DOUBLE-SIDED SQUARING MACHINE

BIESSE STREAM SB2 10.5

Condition: excellent (used), Universal DOUBLE-SIDE SIZING & EDGE BANDING MACHINE (for both 1st and 2nd pass) Edges (tape) thickness in rolls (min/max) mm 0,3 - 3 Panels thickness (min/max) mm 10 - 60 Working width (min/max) mm 240 - 2700 Numerical Control PC Base Windows /Software SINITRA Adjustable feeding speed (m/min ) 10 - 40 (INVERTER C.N.) Distance (center-axes) of the Disappearing Dogs (mm) 500 SIZING PART (for each side): Anti-chipping Milling Unit AS 10 (Kw 5,8) pneumatic N° 2 Hogging Units (1 Top + 1 Bottom) DT 10 (Kw 5,8 x 2) Spraying unit (Anti-sticking liquid) EDGE-BANDING PART (for each side): 1° Glueing Unit (Hot Melt + Quick Melt Unit) SP30 (High Melt + Edge Control EC 40) 2° Glueing Unit (Thermofusion with hot air) Air Force System Band Pressure zone (N.C. adjustment) . Edge coils supporting unit (No. 6 reels) Snipping (end-cutting) unit IT 90-X (Kw 0,65 x 2) speed 28m/min. 0 - 25° Rough Trimming unit RS 10 (2 x Kw 2) Ijdpfsu Rc Anox Adwoht Fine Trimming unit (Multi-profile, by N.C.) RF 40 (Kw 1 x 2) 0 - 25° Multi Function Unit (Profile contour Trimming unit) AR 80 (Kw 0, 65 x 2) max speed 25 m/min - ROTAX motors with automatic tool change (tools) Profile Scraping unit (Multi-profile, by N.C.) RB 40 (multiprofile) Glue scraping unit RC 20 + Spraying Unit (for polishing liquid) Buffing unit SZ 30 (Kw 0,37 x 2)

Condition: used, Year of construction: 2008, UNIVERSAL DOUBLE-SIDE SIZING & EDGE BANDING MACHINE FOR 1st AND 2nd PASS * Numerical Control / Software: SINITRA Iodjxrc Hnspfx Adwoht * Adjustable feeding speed (m/min): 10–40 (INVERTER C.N.) * Safety and sound-proof enclosures/cabins. * Working line (work units support tables), manual adjustment. * Distance (center-axes) of the disappearing dogs: 500 mm SIZING PART (for each side): * Anti-chipping Milling Unit AS 10 * N° 2 Hogging Units (1 Top + 1 Bottom) * Pre-Milling Unit EDGE-BANDING PART: * Glueing Unit: Hot Melt + Quick Melt Unit * Edge magazine with 6 positions * Snipping end-cutting unit * Rough Trimming unit * Fine Trimming unit 0 - 25° * Multi Function Unit - Profile contour Trimming unit with 4 Motors * Combined Milling grooving Unit: Horizontal + Vertical * Profile Scraping unit - Multi-profile, by N.C. 2 positions * Glue scraping unit * Buffing unit * Hot Air Heater to reactivate the color of plastic tape TECHNICAL DATA * Workpiece width: 240 – 1200 mm * Workpiece length: 240 – 2700 mm * Workpiece thickness: 10 – 60 mm * Edge thickness: 0,3 – 3 mm * Panel thickness: 10 – 60 mm * Edge height: 15 – 65 mm * Working table height: 950 mm WORKING UNITS * Anti-splint milling unit * Milling unit with pneumatic time entry AS10 * Double-hogging milling unit DT 10 * No. 2 anti-adhesive units * Edgebanding unit SP30 * Roller set to press the edge on straight profiles – 1 + 3 pressure rollers – motorized regulation of depth position automatically by numerical control * Edge magazine – 6 positions for SP10, SP20, SP30, SP40 * End cutting unit IT90-S * Milling unit RF10, straight tools * Multifunctional milling unit AR30 R=2 mm * Edge scraping unit RB10; R=2 mm * Glue scraping unit RC20 * Brushing unit SZ30 * Hot Air Heater (to reactivate the color of plastic tape)

Condition: used, Double edgebanding machine BIESSE STREAM SB2 10.5 usable as 1st and 2nd machine in a edgebanding line Numerical Control with Sintra Software Machine suitable for 1st + 2nd pass of the panel Opening of the mobile shoulder motorized by C.N. mm 3000 Panel height 60 mm Pvc/Abs mm 3 Continuously variable feed speed from C.N. (up to 40 m/min) Working height electronically adjustable by C.N. (up to 60 mm) Opening of the moving shoulder electronically adjustable by C.N. Motorized rubber belt with higher pressure Track with bearings with hidden pins - distance between PINS mm 500 Automatic system for supporting large panels Anti-adhesive group Iodeu Rim Hspfx Adwsht Part to be squared composed of (for each side): * Automatic timed anti-splinter group * Double shredder group * Two-motor grinding group Border part composed of (for each side): * Gluing unit for EVA hot melt glue with pre-melter * Edge pressure group on straight profiles with electronically adjustable pressure rollers by C.N. * 6-position reel magazine with automatic edge change by C.N. * End trimming unit with 2 motors with automatic inclination * Overlapping trimming group with 2 motors * Edge trimming group with 2 tilting motors electronically adjustable by C.N. * Multifunction rounding unit with 4 motors (cornering tool + rounding tool) with numerical control adjustment automatically * Toupie Group (with 2 motors on the fixed left side \ with 1 0-90° tilting motor on the mobile right side) * Electronically controlled edge scraper group by C.N. * Glue scraper group * Oscillating brush group * Phon group

Condition: ready for operation (used), Technical characteristics Panel width : 240 mm to 1200 mm Panel length : 240 mm to 3000 mm Panel thickness : 10 mm to 60 mm Ijdpfx Adjtrihvowoht Band thickness : 0,3 mm to 3 mm Pin inner axis : 500 mm ENTRY / EXIT : Transfer realised with special chains covered in stainless long lasting rubber Entry pivoting guides adjustable depending on panel type Closing device on above pressor to assure the pressing of the panel against the pins Delaying device in entry for optimization of different width panel dimensions Single part rigid structural longitudinal chassis ADVANCE CHAIN : Continuous speed tuning from 10 to 40 m/min by INVERTER CN direct numerical command The stop pins are automatically adjusted in height by CN and can have : height/thickness 12- 18-23 mm from the chain level Chain pin inner axis 500 mm BELT PRESSOR SOUNDPROOF CABINS All machining groups inside the machine are surrounded by soundproof material Internal lighting CN command placed at entry of the machine, fixed chassis side NUMERICAL CONTROL Video interface Positioning axis control Chain advance speed tuning Pressor height adjusting depending on panel thickness Automatic adjustment of band changing and band charger Moulding list management Sequenced motor startup Possibility of connection to a barcode reader Module NC410 MILLING GROUP Timed pneumatical anti shard action for transversal milling Tool rotation speed : 6000 rpm Motor power : 5.8 kW Tool Ø : 200 mm DOUBLE SUPERPOSED SPLINTERS Simultaneous displacement for thickness adjustment and independent adjustment vertical and horizontal Cast iron bearing structure Tool speed rotation : 6000 rpm Motor power : 5.8 kW Tool Ø : 205 to 250 mm EXTENSION MACHINE to 3200 mm AUTOMATIC CENTRAL SUPPORT 10.5 This device allows support of parts that due to their dimensions or thickness can subdue central bending Fully automatic activation GLUING GROUP SP3 Straight bands in resin, melamine, ABS, PVC, PP EVA basis thermoplastic glue Independent Teflon covered changeable glue tank Glue level sensor inside the tank Glue input roller speed synchronized with the chain advance Breveted pre fusion device Glue granule container (8kg) Band presence detection device Automatic band changing procedure 6 POSITION MOBILE BAND CHARGERS END CUTTING End cutting unit for edge thicknesses up to 3 mm Device for quick removal in stroke Automatic exclusion of the unit when the motors are stopped Speed : 12000 rpm Panel projection : 35 mm Edge thickness : 0.3 to 3 mm Panel thickness : 10 to 60 mm Interval between 2 consecutive panels : 350 mm WHOLESALE TRIMMING UNIT 2 superimposed motors with horizontal axis Automatic pneumatic exclusion of the group Speed : 12000 rpm Motor power : 1.3 + 1.3 kw Panel thickness : 10 to 60 mm Tool diameter : 80 mm ANGLE TRIMMING GROUP The adjustment of the position of the tool in relation to the material is automatic with predefined dimensions on 4 pre-adjustable in-line stops The in-line stops are automatically selected by the control Use on the MULTIPROFIL tool group to change profile/shape without replacing the tool Tools are equipped with 20° chamfer and 1.5-2-3 mm radius Speed : 12000 rpm Motor power : 0.65 + 0.65 kw Panel thickness : 10 to 60 mm TOP / BOTTOM ROUNDING GROUP Rounding copier for the upper and lower stops of the panel with oscillating movement for the continuation of the panel Quick release system of the motor-holder groups Automatic exclusion of the tool with stopped motors Tool rotation speed : 12000 rpm Motor power : 0.3 kw