Used Assembly Table for sale (40,287)

Condition: new, table height: 800messurements (LxWxH): 1400 x 900 x 800table width: 900table length: 1400weight approx.: 235 Special workbench systems from the SST, SFT and SWT fix series as 3D clamping workstations for the rational manufacture of assembly, welding and adhesive structures, e.g. Devices, railings, frames etc. With the help of the extensive range of clamping devices (see catalog section welding table accessories) these table systems can also be used as flexibly upgradable devices and thus enable high-quality production of small and medium-sized series. The special worktables have a 16 mm (dual standard) or 25 mm (triple 24 + 1) worktop, which is provided with a Ø28 mm hole pattern. In addition, the table top has a 100 x 100 mm grid marking for easy alignment of workpieces or devices. The table perforation allows the use of a wide variety of clamping elements and fixing aids. For special applications, deviating from the standard, the table top surface can optionally be equipped in stainless steel 1.4301, aluminum, plastic or even high-strength materials ST70. Due to the fully screwed construction of the clamping plate, the work surface can be replaced inexpensively in the event of later wear. As a result, the table system remains particularly sustainable. Table 1 below gives an overview of the available standard models. Dedpfx Adofk Aitjdewf For more information, follow the link:

Condition: ready for operation (used), Union boring mill BFK 130/1 x-axis 3500 mm y-axis 2000 mm Dwodpsxx Ny Uefx Addef z-axis 1250 mm table surface area 1600 x 2000 mm movable table load 12.5 t tool taper SK50 Angle heads 0° - 180° Weight approx. 35 t Milling heads Face plate

Condition: good (used), Robland NZ3800 format saw with a trolley Scorer on a separate engine, 380cm trolley length 0-45 tilt electrically adjustable with readout Dsdpfx Adevyixwjdewf up-down saw electrically adjustable culaga on the right side motorically adjustable, i.e. we enter the dimension and it is set, max 1520mm 5.5KW main engine 3 cutting speeds A branded machine, technically fully functional, will still fulfill its functions well

Condition: good (used), Year of construction: 2011, functionality: fully functional, machine/vehicle number: 34205, total width: 4,100 mm, total length: 12,195 mm, cutting length (max.): 3,700 mm, We are selling our fully functional Hegla ProLam 37. Special features: Traveren – rotation device Support arms = 4 units for Low E glass, reinforced version Technical specifications: Film thickness: 0.38 mm to 3.8 mm Maximum cutting height: 2 x 3 mm to 2 x 8 mm Maximum glass size: up to 3,750 mm Year of manufacture: ProLam 37 (2011) Dwedpsxqc U Asfx Addjf Brand: HEGLA The machine is still in operation and can be inspected on site at any time. Additionally, we have an EcoLam 60 available for sale, which we would include for an additional €10,000.

Year of construction: 2022, condition: excellent (used), functionality: fully functional, Bakery and confectionery work table. Stainless steel with granite worktop. Reinforced welded construction. Storage shelf on the left, open on the bottom right. Stainless steel design. Approx. dimensions: 3000 x 800 x 890 mm (W x D x H). Used device, cleaned. We have many more top-quality tables in stock! Dwjdpswv E Niefx Addjf

Condition: like new (used), Year of construction: 2025, For sale: Hammer K2M3 table saw with an 800 mm cutting length. The machine has a minor transport damage and is in like-new condition. Technical specifications: - Cutting length: 800 mm - Cutting width: 600 mm - Cutting height: 80 mm - Height adjustable and tiltable - Extractable (Ø 100 mm) - Motor power: 1.9 kW - Year of manufacture: 2025 - Minor transport damage Dwjdpfx Aexxr N Esddjf The circular saw is located at A-5431 Kuchl and can be inspected at any time during our business hours. Subject to prior sale! Related terms: saw, circular saw, Hammer Reference: R-A0117

Condition: new, table height: 650 - 1050messurements (LxWxH): 1950 x 950 x 650 bis 1050table width: 950table length: 1950weight approx.: 475This enables the user to flexibly adjust the height of the work surface to the respective requirements in order to improve economy and ergonomics. The standard height adjustment is carried out by manual hydraulics in the range of 650 - 1050 mm (higher or lower on request). Like the SST fix series, the worktop also has a 100 x100mm Ø 28 grid. Used in combination with processing machines, testing or post-processing devices (deburring, marking, testing to the height of the clamping table of the machine can be adjusted. The table systems can be easily changed by means of a lifting truck. These portable systems, with the different fastening and securing options for the maintenance of injection molding and die-casting tools have already been proven. After removal from the machine, the tools can be safely serviced on site and taken for repairs for maintenance Table 2 below gives an overview of the available standard models. For more information please follow this link: Dwodpfx Ajfk E D Aeddsf

Condition: ready for operation (used), controller manufacturer: Siemens, empty load weight: 55,000 kg, 2-koloms portaalfreesmachine tussen de kolommen: 2550 mm!! 5-assige freeskop koeling door spindel totaal vermogen: 90 kVa Longitudinal travel X-axe: 8000 mm Cross travel Y-axe: 2500 mm Dwodpfx Adjv Sfkasdjf Travel Z-axe: 800 mm Dimensions clamping space- table: 9000 x 2500 mm Max height workpiece: 1200 mm Power on spindle: 20 kW Power needed (KVA): 90 ACCESSORIES & TOOLING: toolchanger - 28 toolpositions

Condition: good (used), Workbench, work table, assembly bench, assembly table, worktable, mobile workbench, sewing machine table -Work table: Electrically height-adjustable work table, solid construction with casters Djdpfx Adexy Ikusdowf -Tabletop: 1400 x 700 mm -Height: 810 to 1180 mm -Drive motor: Baifu 51K120GU-CM-P 230V 120W -Base: 4 swivel casters with locking brakes -Transport dimensions: 1400/700/H810 mm -Weight: 62 kg

Condition: good (used), Year of construction: 1997, Under-table cross-cut saw max. cutting width: 800 mm max. cutting height: approx. 150 mm Dwodpfxextwk Dj Addof saw blade: 550 mm with 2 roller conveyors, the right one with stop and measuring scale

Condition: used, Year of construction: 2009, total length: 1,200 mm, total width: 800 mm, Manufacturer : VDI Dwedpfx Aox Akaqeddjf Type: Accumulation table Year : 2009 Automatic unit counting / detection system. Belt width : 20 cm Plate size : 80 x 120 cm    

Condition: new, Year of construction: 2024, load capacity: 300 kg, Welding turntable KT 300 Horizontal load 300 KG, tilted 150 KG Power consumption 220V, 50 Hz Djdpfsc Ug Tljx Addewf Table diameter 450mm Height 500mm Infinitely variable tilt range via crank gear motor 0 - 90° Speed 0.3 to 2.5 rpm Incl. foot remote control Surcharge: Quick-release jaw chuck Diameter 300mm, 450.-€

Condition: new, table height: 650 - 1050messurements (LxWxH): 1450 x 950 x 650 bis 1050table width: 950table length: 1450weight approx.: 308This enables the user to flexibly adjust the height of the work surface to the respective requirements in order to improve economy and ergonomics. The standard height adjustment is carried out by manual hydraulics in the range of 650 - 1050 mm (higher or lower on request). Like the SST fix series, the worktop also has a 100 x100mm Ø 28 grid. Used in combination with processing machines, testing or post-processing devices (deburring, marking, testing to the height of the clamping table of the machine can be adjusted. The table systems can be easily changed by means of a lifting truck. These portable systems, with the different fastening and securing options for the maintenance of injection molding and die-casting tools have already been proven. After removal from the machine, the tools can be safely serviced on site and taken for repairs for maintenance Table 2 below gives an overview of the available standard models. Dsdpfx Asgrvv Toddswf For more information please follow this link:

Year of construction: 2010, condition: ready for operation (used), Drilling unit / profile drilling machine Alzmetall AC32, drill head. The maintenance work includes: new disc spring set in the drill head (11/2025), new servo motor for speed adjustment (09/2025), new disc set for shaft 2 (approx. 09/2023) and a complete belt replacement (11/2024). Note: V ribbed belt is 1.4mm before the wear limit. Inspection by appointment possible. Dedpfxjx Ecvcj Addjwf

Condition: ready for operation (used), functionality: fully functional, rotational speed (max.): 13,555 rpm, rotational speed (min.): 2,987 rpm, power: 710 kW (965.33 HP), High-capacity HV Turbo KA22S/7388 centrifugal oxidation air compressor, complete with ELIN 710 kW electric motor and installed inside an acoustic enclosure with two top-mounted cooling fans. This unit is designed for FGD (Flue Gas Desulfurization) oxidation, supplying high-pressure process air for SO₂ → SO₃ conversion in wet scrubbers. Manufactured in 2007, removed from a power plant in Elektrėnai (LT). Robust industrial reliability and high efficiency for continuous 24/7 duty. Dwsdpfjxy If Ssx Addjf Compressor Model: HV Turbo KA22S/7388 Type: Single-stage centrifugal process air compressor Year: 2007 Flow rate: 21,500 Nm³/h Pressure rise (Δp): 105 kPa Inlet pressure: 1.013 bar Discharge pressure: 2.063 bar Nominal speed: 2987 rpm Max speed: 13,555 rpm Max inlet temperature: 30 °C Cooling: Air + oil lubrication system (visible in photos) Installation: Acoustic cabin with integrated ventilation Motor Brand: ELIN Power: 710 kW Coupling: Direct drive through HV Turbo gearbox Cooling: Air-cooled (large finned housing visible) General Condition: In working order before shutdown Enclosure: Full acoustic housing “OxoK-7” Includes: Control cabinet OxOK-7 with HMI Danfoss instrumentation Acoustic silencing structure Lubrication systems All equipment visible in photos

Condition: used, Technical data: Max. saw blade diameter: 400 mm Min. saw blade diameter: 250 mm Scoring unit and main saw on a single motor Scoring blade diameter: 120 mm Manual saw blade height adjustment Tilting saw blade from 0° to 45° Manual blade tilt adjustment Carriage length: 3200 mm Carriage lock Work table: 1200 mm Fence: 1100 mm Ruler, 3400 mm long, with 2 stops Guard Djdpfxsxz Dm Us Addowf Emergency stop switch Power supply: 400 V Main motor power: 7.5 kW Overall dimensions: Length: 3300 mm Width: 5500 mm Height: 1400 mm

Condition: used, Year of construction: 2018, 5.5 kW main motor, frequency converter (2000-6000 rpm), motorized 2-axis scoring unit with its own drive. Motorized height adjustment in 0.1 mm increments. Motorized angle adjustment in 0.1° increments with digital display. 1090 x 630 mm miter gauge. Narrow and wide extraction hoods with quick-change function. Clamping shoe, sliding block, and manual quick-release clamp. Sliding carriage length 2150 mm (cutting length 2170 mm) - Quick-Scoring equipment packages - Scoring unit adjustable without tools from 2.8 to 3.6 mm - Miter gauge +45° - 45° - On/off switch on the sliding carriage. Dwedpfovvkm Uex Addjf Storage location: Nattheim

Condition: used, Jaw chuck different versions Dedpfx Adjb I Sdxjdowf from 300mm to 500mm

Condition: new, table height: 650 - 1050messurements (LxWxH): 1400 x 900 x 650 bis 1050table width: 900table length: 1400weight approx.: 305This enables the user to flexibly adjust the height of the work surface to the respective requirements in order to improve economy and ergonomics. The standard height adjustment is carried out by manual hydraulics in the range of 650 - 1050 mm (higher or lower on request). Like the SST fix series, the worktop also has a 100 x100mm Ø 28 grid. Used in combination with processing machines, testing or post-processing devices (deburring, marking, testing to the height of the clamping table of the machine can be adjusted. The table systems can be easily changed by means of a lifting truck. These portable systems, with the different fastening and securing options for the maintenance of injection molding and die-casting tools have already been proven. After removal from the machine, the tools can be safely serviced on site and taken for repairs for maintenance Table 2 below gives an overview of the available standard models. Djdpfogrvwbjx Addjwf For more information please follow this link:

Condition: ready for operation (used), Year of construction: 2005, functionality: fully functional, cutting length (max.): 3,300 mm, cutting width at rip fence: 1,650 mm, Equipment: scorer, Top of the line precision tablesaw with fully digital rip fence and crosscut fence. Packaged and ready for shipping! Dwedpfoxz Dl Rex Addsf

Year of construction: 2019, condition: used, General Information: The MobyLift is a handy tool for ergonomically lifting, transporting, and setting up products such as doors, tabletops, and other panels. From a work-related perspective, the MobyLift is a responsible investment. It is easy to use, reduces the number of damaged products, increases productivity, prevents back pain, and thus reduces work absence. The MobyLift was developed in collaboration with reputable assembly companies, combining their knowledge and experience with our know-how to create a practical tool. The MobyLift MC-120-H consists of the following modules: · Mobile base · Electric lifting and tilting system · Automatic vacuum control · Wireless electric operation. The MobyLift MC-120-H is designed so that it can be quickly and easily disassembled into a number of portable modules after being switched off. This makes it very convenient to load and unload the MobyLift or to move it to another floor or building. The MC-120-H is supplied with a 24 V battery charger for the electric lifting and tilting system and is equipped with a charge level indicator to continuously monitor the battery status. Specifications: - Lifting capacity: 120 kg - Lifting height: 100 cm, electrically operated - Tilt angle, front - rear: 37°, electrically operated - Swivel angle of the head joint on both sides: 90° - Rotation angle of the head joint: 360°, continuous - Side shift: 7 cm - Weight: 150 kg, can be disassembled into modules Dwsdpsv Dauwsfx Addef Storage location: Nattheim

Year of construction: 2022, condition: as good as new (ex-display), Welding rotary table Protec KT 1200 Kg Motor infinitely variable swivel and speed adjustable Motor 0,75 KW with remote control Foot switch Table diameter 1200mm Dodpfx Adjcrmyfodewf height 1000mm length 1400mm width 1500mm Speed from 0,05 to 0,5 rpm

Condition: new, table height: 800messurements (LxWxH): 1480 x 1480 x 800table width: 1480table length: 1480weight approx.: 602This enables the user to flexibly adjust the height of the work surface to the respective requirements in order to improve economy and ergonomics. The standard height adjustment is carried out by manual hydraulics in the range of 650 - 1050 mm (higher or lower on request). Like the SST fix series, the worktop also has a 100 x100mm Ø 28 grid. Used in combination with processing machines, testing or post-processing devices (deburring, marking, testing to the height of the clamping table of the machine can be adjusted. The table systems can be easily changed by means of a lifting truck. These portable systems, with the different fastening and securing options for the maintenance of injection molding and die-casting tools have already been proven. After removal from the machine, the tools can be safely serviced on site and taken for repairs for maintenance Table 2 below gives an overview of the available standard models. Dwsdpfx Adjgrz Ttsdef For more information please follow this link:

Condition: used, Year of construction: 1991, Eye-level control panel, Aigner integral stop including feed with sliding carriage (without stop ruler), milling stop with digital display and swivel mechanism Storage location: Nattheim Dwedpsv Ai N Uefx Addef

Condition: new, table height: 800messurements (LxWxH): 1480 x 1480 x 800table width: 1480table length: 1480weight approx.: 469 Special workbench systems from the SST, SFT and SWT fix series as 3D clamping workstations for the rational manufacture of assembly, welding and adhesive structures, e.g. Devices, railings, frames etc. With the help of the extensive range of clamping devices (see catalog section welding table accessories) these table systems can also be used as flexibly upgradable devices and thus enable high-quality production of small and medium-sized series. The special worktables have a 16 mm (dual standard) or 25 mm (triple 24 + 1) worktop, which is provided with a Ø28 mm hole pattern. In addition, the table top has a 100 x 100 mm grid marking for easy alignment of workpieces or devices. The table perforation allows the use of a wide variety of clamping elements and fixing aids. For special applications, deviating from the standard, the table top surface can optionally be equipped in stainless steel 1.4301, aluminum, plastic or even high-strength materials ST70. Due to the fully screwed construction of the clamping plate, the work surface can be replaced inexpensively in the event of later wear. As a result, the table system remains particularly sustainable. Table 1 below gives an overview of the available standard models. Dsdegrz Twjpfx Addjwf For more information, follow the link: