Used 4 Shaft Shredder for sale (61,729)

Condition: used, Year of construction: 1998, functionality: fully functional, machine/vehicle number: 98 EZ100/2675, overall weight: 4,000 kg, number of blades: 68, total length: 2,800 mm, total height: 2,500 mm, control cabinet length: 500 mm, control cabinet width: 500 mm, control cabinet height: 1,000 mm, total width: 2,000 mm, rotor length: 1,000 mm, power: 30 kW (40.79 HP), type of input current: three-phase, year of last overhaul: 2025, working width: 1,000 mm, sieve perforation: 15 mm, For sale is an ARP single-shaft shredder type EZ 100 in operational condition, ideally suited for applications in the recycling industry, plastics processing, wood preparation, as well as for industrial size reduction processes. The machine is equipped with a hydraulic feed system for consistent material intake and a robust cutting system for continuous operation. Ljdpfx Ajyiuv Dokmjru

Condition: good (used), Year of construction: 1998, Motor power [kW]: 150 (2x75) Number of blades on the shaft: 48 (2x24) Blades [mm]: 80x80x45 mm (reinforced/extended mounting threads). New, square. 4 blades, of which 3 blades are 100% and 1 blade is approximately 70% new Rotor: Shaft width [mm]: 2,100 Number of shafts: 2 Shaft diameter: 500 mm Shaft speed [rpm]: 75-165 Screen diameter [mm]: 30 mm Chamber dimensions [mm]: 2,100 x 1,250 Automatic start: Soft start Lrodpfx Ajibzbhjkmsu Rated voltage: 3 x 400 V/50 Hz Rated current: 160 A-200 A Automation: Siemens Simatic Weight [kg]: approx. 14,500 Dimensions: Length [mm]: 3,850 Width [mm]: 2,720 Height [mm]: 2,700 Documentation: German 2014 A complete overhaul was carried out. A list of these parts and pictures are available upon request. This machine has not been used for several years (since then - one owner). Previously, it processed plastic, film, and cardboard - RDF after selective recycling. The approximate throughput for materials like the above (lightweight) is about 1-1.5 tons/hour. Other materials - to be checked/discussed. The machine was fully functional and is currently stored on site. Additional photos and video available upon request.

Condition: refurbished (used), Year of construction: 2023, functionality: fully functional, machine/vehicle number: A230159, For sale: Refurbished shaft set for Arjes Impaktor. The shaft set has been completely overhauled and inspected for cracks. It is in good technical condition and ready for immediate use. All tools are new and made from HB500. The shaft set is ready for installation and can be supplied with either EVO 1 or EVO 2 cassette, as required. We accept your old shafts in part exchange. Price and further details upon request. Cost-effective shipping available throughout Europe. Tecweld GmbH is a company specializing in the refurbishment of wear parts. Our focus is on the repair and reconditioning of crusher and shredder shafts. This is precisely where our core competence lies. Thanks to our many years of experience and expertise, we are able to offer cost-effective solutions. In many cases, professional refurbishment is significantly more economical than purchasing new parts or carrying out time-consuming repairs in-house. For our customers, this means reliable technology, predictable costs, and an economical alternative to replacing new components. Lredjx Td Npopfx Akmeu Please feel free to contact us – we are happy to advise you.

Condition: new, Year of construction: 2026, functionality: fully functional, total length: 1,580 mm, total width: 2,320 mm, total height: 2,600 mm, input voltage: 400 V, Equipment: documentation/manual, emergency stop, type plate available, Applications & Customer Benefits The ASCO DS 600 is the ideal double-shaft shredder for recycling companies, municipalities, construction logistics, and industrial waste management. It reliably shreds wood, green waste, plastics, foils, pallets, and packaging with compact efficiency, low maintenance, and flexible stationary or mobile operation. Key Features: • Robust counter-rotating shafts for powerful shredding • Versatile material handling across industries • Space-saving compact design • Easy operation with automatic reversing • Fast, user-friendly maintenance Tech Highlights: Ledpew Afvpjfx Akmsru W 2.32 m · L 1.58 m · H 2.60 m · Cutter Ø 200–350 mm · Speed n 10-60 rpm · Power 8-60 kW · Weight 1870–2590 kg · Infeed 0.95 × 1.18 m · Discharge 0.60 × 0.60 m

Condition: good (used), Year of construction: 2017, operating hours: 12,000 h, Single-shaft shredder with pusher floor Rotor diameter: 500 mm Rotor width: 1300 mm 87 knives on the rotor Knife size: 40 x 40 mm Motor: 75 kW with hydraulic pusher floor: 7.5 kW Ljdpfx Akozbzuwomeru Screen with 20 mm and 30 mm openings Hopper capacity: 14 cubic meters with discharge conveyor belt, approx. 3 m long Total weight: approx. 10 tons

Condition: reconditioned (used), Year of construction: 2017, functionality: fully functional, power: 405.26 kW (551.00 HP), Mobile shredder on crawler chassis. Diesel engine: 551 HP Folding discharge conveyor Lrodpfsu R Uaxex Akmou Overbelt magnet (neodymium) Radio remote control Detailed description: see pdf-file

Condition: used, Year of construction: 2010, functionality: fully functional, overall weight: 39,000 kg, rotor length: 3,200 mm, power: 320 kW (435.08 HP), rotational speed (max.): 58 rpm, input voltage: 400 V, Completely Overhauled Machine: Delivery time: November 20, 2026 Slow-speed, robust single-shaft shredder suitable for the pre-shredding of various materials without large contaminants. Application: Shredding of industrial and commercial waste, films, packaging materials, textiles, paper, rubber, demolition wood, pallets, paper rolls, cable drums, mixed plastics for thermal and material recycling, loose or pressed into bales. Lindner Jupiter 3200 Drive power: 2 x 160 kW (ABB) Screen perforation: Screen holes 148 mm Control cabinet: complete with (frequency converter - ABB) Cooling system: included Working opening: 3190 x 1750 mm Filling volume: approx. 8 m3 Rotor length: 3190 mm Ljdewkilwopfx Akmjru Rotor diameter: 745 mm Rotor speed: 50Hz: 58 rpm Number of rotor knives: 36 pieces Knife dimensions, cutting knives: 145 x 145 mm Counter knives at the bottom: 9 pieces Stripper comb at the top: 9 pieces Feed system, hydraulic: 11 kW Total weight: approx. 39 t Dimensions L x W x H mm: 6250 x 3260 x 3090 mm Hopper: included Delivery time: November 20, 2026

Condition: ready for operation (used), Year of construction: 2005, operating hours: 8,562 h, functionality: fully functional, Single-shaft shredder, rotor ripper, hydraulic drive, HÄGGLUNDS hydraulic power unit, SIEMENS 132 kW electric motor, cutting chamber approx. 2800 x 1300 mm, shaft length approx. 2400 mm, feed hopper 4000 mm x 2500 mm, base/frame split for transport purposes, dimensions: length 4500 x width 3300 x height 1400 mm. Inspection and test run possible by appointment. Lrodpfjv Hr Nxjx Akmou

Condition: new, Year of construction: 2026, functionality: fully functional, rotor length: 900 mm, Equipment: documentation/manual, emergency stop, type plate available, Applications & Customer Benefits ASCO DS 600 and DS 900 double-shaft shredders deliver reliable shredding performance for recycling, waste management, municipalities, and construction logistics. Designed for wood, green waste, plastics, foils, pallets, packaging, and production residues, they ensure high throughput, low maintenance, and efficient material reduction-even with heavy or resistant waste. Key Features: • Compact yet powerful double-shaft shredders for diverse materials • Robust, durable construction with maintenance-friendly design Lsdpfx Akew Dc S Domoru • Counter-rotating shafts for secure and controlled shredding • Large filling opening (DS 900) for bulky and heavy materials • Intuitive control system with automatic reversing to prevent blockages Tech Highlights Rotor Ø 200-350 mm · Rotor L 900 mm · Rotor n 10-60 rpm · Power 8-60 kW

Condition: refurbished (used), Year of construction: 2014, overall weight: 25,000 kg, Doppstadt DW 3060 Buffalo type C - Year of construction 08/2014 - Operating hours 7275 - Engine Mercedes Benz 430 HP - AD Blue - Roller : 21 teeth - Overband magnet - Remote control Lredpfx Aksygnk Aemeu - Hydraulic drive ( self drive) Machine is overhauled and immediately available

Condition: new, Year of construction: 2026, functionality: fully functional, machine/vehicle number: 8813, power: 160 kW (217.54 HP), rotational speed (max.): 85 rpm, Details: • Includes screen • Voltage: 400V/50Hz, TN-C • Cutting unit 43P • 1 x 160 kW, IE6, 87 rpm • Mechanical central lubrication • Hopper • Power control with frequency converter, including air conditioning (up to +40°C) Lrjdpfxjxup Epe Akmsu • Rotor cooling preparation (connections) • Counterknife cooling (connections) • Lindner ATB – Automatic belt tensioning system with belt coupling • Energy measurement module • Bus connection to external control system • Basic package – cable material up to 5 meters • Wear protection package (checked pattern for 43P) • Machine operation down to -25°C • Control cabinet enclosure for temperatures down to -25°C

Condition: new, Shafts dedicated for IMPACTOR 250/850, COMPACTOR 300, EKOMAXX 800. Option to place orders including cassette and screen basket. - BETONWELLE - PADDLE - STAR (4-KNIFE, 6-KNIFE) - TRAPEZOIDAL PROTECHNIKA is a company with 21 years of experience, specializing from the outset in the production of spare parts and complete recycling lines. In recent years, we have expanded our portfolio to include the manufacture of cutting shafts for slow-speed shredders. By implementing automated welding processes and utilizing proprietary production technology, we have minimized production times while maintaining consistent, high quality. The production of cutting shafts is carried out serially, which among other benefits, enables us to collaborate with machinery manufacturers as an OEM partner. What sets PROTECHNIKA apart from the competition? It's simple! - Certified 3.1 materials - TUV SUD Rheinland quality certification - ISO 9001 compliance - Automated welding process / ISO 15613 / ISO 15614 - Welders qualified to ISO 9606-1 - ISO 9001:2015 - ISO 14001 - Independent design department capable of meeting all customer requirements - Proprietary RESEARCH AND DEVELOPMENT CENTRE Ledpfxsx Hhkqj Akmsru Customer relations are of the highest importance to us, because their satisfaction is our success!

Condition: refurbished (used), Year of construction: 2026, overall weight: 13,000 kg, Completely overhauled pre-shredder VZ 110. - Engine 110 kW - Screen D 40 mm - Fully refurbished with new rotor shaft, cutter bars, sprockets with triplex chain. - Gearbox inspected and newly fitted with bearings - Clutch inspected and newly fitted with bearings - Engine inspected and newly fitted with bearings - Machine repaint: old paint removed, primed, and new finish applied Repair of your defective machine or new fabrication possible Lrodpfx Akoyk Ea Aomju

Condition: good (used), Year of construction: 2014, operating hours: 18,520 h, Single-shaft shredder, especially suitable for secondary shredding and granulation of pre-shredded material. Application: Commercial waste for thermal or material recovery, e.g. paper, cardboard, plastics and foams, rubber, leather, textiles, floor coverings, etc. Lindner Power Komet 1800 Year of manufacture: 2014 Ledpfxswxmb Ej Akmjru Control cabinet; complete with ABB frequency converter, Recooler Operator panel Hopper Drive motors: 200 kW Hydraulic unit: complete Total weight approx. 21 t Dimensions approx. LxWxH mm: 5000 x 2800 x 3000 mm Inspection: possible upon arrangement. Delivery time: immediate.

Condition: used, Year of construction: 2012, functionality: fully functional, overall weight: 25,300 kg, power: 210 kW (285.52 HP), For sale is a single-shaft shredder from Doppstadt. It is currently still integrated in our production and can be inspected on site. The conversion is scheduled to take place around the end of July 2026. Lrodpfx Akoyrgibjmju All technical specifications can be found in the images. If you have any further questions, please feel free to contact us.

Condition: good (used), Year of construction: 2005, functionality: fully functional, LINDNER KOMET 2200 SHREDDER Shredder for Refuse-Derived Fuel (RDF) and plastic Two 132 kW motors Number of blades on the rotor: 60 Blade dimensions: 175 x 57 x 28 mm Number of fixed blades: 12 Screen with a 30 mm hole diameter Production: 7 tons per hour Year: 2005 Ljdpfxezd Hqhj Akmsru

Condition: new, Year of construction: 2026, functionality: fully functional, overall weight: 3,000 kg, rotor diameter: 400 mm, number of blades: 10, total length: 1,120 mm, total height: 1,950 mm, control cabinet length: 500 mm, control cabinet width: 300 mm, control cabinet height: 1,500 mm, total width: 1,210 mm, rotor width: 600 mm, power: 22 kW (29.91 HP), type of input current: three-phase, sieve perforation: 6 mm, warranty duration: 12 months, input voltage: 400 V, inner dimension width: 590 mm, opening width: 400 mm, Equipment: CE marking, ZERMA GS 400/600 – High-Performance Granulator | Precision. Performance. Reliability. Experience the new ZERMA GS 400/600 high-performance granulator in action. The GS series was developed for the highest demands in plastic recycling and combines maximum performance with exceptional reliability and easy maintenance. Highlights ✔️ Rotor diameter: 400 mm ✔️ Rotor width: 600 mm ✔️ Proven ZERMA V-Cut technology ✔️ 5-knife rotor ✔️ 3 stator knives ✔️ Robust steel construction Lodezmhgiopfx Akmoru ✔️ Intelligent drop-down cutting system ✔️ External knife adjustment ✔️ Robust bearing outside the cutting chamber ✔️ Optional bypass hopper for long profiles and pipes ✔️ Designed for continuous industrial operation Typical applications * Packaging tapes (at 8 mm, 600 kg/h) * Runners and injection molded parts + start-up lumps up to 1 kg * Plastic profiles * Pipes * Sheets * Films * Blow molded parts * Engineering plastics * Production waste * Post-industrial recycling The GS 400/600 stands for precise shredding, high throughput, and long service life – the ideal solution for modern plastic processors and recycling companies.

Condition: ready for operation (used), Weima WLK 12 Specifications Motor Power: 100 hp (75 kW) Lrsdpfx Akew U Txujmju Feed Opening (Infeed): approximately 6.2′ × 5.9′ (1,920 mm × 1,800 mm) Rotor Diameter: ~14.4″ (368 mm) Rotor Width / Length: ~47.2″ (1,200 mm)

Condition: new, Year of construction: 2018, functionality: fully functional, power: 25 kW (33.99 HP), New in box specialized food waste shredder. Manufactured in 2018 but has never been used, still in box. Ledpfx Akswq Rapjmsru

Condition: used, Year of construction: 2017, functionality: fully functional, power: 250 kW (339.91 HP), Electric drive: 250 kW Including control cabinet Lsdpfxjyuvr Rj Akmsru

Condition: used, Year of construction: 1997, functionality: fully functional, Weima WLH 6S/37 wood chipper/shredder Rotor length: 800 mm Number of knives: 42 Rotor speed: approx. 300 rpm Rotor diameter: 368 mm Ljdjzzvfvjpfx Akmsru Number of screens with 20 mm diameter holes Main motor power: 37 kW Technical documentation and CE certificate included Vibratory feeder with a length of 365 cm Year of manufacture: 1997

Condition: excellent (used), functionality: fully functional, motor power 7.5 kW hydraulic pressing drawer hydraulic pump motor power 1.5 kW hopper dimensions 870x425 mm screen 15 mm Lrodpfx Akezx Suhjmou container with opening sensor CE marking technical documentation year of manufacture 1996

Condition: new, Year of construction: 2026, overall weight: 2,200 kg, total length: 1,900 mm, total height: 2,000 mm, total width: 1,450 mm, WT-600 Single-Shaft Shredder for Solid Waste Recycling The WT-600 industrial single-shaft shredder is designed for the size reduction and recycling of solid and bulky waste materials. It is suitable for processing rigid plastics, PVC, PE and PP pipes, PP Big Bags, plastic lumps, rubber, wood, paper and other solid waste materials. The machine uses a hydraulic force-feeding system to continuously push the material toward the rotor. The low-speed rotor provides high torque, allowing efficient shredding of tough, thick and bulky materials. The WT-600 features a heavy-duty construction with a 30 mm thick shredding chamber, SKD11 wear-resistant knives Technical Specifications • Model: WT-600 • Type: Single-Shaft Shredder for Solid Waste Recycling • Processing Capacity: 200–250 kg/h, depending on the material • Main Motor Power: 22 kW • Crushing room dimension: 480 × 900 mm • Shredding Chamber: 600 × 800 mm • Effective Rotor Length: 600 mm • Rotor Diameter: 260 mm • Rotor Speed: 75 rpm Lrsdpfxoz I Tufj Akmou • Rotating Knives: 30 pcs • Fixed Knives: 2 pcs • Knife Material: SKD11 wear-resistant tool steel • Knife Hardness: HRC 60 • Shredding Chamber Wall Thickness: 30 mm • Shredder Body Material: S235 steel • Machine Weight: 2,200 kg Hydraulic System • Hydraulic Pump Motor: 2.2 kW • Maximum Hydraulic Pressure: 10 MPa • Material Feeding: Hydraulic force-feeding system • Oil Cooling: The hydraulic power unit is equipped with a heat exchanger for hydraulic oil cooling, ensuring stable oil temperature during continuous operation Control & Components • Electrical Control Cabinet: Included Suitable Materials: rigid plastic waste, PVC, PE and PP pipes, plastic lumps, PP Big Bags, rubber, wood, paper and other solid and bulky waste materials.

Condition: new, Year of construction: 2026, power: 45 kW (61.18 HP), Single-Shaft Shredder WT40100 – 45 kW – Hydraulic Pusher – NEW GrabTrade has specialized in the sale of machinery and complete technological solutions for the recycling industry for many years. We are an official representative of 3E Machinery in Poland. We offer new and used shredders, granulators, and complete recycling lines. We offer a new industrial single-shaft shredder, 3E Machinery WT40100, equipped with a 45 kW main motor and a hydraulic pusher system. The WT series is designed for the pre-shredding of large and bulky materials that cannot be fed directly into granulators due to their size and structure. The hydraulic pusher automatically pushes the material towards the rotor, ensuring efficient and stable shredding. TECHNICAL SPECIFICATIONS: Model: WT40100 Type: Single-shaft shredder with hydraulic pusher Main motor power: 45 kW Hydraulic motor power: 2.2 kW Rotor length: 1,000 mm Rotor diameter: 390 mm Rotor speed: 74 rpm Rotor knives: 58 pcs. Fixed knives: 2/4 pcs. Standard screen perforation: 40 mm Cutting chamber: 1,410 × 1,000 mm Machine dimensions (L × W × H): 2,825 × 2,004 × 1,875 mm Discharge height: 500 mm Weight: approx. 4,000 kg Control system: Siemens components / Siemens LOGO PLC Condition: Brand new Technical parameters according to the WT series specification published by GrabTrade. APPLICATIONS: The WT40100 is suitable for shredding a wide range of materials, including: PP, PE, HDPE, and LDPE plastics, plastic lumps and purgings, PVC, plastic pipes and profiles, film waste, crates, boxes, and containers, wood and pallets, Lrjdpfsq Sp H Tsx Akmsu paper and cardboard, textile waste, carpets and Big-Bags, cable waste, industrial and bulky waste. The hydraulic pusher system continuously pushes the material towards the cutting rotor, providing effective processing even with bulky or irregularly shaped waste. The shredder is equipped with a robust low-speed rotor, an external bearing system, and overload protection. The machine can also be integrated with a granulator, conveyor, screw conveyor, or other equipment to create a complete shredding and recycling line. 3E Machinery specifically showcases the WT40100 operating together with a PC4280 granulator as a complete shredding system. Machine available in our offer. We provide professional technical advice, commissioning, after-sales service, and full access to spare and wear parts. Full range of our shredders, granulators, and complete recycling lines: GrabTrade – shredding and recycling machines.

Condition: used, Year of construction: 2025, operating hours: 650 h, functionality: fully functional, overall weight: 27,000 kg, total length: 10,030 mm, total height: 3,675 mm, total width: 2,540 mm, rotor length: 3,000 mm, power: 405 kW (550.65 HP), ejection height: 4,030 mm, For sale is a PRONAR MRW 1.300 single-shaft pre-shredder (mobile slow-speed shredder) in very good condition. Similar design to the legendary DW-3060 "Buffalo". We are very satisfied with the machine, which is in top condition and has only a few operating hours. The reason for the sale is solely that the input material for the company has changed, and therefore a change to a different (chipping) shredding technology is necessary. The machine is regularly used and can be inspected upon request! Lrsdpfx Akjzrd Tiemsu Diesel engine Volvo Penta 405kW/550 hp, Stage 5 Rotor with 42 bolted tools; length 3000 mm 3-axle chassis with 27 tons; approved for up to 80 km/h 2 screening baskets Overband magnet Long discharge conveyor; discharge height 4030 mm Central lubrication Radio remote control Hopper volume 6.4 m³ / hopper dimensions 3650x2200 / hopper discharge height 2870 mm Direct sale by Hannes Schirnhofer - Schirnhofer wood chip production - Flattendorf, Styria