Climate test chamber, 6000 litres (6 m³)

CTS CW-60/6 -60°C bis +120°C

CTS CW-60/6 – Climate Test Chamber, Water-cooled

The CW-60/6 from CTS GmbH (Climatic Test Systems) is a medium-sized, walk-in or drive-in climate chamber designed for conducting temperature and humidity tests on multiple test specimens simultaneously.

Device Description
The climate test chamber allows for the testing of functional or material properties of a specimen under the influence of temperature and humidity.
Efficient air circulation with a high recirculation volume ensures optimal heat transfer to the test specimen.
The air conditioning compartment is located at the rear of the interior section.
The technical assemblies are housed in a separate frame behind the unit, allowing easy access.
The control system is housed in a separate control cabinet.
The operating panel is integrated into the control cabinet door.
For dehumidification, the test chamber is equipped with a self-regenerating compressed air dryer.
The test chamber can be purged with fresh air via a fan.

Dkodpfx Aowu Epgehxeu
Technical Performance Data:
Temperature Testing:
Temperature range: -60 °C to +120 °C
Temperature deviation: ±0.5 to 1 K over time
Temperature change rate linear with test specimen,
measured in supply air:
Heating: 1 K/min from -40 °C to +80 °C
Cooling: 1 K/min from +80 °C to -40 °C
Test specimen: 700 kg steel
Thermal radiation:
2 kW during temperature change
5 kW steady-state at -40 °C
Climate Testing:
Temperature range: +10 °C to +95 °C
Humidity range: 10% to 85% RH
In dew point mode: +5 °C to +89 °C
Temperature deviation: ±0.5 K over time
Humidity deviation: ±1 to ±3% RH over time
Technical data refer to an ambient temperature of +25 °C,
nominal voltage 400 V, without test specimen, without irradiation,
and without additional equipment.

Dimensions:
Internal dimensions (test chamber / usable space):
Volume: approx. 6,000 liters (6 m³)
Internal dimensions (approx.): Height: ~2000 mm Width: ~2000 mm Depth: ~1500 mm
(slight variations possible depending on configuration)
External dimensions: Height: ~2300–2500 mm Width: ~2400–2600 mm Depth: ~1800–2200 mm
(depending on door, frame, accessories, etc.)

Operating Data:
Electrical connection: 400 V +6/-10%, 3/N, PE, 50 Hz
Rated power: 44.4 kW (incl. 5 sockets)
Rated current: 84.7 A
Protection class: IP54

Technical Design:
Cooling unit:
water-cooled, low noise, semi-hermetic,
stepless power adjustment via electronic
monitoring and control system,
environmentally friendly refrigerants R23 / R404A

Notes
Inspection possible by appointment (46325 Borken)
Shipping by freight carrier possible – costs & organization upon request
Scope of delivery: (see image)
(Specifications subject to change and error!)
For further questions, please contact us by phone.

The listing was translated automatically. Translation errors are possible.