Sliding table saw

Martin T 73 BASIC

Condition: new, Year of construction: 2022, New machine Year of manufacture: 2022 Standard Equipment: - Electrically powered height and tilt adjustment (0–46°) with automatic correction of cutting height during tilting - Eye-level, swiveling control panel - Double roller carriage, carriage length 3,000 mm - Manually adjustable rip fence with scale, including manual fine adjustment, max cutting width 1,000 mm - Crosscut fence with fixed 90° position, manually adjustable via scale up to 3,200 mm - Max saw blade projection: 150 mm - Max saw blade diameter: 450 mm - Drive power: 4 kW (5.5 HP) at 4,000 rpm - AKE main saw blade clamping system - Working height: 91 cm Motor 5.5 kW (7.5 HP) with VARIO F45: - Stepless speed control from 2,000–6,000 rpm - Precise speed adjustment to the material increases cutting quality and blade service life Extended Cutting Height for Single-Side Tilting: - This option enables single-side tilting with a large extraction hood for max blade Ø 550 mm and a blade projection of up to 204 mm - In combination with a scoring unit: max blade Ø 500 mm / max cutting height 179 mm - Only available in conjunction with at least 5.5 kW (7.5 HP) drive power 2-axis Scoring Unit for Tilting: - With motorized height and lateral adjustment, programmable scoring blade height with quick lowering and raising - Drive motor 0.75 kW (1 HP), 8,200 rpm - Retrofitting only possible on machines prepared for the scoring unit LED Lighting: Csdpfjw I Uxcjx Agfsra - Highly energy-efficient LED technology for clear marking of the scoring area The Altendorf double roller carriage is renowned for its smooth operation and precision run. It can be locked steplessly in any position. The large double rollers, precision-manufactured from hardened steel, ensure the upper carriage remains absolutely accurate in conjunction with the lower carriage on the hard-chromed guide bars. This running quality is maintained even after decades of heavy use and exposure to dirt. The carriage construction features a highly rigid, torsion-resistant multi-chamber design. The table surface is finely planed and anodized. A hard-chromed round bar in the upper carriage serves as both the mount for the cross-slide and the interface for various accessories. The entire unit is low-maintenance and does not require lubrication. On/Off Switch on Double Roller Carriage: - The on/off switch on the double roller carriage is always within easy reach. With four buttons, both the main saw blade and the scorer can be switched on and off, saving time and increasing safety. Angle/Mitre Fence, Crosscutting up to 3,500 mm: - This Altendorf-patented fence with integrated length compensation makes it easier to cut angles and mitres precisely in a single operation. In both positions, the swivel angle is steplessly adjustable by up to 49° and displayed on a scale. The play-free and robust stop flaps can easily be moved and adjusted as a single flap over the entire area up to max. 3,500 mm.

Condition: used, Year of construction: 1992, Max. cutting width: 5300 mm Max. cutting height: 2200 mm Saw blade diameter: 300 mm Max. processing thickness: 80 mm Saw blade bore: 30 mm Bottom support: Fixed rollers Saw head pivoting: Manual Saw feed: Automatic Extraction: External extraction Approx. weight: 1500 kg Motor power: 5.5 kW Storage location: Nattheim Crjdpfx Agjvvkq Tofja

Condition: used, Year of construction: 1989, Used machine Year of manufacture: 1989 Condition: Function tested Equipment and technical data: Max. edge thickness: 20 mm Crodjw I U E Aopfx Agfsa Max. edge height: 51 mm Max. thickness of coil material: 3 mm Min. workpiece length: 140 mm Min. workpiece width: 60 mm Glue system: 1906 cartridge Pressure unit Milling unit 1920 for flush milling up to 20 mm and chamfer milling Required space (LxWxH): 3150x1800x1375 mm Weight approx.: 800 kg Location: Flörsheim Availability: Short-term

Condition: new, The ALTENDORF F 25 offers everything in a small space, what a sliding table saw must be able to do. Whether in the first own workshop, for daily use, in industrial production industrial production or as a powerful second machine. - The F 25 is the space-saving all-rounder that simply makes you simply makes you more productive. Materials such as wood panel materials, solid wood, wood-like materials or extruded or extruded profiles can be cut with the best precision, easy handling and outstanding cutting quality can be easily processed. The one-sided swivel Crsdpfx Aeu R S Hcjgfea saw blade also enables angled cuts. The smooth-running double roller carriage based on the Altendorf as well as the digital display of the height and tilt are standard features. A machine for beginners and professionals alike. Double roller carriage, tiltable, man. Height and swivel adjustment, Rip fence with man. Fine adjustment, angle mitre fence, Preparation for retrofitting, of a scoring unit ----- Technical data ----- Swivel range: 0 - 46 °, carriage length: 3,200 mm, Cutting width: 1,000 mm, Cutting height: 100 mm, max. saw blade Ø: 315 mm, max. saw blade projection: 104 mm, Non CE version: max. saw blade Ø: 350 mm, max. saw blade projection: 121.5 mm, Crosscut fence extendable up to: 3,450 mm, speeds: 4,200 rpm, Motor power: 4.4 kW, 5.5 HP, work table height: 880 mm - large extraction hood is optional - - new exhibition machine -

Condition: used, functionality: fully functional, F 90 panel saw, non-tilting, table extension, table length approx. 3000 mm top extraction, sliding carriage length 3000 mm, scorer, 1000 mm to the right of the blade, saw blade diameter 400 mm, max. cutting height 130 mm Crsdpfoyaq Ahjx Agfja weight 900 kg Price ex-works Transport available at extra cost!

Condition: good (used), Year of construction: 1962, large band saw with 1250 mm roller diameter with center cutting device 45 kw motor roller width 120 mm with electr. saw blade tensioning the upper wheel has been removed for transport very good condition because little run was overhauled in 1997 Crsdpfxofnh T Ie Agfoa

Condition: excellent (used), Altendorf F45 Panel Saw Sliding table length: 3200 mm Cutting width to the right: 1300 mm Scoring unit Max cutting height: 120 mm Electric adjustment of saw blade tilt up to 45° Electric lifting and lowering of the worktable Main motor power: 5.5 kW Scoring motor: 0.75 kW Saw blade speed variable via belt: 3000/4000/5000 rpm Max saw blade diameter: 400 mm CE certificate Crsdpfexc Et Sox Agfja

Condition: used, Year of construction: 1999, Carriage length: 3800 mm Cutting width at the width stop: 1500 mm Cutting width at the cross-cut fence: 3200 mm Cutting depth: 140 mm Scoring unit: no Saw blade height adjustment: electric Swivel adjustment saw blade: electric Width stop adjustment: electric / position control Saw blade angle display: digital Cutting height display: - Crjdpfxovxi Dde Agfea Width stop display: Digital Cutting ruler display: Scale Saw blade diameter: 400mm Speeds: 3 Motor power: 7,5kW Motor brake: Yes, automatic Suction connection: 80mm and 120mm Machine length: 3900mm Machine width: 2200mm weight: 1000kg

Condition: excellent (used), Year of construction: 1994, Panel saw F 90 with 3 m sliding table Cutting width: 1050 mm Max. saw blade diameter: 450 mm Motor power: 5.5 kW – 3 speeds Cedpox Nrxkefx Agfsra Height adjustment: via handwheel Digital display for speed indication Cross table Extraction hood Location: ex customer site - immediately available -

Condition: new, weight max. in kg 1000 kg arm length 4000 mm height 3000 Unterkante Ausleger total column height 3790 mm swivelling range 270 Grad Total weight, approx. 525 kg Description: - Trolley power supply - Trailing cable, cable slack approx. 800 mm - Operation from the hallway using a pendant control including: - ABUS electric chain hoist - Chain hoist type GM 4 1000.5-2, 2-leg - painted in color RAL 5017 traffic blue - Load capacity 1 t - hook path 3000 mm - highest hook position 2442 mm - Calculation basis FEM 9.901 - Drive group 2m / M5 - Lifting, 2-stage (pole switchable) 1.3 / 5 m / min - Lifting capacity 0.22 / 0.9 kW - duty cycle 60% ED - Circuits 360 c / h Overload protection The crane system complies with the requirements of the Machinery Directive 2006/ 42 / EC as well as the currently valid UV regulations DGUV regulation 52 Crodpfx Agexak Hxsfea (formerly BGV D6). included : - Anchor rods L200 (set) size LS 200 - Consists of 8 pieces M27 mm x 800 mm with 1 steel template (500/8) - for fixing the foundation, including accessories for grouting There is an assembly gap between the column base to align the slewing crane and building floor to be provided. The assembly gap is after approx. 4 weeks Crane operation to be poured under by the customer. Fig. Shows a similar crane system