Used 3 Knife Trimmer for sale (64,487)

Condition: used, Year of construction: 2001, Three knife trimmer Müller Martini Merit S Year: 2001 Hour counter: 30400 Prodpfsylblkox Alwob Description: - Digital display - Infeed conveyor from the left - Automatic hopper feeder for inline production - Exchangeable cutting tables (standard set) - Knife pre-setting device - Set of knife holders: 2 - Sets of knives: 2 Maximum size (uncutted): 384 x 320 mm Minimum size (uncutted): 140 x 103 mm Maximum size (cutted): 434 x 310 x 80 mm Minimum size (cutted): 136 x 100 x 2 mm Max. mechanical speed: 1.000 - 4.000 cycles / hour Note!: Specifications are subject to typographical errors and changes in comparable models by the manufacturer!

Condition: excellent (used), Gockel G130PL x 5100mm Vertical Spindle Knife Grinder Manufacturer Gockel Model G130PL x 5100mm Year 1980 Condition Used Serial Number 5908 Stock Number 2602 Mag Chuck 800mm x 5100mm Prsdoy N Amfspfx Alwsb Segmental wheel 1000mm dia Wheel/Spindle Drive 185KW / 248hp Additional Features Year 1980 Travelling Wheelhead New Stones for Wheel Power rise and fall to wheelhead Auto down feed to wheelhead Marpos Sizing Coolant pump and separator

Condition: excellent (used), Year of construction: 2016, Ref: 11137 . 2016 Horizon SPF-200L Latest model, high speed, fully automated booklet maker with A4 landscape format capability With additional trimmer for 3 sided cutting! Features: Advanced Automation – All necessary settings for a wide variety of booklet formats can be performed automatically. Even the fold roller gap adjustment is automated so very quick changeover with minimal test sheets. 10.4’’ large colour touchscreen with icon-based display for easy operation Cost Savings –works with pre-cut 4-page sheets instead of folded signatures to eliminate the folding process. Equipped with: 3 x Horizon VAC-600Ha+m+c towers (18 Bins) PJ-77R Jogger delivery for rear collation off C tower IFU-200 connecting unit SPF 200L Stitcher and folder 2 x 43/6-S Hohner Stitching heads FC 200L Foredge trimmer Prsdpfszuth Ijx Alweb TBC-200L Top and bottom trimmer Waste paper removing conveyor PK-30 kicker LC-200 delivery Specification: Sheet Size: Max. 356 x 610 mm or 14.000” x 24.000” Min. 120 x 180 mm or 4.725” x 7.090” Sheet Weight Range: Normal Paper: 64 to 157 gsm Art Coated Paper: 84.9 to 157 gsm Stitch Thickness: Top/Side Stitch, Corner Stitch and Fold Max. 4 mmor 0.155” (About 48 sheets of normal paper 64 gsm) Production Speed: Max. 4,000 booklets per hour (A4-Finish, Portrait) Max. 3,500 booklets per hour(A4-Finish, Landscape)

Condition: used, Dreimesserautomat / Three Knife Trimmer Hörauf SN-140 Demand Baujahr / Year 2000 - Serial-No. 405060080 Formatbereich (unbeschnitten) / Paper size (before cutting) min. 80 x 60mm - max. 410 x 315mm Formatbereich (beschnitten) / Paper size (after cutting) min. 80 x 60mm - max. 380 x 300mm Stapelhöhe / Pile height max. 80mm Leistung bis zu 20 Takte/min. / Speed approx. 20 cycles per minute Online-Video-Inspection by WhatsApp - MS Zoom - Telegram Prsdswnpm Nepfx Alwjb On Stock Emskirchen/Nürnberg - Available Immediately - Can be test

Condition: good (used), Cutter knife, dicer, multi-purpose cutter, slicer and portion cutter, cutter knife, cutter knife, dicer, cutting knife, knife set, bacon cutter, gate, cutting gate -Manufacturer:CFS Convenience Food Systems,Cutting knife set for cut knife 300/400 -Type: .: 39441 1 set = 4 pieces -Quantity: 6 sets available -Price: Per set Pedpfx Aowy Uqkslwsrb -Dimensions Bos: 135/70/H55 mm -Weight: 1.2 kg

Condition: new, Year of construction: 2025, Standing seam metal roof machine F3 with length measuring device was designed by our company to produce standing seam roofing panels for the installation of roofs and facades of various buildings and structures. Sheet metal blanks are passed through the forming rolls of the machine to get the desired shape of the standing seam panel. This method of production allows you to produce panels with a speed of about 10 meters per minute and fit any roofing companies. Bfywfrix The machine is equipped with an easy width adjustment system, so it takes just a few minutes to readjust it from rolling one width to another. The F3 machine can work with panels from 200 to 700 mm wide. It is possible to work with metal sheets and coils made of galvanized steel, copper, zinc, aluminum, stainless steel, etc. Maximum metal thickness for work – 0.8 mm. Standing seam metal roof machine F3 can go in a standard set, and with additional accessories providing additional functionality of the machine and simplifying the work process. As additional options, we offer a floor decoiler, which can be used directly on the working site thanks to its lightweight and small size, so you can put the coil to the decoiler and feed it to the machine. As an optional extra, you can purchase a length-measuring device to roll roofing panels the same length and in semi-automatic mode, without marking them with tape and ruler. Using those accessories, you can really save your time and make your work more accurate. With the length measuring device, our customers very often buy a cross cutting knife in order to cut the panels of the desired length from the coil. As extra options, we also offer ribbed panels rolls to form standing seam panels with ribs and providing additional roofing system rigidity. You can use the machine with or without rolls. Extra rolls for radius panels production allow you to produce panels with a big bending radius, which allows you to use them for various structures, such as hangars, etc. We have a ready-made solution for your business for hangars roofing buildings production. For protection against various damages, we offer the use of a top cover, which prevents foreign objects from getting inside the machine and makes the working process of the machine safer - roll forming roof panel machine F3 with top cover For closing the standing seam lock our customers can use special standing seam roofing tools While installing roof panels, roofers use special fixation elements – sliding clips, so we offer punching presses for their production - sliding clip formers Thus, using a standing seam metal roof machine F3, our customers and partners can produce efficient standing seam roofing panels, and with additional accessories can make this process more convenient and faster. Pedpfx Aleh Aw Rnsworb

Condition: as good as new (ex-display), Year of construction: 2025, operating hours: 10 h, functionality: fully functional, machine/vehicle number: 36AMN, compressed air connection: 6 bar, working width: 360 mm, warranty duration: 12 months, operating speed: 420 mm/s, Komfi Laminator Amiga 3680 with HotKnife (NearLine, Generation 1) Showroom Machine, Manufactured 2025 Specifications: Min. paper format: 200 x 250 mm Paper weight: 115 x 600 g/ m2 Thickness of sheets max. 0,7 mm: Overlap > 0 Thickness of sheets max. 1,4 mm: Overlap < 0 Suitable kinds of film: Polypropylene, Polyester, Nylon Film thickness: 24-50 μm Inner diameter of film reel: 3“ = 76,2 mm Outer diameter of film reel: 350 mm Output / laminating speed: 3-25 m/min(regard. technological conditions) Maximum output: - Average monthly capacity of machine: 100 000 B2 sheets Max. paper pile: 60 mm / length of sheet < 350 mm 30 mm / length of sheet > 350 mm Max. feeding table load: 20 kg Laminating temperature: according film manufacturer – max. 135°C Sheet overlap tolerance: ±1 mm Max. pressing force (0,6MPa): 15 kN Max. pressing force (0,8MPa): 19,5 kN (WARNING = limited life of the pressure roller) Max. linear NIP pressure, press 0,6 MPa: 60 N/mm / sheet width 250 mm 50 N/mm / sheet width 300 mm 41,6 N/mm / sheet width 360 mm Linear NIP pressure= 30 N/mm: sheet width 250 mm / 0,30 MPa sheet width 300 mm / 0,36 MPa sheet width 360 mm / 0,43 MPa Feeder: Bottom Suction Vacuum Feeder Laminating Unit: Adjustable distance stoppers for lamination unit to enable processing thick substrates and windows lamination. ”On-the-fly” side-adjustable unwinding shaft with adjustable brake force. Height-adjustable and removable spread roller perfectly removes wrinkles from laminate. IR heating for laminating cylinder. Temperature sensor inside the cylinder for precise regulation. Predezh S Ugjpfx Alwob Rubber coated pressure roller. The powerful pneumatic pressure system guarantees even nip pressure and perfect lamination results. Separator & Delivery: Decurling unit consisting of bar and roller with position control to move the snapping moment automatically when the position of decurler is changed. Built-in film perforator to enable sheet separation. Cam-driven separation roller with adjustable tearing action, delivery roller and sheet skewing wheel. Fixed delivery desk with adjustable air nozzles.

Condition: used, Year of construction: 2022, functionality: fully functional, power: 6 kW (8.16 HP), input voltage: 380 V, input frequency: 50 Hz, type of input current: three-phase, number of axes: 3, total height: 1,580 mm, total length: 3,600 mm, total width: 2,150 mm, overall weight: 1,300 kg, table length: 3,000 mm, table width: 1,500 mm, 3-axis CNC router for sale. Fully operational, currently in production. Working area: 1500 x 3000 x 200 mm (X,Y, Z axis) 4.5 kW HSD Air cooling spindle 4 sets Yako Stepper motors and drivers T-Slot PVC table 20 mm HIWIN Linear Guide from Taiwan DSP A11 controller system Drive system: X/Y axes: Helical rack & pinion drive Z axis: TBI ball screw drive 5.5 kw BETA Inverter Manual Lubrication system Pjdsz Hc T Uspfx Alworb Japan OMRON limit switch Solid steel frame construction Power supply 3-phase, 380 V, 50 Hz Power 6 kW Dimension: 3600 × 2150 × 1580 mm Weight 1300 Kg

Condition: excellent (used), Year of construction: 1994, Weinig 925 Rondomat profile knife grinder Stock code: 15443 Price: request for quotation $ Subcategory: Knife grinders Producer: Weinig Model: 925 Condition: used Tag number: 15443 Machine type: Grinding machines UMCC: G6775 Producer: Weinig Model: 925 Rondomat Year: 1992 Serial number: 925-438 Description: Weinig 925 Rondomat profile knife grinder We offer turnkey services with this machine. Printable page Get a quote General technical data Shaft length 9-1/2 inches Maximum tool diameter 9 inches Motor 1.5 HP, 220/440 V 8-7/8 Maximum wheel diameter Podpfxen Ut Slo Alwerb Variable grinding wheel speeds: 1700, 2000, 2250, 2800 rpm Relief angle for back relief: 15 - 45 degrees Axial: 0 - 10 degrees Cooling liquid

Year of construction: 1987, condition: ready for operation (used), Knife grinders for 800 kofama lignum strips Sharpening bar 800 used 1987 Rating: Table Model: 800 Pjdpfx Aljh S Upiowerb Description: 800 grinders with a slat knife

Condition: like new (used), Year of construction: 2014, ROBOT BRAND: ABB MODEL: IRB 1600-6/1.45 Prjdpfx Asz Erdyjlwob TECHNICAL DESCRIPTION PAYLOAD: 6 KG MAXIMUM REACH: 1450 MM YEAR OF MANUFACTURE: 2014 CONTROLLER: IRC 5 SOFTWARE: 6 WELDING EQUIPMENT FRONIUS TPS 4000 WITH WATER COOLING 3-AXIS ABB IRBP R 300

Condition: used, functionality: fully functional, Year of construction: 1989, Hydraulic Swivel Bending Machine Manufacturer: FASTI, Type: 212 – 20 – 3 Psdpoz Hayxsfx Alworb Year of manufacture: 1989 Technical data Manufacturer: Fasti Type: 212-20-3 Year of manufacture: 1989 Working length: 2040 mm Sheet metal thickness: 3 mm Installation dimensions: L 3.30 x W 2.80 x H 2.30 m Weight: approx. 6 t Equipment - Controlled rear stop 1000 mm with ball rollers, extendable to 1500 mm - Siemens S7 control system for bending angle + rear stop - Manual adjustment of bending dies - Bending rail 12 mm - Support rail, height 130 mm, length 1,600 mm, segmented All information without guarantee. A demonstration is possible at any time in our showroom.

Condition: excellent (used), Year of construction: 1959, functionality: fully functional, pressing force: 650 t, stroke length: 400 mm, table width: 1,400 mm, table length: 1,600 mm, overall weight: 90,000 kg, working height: 1,600 mm, Equipment: safety light barrier, Becker & van Hüllen_ 35.11284 3-phase press A press in very good technical condition for sale from a liquidated stamping shop in Poland Modernized in 2023. New Simatic S7 control system and new electrical cabinet. Optical barriers installed. Possibility to check the machine in operation - The press is still connected to the power supply. Becker & van Hüllen_ 35.11284 3-phase press A press in very good technical condition for sale from a liquidated stamping shop in Poland Psdpfx Aljv Hpnljworb Modernized in 2023. New Simatic S7 control system and new electrical cabinet. Optical barriers installed as well. Possibility to check the machine in operation - The press is still connected to the power supply.

Condition: used, Year of construction: 2006, Overview This Kematec T20-3 KMT, built in 2006, dries filled bottles with air knives on their way through an enclosed tunnel before labelling. The bottles run on a 120 mm plastic chain conveyor under inclined air nozzles on both sides. The machine is still installed in a wine bottling line and can be inspected on site. Technical data - Manufacturer: Kematec - Model: T20-3 KMT - Year of manufacture: 2006 - Machine type: bottle dryer (air knife tunnel) - Conveyor: plastic chain, 120 mm wide - Power supply: 400 V, 3 phases, 50 Hz - Control voltage: 24 V DC - Overall dimensions (L x W x H): 4,500 x 1,350 x 2,600 mm Equipment - Drying tunnel with inclined air knife nozzles above and on both sides of the conveyor, fed by vertical air ducts - Infeed screw and curved conveyor sections with adjustable guide rails and quick-release clamping levers - Siemens SIMATIC touch panel (French, Dutch, German) with output counter, selector switches and emergency stops - Control cabinet with four Danfoss VLT 2800 frequency converters - Stainless steel frame on adjustable feet, enclosure with transparent hinged guard doors Pedpoz Hb Nuefx Alworb - CE marked Condition Still installed. An inspection on site is possible. Availability Available immediately. Location: Belgium.

Condition: used, Year of construction: 2015, functionality: fully functional, For sale: a professional electric CNC bending press, AMADA HFE M2 100-3. Operates very quietly due to its electric drive. Predpfjzrwc Dox Alwob The machine is in full working order and has been regularly serviced by Amada. It can be inspected and tested. The machine is sold without tooling. We can offer new tooling based on your requirements. Key information: Manufacturer: AMADA Model: HFE M2 100-3 Date of manufacture: 2015.06 Bending force: 100 T (1000 kN) Working length: 3000 mm Maximum bending length: 3340 mm Technical parameters: Distance between columns: 2705 mm Stroke: 200 mm Depth (to side frame): 420 mm Approach speed: 100 mm/s Working speed: 10 mm/s Return speed: 100 mm/s Power consumption: 10.5 kW Machine dimensions: Length: 4385 mm Width: 2430 mm Height: 2680 mm Weight: 6700 kg Equipment and accessories: Controller: Amada touch screen Upper tool clamping: Amada manual clamping Back gauge: X, R automatic. Z1, Z2, Z3, Z4 mechanical. Laser protection: CE – AKAS automatic laser If you have any further questions, we will be happy to answer them.

Condition: excellent (used), Year of construction: 2008, functionality: fully functional, Tool milling machine Kunzmann WF4/3 with Heidenhain TNC 320 control system, in very good condition, CE-compliant, from a training workshop! Technical data: >> Year of manufacture 2008, machine no. 347141 >> Fixed angular table >> Speed: continuously variable up to 4500 rpm >> Feed rate continuously variable in 3 axes from 0 to 2000 mm/min >> Rapid traverse X and Y axis 5000 mm/min >> Z axis 4000 mm/min >> Travel ranges X/Y/Z: 400/350/400 mm >> Table surface: 650 x 350 mm >> Table load: 250 kg >> Quill stroke vertical: 60 mm >> Vertical and horizontal quill - SK40 >> Hydraulic clamping system >> Weight approx. 1800 kg >> Space requirement approx.: 2.3 x 2 x 2 m >> Drive power: 15 KVA Prjdpfoz Eh Uuox Alweb Accessories and equipment: >> Heidenhain TNC 320 control system >> Hydraulic chuck vertical and horizontal >> Automatic central lubrication >> Spindle brake >> Technical documentation, spare parts diagrams, operating instructions for the control system and programming examples >> Handwheels >> Coolant system (not shown in the pictures) About the machine: Offered is a tool milling machine Kunzmann WF4/3 with a Heidenhain TNC 320 control system. This universal milling machine is in very good condition and has only a few operating hours. It comes from a company where it was only used for training purposes. It has a very easy-to-use control system. Furthermore, the machine has hydraulic chucks for both vertical and horizontal operation. The conversion from vertical to horizontal is very easy by folding down the vertical head. The guides are regularly lubricated by the central lubrication system. The Kunzmann has been mechanically and electrically inspected by us. Take the opportunity to inspect and test the Kunzmann on site under power. There are 5 identical Kunzmann WF4/3 milling machines available from a vocational school. The machines are available immediately.

Condition: excellent (used), The 21-blade trimmer saw very little use. Pedsy Drnbjpfx Alworb

Condition: good (used), Year of construction: 2001, feed length X-axis: 600 mm, feed length Y-axis: 400 mm, feed length Z-axis: 400 mm, CNC milling machine KUNZMANN - WF7/3 X-Axis: 600mm Predpfx Alewq Ndgjwob Y-Axis: 400mm Z-Axis: 400mm Table Length:650mm Table Width: 400mm Table load: 250 Stroke pinole:40mm Length: 2800mm Width: 2400mm Height: 2100mm Weight: 2000kg

Condition: excellent (used), functionality: fully functional, Automatic lathe Locatelli Ariete 3 Length of the cant max/min 1000/200mm Dimensions of the cant max/min 85×85/20x20mm Maximum length of the processed material 120mm with a hole 150mm without a hole Automatic material feeder CE certificate Complete DTR documentation Main engine with a power of 3/4kw Prjdpfxex Thw Do Alweb Two spindle speeds 2500/3600rpm Oil pump engine 2.2kw Working pressure 6-8bar

Condition: used, Year of construction: 2005, year of last overhaul: 2011, IMMEDIATE SHIPPING POSSIBLE Textile Fabric Steamer / Ager AGE 2005, used only for few years ! Then preserved and stored : VERY GOOD CONDITION LITTLE USED Make : Zimmer Type : Thermocure UHD 3 Universal Loop Steamer for the operation with saturated steam 102 - 104 °C with height temperature steam max. 185°C with hot air max. 170°C Yoc : 2005 , Prjdpfx Ajy A S Uxelweb Machine like new , used only few years in one shift, after 2011 preserved Technical Data: Max material width : 200 cms Max material content : 240 meters Loop length : max. 2,8 m Cloth qualities : woven or knitted goods – single width Max. mechanic speed : 5 - 50 m/min. Steaming duration : 5-40 minutes Heating medium : saturated steam: min. 3 bar, max. 8 bar Average steam consumption :approx. 500 - 1000 kg/h Heating medium for high temperature operation: Thermooil, 280°C, 12 m³/h, approx. 280 kW Service voltage : 3 x 400 V 50 cy. Control voltage : 230 V 50 cy Electrical drive and air fan capacity: approx. 28 kVA Compressed air : ½” , 6 bar + Thermal-oil heating unit for high temperature steam operation type HEIZA Type : HW - S - 02 / K with Weishaupt burner, fired by gas MACHINE IS REFURBISHED , PROFESSIONALLY MARKED, DISMANTLED, STORED ON MILL-FLOOR - DETAILED VIDEO AVAILABLE For more information, technical details, photos, or video , please get in touch. Shipping possible immediately.

Condition: ready for operation (used), Heidenhain UM 113 inverter, ID: 325 002-01, serial number: 7779363 – complete overhaul and testing performed by qualified personnel, including test report, with a 3-month warranty. 100% functional. Scope of delivery as shown in the photos. Pedpfx Aloz Hibfewerb

Condition: new, functionality: fully functional, Year of construction: 2026, control type: CNC control, degree of automation: automatic, actuation type: electric, controller manufacturer: Raytools, controller model: Raytools, laser type: fiber laser, laser source manufacturer: Raycus, laser source model: Raycus, laser power: 3,000 W, laser wavelength: 1,080 nm, punching diameter: 1 mm, stroke rate (min.): 60 1/min, stroke rate (max.): 65 1/min, working length: 3,000 mm, working width: 1,500 mm, sheet thickness (max.): 20 mm, sheet thickness steel (max.): 20 mm, sheet thickness stainless steel (max.): 12 mm, sheet thickness aluminum (max.): 9 mm, sheet thickness brass (max.): 7 mm, sheet thickness copper (max.): 7 mm, input voltage: 380 V, input frequency: 50 Hz, type of input current: three-phase, overall weight: 2,200 kg, total length: 3,100 mm, total width: 1,600 mm, warranty duration: 12 months, Equipment: CE marking, cooling unit, documentation/manual, emergency stop, safety light barrier, The Digima F1530 3kW is an advanced open-type fiber laser cutting machine designed for precise sheet-metal processing in manufacturing plants, metalworking companies and modern fabrication workshops. It is intended for businesses that require high cutting quality, strong performance and stable, repeatable operation in every The Digima F1530 3kW is equipped with branded components that enhance durability and cutting performance. The machine includes a RAYCUS laser source, a Raytools AUTO FOCUS cutting head, a Raytools control system, a Schneider servo system, a Japanese Shimpo reducer, H-class linear rails and an industrial TONGFEI / S&A cooling system. The entire unit is built on a heavy-duty industrial steel frame that has been heat-treated for improved stability and long-term resistance to deformation. The machine also provides flexible use of assist gases, allowing the cutting process to be adapted to the material type and the expected edge quality. Oxygen at 1 MPa can be used for carbon steel, nitrogen at 2.5 MPa is intended for stainless steel and aluminium, and compressed air at 1.4–1.6 MPa offers a more economical option for thinner parts. This gives the user better control over cutting quality, process speed and operating costs. As standard, the machine includes features that improve operator safety and protect key components. A laser-head cover helps protect the cutting head from dirt and mechanical damage, while safety barriers create an additional protective zone around the working area, improving safety during intensive production work. Podpfxozlr Sye Alwjrb The Digima F1530 3kW is powered by a 3P 380 V / 50 Hz supply, and the machine itself weighs 2000 kg. It is a modern and efficient fiber laser cutter for companies looking for a solution that combines a large working area, high precision, fast operation and industrial-grade durability. This model is a strong choice wherever reliable production, high cutting quality and future production growth are important.

Condition: used, functionality: fully functional, In this offer you purchase a used colour production system ‘Xerox Versant 180 Press’ Object of sale: 1 x Xerox Versant 180 with the following equipment: Pedpevtpnljfx Alwjrb incl. Fiery Server EX180 incl. Paperdeck A-CF03 incl. booklet finisher incl. Squarefold + Fronttrimmer Not the right equipment? It is no problem to configure the machine according to your wishes. Please feel free to contact us! Counter readings: Total: Approx. 2,573,792 pages Colour: Approx. 2,368,409 pages Black: Approx. 205,383 pages Condition: This offer is a used device, which may show signs of use (minor scratches or yellowing). (minor scratches or yellowing). The device has been tested for function A test printout can be seen in the photo Packaging and dispatch: You are welcome to view the device during our business hours. Please make an appointment for this! Seaworthy packaging and worldwide shipping available on request! A function test will be recorded on video for you before dispatch or collection. For further information, you can of course also contact us personally.

Condition: used, Year of construction: 1989, x-travel 400 mm y-travel 400 mm Pedpoz Ekzkefx Alwsrb z-travel 400 mm table surface area 700 x 460 mm spindle taper SK 40 spindle turning speed range 31,5 -5000 U/min spindle drive 5,5 kW quill stroke 80 mm vertical head swivelling +/- 90 ° control DIALOG 11 feeds x/y/z -stepless 3000 mm/min rapid traverse 6 m/min total power requirement 13,8 kVA weight of the machine ca. 2 t dimensions of machine L x W x H 2,73 x 2,0 x 2,0 m Accessories: solid table, vertical head with hydr. tool clamping and quil retraction, dividing unit HOFFMANN, RW/NC 125 L, coolant

Condition: excellent (used), Year of construction: 2023, functionality: fully functional, load capacity: 3,000 kg, Protec KT 3000 HV, hydraulically height-adjustable Podpfx Aeq U Ac Delwjrb Load 3000 KG Hand-held remote control with digital display Double foot remote control Height approx. min. 700mm horizontal, height max. 1400mm Diameter of face plate 1400mm Angle of inclination min. 135° Speed 0.05 to 0.9 rpm Motor power 3 KW we have a huge selection of turntables in all sizes from 100 kg to 30 tons load capacity Used and new machines