Used Abwickeln Reel Coil for sale (1,890)

Condition: good (used), Maximum inner roll diameter: 1300 mm Minimum inner mandrel diameter: 700 mm Nwsdpfoik E R Uox Am Uek Maximum roll width: 700 mm

Condition: good (used), Stainless steel tank 50700l Diameter 3m Height 7.7m Stainless steel coil inside at the bottom of the tank. AISI304 stainless steel Flat bottom with a slope of 2.5% downwards. Nodstr Dvaspfx Am Uowk - Stainless steel hatch 410 x 520 with outward opening - Stainless steel drain valve DN70 - Stainless steel test pipe - Liquid level gauge 16 pieces available.

Condition: used, empty load weight: 7,360 kg, maximum load weight: 25,640 kg, overall weight: 33,000 kg, axle configuration: 3 axles, first registration: 01/2017, next inspection (TÜV): 01/2027, suspension: air, tire size: 385/65 R22.5, Equipment: ABS, Krone SD Tautliner | Edscher sliding roof | Coil well | BPW axles with disc brakes | Toolbox | Tyres: 385/65 R22.5 | Perforated frame for load securing | Valid inspection certificate/TÜV until 01/2027 | Subject to errors, input mistakes, and prior sale. Nwedsy D S R Nepfx Am Usk

Condition: used, DECOILER DIMECO WIDTH: 1350mm COIL WEIGHT: 12t WITH INVERTER HYDRAULIC OPEN / CLOSE Nwodpfx Amjytqxps Uok

Condition: good (used), Coil reel, unwinding reel, winding reel Load capacity: 10 tons Spreading range: up to 508 mm Spreading mandrel length: 1500 mm Several units available Nwedpsipx Ufofx Am Uek Frequency inverter control Control cabinet has been newly refurbished. Hydraulic tensioning of the coil. The reel can be moved laterally using 4 rollers. Year of manufacture and manufacturer unknown.

Condition: excellent (used), Year of construction: 2019, overall weight: 500 kg, total length: 2,000 mm, total width: 1,600 mm, total height: 2,200 mm, Load capacity: 2,200 kg Table – Ø: 1,525 mm Band width: max. 150 mm Band thickness: max. 1.27 mm Stack height: max. 760 mm Nwedpfxezvqzzs Am Uok Speed: max. 10 RPM, continuously adjustable Design: o Frame in a robust welded construction o Loop control via a joystick with a roller o Speed can be pre-selected via a display o Right/left rotation o Fixture for inner diameter

Condition: new, Year of construction: 2026, neu 2026 070236 September 2026, Zwischenv Türkei 6900 € 133.17 € 500 kg 1200 mm 400 mm 550 mm 300 mm 80 mm 1450 mm 1200 mm 1640 mm 260 kg motorized drive mechanical adjustable coil mandrel with 4 jaws Nwjdpfx Amewirmuj Uok speed control for decoiling speed aswell as acceleration- and deceleration times photoelectric proximity ensor SICK for sag control PNEUMATIC PRESSURE ARM ALTERNATIVES (prices on request): Version without pneumatic pressure arm Version with brake, without motor, with or withaout pneumatic pressure arm

Condition: used, empty load weight: 7,204 kg, overall weight: 39,000 kg, axle configuration: 3 axles, first registration: 01/2020, next inspection (TÜV): 11/2026, loading space length: 13,620 mm, loading space width: 2,480 mm, loading space height: 2,900 mm, loading space volume: 97 m³, suspension: air, tire size: 435/50 R19,5, color: silver, Year of construction: 2020, Equipment: ABS, Unladen weight: 7204 kg, permissible total weight: 39000 kg, load securing with certificate, cargo space (L W H): 13,620 mm x 2,480 mm x 2,900 mm, tire size: 435/50 R19.5, certificate DIN EN 12642 (Code XL), cargo space volume: 97 m³, 1st axle: , 2nd axle: , 3rd axle: , air suspension, underrun protection, electronic braking system EBS, bolted chassis, portal doors, sliding tarpaulin, connection plug 1x15 and 2x7 pole, anti-splash guard, lifting roof (hydraulic), telematics system. You can find our entire vehicle range at [website address]. Would you like financing? With our Value Added Services, we offer you individual financing options, full-service, and telematics services. We will be happy to advise you. Nedpjzvihmjfx Am Uowk

Condition: used, maximum load weight: 34,200 kg, overall weight: 42,000 kg, axle configuration: 3 axles, first registration: 05/2023, next inspection (TÜV): 06/2027, Equipment: ABS, Excerpt from the equipment list. Complete equipment list available upon request. Frame Regular ladder frame in lightweight steel construction with continuous crossmembers. Maximum distributed load of 30 tons evenly distributed over approximately 1.5 m around the center of gravity of the payload. Coupling plate approximately 8 mm thick, with a 2-inch kingpin according to DIN 74080 / ISO 337. Coil trough with a length of approximately 9,000 mm (design according to VDI Guideline 2700) for accommodating coils with a diameter of at least 900 mm and up to 2,100 mm. Chassis Axle lift mechanism on axle 1. Control of the axle lift is fully automatic and load-dependent. Starting aid Activated by pressing the brake pedal 3 times; 30% overload up to a speed of 25 km/h. Operation on the chassis via a switch. Can also be operated from the cab (switch in the cab required - PIN 12). Three-axle unit SAF INTRADISC With disc brakes Ø approximately 430 mm, track width 120. Air suspension with approximately 180 mm of travel. Vehicle tires 6x 385/65 R 22.5, 160J 6 steel rims 22.5 x 11.75, offset approximately 120 mm (ET 120). Chassis components Fifth wheel supports, mechanical, with compensating foot, 24-ton lifting capacity, single-sided operation on the right side when driving. Splash protection system (spray mist suppression) in accordance with Regulation (EU) No. 109/2011 for three-axle unit with tires 385/65 R22.5, consisting of 1 pair of quarter-circle fenders in front of the axles, 1 pair of straight fenders with mud flaps between the 1st and 2nd axles, and 1 pair of quarter-circle fenders with mud flaps behind the axles. Lateral protection device according to ECE-R73. Storage for 8 square tube inserts, dimensions approximately 340 x 220 x 2,150 mm, installed behind the axle unit. 2 plastic toolboxes, waterproof, dimensions (internal) approximately 545 x 400 x 400 mm. Installed at the rear, 1x on the left and 1x on the right. Brake / Air suspension system EBS system 2S/2M with stability program (includes ABS/ALB function). Air suspension system including 1 lifting and lowering valve, mounted on the left side when driving behind the axle unit. Vehicle height is adjusted automatically. Nwedpfxozu Uvye Am Usk Floor Mounted version on both sides. Steel pallet load securing bars with VarioFix hole pattern (screwed on), on the left and right side when driving, for a width of approximately 2,468 mm (loading height reduced by approximately 20 mm under the outer frame). Flat floor approximately 30 mm thick, multi-layer glued plywood, recessed in the area of the coil trough. Coil trough side walls covered with plywood sheets approximately 18 mm thick. Floor caulked around the entire perimeter. Coil trough cover made entirely of wood, with a flat floor approximately 27 mm thick. Pocket for square tube inserts approximately 80 x 80 mm, arrangement according to drawing A2, 2 pairs on the longitudinal beam in the 1st and 2nd position, 8 pairs in the outer frame. 8 pairs of pockets in the coil trough for accommodating square tube inserts approximately 80 x 80 mm, arrangement: 1st pair at the beginning of the trough at the front, 2nd - 7th pair according to standard drawing, 8th pair at the end of the trough. Superstructure Quick clamping device at the front for the side tarpaulin with tensioning shafts and rocker arms. Quick clamping device at the rear for the side tarpaulin with tensioning shafts and ratchet. Meets superstructure strength according to EN 12642 XL (VDI 2700), tes

Condition: ready for operation (used), Year of construction: 2006, material width 650 mm coil weight 15 t material thickness 16 mm Nsdpfx Amszu A Sco Uewk The year of construction is estimated, the system is as good as new

Year of construction: 2022, condition: ready for operation (used), A GSW decoiler is available. Load capacity: 3000kg, strip width: 650mm, max. strip cross-section: 107.5mm/0.35mm, machine dimensions Y/Z: approx. 1150mm/2000mm. An on-site inspection is possible. Nsdpfxsyz Apws Am Uowk

Year of construction: 1995, condition: ready for operation (used), A defective CNC spring coiling machine BB Spring (Babbio) is available. Wire thickness range: 3mm-8mm, max. outer diameter: 120mm, wire processing speed: 90m/min, power: 35kW, machine dimensions X/Y/Z: approx. 2750mm/3150mm/2700mm, weight: approx. 4000kg. Including a winch plate for winching left springs and a torsion spring device. The motor and drive of the machine are defective. Documentation available. Nwjdpjvripmjfx Am Uok

Condition: used, Year of construction: 2003, functionality: fully functional, machine/vehicle number: 2188, product width (max.): 1,500 mm, input voltage: 400 V, SWAH LCP-01 A high-performance, automated production line for the manufacturing of rectangular ductwork. The SWAH LCP-01 is a robust European system designed to transform coil material into finished, reinforced rectangular duct sections with maximum efficiency. Nodpfx Aezbh Ausm Uswk Specifications • Manufacturer: SWAH s.r.o. (Czech Republic) • Model: LCP-01 • Year of Manufacture: 2003 • Serial No. (M. No.): 2188 • Application: Fully automated production of rectangular ducts from coils. This line is a complete system, including • 4 Decoilers Station: To hold and feed heavy sheet metal coils (allowing for quick changes between different material thicknesses or widths). • Straightening & Leveling Unit: Ensures the sheet metal is perfectly flat before processing. • Beading/Stiffening Station: Automatically forms longitudinal stiffening ribs (V-profile) to ensure the structural integrity of the rectangular ducts. • Automated Notching & Cutting: High-precision hydraulic system for cutting to the exact programmed length. • Folding/Bending: Processes the material for easy "L" or "U" shape formation or full duct sections. • Material Thickness: Galvanized Steel: 0.4 mm – 1.2 mm Stainless Steel: 0.4 mm – 0.8 mm Condition & Availability • Status: Fully operational and in good working condition. • Ready for delivery

Condition: used, functionality: fully functional, machine/vehicle number: WFDFLT33902029406, empty load weight: 5,800 kg, maximum load weight: 29,200 kg, overall weight: 35,000 kg, axle configuration: 3 axles, first registration: 12/2021, next inspection (TÜV): 06/2027, loading space length: 13,650 mm, loading space width: 2,480 mm, loading space height: 2,790 mm, total length: 13,850 mm, total width: 2,550 mm, total height: 4,000 mm, suspension: air, tire size: 385/65 R22.5", color: silver, Chassis / Haulage Semi-Trailer Nwedpfx Aowhp A Dom Usk Fine-grain steel welded construction, lightweight design. Fifth wheel plate with replaceable 2" kingpin. Coil well approx. 8,040 mm long. 6 coil supports (coil pockets, inner dimension 82 x 52 mm). Coil cover with screen-printed panels and steel sub-beams. 2x split coil-well covers, each approx. 293 mm wide, weight approx. 13 kg per cover. Outer frame slightly angled with "Load-Lock" profile for strap attachment. Note: when side boards are fitted, they must be opened to attach the straps. 9 pairs of lashing rings, 5t each, recessed in the coil well area. 24t 2-speed landing legs, single-side operation, straight foot, without shock compensation. Note: rear swing clearance (without legs) approx. 1,930 mm. Pull-out ladder at rear. Side door retainers. 2 wheel chocks with holder. Aluminum side underrun protection, with cross- and longitudinal-beam mounted brackets for aluminum slats. Aluminum rear underrun protection. Half-shell mudguards with EC-compliant anti-spray flaps. Rear bumper/impact protection. 1 plastic tool box. 2 pairs of stake pockets recessed in the outer frame, approx. 72 x 42 mm inner dimension, positions 1 & 2 per old Fliegl stake data sheet (as AU 19219). 2 additional stake pockets recessed centrally in the floor, approx. 72 x 42 mm inner dimension, positions 1 & 2 per old Fliegl stake data sheet (as AU 192198). Note: stake pockets/plug-in stakes are not designed to secure long materials, pipes, etc. on their own, without additional lashing. Axles & Suspension SAF disc brake axles, 430 mm disc diameter. Axles/chassis laser-aligned to reduce tire wear and fuel consumption. Staggered axle spacing 1,410/1,310 mm (combined transport) up to 44t gross combination weight. Air suspension. No lift axle. Please note: Photos are archive images — the actual vehicle may still be in use / show signs of use.

Condition: used, axle configuration: 3 axles, first registration: 01/2020, color: other, Year of construction: 2020, Empty weight: 7.020 kg Nodpszuwkmsfx Am Uowk Axle 1: left 8 mm right 8 mm Axle 2: left 8 mm right 8 mm Axle 3: left 8 mm right 8 mm

Condition: new, Year of construction: 2026, Motor power: 7.5 kW - Cutting force: 30 tons Cutting channel designed for: - Maximum roll length: 1500 mm - Maximum roll diameter: 1250 mm - Machine weight: approximately 3800 kg - Tank capacity: approximately 110 liters - Hand protection grille in the area of the control panel and on the opposite side - Knife locking mechanism - Straight design slitter table - Documentation: 2 copies in German (1 printed, 1 on USB) - Color: RAL 5012 - light blue Protective grille/knife beam: RAL 1028 - melon yellow Machine in stock, immediately available Nsdoltmi Sjpfx Am Uowk Price and further information upon request.

Condition: like new (used), functionality: fully functional, Year of construction: 2024, control type: CNC control, degree of automation: automatic, actuation type: electric, For sale: lightly used sheet metal rewinding machine SVM-100, designed for automatic rewinding of sheet metal from large coil rolls into smaller rolls of 25m2 (1250*20,000 mm). The machine was manufactured in 2024, has been used very little, is in excellent technical and visual condition, and is fully ready for operation. It is an excellent solution for companies that produce roofing materials or other sheet metal products supplied in rolls. The machine automatically: - Unwinds the sheet metal from the coil up to 1 ton. If you want to rewind from 2-5 ton coils, an automatic unwinding unit is required to feed the sheet metal. - Winds the sheet metal into a roll. - Cuts the sheet to a specified length. - Allows the roll to be wrapped with stretch film. - Applies protective film to the surface of the sheet metal. The machine is connected – it can be inspected and tested. Technical specifications: Manufacturer: Foldsolutions / UAB Pakservisas Model: SVM-100 Year of manufacture: 2024 Made in: Lithuania Operating parameters: Sheet metal width: 1230–1260 mm Sheet metal thickness: 0.4–0.6 mm Nwodpfezibwgex Am Uok Maximum roll length: 20 m Roll diameter: approx. 300 mm Equipment: Automatic sheet metal winding Sheet metal cutting to a specified length Automatic roll packing process with stretch film Option to use protective film on the sheet metal Integrated length measuring encoder Touchscreen control panel Manual and automatic operating modes Pneumatic cutting system Adjustable operating speeds Length calibration function for precise production Emergency stop system Technical data: Electrical power: 400 V / 50 Hz / 3 phases Power: 2.6 kW Required compressed air pressure: 0.65 MPa Air consumption: 0.3 m³/min Dimensions (L × W × H): 2555 × 1730 × 1800 mm Weight: approx. 600 kg Application: Ideally suited for roofing materials, facade, sheet metal products, sheet metal processing companies, and other manufacturers who require fast, accurate, and safe preparation of sheet metal rolls for transport or storage. If you have any further questions, we will be happy to answer them.

Condition: good (used), axle configuration: 3 axles, first registration: 02/2017, loading space length: 13,650 mm, loading space width: 2,500 mm, loading space height: 2,750 mm, suspension: air, color: grey, Year of construction: 2017, Make axles: Schmitz Cargobull Empty weight: 7.570 kg Carrying capacity: 31.430 kg GVW: 39.000 kg Technical condition: good Visual appearance: good Nwjdpfxjzutgqo Am Usk Please contact Arie or Pedro for more information = Additional options and accessories = - Air suspension - Disc brakes - EBS = Remarks = Schmitz Cargobull SCB*S3T / Coil / Tautliner / Disc Brakes

Condition: good (used), axle configuration: 3 axles, first registration: 02/2017, loading space length: 13,670 mm, loading space width: 2,500 mm, loading space height: 2,800 mm, suspension: air, color: grey, Year of construction: 2017, Make axles: Schmitz Empty weight: 7.590 kg Carrying capacity: 31.410 kg GVW: 39.000 kg Technical condition: good Visual appearance: good Please contact Arie or Pedro for more information = Additional options and accessories = - Air suspension - Disc brakes - EBS Nwedjzutgdjpfx Am Uok = Remarks = Schmitz Cargobull SCB*S3T / Coil / Tautliner / Disc Brakes

Condition: good (used), axle configuration: 3 axles, first registration: 02/2017, loading space length: 13,650 mm, loading space width: 2,500 mm, loading space height: 2,770 mm, suspension: air, color: silver, Year of construction: 2017, Make axles: Schmitz Cargobull Empty weight: 7.590 kg Nwodpfx Amozutf Ts Usk Carrying capacity: 31.410 kg GVW: 39.000 kg Technical condition: good Visual appearance: good Please contact Arie or Pedro for more information = Additional options and accessories = - Air suspension - Disc brakes - EBS = Remarks = Schmitz Cargobull SCB*S3T / Coil / Tautliner / Disc Brakes

Condition: used, axle configuration: 3 axles, first registration: 03/2012, loading space length: 13,610 mm, loading space width: 2,480 mm, loading space height: 2,700 mm, total length: 13,860 mm, total width: 2,550 mm, suspension: air, tire size: 385/65, tire condition: 30 %, wheelbase: 8,960 mm, color: other, Year of construction: 2012, Equipment: ABS, = Additional options and accessories = Nedpfx Amjzulzaj Uswk - Air Suspension - Drum brakes = More information = Axle configuration Tyre size: 385/65 Make axles: Mercedes Tyre profile: 30% Brakes: drum brakes Suspension: air suspension Rear axle 1: Lift axle Weights Empty weight: 7.560 kg Carrying capacity: 33.440 kg GVW: 41.000 kg Identification Registration number: OL-14-PY

Condition: like new (used), Year of construction: 2019, functionality: fully functional, Characteristics: * Storage capacity: ~ 10300 T * Inlet: max. 75 reels/hr * Outlet: max: 25 reels/hr * Channels: 264 * Storage length: ~ 5160 m Njdpfx Asvl Enxjm Uowk * Height: ~ 30 m * 2 receiving robots * 2 reel stacker cranes Description Automated warehouse for storage of (paper) reels with the following characteristics: * Diameter: 500 – 1500 mm * Width: 600 – 2250 mm * Weight: max. 5000 kg

Condition: new, Year of construction: 2026, neu 2026 070235 September 2026, Zwischenv Türkei 4800 € 500 kg 1200 mm 400 mm Nwsdpowirz Sefx Am Ujk 550 mm 300 mm 50 mm 80 mm 0.55 kW 1400 mm 1200 mm 1550 mm 190 kg motorized drive mechanical adjustable coil mandrel with 4 jaws speed control for decoiling speed aswell as acceleration- and deceleration times photoelectric proximity ensor SICK for sag control ALTERNATIVES (prices on request): Version with pneumatic pressure arm Version with brake, without motor, with or withaout pneumatic pressure arm

Condition: used, empty load weight: 7,400 kg, maximum load weight: 28,600 kg, overall weight: 36,000 kg, first registration: 06/2021, loading space length: 13,630 mm, loading space width: 2,480 mm, loading space height: 2,750 mm, loading space volume: 92 m³, suspension: other, color: grey, gearing type: other, driver cabin: other, emission class: none, Equipment: ABS, Kögel Coil Liner with Tarp Nwodpszti Nrjfx Am Uok - Standard tarp - Internal dimensions (L x W x H): 13.63 x 2.48 x 2.76 m - ABS/EBS - Edscha - Lift axle - SAF axles - Tires: 385/65R22.5 Good condition! German vehicle! Export price! Errors and prior sale excepted. All information without guarantee.

Condition: used, axle configuration: 3 axles, first registration: 06/2016, color: other, Year of construction: 2016, Empty weight: 7.045 kg Nodpfxey Ipape Am Uowk Axle 1: left 8 mm right 8 mm Axle 2: left 6 mm right 6 mm Axle 3: left 12 mm right 12 mm