3D coordinate measuring machine

Mitutoyo QVT1-X302P1L-D

Condition: good (used), Year of construction: 1993, ELB surface grinding machine Year: 1993 Magnetic table size: 1500x550 mm With automatic downfeed Ledoygtiwepfx Aiyjrr With wheel dresser Paper band type coolant tank Lots of grinding wheels

Condition: like new (used), Year of construction: 2022, OEM – laser marker / engraving laser (diode pumped YAG-laser) The laser beam source was used for some time to generate plasma as part of a scientific project. Overall, however, it only has few operation time. Due to the short pulse length, this laser is also very suitable as an engraving laser Laser source of the complete system is a 10 Watt diode-pumped YAG-laser with 1064 nm wavelength. The working area is 100 x 100 mm, up to 300 x 300 mm is available as an option. No external cooling is necessary. Input-voltage: 110...240 VAC / 50 Hz. Applications are laser engraving and material ablation. The control software is installed on a PC, optionally also a Laptop can be used. The language of the software can be choosen (German, English). The laser is prepared for an integration into a ‘higher level system’, but can also be used as a 'stand alone' system. Lredpfx Aispyg N Ajysr In this case interfaces for Interlock, emergency stop, laser control etc. are available. We are happy to support the customer according to his requirements.

Condition: used, Year of construction: 1980, machine/vehicle number: A-07/471A, sheet width - max.:130 mm Lrsdpscxxx Rsfx Aiyor straightening roll diameter:40 mm :5 :2+2 sheet thickness - min.:0,4 mm sheet thickness - max.:3,5 mm weight:0,4 t dimensions of the machine ca.:0,6x0,65x1,15 m with integrated, stepless adjustable Vari-drive, reversing, operating-mode switch for manual and automatic operation, introduction roller cage, position indicator of straightening rolls via analogue display, adjustment of straightening rollers via hand wheels, automatic swivel arm control, very good condition

Condition: refurbished (used), Year of construction: 2019, functionality: fully functional, GF Machining Solutions FORM X600 Year of manufacture 2019 - Factory revision 2022 C-shaped design, fixed table with lowerable container Travel paths (X/Y/Z): 600 x 400 x 500 mm Distance between table and quill: 200-700 mm Max. workpiece size: L x W x H = 1200 x 800 x 350 mm Max. workpiece weight: 2000 kg Integrated C-axis for rotation, indexing, and erosion (rpm = 0-100 rpm) Pneumatic chuck of your choice (Erowa/3R Systems) 80 amp ISPG generator Best achievable surface finish Ra 0.08 µm AC FORM HMI user interface 15" LCD color screen, mouse or touchscreen, keyboard, and hand control Incl. 3R-Systems Workpartner WPT1+ - 150 electrode positions - 10 pallet positions Lodpfx Aowh Sigjiyorr Net weight of the system: 5504 kg Machine dimensions: 1790 x 2860 x 3100 mm We will clean, service, and test the machine upon receipt of the order. Optional: - Commissioning and instruction - Transport and installation - Cooling unit - Dielectric

Condition: as good as new (ex-display), Year of construction: 2026, Centre height: 181 mm Centre distance: 1000 mm Maximum grindable workpiece diameter: 360 mm Max load cantilevered: 1000 N (100 kg) Max load between centres: 3000 N (300 kg) Z-axis: Table swivel angle: 10° Table drive, hydraulic: 0–4 m/min X-axis: Cross slide travel: 80 mm Rapid traverse (hydraulic): 50 mm Coarse adjustment – air cushion: 280 mm Infeed drive by DC motor Rapid infeed speed: 48 mm/min/Ø Infeed cycle: Plunge grinding / Longitudinal grinding 4 preselectable speeds: mm/min/Ø: 0.01–48 4 preselectable infeed increments: mm: 0.001–0.1 Automatic shut-off during stop-grinding: 0–99 s or 0–99 strokes Stepwise infeed: mm/Ø: 0.001 Grinding headstock universal, swivelling: 0–180° Grinding wheel (OD): D x width x bore: 500 x 100 x 127 mm or 203.2 mm Grinding wheel (face, option) D: 250 x 32 x 76.2 mm Grinding wheel (ID, option) D: 2–250 mm Drive power, external/face: 5.5 (7.5) kW Drive power, internal: 2.2 kW Peripheral speed, external: 35 (50) m/s Grinding wheel wear (OD): mm/Ø: 160 Guard width: 100 mm Grinding spindle diameter: 60 mm Internal spindle mounting: 80 (100) mm Workpiece headstock: Infinitely variable drive: MK 4, 1/min: 30–270 / 50–450 Workpiece spindle lockable Spindle mounting: MK 4/24 mm Spindle nose for flange attachment: MK 4, cylindrical Ø63H6 x 6 mm Lrodetqf Rzopfx Aiysr Headstock swivels on rotating part: 0–90° Tailstock: Quill mounting / Quill diameter: MK 4, 750 mm Quill stroke: 45 mm Quill force, N: 100–800 / 250–1400 adjustable Quill operation: manual (foot switch) Quill fine adjustment: ±40 μm Connections: Total machine connected load: 6.5–10 kW Grinding headstock: 5.5 (7.5) kW Workpiece headstock: 0.55 (1.1) kW Coolant filtration: 0.75–2.2 kW Lubrication pump – guideways: 0.1 kW Hydraulic pump: 1.5 kW Hydraulic tank: 80 l Pneumatics: 6 bar Comparable to: Weiss / EMAG / GP cylindrical grinders / Studer / Kellenberger / Schaudt / Tschudin / Tacchella / Dannobat

Condition: good (used), Year of construction: 2018, 1 used CNC wire EDM machine Make: Sodick Model: AQ 750 L, year 2002, overhauled by Sodick in 2018 4000 operating hours since overhaul Control: MARK 30 LN 1 W Lsdpfxeyknpgo Aiysrr Wire threading: 97 Pipe AWT

Condition: as good as new (ex-display), Demo device with less than 20 operating hours // BEST CONDITION System: Optiv M 6.6.4 multi-sensor coordinate measuring machine with Dual Z technology Probes and sensors: - 10x CNC motor zoom with digital color camera and 12-segment LED ring light - HPsS-X1H Scanning Sensor with HH-A-T5 - HP-S-X1C/H stylus holder (1xM3) - M3 stylus kit for HP-S-X1C sensor - HR-X button rack for HP-S-X1C/H (3 ports, L=400) - Sensor calibration unit without calibration artifacts - Glass standard 25mm Lsdpfxjncfd Rj Aiyjrr - Ring gauge 20mm Computers and software: - Measurement and evaluation software PC-DMIS CAD++ - Machine control unit BEST - Dell 27" monitor - work table Optional accessories: - Chromatic white light sensor (CWS) - CWS measuring head 3mm - Solara.MP12 - QA STAT 12 - O-QIS 12 Delivery, commissioning and other services on request If desired, the measuring device can be converted from OptiCheck3D V 5.0

Condition: good (used), Year of construction: 2005, Universal machining center Machine type: DMG DMU 50 Evo linear Control: Heidenhain iTNC 530 Year: 2005 SPECIFICATIONS 5-axis-simultaneous Travel X-Axis: 500 mm Y-Axis: 450 mm Z-Axis: 400 mm B-Axes: 108° C-Axis: 360° Rapid motion: (X/Y/Z): 80 / 50 / 50 m/min. Amount of controlled axes: 5 Spindle speeds: 18.000 rpm Tool: SK 40 Toolchanger Tool capacity: 30 NC-panning and rotary Table Lredpjzi Dzhofx Aiyor Table size: 500 x 380 mm Power consumption: 52 kVA KW Machine weight: 6,5 kg Req. space (LxBxH): 5,4 x 6,5 m Equipment No cooling through spindle No chip conveyor: Spänewanne Caliper Working mode: 4

Condition: used, Year of construction: 2015, total height: 5,000 mm, total length: 9,000 mm, total width: 6,000 mm, overall weight: 85,000 kg, Year of Manufacture: 2015 Machine No.: 12300000163 Control System Heidenhain iTNC 530 HSCI (3D path control) Travel Paths X: 2,700 mm Y: 2,700 mm Z: 1,600 mm B-axis: controlled universal swivel milling head C-axis: NC rotary table Ø 2,200 mm 5-axis simultaneous machining Spindle Motor spindle SK50 Speed: 20–12,000 min⁻¹ Power: 44 kW (40% duty cycle) / 32 kW (100% duty cycle) Tool holder: SK50 according to DIN 69871 Tool Changer 63-slot wheel magazine Double gripper Equipment IKZ 40 bar Chip conveyor Electronic handwheel Rotating viewing window Minimum quantity lubrication (MQL) Coolant through spindle Coolant tank 980 l Lsdezqxkmopfx Aiyjrr Mold making package Active chatter suppression (ACC) Adaptive feed control (AFC) Oil/emulsion mist separator Smartkey package Additional safety viewing windows (Visiport) Operating mode 4 (process observation) Dimensions (LxWxH) approx.: 9000 x 6000 x 5000 mm Weight approx.: 85,000 kg Year of construction: 2,015 Condition: in working order Terms of payment: 100% prepayment before pick-up Terms of delivery: EXW EX Works under power: No

Condition: used, Year of construction: 2007, turning diameter 600 mm Ledpov Rrq Defx Aiyjrr swing diameter 680 mm turning height 600 mm z-axis 500 mm x-axis 560 mm drive of main spindle 65/80 kW main spindle speeds: 2800 workpiece tool changer 12 Plätze feeds z-axis 0,01-30.000 mm/min feeds x-axis 0,01-45.000 mm/min chuck Rota NCR 630 mm voltage 400 V frequency 50 Hz control Siemens 840 D pl total power requirement 140 A weight of the machine ca. 18 t dimensions of the machine ca. 6,5 x 3,8 x 4,20 m