Used Amada 8025 for sale (213)

Condition: excellent (used), Year of construction: 2011, pressure 170 t chamfer lenght 3000 mm distance between columns 2700 mm table width 180 mm table length 3170 mm throat 470 mm stroke 200 mm Number of pressing cylinders 2 Stk. total power requirement 15 kW weight of the machine ca. 12 t dimensions of the machine ca. 4000 x 2000 x 2900 mm This AMADA HFE M2 1703 press brake is in good condition and can be viewed at the seller's premises by appointment. Hjdpjw Efagjfx Aabefn The press brake is sold without tools.

Condition: used, Have we aroused your interest? Then please register on our homepage - we look forward to hearing from you! Your Maschinen Besmann Team We have an Amada Promecam GTH 420 for sale, which was manufactured in France. Due to its size, it also fits into a smaller workshop. Amada Promecam 420 GTH guillotine shears Manufacturer: Amada Type: Promecam 420 GTH Condition: used Cutting length: 2000 mm material thickness: 4mm in steel Backgauge: electric, 750 mm Hodpfx Asw Eiproabsfn Motor power: 5,5 KW Weight: approx. 3300 kg

Condition: used, Year of construction: 2008, Equipment: CE marking, lower tooling, safety light barrier, upper tooling, AMADA HFE2204 Pressbrake Pressforce: 220t Hodpfxsw I Dmco Aabsfn Bending length: 4m Backuage: 4-axis backgauge system Clamping system: Amada

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2002, bending force (max.): 220 t, working width: 4,200 mm, stroke length: 350 mm, installation height: 620 mm, table height: 960 mm, TECHNICAL DETAILS Press Data Press force: 220 t Bending length: 4,200 mm Distance between uprights: 3,760 mm Stroke: 350 mm Hfodpow Dcdtofx Aabon Installation height: 620 mm Table width: 180 mm Table height: 960 mm Approach speed: 100 mm/s Control: AMADA OP 2000 MACHINE DETAILS Connected load: 20 kW Machine weight approx.: 20,000 kg Operating hours: 8,444 h EQUIPMENT Backgauge type B Laser safety set Digital angle measurement system Digipro 2-finger kit Manual support system WILA Modufix system WILA hydraulic unit

Condition: used, Year of construction: 2003, table length 5040 mm table width 1550 mm 12 mm plate weight max. 330 kg travel -x axis 2520 mm travel -z axis 300 mm travel -y axis 1550 mm cutting speed 20 m/min feed speed X/Y/Z 80/80/60 m/min positioning accuracy +-0,01 mm/500 mm mm repeatability +/- 0,005 mm table height 820 mm size of opening 550x1550 mm compressed air 6/20 bar total power requirement 10 kW weight of the machine ca. ca. 6,5 t dimensions of the machine ca. 2,5x5,7x2,3 m Turbo blower replaced at 36,000 hours Compressed air dryer Alphapac 0015 SP Basement flue gas extraction type Vario T 1.5A Hjdpsvxwytsfx Aabefn Air conditioning unit RIEDEL PC 315.21-NE-LAS Laser radiation within class 1 The machine was regularly serviced

Year of construction: 2011, operating hours: 14,272 h, condition: excellent (used), Punching machine AMADA EM2510NT was manufactured in 2011 in France in the factory AMADA. In 2012 started used in Spain. In 2020 started used in Lithuania. And for now is for sale with 14 272 operating hours. This machine can be operate with a punching force of 200 kN. The Punching machine still is in good condition and serviced on time by Amada support company. Included full documentation of inspections. The turret punch is in exelent condition. The machine comes with the software. The Punching machine is still connected and it is possible to test anytime in Vilnius, Lithuania. Please see all photos and video. Specification: Year: 2011 Made in: France Operating time in hours: 14 272 Power on hours: 29 580 Software: icluded Control unit: AMADA AMNC-F Punching force: 20 tons Stations: 45 Tools: No tools Metal length: 2 500 mm. Metal width: 1270 mm. Sheet thickness: 3.2 mm. Metal width repositioning: 5 000 mm. Weight of the workpiece: 150 kg. Dimmensions: L 6080 x W 5120 x H2318 mm Weight: 16 500 kg Location: Vilnius, Lithuania Hjdpolxy Efsfx Aabsfn Possible to test: Yes Any questions welcome.

Year of construction: 2010, condition: ready for operation (used), A CNC turret punching machine Amada and an automatic loading and unloading unit LKI Käldman (Amada) are available. 1) CNC turret punching machine Amada EMZ3610, year of manufacture: 2010, pressing force: 300kN, travel X/Y: 2500mm/1525mm, travel X/Y with repositioning: 5000mm/1525mm, max. material thickness: 4.5mm, max. table load: 160kg. Traversing speed X/Y: 100m/80m/min, axis speed: 128m/min, positioning accuracy: +/-0.1mm. Turret stations 45, auto-index stations: 2xB/2xC, turret speed: 30rpm, stroke rate: 1000 strokes/min, machine weight: approx. 21000kg. 2) Loading and unloading system LKI Käldman (Amada) MP Sheetcat 3015, year of manufacture: 2017, min. sheet dimensions X/Y: 1000mm/300mm, max. sheet dimensions X/Y: 3050mm/1525mm, sheet thickness: 0.8mm-6mm, max. sheet weight per pallet: 3000kg, suction cups: 34, machine dimensions X/Y/Z: approx. 8400mm/3600mm/3100mm. Documentation available. On-site inspection is possible. Hfjdpfx Ajv Rp Tcjaben

Condition: excellent (used), Guillotine shears Amada GPX 630 made in France Manufacturer: Amada Type: GPX 630 Condition: used cutting length max: 3050mm normal steel: 6,35 mm NC backgauge: 1000mm number of hold-downs: 16 housing dimensions: 3750 x 2000 x 1850 mm Hfedpfxew Eipfj Aabjn weight: ~ 6500kg Scope of delivery: guillotine shear Amada GPX 630

Condition: good (used), Year of construction: 1991, Capacity 4 mm, cutting length 2550 mm, mot. back gauge, frontarms with scale, cutting gap adjustment, finger stop, foot pedal, pneumatic back sheet holder Hfjdjq Tqwrjpfx Aabjn

Condition: excellent (used), functionality: fully functional, Year of construction: 2001, control type: CNC control, bending force (max.): 130 t, working width: 3,100 mm, number of axes: 6, Equipment: CE marking, european tool clamping system, lower tooling, safety light barrier, upper tooling, Used Amada HFE 3metre x 130ton cnc pressbrake for sale TYPE HYDRAULIC DOWNSTROKING CAPACITY Hfsdpfxow Ugg Ee Aabon 130 TONS CONTROLLED AXIS Y1, Y2, X, R1 R2 Z1 Z2 MAX BEND LENGTH 3000 MM OPEN HEIGHT 470 YEAR 2001 STROKE LENGTH 200 THROAT DEPTH 420 MOTOR POWER 11 KW FRONT GUARDING MACHINE MOUNTED ERWIN SICK ELECTRONIC SIDE INTERLOCKED FENCING REAR INTERLOCKED FENCING TONNAGE 1300 KN APPROACH SPEED 100 MM/SEC BENDING SPEED 1 – 10 MM/SEC RETURN SPEED 1-100 MM/SEC OIL CAPACITY 110 LITRES WEIGHT 7800 KG BACK GUAGE STROKE (X AXIS) 700 MM/S MAX GUAGE 1000MM

Condition: excellent (used), Year of construction: 2014, operating hours: 7,998 h, machine/vehicle number: 43610191, sheet thickness aluminum (max.): 6 mm, We are offering an Amada EML 3610NT punch laser combination machine for sale. The offered machine is used and in a very good condition. Main features of the machine (overall): - Possibility of combining punching and laser burning - automatic pick-up of details (suction cups for 45kg, small amount of perforation recommended) and exchange of pallets during the operation of the machine Hedpjum R T Sjfx Aabjfn - automatic sheet feeding maximum length 3050x1500 and collection of residues after cutting, possibility of sheet loading during machine operation - automatic bale delivery 1500x400mm (two conveyor belts for details) - turning station with 41 fixed and 4 rotating stations - 3 manually adjustable paws - cutting elements on length 3020x1500 - Laser cutting length 2000x1500 - max. sheet thickness 6mm (due to brush table) - thread function - pneumatic hold-down device Accessories for the machine: - Light barrier - Thread cutting set - Sensor for bale chute - System for chip extraction - Separate lubrication of punching and threading tools - Bending sensors for sheet metal - A conveyor belt that pulls out the punching waste Machine data as of 17.09.2024 - Time of the running machine: 7998 hours - Operating time: 2972 hours - Cutting time: 1196 hours - Working time of the resonator: 6154 hours AMADA EML3610NT - Max. Cutting force: 300 kN - Power (laser efficiency): 4kW (CO2) - Type: EML-NT - No. 43610191 - Model:EML3610NT - Year of manufacture: 2014 November - Total value of the connection to the network: 400V/68.3 kVA - Connected load: 85 kVA - Compressed air connection: 8 bar; 48 m3/h - Width of the guarded area: 30m (max) - Minimum safety distance: 1.36 m - Response time of the machine + total response time of the firewall: 320ms - Stop time: 300 ms - Machine braking distance: 180mm - Weight of the punching/laser machine: 24,000 kg PRIII (reception of finished parts) - Model: PR III 300 L 2P - No.: 2424 - Year of construction: 2013 - Connection to the network: 400/50V/Hz - Max. Power supply: 8.5 kW - Compressed air connection: 6 bar 1000 l/min. - Dimensions and weight of the elements to be collected: Workpiece thickness from 0.5 to 3mm Min.150x150mm max. 2500x1000mm with a weight of no more than 45kg - Machine weight (PRIII): 4600 kg ASIII MP (sheet feeder) - Model: ASIII MP 300 - No.: 2994 - Year of construction: 2015 - Connection to the network: 400/50V/Hz - Max. Power supply: 12kW - Compressed air connection: 6 bar 1000 l/min. - Size of sheets that can be stored: Max. 3000x1500mm Minimum steel thickness 1000x300mm from 0.5 to 8mm Weight of a single sheet no more than 300kg - Machine weight (PRIII): 12 000 kg The price is for the entire machine only. The price does not include Tools, dismantling, transportation and commissioning If you have any further questions, please do not hesitate to contact us. The machine is offered in different sources. If you are interested, please confirm availability.

Condition: excellent (used), Year of construction: 2008, Amada EMK 3510NT electric punch, 45 Station Turret with 4 Auto indexing units 2008 Year of manufacture Country of Manufacture: Japan Bridge Type 30 tonnes (196kN) High speed AC servo direct twin drive 1270 x 2500mm 1270 x 5000mm ( ONE REPOSITION) 34.5 mm mild steel Hfjdpfx Aaow Dc Dysbon 150Kg max sheet weight mm 58 Stations Turret Turret Stations: 36 x A (Max. Dia. 12.7mm) 12 x B (Max. Dia. 31.7mm) 4 x C (Max. Dia. 50.8mm) 2 x D (Max. Dia. 88.9mm) Auto Indexing Stations 2 x B (Max Dia 31.7mm) 2 x E (Max. Dia. 114.3mm)

Year of construction: 1998, condition: ready for operation (used), Travel X/Y/Z: 2520mm/1550mm/300mm, max. sheet dimensions X/Y: 5040mm/1550mm, max. material thickness mild steel/stainless steel/aluminum: 12mm/6mm/3mm, max. workpiece weight: 330kg, positioning speed: 80m/min/80m/min/60mm/min, positioning accuracy: +/-0.01mm. Machine dimensions X/Y/Z: approx. 5650mm/3650mm/2100mm, weight: approx. 6600kg, operating hours: 29499h. Including Fanuc Laser-Model C1500. Documentation available. On-site inspection is possible. Hodpfx Aev Ip R Ajabsfn

Condition: ready for operation (used), Year of construction: 2019, Movement X-Axis Movement 3070 mm Y-Axis Movement 1550 mm Table Table load 920 kg Max Material Thickness Steel 25 mm Stainless steel 25 mm Aluminium 25 mm Hsdewvb E Tspfx Aabofn This AMADA ENSIS-3015 AJ was manufactured in 2019. A fiber laser cutting machine, it represents a reliable option for precise cutting tasks. Consider the opportunity to buy this AMADA ENSIS-3015 AJ fiber laser cutting machine. Contact us for more information. Application Types Cutting

Condition: not inspected (used), Year of construction: 2000, functionality: unexamined, machine/vehicle number: 44650046, saw band length: 4,570 mm, saw band width: 41 mm, cutting height (max.): 400 mm, saw band speed: 1,500 mm/s, No minimum price – guaranteed sale to the highest bidder! Placing a bid obliges collection within the period from 28.07.2025 to 31.07.2025. TECHNICAL DETAILS Cutting capacity round material: Ø 406 mm Cutting capacity square material width: 400 mm Cutting capacity square material height: 400 mm Maximum machine load capacity: 2,500 kg Maximum roller conveyor load capacity: 2,000 kg/m Min. workpiece remnant length ensuring clamping edge: 76 mm Min. workpiece remnant length without workpiece detection: 30 mm Hedpfewvhxaox Aabofn Saw blade dimensions: 41 x 1.3 x 4,570 mm Cutting speeds: 15 to 90 m/min (50 Hz) Cutting speeds: 17 to 90 m/min (60 Hz) Clamping device pressure adjustment: 570 – 1750 N Cut-off length: 10 to 5,040 mm Increments: 0.1 mm Single feed: 570 mm MACHINE DETAILS Installation dimensions: 5,200 x 2,350 x 2,000 mm Weight: 2,950 kg Saw drive motor: 5.5 kW, 4 pole Hydraulic pump motor: 1.5 kW, 4 pole Coolant pump motor: 0.18 kW, 2 pole Connected load: 12.3 kVA Machine dimensions length: 3,006.5 mm Machine dimensions width: 3,288 mm Machine dimensions height: 2,564 mm Working height: 842 mm Hydraulic oil tank: 40 litres Cutting fluid tank: 120 litres EQUIPMENT - With technical documentation - Additional roller conveyor - Support length: approx. 2,000 mm - Total support length: approx. 5,040 mm

Condition: used, Year of construction: 1998, machine/vehicle number: 100057, 1998 AMADA VIPROS 2510 KING The punching machine is in good condition, always serviced on time by Amada service. All documentation is included. This machine can be operated with a punching force of 196 kN. Made in Japan. The punching machine is still under power and can be tested at any time in Vilnius, Lithuania. Specification: Hfodpfx Aem Ncayjabsn Model: AMADA VIPROS 2510K Serial no: 100057 Year: 1998 Made in: Japan Punching force: 20 tons Stations: 31 Tools: included (RO 6; RO 6,5; RO 3; RE 30x5; RE 25x5; RE 80x5; RO 5; RO 3,5; RE 10x3; RE 10x5; RE 50x5; RE 8x12) Maximum sheet thickness: 3 mm X-axis movement: 2500 mm Y axis travel: 1270 mm Weight: 11 000 kg Location: Vilnius, Lithuania Testable: Yes If you have any questions, please do not hesitate to contact us.

Condition: used, Year of construction: 2011, The Amada HFE m2 2204 is a modern and sophisticated sheet metal processing machine specifically designed for the requirements of industrial manufacturing. It combines precise control technology with a user-friendly interface to enable efficient and more accurate processing of sheet metal materials. Key Features: Hedpfjvyq Uyjx Aabsfn - Hydraulic pressing force: With a pressing force of up to 220 tons, the HFE m2 2204 offers the performance required for demanding applications. - Versatility: The machine is capable of processing a wide range of materials, including steel, stainless steel and aluminum, making it suitable for different manufacturing processes. - Precision: Thanks to advanced technologies, the HFE m2 2204 ensures high dimensional accuracy and repeatability, resulting in minimal scrap rates. - User-friendly control: With an intuitive control panel and advanced software, the machine allows easy programming and adaptation to different production requirements. - Safety features: The HFE m2 2204 is equipped with various safety features that ensure the protection of the operator and the safe operation of the machine. Overall, the Amada HFE m2 2204 is a reliable choice for companies that need a powerful and precise sheet metal processing solution. Its advanced features and ability to customize make it a valuable investment in modern manufacturing processes. Ink. Tool Pressing force: 2,200 KN Folding: 4280 mm table width: 180 mm distance between the posts: 3760 mm Throat: 420 mm opening: 470 mm stroke: 200 mm working height: 960 mm amount of oil: 160 L. connected load: 20 kW approach speed: 100 mm / s Maximum bending speed: 10 mm / s return speed: 100 mm / s total length (L): 5655 mm total width (B): 2620 mm total height (H): 3080 mm Total weight: 17t operating hours: 5500 Total weight: 17t return speed: 100 mm / s total length (L): 5655 mm total width (B): 2620 mm total height (H): 3080 mm table width: 180 mm distance between the posts: 3760 mm Throat: 420 mm opening: 470 mm stroke: 200 mm working height: 960 mm amount of oil: 160 L. connected load: 20 kW approach speed: 100 mm / s Maximum bending speed: 10 mm / s

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2004, operating hours: 30,629 h, laser power: 4,000 W, travel distance X-axis: 3,070 mm, travel distance Y-axis: 1,550 mm, travel distance Z-axis: 200 mm, product height (max.): 20 mm, Laser cutting machine including paternoster! Machine serviced by manufacturer in 2023! LASER CUTTING MACHINE TECHNICAL DETAILS Laser Laser power: 4,000 W Peak power: 500 W Laser source: FANUC AF 4000 E Principle: c2-laser (AC-HF) Laser wavelength: 10.6 µm Laser stability: +/- 1 % Laser consumption: approx. 10 l/h Travel Range and Cutting Parameters X-axis travel: 3,070 mm Y-axis travel: 1,550 mm Z-axis travel: 200 mm Table load: 850 kg Material thickness (mild steel ST 1203): 20 mm Cutting speed: 0 to 20 m/min X-axis travel speed: 80 m/min Y-axis travel speed: 80 m/min Simultaneous axis: 113 m/min Z-axis travel speed: 60 m/min Control system: GE Fanuc Series 160 I-LW MACHINE DETAILS Operating hours: 30,629 h Dimensions & Weight Dimensions: 8,000 x 3,400 x 2,400 mm Weight: 16,000 kg EQUIPMENT Documentation/manual Cooling unit Safety light barrier Dry separator Keller L-CUT Transformer RIEDEL PC 315.21-ME LAS PATERNOSTER TECHNICAL DETAILS Maximum sheet weight: 3,000 kg Sheet thickness: 1 to 20 mm Maximum sheet size: 3,000 x 1,500 mm Minimum sheet size: 150 x 150 mm Lifting traverse load capacity: 3,000 kg MACHINE DETAILS Dimensions & Weight Dimensions: approx. 6,400 x 5,000 x 8,000 mm Weight: approx. 8,000 kg EQUIPMENT Hfjdpfxjw H R H Uo Aaben Loading bay Unloading platform Lifting traverse Pallet changer Vacuum traverse

Year of construction: 2007, condition: ready for operation (used), An Amada CNC turret punching machine for medium format sheets including an MP300 M loading unit, Wilson X-Sharp grinding machine and numerous standard and special punching tools are available. 1) CNC turret punching machine Amada, year of manufacture: 2007, punching force: 300kN, max. sheet dimensions X/Y: 3000mm/1500mm, max. sheet thickness: 6.35mm, stroke rate: 600 strokes/min, simultaneous positioning speed: 128m/min, repeat accuracy: +/-0.1mm, machine dimensions X/Y/Z: approx. 5100mm/3200mm/2300mm, weight: approx. 18000kg. 2) Automatic sheet loading and unloading system Amada MP 300 M, max. sheet dimensions X/Y: 3000mm/1500mm, min. sheet dimensions X/Y: 1000mm/300mm, sheet thickness range: 0.8mm-6mm, max. load capacity per pallet: 3000kg, max. stacking height: 400mm, max. sheet weight: 170kg, max. pallets: 9, pallet change time: 25s, sheet loading time: 18s, weight: approx. 4900kg. 3) Wilson X-Sharp tool grinding machine. Documentation available. On-site inspection is possible. Hsdpfxewhp N De Aabjfn

Condition: good (used), functionality: fully functional, Year of construction: 1992, operating hours: 7,906 h, machine/vehicle number: H21025, control type: manual, bending force (max.): 170 t, overall weight: 12,500 kg, We are selling a press brake EX-SBB Hfsdpew Im U Aofx Aabsn

Condition: excellent (used), Year of construction: 2000, Technical data: Hodpfx Aet Upp Uoabjfn Working length: 4100 mm Stand width: 3650 mm Pressing force: 170 to CNC control: OPERATOR II grafic controlled axes: Y1/Y2; X1/X2; R1/R2;, Z1/Z2 motorized adjustable back gauge throat depth: 300 mm stroke: 200 mm crowning Working height: 960 mm Motor power: 13 kW Dimensions (length x width x height): approx. 4500 x 2200 x 2900 mm Weight: approx. 14 tons Accessories: 1 set of tools The seller is not liable for typing or data transmission errors. The machine's appearance, technology and wear correspond to its age; used machines are sold without any warranty.

Condition: repair required (used), Manufacturer: Amada Type: 5020 Year of construction: 1990, Number of axles: 3 Pressing force: 50t Bending length: 2000mm Sold without prisms, Hfjdpfx Asv Umm Ijaben The machine works, moves, Error: End position of the Y-axis must be repaired. Height adjustment is missing,

Condition: ready for operation (used), Year of construction: 1997, functionality: fully functional, machine/vehicle number: 5820387, punching force: 30 t, sheet thickness steel (max.): 8 mm, working range: 3,000 mm, travel distance X-axis: 2,500 mm, CNC punching machine with fully automatic loading system TECHNICAL DETAILS Control: CNC AMADAN 04 P-C Automation & Safety Loading system: LKI L III 250 automatic loader Unloading system: PR III automatic unloader Sorting: Automatic part sorting on pallets possible Noise protection: Noise protection hood Safety equipment: SICK photoelectric sensors, original safety fences Processing capacity Punching force: 30 t Max. material thickness (steel): 8 mm Working area: 3,000 mm X-axis travel: 2,500 mm Table system Table type: Brush table for quiet operation and scratch-free processing Repositioning: Automatic sheet repositioning Tool lubrication: Air Blow automatic lubrication Punching Pneumatic punches: 2 pieces MACHINE DETAILS Power supply: Three-phase Overall length: 15,000 mm Total width: 5,000 mm Total height: 2,000 mm Punching machine weight: 16 t Loader weight: 2.3 t EQUIPMENT - Automatic loader LKI L III 250, built in 2011 - Automatic unloader PR III - Noise protection hood - SICK photoelectric sensors - Original safety fences - Brush table - Automatic sheet repositioning - Air blow lubrication - Two pneumatic punches Further technical details according to the manufacturer - without guarantee Ram stroke: 31.9 mm Max. hole diameter: 114.3 mm Punching frequency (X/Y direction) Stroke length: 8.0 mm – Pitch: 25.4 mm – Stroke frequency: 300 / 375 strokes/min Stroke length: 4.5 mm – Pitch: 25.4 mm – Stroke rate: 375 / 375 strokes/min Stroke length: 4.5 mm – Pitch: 2.0 mm – Stroke rate: 600 / 600 strokes/min Tool turret Tool type: Amada Thick Turret Turret speed: 25 rpm Turret capacity: 58 stations (4 of which are auto-indexable) Accuracies Punching accuracy: ± 0.10 mm Positioning accuracy: ± 0.025 mm Repeat accuracy: ± 0.025 mm Hodpewc S R Hsfx Aabefn

Year of construction: 2009, condition: ready for operation (used), A CNC CO2 laser cutting machine Amada with automated storage system LKI is available. 1) Laser power: 4kW (4000W), travel X/Y/Z: 3100mm/1550mm/100mm, max. table load: 920kg, max. material thickness steel/stainless steel/aluminum: 20mm/12mm/10mm, laser system dimensions X/Y/Z: approx. 10000mm/4300mm/2100mm, weight: approx. 11000kg. 2) Pallets: 8, cutting pallets: 2, raw material: 2/3, unloading: 4/3, max. unloading height: 2200mm, max. material dimensions X/Y: 3050mm/1525mm, min. sheet dimensions: 2000mm/1000mm, height: 5400mm. Documentation available. On-site inspection is possible. Hfjdpfxsv Rp S So Aabsn

Year of construction: 1995, condition: ready for operation (used), A Promecam (Amada) APX 103 CNC press brake is available. Pressing force: 1000kN, working width: 3000mm, column distance: 2550mm, gap opening: 370mm, stroke: 100mm, column depth: 400mm, infeed speed: 70mm/s, bending speed: 9mm/s, return speed: 85mm/s, drive power: 10.5kW. Machine dimensions X/Y/Z: approx. 3500mm/2200mm/2300mm, weight: approx. 6400kg, control: Amada Operator, operating hours: 36261h. The press is still in operation, therefore the operating hours change continuously. Documentation available. On-site inspection is possible. Hfodpfxowm Nn Re Aabon