Used Alko Mobil Jet 160 for sale (69)

Condition: new, Year of construction: 2025, AL-KO POWER UNIT® 250 P-BP Intake nozzle: 250 mm Rated motor power: 6.5 kW / 3-phase Voltage: 400 V / 50 Hz Maximum flow rate: 4,900 m³/h Nominal flow rate: 3,534 m³/h Negative pressure: 2,451 Pa Filter area: 22.4 m² Dimensions (L x W x H) in mm: 2,305 x 1,333 x 2,609 Hodpfscdr E Aox Adwofk Briquetting capacity: 30 - 50 kg/h Location: Available at warehouse 54634 Bitburg Subject to prior sale.

Condition: new, Year of construction: 2025, Al-Ko Clean Air Dust Collector Hfedpfxobuvbre Adwek Exhibition piece (no operating hours yet – new) Technical data, Power Unit 250 P Intake nozzle: 250 mm Motor rated power: 6.5 kW / 3-phase Voltage: 400 V / 50 Hz Maximum air flow: 4900 m³ / h Rated air flow: 3524 m³ / h Negative pressure: 2451 Pa Filter area: 22.4 m² Chip collection volume: 2 x 250 L Dimensions (L / W / H) in mm: 2305 x 994 x 2351 Weight: 758 kg Location: available from warehouse 54634 Bitburg

Condition: new, Year of construction: 2025, Technical specifications: ALKO clean air extraction system, mobile type, Model Mobil-Power Unit APU 120, motor power 1.5 kW, suction nozzle diameter = 120 mm, sound-dampened, mobile collection container, 135 liters, manual filter cleaning, dimensions: L = 1,085 mm, W = 650 mm, H = 1,985 mm, volume of dust container: 135 liters, weight: 117 kg, nominal volumetric flow rate (after cleaning): 814 m³/h. Hsdpfx Adjcdy Ndewofk Exhibition model. Available at a special price. Location: In stock at Bitburg warehouse.

Condition: as good as new (ex-display), Year of construction: 2025, Basically a new machine, it was demonstrated at our in-house trade fair (3 days). 5 operating hours. Technical data 300-P Intake nozzle: 300 mm Motor rated power: 7.5 kW / 3-phase Voltage: 400 V / 50 Hz Max. volume flow: 6,000 m³/h Rated volume flow: 5,089 m³/h Negative pressure: 2,280 Pa Filter area: 30 m² Chip collection volume: 3 x 165 L Dimensions (L/W/H) in mm: 2963 x 994 x 2346 Weight: 880 kg Location: Available from warehouse 54634 Bitburg Hedpfx Ajbqachodwofk Immediately available Subject to prior sale.

Condition: new, Year of construction: 2025, Description: IE 3 motor as standard Maximum volume flow up to 8,500 m³/h at the fan Approximately 73 m² filter area, residual dust content after H3 Pre-separator as standard 71 dB (A) at full load (according to DIN EN ISO 11201) Already meets the requirements of prEN 16770 Optional: Models with type-tested rotary valve airlock (FSA) Tested backflow damper Integrated automatic extinguishing system Hfjdpfx Adjcqy I Sjwek Suction nozzle: 350 mm Motor rated power: 11 kW Voltage: 400 V / 50 Hz Maximum volume flow: 8500 m³/h Rated volume flow: 6927 m³/h Negative pressure at Vnenn.: 2765 Pa Filter area: 73 m² Chip collection volume: (net/gross) 3 x 165 L / 3 x 241 L Sound pressure level: 71 dB (A) Dimensions (L x W x H): 3112 x 1058 x 2351 mm Weight: 1074 kg Location: in stock at 54634 Bitburg

Year of construction: 2005, condition: used, Extraction system for removing dust from the ambient air. The motor drives a fan impeller, creating negative pressure. The air is sucked into the machine via the intake manifold and reaches the filter elements. The treated air is then blown out again. Additional title: Workshop dust extraction Nominal flow rate: 1400 m³/h minimum flow rate: 1,108 m³/h Power: 2.2 kW Current: 5 A Voltage: 400 V Frequency: 50 Hz Base construction: on a mobile frame Features: 140 mm intake manifold; air filter (category C el. lt.); asynchronous motor (manufacturer EMGR) Hodpfx Ajzgczhedwsfk

Condition: good (used), Tow hitch, trailer coupling, jaw coupling -Manufacturer: AL-KO, axle braked -Type: B 2000-4 -Brake: Type 3081 A Hfjdpfoyvruljx Adwok -Brake drum: Ø 325 mm Recess Ø 160 mm / Bolt circle Ø 205 mm -Dimensions: see photos -Transport dimensions: 1750/660/H340 mm -Weight: 134 kg

Condition: good (used), construction circular saw, circular saw -Engine power: 2.6 KW -Voltage: 220 volts -Dimensions: 885/670/H810 mm Hodpfxed R N Inj Adwefk -Weight: 42 kg

Condition: good (used), drawbar, drawbar, overrun brake -Drawbar height adjustable -cranked Hodognnbgepfx Adwjfk -with overrun brake -Support load: 100 kg -permissible total weight: 1600 kg -Number: 14x drawbar available -Price: per piece -Own weight: 65 kg

Condition: good (used), Drawbar, drawbar, overrun brake -Height-adjustable drawbar -crooked -with overrun brake -Support load: 100 kg -Maximum permissible total weight: 1000 kg -Number: 12x drawbars available Hjdpfx Asgnna Hsdwofk -Price: per piece -Weight: 40 kg

Condition: new, The AL-KO CLEAN VAC central vacuum units are the ideal solution for direct extraction from handheld processing machines and as central vacuums for cleaning entire workshop or production areas. Wherever high suction power is required or long piping runs need to be bridged, AL-KO CLEAN VAC units are the perfect solution. Applications: - Extraction for handheld processing machines, e.g. in joineries, grinding shops, training workshops - Cleaning vacuuming of floors and machines in workshops, production areas or warehouses - Direct extraction at small diameters such as filling stations, dosing systems, etc. Hfodewwt Aaspfx Adwek Advantages: - High suction power up to 25,000 Pa negative pressure - Perfect plug & play: fully pre-assembled at the factory. Fully operational after connecting power and compressed air - 100% air recirculation via M-class dust filters (residual dust < 0.1 mg/m3) with optional H13/H14 post-filter stage - Attractive appearance and additionally weatherproof - Low-noise operation thanks to sound-insulated and powder-coated housing - Easy handling: set up, connect, immediately ready for operation at the customer’s site

Condition: new, The powerful, mobile welding fume extractors AL-KO CLEAN UNIT F are the ideal solution for extracting welding fumes during manual welding, at automated welding stations, or with welding robots. Function: The welding fumes generated at the welding site are captured via extraction arms and hoods, among other means, and conveyed through a duct to the inlet of the AL-KO CLEAN UNIT F. In a large pre-separation chamber, coarse particles are first separated out. The subsequently arranged filter cartridges of dust class “M” filter out the remaining fine dust particles. During extraction operation, the differential pressure-controlled filter cleaning system removes adhering particles from the filter cartridges. Venturi nozzles on the filter cartridges maximize the cleaning efficiency, ensuring consistently high suction power and a long filter service life. A volumetric flow monitor continuously controls the required suction capacity and issues a warning if the nominal value is undercut. The collected dust is gathered in an easily mobile container. The cleaned air is recirculated into the room via the top of the unit. Applications: - For all welding applications with unalloyed or low-alloyed steel - Usable as extraction at individual welding stations and at duct systems with several extraction points - Extraction at fixed-position hoods and welding tables Advantages: Hodpfx Aswwkvqjdwofk - Consistently high suction power thanks to an efficient fan and long-life cleanable filters - Extremely quiet due to high-performance sound insulation - Suitable for individual welding stations and for connection to duct systems - IE3 motors for high energy efficiency - Wide performance range - Optional accessories for various welding applications

Condition: new, Year of construction: 2025, Extraction nozzle 355 mm Nominal motor rating 15.0 kW / 3 Ph Voltage 400 V / 50 Hz Max. flow rate ca. 10,000 m3/h Nominal flow rate* 7,127 m3/h Vacuum at nominal flow rate 3,000 Pa Filter area 73 m2 Pre-separator Integrated Extinguishing device Integrated Swarf collection capacity (net / gross) 3 x 165 L / 3 x 250 L Hjdpfxsfzbqyj Adwefk Sound pressure level 73 dB(A) Dimensions (L / W / H) in mm 3,130 x 1,058 x 2,351 Weight net 1,040 kg

Condition: as good as new (ex-display), Clean air filter Type: Power Unit 250 P FU Hjdohfmpxepfx Adwsfk Offer type: Demonstration machine Technical data: Motor power: 7.5 kW / 3-phase / 400 V / 50 Hz Intake nozzle diameter: 250 mm Nominal volume flow: 3,534 m3/h Maximum volume flow: 4,900 m3/h Negative pressure at Vnenn: 3,184 Pa Filter area: 22.4 m2 Compressed air cleaning including integrated pre-separator including integrated extinguishing system including inverter for speed control including integrated sound insulation shroud (-4 dB(A)) Chip collection volume: 2 x 250 l Sound pressure level: 71 dB(A) including dust baffle Dimensions L x W x H = 3000 x 1058 x 2361 mm Weight 850 kg

Year of construction: 2019, condition: like new (used), machine/vehicle number: AT4-F 32x16/32x16 - wetterfest, Equipment: cooling unit, - what is the air volume for recirculated air – 8 687 m3 - air volume for fresh air – 2,3 m3/s - cooling capacity – 61 kW - heating capacity – 22 kW Hjdpfx Adoxvdi Sjwefk - is there humidification / dehumidification available NO - what are dimensions of the unit - 5x1,5x2,8 m / 4000 kg

Year of construction: 2026, condition: new, The AL-KO Sanding table AST 1.5 BASIC is the entry-level model for the AL-KO sanding table program. It is certified according to GS-HO-11 and bears the seal "Wood dust tested according to BGI 739-1". It is therefore suitable for manual grinding as well as for machining workpieces with manual work machines. The grinding table is made of galvanized steel sheet. The workpiece support consists of a removable beech wood grate. It is accessible from all 4 sides. So that several people can work at the same time. Thanks to the sturdy, structurally stiffened construction, workpieces with a weight of up to 150 kg can be processed. In order to adjust the work surface of the AL-KO AST 1.5 BASIC to the required working height, it is equipped as standard with a mechanical height adjustment. The height adjustment is done without any tools by adjusting the feet in scaled grid dimensions. In addition, all feet can be adjusted in millimeters according to the respective ground conditions. Hedpfx Adefyadbewefk The extraction trough is optimized in terms of flow technology. Due to the funnel-shaped design of the trough with integrated air duct, the air stream is directed to the intake socket. Depending on the extraction capacity required, the connection to the customer-specific extraction system can be made via a connection piece Ø 140 or Ø 160 mm. The bending of the machining surface on both two longitudinal sides also allows machining of workpieces on the end face The suction grilles are aligned with the flow connection to the suction port and thus guarantee an optimal extraction result. For cleaning work inside the sanding table, the slat grating can be lifted off and the air duct can be removed by loosening a few screws. The sanding table is delivered pre-assembled, only the feet have to be mounted and adjusted to the required working height. Tender specification AST 1.5 BASIC page 2 from 2 Technical data AST 1.5 BASIC: - Intake socket 140/ 160 mm - Required suction performance 1.500 m³/h - Vacuum on socket at 22 m/s 1.000 Pa bei Ø 140 mm 700 Pa bei Ø 160 mm - Working height adjustable 735 – 1.015 mm - Working surface (W x L) 946 x 1.500 mm - Dimension (W x L) 1.000 x 1.600 mm - Weight approx. 73 kg

Condition: excellent (used), Paint mist extraction unit, ALKO spray wall Increased flexibility thanks to extraction technology with a frontal plate system Motor data: 0.75 / 2.1 kW ex/ 400 V / 50 Hz Speed: 950 / 1,420 rpm Hodsy Dpfwepfx Adwsfk Airflow: 3,000 / 6,800 m3/h Dimensions (W/H/D): 1,912 x 1,405 x 943 mm with side panels extended: 2,971 x 1,405 x 1,215 mm Filter surface: 2 m2 Weight: 248 kg Condition: very good

Condition: used, Dimensions (L/W/H) 1400/2000 x1400 x3000 mm Dimensions (L/W/H) 1400/2000 x1400 x3000 mm Hfsdpfovwfu Asx Adwjk 2x 220/1x 180 mm with 14 suction nozzlespneum. slide controlfan dischargevacuum system in compact designwith 12 built-in automatic slide valvesused, good conditionmake ALKOtype FU-2-12-800-70-III-Ano. 910225length 1400 / 2000 mmwidth 1400 mmheight 3000 mm12 x air intake D 180 with slide2 x air intake D 220 without slidecladdingshaking downwith discharge via fancompl. controlair return recirculation exhaust air D approx. 500 mmwith fan 2 pieceseach 0,9 3,0 kW - pole-changing motor1450 / 2800 rage location 97447 Gerolzhofendelivery as-is, free-loadedwithout guarantee and warranty

Condition: used, filterintermediate filter/sparging filtervacuum unitsuitable for container feedingused, good condition,manufactured by  ALKOlength 1400 mmwidth 1400 mmheight 3000 mmsuction- /blow in connecting piece D 2 x 250 mmcoveringwith discharge / fan ca. 2,0 KW D 160 mmair recirculation possiblewith fans 2 piece2 x 2,0 kWdiameter D 250 mmlocated in  97447 Gerolzhofensale in current condition as seen- free on truck - Hedevxa N Depfx Adwsfk