Panel dividing system

HOLZMA HPP 380/43/43 NEW PROFILINE

Condition: ready for operation (used), Year of construction: 2011, machine/vehicle number: 0-240-10-3388, functionality: fully functional, operating hours: 565 h, cutting width (max.): 4,250 mm, controller model: POWER CONTROL CADmatic 4 PROFESSIONAL, section length (max.): 4,300 mm, working height: 920 mm, Lightly used machine! TECHNICAL DETAILS Cutting length: 4,300 mm Cutting width: 4,250 mm Saw blade projection: 95 mm Working height: 920 mm Speeds Saw carriage feed forward: 1–150 m/min Saw carriage feed backward: max. 150 m/min Program pusher speed forward: 90 m/min Program pusher speed backward: 90 m/min Angle cutting package Maximum panel thickness: 48 mm Leg length at 45°: min. 115 mm Angular accuracy at 1,000 mm: 0.1° Cutting angle: min. 0.0° MACHINE DETAILS Control system: POWER CONTROL CADmatic 4 PROFESSIONAL Main unit motor power: 13.5 kW Scoring unit motor power: 2.2 kW Nodpfx Ahjyla I Ro Rokw Mains voltage: 400 V Frequency: 50 Hz Required air pressure: 6 bar Compressed air consumption: 120 NL/min Extraction connection speed: approx. 26 m/s Negative pressure: 1,200 Pa Exhaust air volume: 3,800 m³/h Extraction connection—chip duct: 1 x 200 mm Extraction connection—pressure beam: 1 x 150 mm Operating hours: 565 h EQUIPMENT Power Concept Angle cutting package Groove-cutting package Automatic ejector rule Labelling package Data linkage to storage systems Note: Further details regarding machine configuration can be found in the attached document.

Condition: used, Year of construction: 2018, functionality: fully functional, SCM Olimpic K 560 Automatic Edge Gluing, year 2018 for sale! Complectation: Chain feed speed 12/18m/min Edge thickness 0.4/3mm EVA glue Panel milling unit "RT-V" Glue application unit "VC-S4.1" Edge trimming unit "K-SEL" Edge milling unit "R-K" Edge corner rounding unit "ROUND X" Edge scraping unit RAS-K Polishing unit SP-V Technical characteristic: Conveyor speed (two speeds) m/min 12 - 18 Min / max part thickness mm 8 - 60 Thickness of glued wooden edge mm 0.4 - 6 (8mm HP composition) Thickness of glued roll edge mm 0.4 - 3 Maximum area of ​​glued roll edge mm² 135 Diameter of reel support "plate" mm 780 Maximum overlap of glued edge, relative to the part mm 2+2 Minimum distance between transported parts mm 600 Minimum length of part (when the width of the part is min. 100 mm) mm 140 Minimum length of roll edge mm 180 Minimum length of wooden edge mm 220 Minimum width of the part (when the length of the part is min. 210 mm) mm 95 (60mm opc.) Width of the extension support mm 560 Height of the worktable from the floor mm 900 Plate milling unit "RT-V" Max. chip removal area mm2 55 Max. milling thickness mm 3 Min. / max. thickness of the part mm 8 - 45 (60mm opc. Motor power kW 2 x 1.5 Nkedpfxew Sw Tko Ah Rsw Mill diameter mm 100 Mill height mm 49 (64mm opc.) Tool rotation speed rpm 9000

Condition: used, machine/vehicle number: 007350, X axis working area: 4000 mm Y axis working area: 1400 mm Working Table: Pod and Rail Main Electrospindle power: 15 KW Number of controlled axes: 4 axes Total number of drilling spindles: 30 Total number of tool changer positions: 28 Nedjwcyd Ispfx Ah Rjkw

Condition: used, Year of construction: 1996, Max. punching force: 55 tons Notching: 10 mm Hole diameter and thickness: 40x10 mm Flat steel: 300x15 or 200x20 mm 90° angle steel: 120x120x10 mm 45° angle steel: 70x70x7 mm Bar steel: 40 mm Nodpfx Ahswgkq Tj Rskw Square steel: 40 mm Strokes per minute with a 20 mm stroke: 37 /min Throat: 250 mm Machine weight: approx. 1,800 kg

Condition: used, machine/vehicle number: 007517, Type of edging: Thin edge, Thick edge, Solid wood Gluing System: EVA Hotmelt, Hot Air Premilling Unit: yes Corner Rounding Unit: yes Nksdpfxowuz E Re Ah Rsw Grooving Unit: yes Max feed speed: 18 m/min Maximum panel thickness: 60 mm Operating Units: 9 nr

Condition: like new (used), functionality: fully functional, Panel Dividing System SCHEER FM 16 – DNC 3100 x 3100 As New – Machine No. 33542 The SCHEER FM 16 is a high-performance, electronically controlled panel dividing saw featuring advanced drive technology and an intuitive control interface. The machine has been fully overhauled and newly painted – its condition is virtually as new. Ideal for precise, automated cutting of wood-based panels in continuous industrial operation. Main Technical Data: • Cutting length: 3100 mm • Cutting depth / Blade projection: 80 mm • Saw motor: 7.0 kW • Scoring motor: 1.1 kW (can be switched off) • Feed speed: 2 – 40 m/min (steplessly adjustable) • Return: Rapid traverse, automatic lowering • Operator interface: SCHEERWIN, graphical, document-oriented (64-bit) on Windows 10 • Drive system: Küenle frequency inverter with Stöber synchronous servo drives incl. absolute encoder – for highest positioning accuracy and dynamic control Features & Highlights: • FM 16-3100 longitudinal cutting saw with hardened guides and automatic forward/reverse travel • HP 5021 material feed table with 6 clamping carriages, servo drive & measuring resolution of 0.05 mm • WP angular pressure system, 2400 mm adjustment range, fully automatic • SP 5000 remnant cutting device for offcuts down to min. 5 mm • HP 5024 miter fence table (1800 x 800 mm), steel angle with Pertinax overlay • HP 5025 workpiece support table (1800 x 800 mm), also with Pertinax overlay • Air cushion system in the front tables, including radial fan Saw blades included: Nksdpfxjunwk To Ah Rsw • KSB 4005 for main saw (ø 305 mm, Z = 60) • KSB 4006 for scorer (ø 200 mm) Condition & Service: • Condition: Overhauled & as new • Functionality: Fully operational • Warranty: 12 months Reliability in Continuous Operation: This machine is in use worldwide – even under extreme conditions. Whether in the dry climates of Africa or the humid environments of Southeast Asia (e.g., Thailand), the SCHEER FM 16 operates reliably in 3-shift systems – 365 days a year – and stands out for its superior precision, stability, and durability. Warranty: We are so confident in the quality and robustness of our machines that we offer a 7-year warranty on the machine frame and guideways. (Excludes electrical supplier components and wear parts.) Flexibility & Customization: We offer various models and equipment options – to fit every budget. We also realize custom tailored solutions based on your individual requirements. 📞 Contact us for an individual offer or to arrange a viewing appointment. Machine available from stock. Delivery, commissioning and training optionally available.

Condition: new, Year of construction: 2023, functionality: fully functional, machine/vehicle number: 10006565, Weinig Powermat 1500 Working width 30 - 310mm (with tool flight circle 93-125mm) Working height 100 - 200mm (with tool flight circle 93-125m) Number of spindles 6 Spindles bottom 2 Spindles right 1 Spindles left 1 Spindles top 2 Spindle arrangement u-r-l-o-o-u Spindle speed max 8,000 rpm Njdpfx Ahorq Ebfs Rjkw Spindle diameter 40 mm Powerlock tool holder incl. chamfering unit Separate motor for each spindle Electronic feed incl. brake, infinitely variable 5-40 m/min. Durofer pointed tooth rollers Short infeed table 1.2 m long with 2 driven rollers above the table Hard-coated machine table surface Manual lubricant pump WEINIG Comfort Set Control system WEINIG MEMORY PLUS-SYSTEM CE mark Declaration of Conformity

Condition: good (used), Year of construction: 2012, functionality: fully functional, CNC machining center with edge banding for shaped workpieces Working dimensions for Y1 axis: X axis: 4,300 mm X axis pendulum operation: 1,620 mm Y axis: 1,320 mm Working dimensions for Y2 axis (edge processing): X axis: 3,300 mm X axis pendulum operation: 600 mm Y axis: 1,240 mm Work table: 8 ATS workpiece supports with 3 vacuum cups each 8 rear workpiece stops, program-controlled lowering, each mounted in one support 8 workpiece stops, 670 mm from rear, each mounted in one support 2 + 2 lateral workpiece stops 4 removable center stops 6 lift rails, pneumatically program-controlled lowering, for positioning heavy workpieces Automatic positioning of workpiece supports and vacuum cups via EPS (Electronic Positioning System) Automatic central lubrication Vacuum system divided into 2 separate work zones along the X axis Vacuum assist system for clamping templates Chip conveyor integrated into the machine table Vacuum pump 90 cbm/h Processing head equipment: Mounted on Z2 axis Drilling head BH 26 2L with: 16 vertical drilling spindles, individually selectable 2+2 horizontal drilling spindles in X direction 2+2 horizontal drilling spindles in Y direction Grooving saw, diameter 120 mm, fixed in X direction Grooving saw, diameter 120 mm, fixed in Y direction Milling spindle 13.2 kW (11 kW in S1 operation), HSK 63 F Mounted on Z1 axis Speed range 1,000 – 24,000 rpm Clockwise and counter-clockwise rotation C axis 360 degrees for adapter units Cleaning nozzle for cleaning the milled edge before the edge banding process Tool magazine for 16 tools Edge banding unit for workpieces up to 60 mm thickness Edge banding unit CNC controlled, with 360 degree endless rotation Glue application for hotmelt adhesive Double pressure roller, interchangeable and can be switched off Heating lamp for preheating edge band material End trim unit to cut the edge band material at an 8-degree angle to the workpiece edge using circular saw blade Technical data: Plastic edge thickness 0.4 – 3 mm (*) Solid wood edge thickness 0.4 – 2 mm (*) (Best results achieved using wood edges with primer from 0.4 – 1.2 mm) Max. edge height 64 mm Panel thickness min. 14 mm, max. 60 mm Min. inside radius 18 mm for edge thickness less than 1 mm Min. inside radius 30 mm for edge thickness 2 mm Min. panel size for edge banding: 300 x 300 mm Min. size for edge banding of internal cutouts: 350 mm, with plastic edge max. 1 mm thickness and max. panel thickness 18 mm Edge magazine for 2 rolls, positioned outside the machine—this solution limits pendulum processing. Roll diameter for edge material: 800 mm Safety equipment: * Safety mats in front of the machine * Safety fence on the right with access door Without tools Control system: PC control with BIESSE WORKS ADVANCED Restart after emergency stop BIESSE WORKS office version Nodpexraimsfx Ah Rekw Units: - Flush/radius trimming unit - Combination profile/flat scraper unit - Sawing unit

Condition: good (used), Year of construction: 2014, functionality: fully functional, System consisting of: PANEL SAW SELCO WNT 610 / 4500 x 2200 mm PC-BASED CONTROL SYSTEM Max. cutting length: 4,500 mm Max. saw blade projection (main saw): 95 mm Max. opening of clamping grippers: 90 mm Min. panel dimensions from rear: 1,830 x 915 mm Max. panel dimensions from rear: 3,100 x 2,200 mm Min. panel thickness for rear feeding: 3 mm Worktable height: 985 mm Main saw motor: 15 kW Main saw blade diameter: 380 mm Scoring saw motor: 2.2 kW Scoring saw blade diameter: 200 mm DIGISET: electronic adjustment of scoring saw to main saw QUICK CHANGE: fast blade change at the push of a button Saw carriage drive: 1 - 140 m/min Integrated side aligner in saw carriage: 0 - 4,200 mm Automatic measuring system for manual cuts Pusher extension from 5,500 to 7,800 mm 10 pneumatic clamping grippers on pusher with double fingers 3 front aligners 16 support roller tracks behind the machine table 4 air-cushion tables in front of the machine table, rounded, including movement device for table 2 Automatic ejection of end pieces beyond the cutting line Material support area under the pusher equipped with brush rollers for sensitive surfaces Machine table with air nozzles for sensitive surfaces Automatic device for monitoring the main saw blade consisting of a sensor that detects blade deflection and a system for measuring main spindle speed Nkjdpfxjxranpe Ah Rew Software package: QUICKOPTI for optimizing cutting plans directly on the machine OSI PLUS INTERFACE VERSION OPTIPLANNING OPTIMIZATION SOFTWARE incl. hardware dongle, allows management of up to 10 users via network OS LABELLING: graphical editor on the machine control system with workpiece drawings, real-time label printing directly at the machine possible COMMUNICATION BETWEEN STORAGE FEED SYSTEM AND SELCO Industrial label printer at the machine STORAGE FEED SYSTEM RBO WINSTORE 2D STANDARD TRAVERSE 8000 MM Swiveling suction frame 0 - 180 degrees with controlled axis Panel alignment/squareness correction system consisting of 3 photocells mounted on pneumatic cylinders Panel weight detection via load cell mounted on the suction frame in the separation area, checks whether the specified weight value is within the expected range for this panel type. If not, the panel is set down again and the separation cycle restarts. Roller conveyor for stacking and unstacking: 4,200 mm Software: LINE SUPERVISOR with warehouse mapping, catalog, import of machining data from the optimizer, management of BOMs, plant control

Condition: not inspected (used), Year of construction: 1991, Torwegge multirip saw Chain width 250mm Njdpfx Asucnuksh Rekw cutting height 100mm Total connection 39kW