2002 MEBER SAR600

MEBER SAR600

Condition: new, ELMAG STBS-500 masonry band saw STBS for dry cutting (bricks, aerated concrete, insulating material) The STBS series masonry band saws are specially designed for use Kjdpfot Egfzsx Adwjwt designed for use on construction sites. In dry cutting, they are suitable for the precise processing of materials such as aerated concrete, bricks, lightweight poroton, expanded clay and wood, but also for insulation boards such as Styrofoam and Styrodur. ADVANTAGES Connection piece for dust extraction available Saw blade tension easily and optimally adjustable with handwheel Includes forklift pockets and lifting eye Constant saw blade tension and 440 mm running wheels for reduced risk of blade breakage and precise cuts Direct drive with geared motor on extra motor console Automatic saw blade switch-off at the end of the cut Machine stops when the doors are opened Short saw blade change times Straight, miter and manual contour cuts possible Precise band guide, adjustable to the block height Easy relocation thanks to transport wheels and transport bar TECHNICAL DATA Cutting height 500 mm Cutting length 660 mm Angle 0 - 45 ° Saw blade dimensions 3850x27 mm Table size 710x1060 mm Rated power 1.85 kW Mains connection 230/50 V/Hz Dimensions 1050x900x1840 mm Weight 203 kg

Condition: used, Wheel diameter: 500 mm Storage location: Nattheim Kedpfx Adswl D S Uewowt

Condition: reconditioned (used), reinforced gray cast iron table, tiltable balanced cast iron wheels precise upper & lower blade guide Work table dimensions approx. 680 x 580 mm Cast iron wheel diameter 600 mm Max. cutting height 340 mm Max. cutting width approx. 540 mm Kedpjv Dg A Uofx Adwewt Three-phase motor approx. 2.2 kW, 50 Hz, 400 V

Condition: used, roll diameter 400 mm throat 385 mm Kodpfx Adjxab A Rswjwt workpiece height max. 335 mm cutting speed 25 - 150 m/min table surface area 595 x 595 mm saw band length 3400 x 6-16 x 0.9 mm work height max. 1020 mm voltage 400 V total power requirement 1.5 kW weight of the machine ca. 470 kg dimensions of the machine ca. 950 x 850 x 1920 mm good / well-maintained condition (!!) Equipment: - electro-motoric / robust, vertical band saw machine - continuously adjustable saw blade speed * Adjustment range via handwheel .. 25 - 150 m/min. - continuously adjustable height of the blade guide - continuously adjustable saw blade width - solid work table - machine base frame - control cabinet with main switch

Condition: good (used), Code: 0230 Brand: MAKITA Model: 5603R - CE Standard Circular saw with case for cutting wood, plastic, aluminum, and various materials - CE Standard Kodoxn Stcspfx Adwowt Technical data: Blade diameter mm 165 Motor 1100 W single-phase Rpm 5000 Max cutting depth at 90° mm 54 Max cutting depth at 45° mm 38 Weight kg 4,9 Transport not included

Condition: new, feed pressure 8 bar Effective free air delivery 250/350 L/min Receiver capacity 100l / 10bar l / bar Kedpfeu Imd Dsx Adwjwt weight of the machine ca. 67 kg. Number of cylinders 2 Stk. motor 230V / 2,2KW V / KW range L-W-H 940 x 430 x 950 mm

Condition: used, Year of construction: 2021, Used machine Year of manufacture: 2021 Condition: As new, machine is unused Features and technical specifications: - Saw band speed: 850 / 430 m/min - Flywheel diameter: 530 mm - Saw band length: 3,865 mm (min. 3,840 mm / max. 3,872 mm) - Saw band guides: precision guides above and below - Max. cutting height at 90°: 270 mm - Max. cutting width with fence: 474 mm - Max. cutting width without fence: 514 mm - Worktable length: 535 mm (max. 685 mm) - Worktable width: 535 mm - Worktable height: 945 mm - Worktable extension length: 535 mm - Worktable extension width: 150 mm - Worktable tilt: -10° to +45° Note: From 20° tilt, for safety reasons a clamping device or fence is required to prevent the workpiece from slipping. - Extraction port diameter: 2 × 120 mm - Output: 2.25 kW - Connection voltage: 400 V - Mains frequency: 50 Hz Scope of delivery: - Mitre fence ±60° Ksdow E Tzlspfx Adwjwt - Laser device for cutting line marking - Saw blade set: 1 × Saw band 3865 x 10 x 0.5 mm, 4 TPI 1 × Saw band 3865 x 20 x 0.5 mm, 4 TPI 1 × Saw band 3865 x 25 x 0.5 mm, 4 TPI Dimensions: 1,020 × 850 × 1,982 mm Weight: 163 kg Availability: short-term Location: Saxony-Anhalt

Condition: used, Year of construction: 1990, No. 04502 Veneer press Ott JU 2511/70 Used, year of construction 1990 Electro-hydraulic, approx. 15 kW Aluminum heating plates 2550 x 1100 mm LW Heating electric 4 hydraulic cylinders each 80 mm diameter Total pressing pressure 70 tons Specific pressing pressure 2.5 - 3.5 kg/cm2 Opening width 400 mm Button control for opening - closing - stop Pressure monitoring with automatic readjustment Adjustable limit switch for specific opening width HAWE pump Safety rip cord Incl. electric cable and plug 32 A Incl. electric plans, operating instructions as .pdf file Transport dimensions approx. 2900 x 1400 x 2000 mm LWH Weight approx. 3000 kg To avoid possible misunderstandings, an on-site inspection is possible and recommended by appointment Sold as is Technical specifications, condition description, year of construction and scope of delivery according to manufacturer's brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “sold as seen” Terms of payment: Prices plus VAT, payment before collection or dispatch Terms of delivery: ex warehouse Kwsdpfx Adjxwp S Iswjt

Condition: good (used), Code: 0245 Brand: FRAMAR Model: 500 Band saw for cutting wood, plastic and various materials Technical data: Flywheel diameter 480 mm Max cutting height 250 mm Three-phase motor Hp 2 v.380/50 Table dimensions 570 x 520 mm Foot brake Tilting table Kwjdpsxzd Hzefx Adwst Suction port diameter 100 mm Overall dimensions mm 600 x 930 x 1870 h Weight 250 kg

Condition: new, Year of construction: 2025, New machine Year of manufacture: 2025 TECHNICAL DATA Wheel diameter 500 mm Belt speed 1300 m/min Cutting height 330 mm Cutting width 480 mm Blade length max. 4140 mm Saw blade width min. / max. 15 mm / 25 mm Optional with special covering saw blade width min. / max. 6 mm / 20 mm Table size 670 x 495 mm Table height 900 mm Extraction nozzle 2 x Ø 100 mm Motor power 1.5 kW / 2 HP Special voltage: 400 V / 50 Hz Color RAL 7035 light gray and RAL 5000 violet blue Kwjdpfx Adov Huggowjt Net weight approx. 210 kg TECHNICAL DESCRIPTION Solid German mechanical engineering Machine stand in elegant, modern, torsion-free, double-chamber welded steel construction, upper and lower doors secured by limit switches, upper and lower precision band saw blade guides APA 2, size. 1 Finely planed gray cast iron table Table top can be swiveled up to 45° Dyn. balanced band saw wheels with vulcanized rubber bandages Stop ruler can be used to the left of the saw blade, Stop profile can be folded over Blade tension indicator 1 saw blade 4140 x 20 x 0.45 mm, tooth width 6 mm, No. 3783.20K Mechanical height adjustment of the saw blade guard using a handwheel with locking pinion Push button switch for start/stop with emergency stop button and motor protection relay Wear-free, electric motor brake CE-compliant GS tested Machine stand left-hand version Drive motor 1.5 kW / 2.0 HP Availability: short term Storage location: Flörsheim