Veneer press

JOOS

Condition: used, Year of construction: 1983, Max. press length: 2500 mm Max. press width: 1250 mm Total pressing force: 80 t Specific pressing force: 2.5 kg/cm² Fpjdpfx Adszkl Tbjrek Press opening width: 400 mm Heating plate material: standard aluminum Operation: button control Swivel button: Yes Number of pressure pistons: 4 Safety edge strip: Yes Condition of heating plate: good Weight: 3800 kg Dimensions: 2850 x 1410 x 2000 mm Storage location: Nattheim

Condition: refurbished (used), functionality: fully functional, Refurbished, six-piston hydraulic flatbed press of Italian manufacture. Branded veneer press for easy wood veneering, with warranty and service. Veneer sheet dimensions: 3000 x 1300 mm Pressure at full surface: 2.5 kg/cm2 Total maximum pressure: 90 tons Number of hydraulic pistons: 6 MYLAR Teflon film on the plates Prepared for water-based plate heating Option to install a hot water boiler Price includes complete machine refurbishment Price: 12,000 EUR (excluding VAT) Fpodpfovvbbcjx Adrjk The machine is refurbished, adjusted, and tested. The condition of the refurbishment and the machine's readiness for delivery must be verified in advance! In stock: Telnice near Brno, Czech Republic Testing, demonstration of the machine, and operator training are standard.

Condition: used, Year of construction: 2008, total length: 2,800 mm, total width: 800 mm, total height: 1,600 mm, Colour: Grey Empty weight: 500 kg - Year: 2008 - Documentation available: No - CE marking present: Yes - CE certificate present: No - Serial number: 1917295 - Min. working width [mm]: 400 - Max. working width [mm]: 1600 - Max. passage height [mm]: 100 - Voltage [V]: 400 - Current consumption [A]: 16 - Fuse [A]: 20 - Power [kW]: 5.2 - Transport dimensions: 2800mm x 800mm x 1600mm (l x w x h) Fpsdpfx Adozrtcaerek - Transport weight [kg]: 500kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: refurbished (used), Year of construction: 1983, machine/vehicle number: 11549, functionality: fully functional, power: 12.8 kW (17.40 HP), input voltage: 400 V, type of input current: three-phase, pressing force: 120 t, table width: 800 mm, table length: 1,600 mm, total length: 2,300 mm, total width: 1,000 mm, year of last overhaul: 2024, Press 1600x800 mm – 120 T Press force: 120 T Dimensions: 1600x800 mm Vertical opening (daylight): 1040 mm Machine number 11549 Year of manufacture 1983 Busse electric heating plates (2024) Fpsdpoztxliefx Adrjk - 12.8 kW electric - Maximum temperature: 180 °C Inspected by DV Hydraulics in 2024

Condition: new, Year of construction: 2024, New machine Year of manufacture: 2024 MACHINE SEEKER ENQUIRIES: Please understand that we do not offer this new machine outside our sales area in Germany (Rhine-Main area and North Rhine-Westphalia). These inquiries will not be answered. MACHINESEEKER ENQUIRIES: Please understand that we do not offer this new machine outside our sales area in Germany (Rhine-Main area and North Rhine-Westphalia). These inquiries will not be answered. Fsdpfx Asw Naanedrjpk Equipment and technical specifications: The Master brings grinding to the point. It embodies the essence of our 75 years of experience in grinding technology. This means that it combines all the features essential for the fast, reliable production of perfect surfaces right out of the box. Nothing more, nothing less. The core model, the Kündig Master, is equipped with a calibration roller and a sanding pad unit and features a proven design that guarantees decades of high sanding precision – and all this across the generous working width of 1350 mm. A control unit is also on board, which quickly and easily achieves the desired result. The Sanding Units – Proven Combination The sanding units rely on the proven combination of calibration roller and sanding pad. For secure workpiece guidance, a parallel spring-loaded steel pressure roller is located at the machine inlet, and rubber pressure rollers are located between the sanding units. Calibration Unit (R): The calibration unit is a grooved rubber contact roller of proven hardness. It is ideally suited for calibration tasks, even with high chip removal rates if necessary. The level of the contact roller is continuously adjustable to compensate for the thickness of the abrasive grain. Segmented sanding pad (E): With the E-Plus configuration, the fine sanding unit features a segmented, electronically controlled sanding pad with a scanning width of 35 mm instead of the pneumatic version. This allows for even more precise fine sanding in the edge area of the workpieces. The edge pressure of the sanding segments is automatically controlled, but can also be precisely adjusted on the touchscreen to more precisely influence the sanding around the workpiece edges. Changing the graphite sliding coating is also quick and easy. The features - In a nutshell Construction: In terms of robustness and durability, the Master is in no way inferior to our other model series. It features the same solid construction that makes all our machines a forward-looking investment and is designed to deliver precise sanding results even after many years. Top adjustment: For over three decades, we have equipped our machines exclusively with top adjustment. Why? While more complex in design than table adjustment, it is also superior in many respects. The machine can handle heavier workpieces, maintains its precision more reliably, and offers the advantage of a constant working height. Workpiece dimensions: The upper section, i.e., the through-hole, is motorized and can be finely adjusted via a touchscreen. The maximum through-hole height is 160 mm. With a working width of 1350 mm, the Kündig Master offers a generous, tried-and-tested standard size.

Condition: used, total length: 3,950 mm, total width: 1,500 mm, total height: 2,150 mm, Colour: Green Empty weight: 4.000 kg - Documentation available: No - CE certificate present: No - Serial number: 19198 - Main motor power [kW]: 1.1 - Press drive: Hydraulic - Max. workpiece length [mm]: 3100 - Max. workpiece width [mm]: 1300 - Max. workpiece height [mm]: 390 - Total stroke [mm]: 390 - Number of work zones [pcs]: 3 - Number of levels [pcs]: 3 - Plate material: Wood - Number of cylinders [pcs]: 6 - Cylinder diameter [mm]: 80 - Total pressure [Ton]: 160 - Options: Disable partial cylinders - Voltage [V]: 400 - Fuse [A]: 16 Fpjdpsy Rq Efefx Adrek - Power [kW]: 1.1 - Transport dimensions: 3950mm x 1500mm x 2150mm (l x w x h) - Transport weight [kg]: 4000kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: excellent (used), Year of construction: 2013, Vacuum press, vacuum table, vacuum table from Joos with silicone membrane Universally applicable press, veneer press for veneering, coating, shaping, form veneering, edge banding, etc. With some limitations, you can certainly do without a hydraulic veneer press with this press. New heat-resistant silicone membrane, extremely flexible and easy to clean. Also suitable for shaping preheated thermoplastic materials such as acrylic glass or solid surface materials. Frame inner dimensions approx. 2900 x 1410mm, usable area approx. 2800 x 1300mm Fjdpoy Hl Hpsfx Adrspk Working height approx. 900mm Vacuum pump Becker VT4.40, 400V, 1.5 kW with a capacity of 40 m³/h and two vacuum tanks of 200 liters each, ensuring comfortable operation and rapid evacuation. Electronic vacuum pressure switch, which switches off the pump when the target negative pressure is reached, preventing continuous operation. Movable on four swivel casters, lockable. Frame can be easily folded up and is locked with two bolts. Double frame for quick replacement of the membrane. A new silicone membrane is currently installed. Rapid distribution of the vacuum through a grooved base plate. CE marking Original paint, some areas have been retouched. The silicone membrane and the base plate have been renewed; the machine is ready for immediate use. Dimensions approx. 3100 x 1550 x 1020mm (LxWxH). Weight approx. 550kg. The machine can be demonstrated on site by appointment. We only offer machines that are available in our warehouse and ready for demonstration, see "other offers from this provider".

Condition: excellent (used), Year of construction: 2022, IES screw compressed air units supply a continuous, reliable flow of compressed air directly to the point of use without requiring a dedicated room. The ECB – SCB range, made according to high quality standards, uses components by leading companies on the market, ensuring reliability and traceability. 7.5 KW 8 Bar 1000 lts/min Fpjdpfxsxaxr Ne Adrok Very low running hours - 1351 run hours Complete with three filter set

Condition: used, Year of construction: 1972, Second-hand machine Year of manufacture: 1972 Features and technical specifications: - Pressing surface 2500 x 1100 mm - Total pressing force: 650 kN - Opening width: 400 mm - Number/diameter of cylinders: 4/80 mm - Operating pressure: 325 bar - Closing time: approx. 16 sec. Fpodpfx Adezk N U Nsrjk - Panel type: aluminium / natural - Thickness: approx. 51 mm - Power rating per heating plate: approx. 6.8 kW - Heating-up time to 90°C: approx. 16 mins. - Dimensions: 2900 x 1300 x 2050 mm - Weight: approx. 2,900 kg Availability: at short notice Storage location: 63934 Röllbach

Condition: used, Second-hand machine Features and technical specifications: - Pressing area: 2,200 × 1,100 mm Fpjdszk Nyxspfx Adrjk - Number of cylinders: 4 - Max. pressing force: 60 tonnes - Configuration: 1 stage - Heating plates: gold-anodised ELKOM energy-saving plates - Opening width: 350 mm - Rated power: 14 kW - Piston diameter: 80 mm - Operating pressure: 365 atü Dimensions: 2,600 m × 1,250 m × 1,750 mm Availability: at short notice Location: Röllbach

Year of construction: 2006, condition: good (used), FIN Glue spreader SC2R/1300 with 2 rollers The year 2006 manufacture: FIN s.r.l. Italy main technical specification: Width of working: 1300mm The maximum passage between roller: 120mm The diameter of rollers: 185mm Advancement speed: 19m/min Net weight 390 Kg Overall dimensions: 64 x 210 x 136cm Overall dimensions with case: 73 x 200 x 153cm 400 V, 50 Hz, 037 kW Accurate and uniform spreading with any type of glue, excellent technical characteristics, added to the high practicalness, functionality and safety for the operator, place it at the forefront among the 2 roller glue spreaders. Spreading roller covered in antiacid rubber, ground and furrowed, hard wearing, as they are built with a rational layer of rubber it is, therefore, possible to carry out 6-7 grindings. It is easy and quick to disassemble. Spreading, precise and uniform on one or both sides of the panels. Special shock-absorbers, on the roller supports, allow the rollers an automatic opening depth, so as to spread panels of different thickness within 5 mm. they also compensate for eventual parallelism differences of the panel. Uniform glue dosing by a rectified distribution tank, in sheet-iron, with very quick extraction to allow cleaning. Collecting tank, for glue and washing water, in galvanized sheet-iron, extractable for easy cleaning. Safety protections, in sheet metal on the rollers and glue distribution tank, a sheet metal protection prevents the introduction between the rollers of any object more than 5 mm. thick over the transit established, ensuring the maximum safety for the operator. Electrical installation, in a waterproof case with fuses, thermal switch for motor and transformer protection. Control panel, with starting button, stopping button and warning light (24 V). Fodpfxjfgunto Adropk Rollers rotation chain with self-registrable turnbuckle pinion. Roller washing with a bored washing tube, for the water intake during this operation.

Condition: excellent (used), Year of construction: 2008, For sale: Hydraulic through-feed press JOOS DLP 240/OK Machine type: Hydraulic through-feed press with automatic feeding and unloading of elements. Application: Designed for coating flat panel materials of uniform thickness using coating material under elevated temperature. Basic data: Manufacturer: JOOS Model: DLP 240/OK Year of manufacture: 2008 Operating voltage: 400 V / 50 Hz Power consumption: 55.5 kW Hydraulic cylinders: 8 × 125 mm + 2 × 40 mm Operating pressure: 245 bar Fedpfsyc Eukex Adrjpk Pressing surface: 4200 × 1400 mm (L × W) Total pressing force: 2400 kN Condition: very good Documentation: complete Important note: The machine does NOT have a control program. TAG: hydraulic press, through-feed press, industrial press, coating press, panel processing machine, production line equipment, industrial machinery, JOOS, Siempelkamp, Orma, Italpresse, Dieffenbacher, Bürkle, Langzauner

Condition: used, Year of construction: 1979, Pressing area: 2200 mm x 1100 mm Opening: 360 mm Heating: electric Plate surface: aluminium Emergency stop: no Fpsdpfx Adey A Hkborek Pressing force: 65 t Number of cylinders: 4 Power consumption: 21 A Machine length: 2500 mm Machine width: 1300 mm Weight: 2600 kg

Condition: used, Technical data paper roll cutting machine. This machine can only be used for small residual rolls up to a maximum diameter of 400 mm in order to automatically unwind these residual rolls and cut the paper into strips so that it can be better pressed into bales. Manufacturer unknown Type unknown Year of manufacture unknown Dimensions feed table for rolls: Width inside of rolls 2.195 mm Height inside of castors 465 mm Fedpfxou Tg Sps Adrjpk Transport dimensions Feed table over all: 2,650 x 1,300 x 2,150 mm (W x H x D) Dimensions roller cutter: Width cutting shaft inside 2.250 mm Transport dimensions of the roll slitter over all: 3,050 x 1,550 x 550 mm (W x H x D) Remarks: There are no further data or documents available. A viewing is possible by appointment. We assume no liability for the technical data and possible errors.

Condition: used, Year of construction: 1989, Pressing area: 2500 mm x 1100 mm Opening: 400 mm Fsdpfeyl Tinjx Adrjpk Heating: electric Plate surface: Aluminium, gold anodized Emergency stop: yes Pressing force: 65 t Number of cylinders: 4 Current consumption: 22 A Machine length: 3000 mm Machine width: 1300 mm Weight: 3000 kg