3700 kg