Accelerometer with recorder

Geosig GMSplus-IP67

Condition: excellent (used), Year of construction: 2012, section dimension max. 150 x 50 mm pipe Ø 50 – 150 mm wall thickness 1,5 - 5,5 mm reference material (tensile strength) 600 N/mm² coil Ø max. 2.100 mm coil weight max. 10 t finish pipe length max. 9.000 mm round pipe Ø according to list rectangular pipe according to list speed 100 m/min working direction left → right The line consists of: 1. entry part: double carousel decoiler coil opener/pinch roll unit/leveller crop shear strip tail end welding machine strip guide strip twister/pinch roll unit/strip accumulator entry strip accumulator edge trimming exit twister 2. forming part: Gujdpfx Ahsuc Sw Ae Djk No. of horizontal stands: 4 No. of vertical stands: 3 3. welding part (HF) 4. calibrating part 5. separation 6. edge bevelling 7. blowing out 8. bundling 9. hydraulics 10. electrics

Condition: excellent (used), Year of construction: 2023, Mobile 3D coordinate measuring machine Camera, hand probe with display Guodpfx Asu S Rnleh Dok Max. Measuring length 10000/3500/3500 mm Certified measuring range 3000/1500/1500 mm Triple camera Integrated measuring probe camera Measuring accuracy ±(28 + 5 L/1000) μm* Repeatability ±10 μm* Accessories

Condition: like new (used), turning diameter: 1,500 mm, MAXIMUM WORK DIAMETER : 1600 mm. MAXIMUM WORKING LENGTH : 3000 mm. DIAMETER OF LANTERN SHAFT : 83 mm. OUR MACHINE IS ACTIVE WITHOUT ANY PROBLEMS ALL REVOLUTIONS AND AUTOMATICS ARE IN VERY GOOD CONDITION Gujdpfxsr Ui R Nj Ah Djk

Condition: refurbished (used), Year of construction: 1974, functionality: fully functional, machine/vehicle number: 1276, CNC Hot Radial Forging GFM SX-13 New in 1974 / 2022 Gedpfoq U R T Nsx Ah Dsuk New control system PLC SIEMENS S7 Machine number: 1276 No. of Hammers: 4 Forging force each hummer: 160 Ton Hammer stroke / min: 700/min Hammer lenght: 240 mm Diameter setting range: 80 mm Maximum forging diameter: Structural steel, round-cross section: Ø 130 mm square cross section: Ø 115 mm Smallest dimensions forged: Ø 25 mm Manipulator A max. displacement: 6820 mm Manipulator B max. displacement: 7150 mm Maximum workpiece length: 6000 mm Rapid speed manipulator: 400mm/sec Total connected power: 300 kW 380 V, 50 Hz Machine dimensions: Forging height over floor: 615 mm Total height pf the machinr over floor: 1665 mm Total machine lenght: 32670 mm Total foundation lenght: 33400 mm Tot. machine width (without auxliary equipments): approx 3885 mm Total foundation width: 16000 mm Total weight of the machine: 84.000 Kg

Year of construction: 2008, condition: ready for operation (used), Loading chamber dimensions: 280x580mm, loading height: 700mm, max. load: 300kg, with protective housing and documentation, machine was functional until the end, complete maintenance would have to be carried out on the machine, inspection is possible. Gsdeqgfbgepfx Ah Djuk

Year of construction: 2000, condition: excellent (used), SMS MEER CNC DOUBLE SIDED CHAMFERING MACHINE Manufacturer: SMS MEER Type: RFA 14 Yom: 2000 Working range: tube Ø 21,3 – 114,3 mm Wall thickness 2,3 - 11 mm Gsdpfjghrguex Ah Dsuk Length: 6-12m Composed of two RFA14 chamfering machines with transport devices between the machines. The task of machines is to chamfer inside and outside both ends of the tubes. The range of diameters of chamfered tubes 21.3-114,3mm and wall thickness of 2.3-11mm in the length range of 6-12m. The task of transport in the area of the chamfering machines is to collect the tubes from the roller table and move them between the chamfering machines.

Condition: excellent (used), functionality: fully functional, turning diameter: 1,000 mm, turning length: 8,000 mm, total length: 10,500 mm, A used lathe from the Italian manufacturer Leopolod Pontiggia, model NH 500, is for sale. Technical specifications: Turning diameter over bed: 1,000 mm Gusdpfx Ajv Epigeh Dsk Turning length: 8,000 mm Extensive equipment as in the photos: 1 x 3-jaw chuck 1 x 4-jaw chuck 1 x steady rest + various adapters

Condition: refurbished (used), Year of construction: 1988, functionality: fully functional, Löser centerless tube grinding machine - belt grinding machine - polishing machine - Cylindrical grinding machine Centerless tube grinding / polishing machine for workpieces with a minimum length of 1100mm. The machine was built in 1988 and was completely overhauled in 2012. The machine was converted for polishing and then only polished around 10,000 parts. The machine was no longer used after that. During the general overhaul, the motors, bearings and the entire control cabinet with the frequency converters were completely replaced. The machine can be used for both wet grinding and polishing. Wastewater treatment including pumps is not yet available. We can retrofit these for you free of charge according to customer requirements. The transport systems (roller conveyors) between the grinding stations must also be retrofitted to suit your workpieces. The machine can process pipe diameters from 10mm to 160mm. The grinding motors / polishing motors have an output of 7,5kW per station. The system can be viewed by appointment in our warehouse in D-63128 Dietzenbach. Guodpjpugwiofx Ah Dsk

Condition: used, Hydraulic pump, oil pump, gear pump, vane pump, hydraulic unit, double hydraulic pump -Double hydraulic pump: from injection molding machine KHS Krauss Maffei KM 1000-5000A -Pump 1: Voith type IPH 6/5-125/50 300 bar - Pump 2: Voith type IPR/H 6/5-125/40 210/300 bar -Drive: Loher type? Guodpfx Aheg Avqco Djk -Individual components: filters/valves see photos -Dimensions: 2285/800/H900 mm -Weight: 1132 kg

Condition: as good as new (ex-display), Year of construction: 2025, New machine, in stock, available for immediate delivery -Capacity: 18,000 liters -Max. temperature: 350°C -Internal dimensions (L x W x H): 4100 x 2100 x 2100 mm -External dimensions (L, with rails): 9970 x W 3060 x H (with lifting door) 6110 mm -Eurotherm Nanodac control system -Temperature stability (at nominal temperature, without load): ±5°C -Automatic supply and exhaust air dampers Guedpfx Ahju Hma No Dsk -Electric lifting door -Electrically driven hearth cart -Power: 247 ± 9% kW -400 V, 50 Hz -Documentation, CE declaration We are happy to offer installation, commissioning, and operator training for your staff. Contact us! We stock new and used industrial furnaces. Viewing at our warehouse possible by arrangement! Furnace, Furnaces, Annealing furnace, Kiln, Hardening furnace, Heat treatment furnace, Oven, Tempering furnace, Curing furnace, Drying oven, Industrial furnace