Used Assembly Table for sale (19,983)

Condition: new, More technical data on request Redpfod Aca Dex Airjch

Year of construction: 2021, condition: used, functionality: fully functional, EV Car Stator Assembly Line (2021) Designed to produce stators with a height range of 100–210 mm and a diameter of 160 mm Including manual, semi-automated, and fully automated operations Cycle time: 86 s Stations and Equipment End Plate Sub-assembly (Gluing) End plate Loctite gluing onto metal sheet stack and laser marking Grob semi-automated assembly machine (2021) Keyence laser Stator Stack Preparation Stator stack preparation (loading) and height measurement 7 metal sheet stacks with a height of 25 mm loaded on a rotating table Slot Insulator Insertion U-shaped paper insulator insertion Grob automated assembly machine (2021) Insertion of 48 “U”-shaped paper insulators 3x Winding Stations 3x copper wire winding stations, wire fed from barrels Grob automated assembly machines (2021) Redpfx Aozc N Axeirsch Maximum number of wires: 15 Insulation Tube Assembly and Cutting 6 manual stations for insulation tube assembly 1 cutting station connected via conveyor 2x Wire Pre-forming 2 automated wire pre-shaping stations 2T Kistler press Phase Separator Assembly 6 manual phase separator assembly stations between coil assembly stations, connected via conveyor 1 rotating station for stator cradle rotation 8x Stator Hot Crimping Preparation 8 manual stations for stator hot crimping preparation 2x Connector Hot Crimping 2 electric welding machines with force and current measurement Lingl PZ5 welding machines (2021) 10x Final Forming Preparation 10 manual stator final forming preparation stations Final Wire Forming Wire shaping using a 2T Kistler press 2x Lancing 2 Grob automated stator lancing machines (2021) Lancing for stator heights of 140 mm and 210 mm Phase Separator Cutting Station Teknomatik semi-automated stator lifting and pre-cutting machine Stator Stack Skewing and Laser Welding Automated skewing, laser welding, and laser marking KUKA robot KR 250 R2700-2/FLR (2021) TRUMPF TruDisk 4002 welding laser (2021) End-of-Line (EOL) Electrical Measurement Semi-automated stations for high- and low-voltage testing ETL ATS 400 automatic test system ZAW resistance measurement tester (2023) Heat Shrink Tube Assembly Prospertech semi-automated stations for heat shrink tube placement on wires Stator Resin Impregnation Automated Tecnofirma resin application and heating process Includes: 1x induction heating zone 1x pre-heating zone 5x impregnation zones 2x infrared lamp zones 1x gelation zone 1x curing zone Integrated Minimax firefighting system KUKA robot KR 150 R2700-2/FLR (2021)

Year of construction: 2021, condition: used, functionality: fully functional, EV Car Rotor Assembly Line (2021) Designed to produce rotors in the height range 300–460 mm Including manual, semi‑automated, and automated operations Cycle time: 86 s Manufacturer: TeamTechnic (Nextomation) Stations and Equipment Rotor package and shaft loading, shrinking, and cooling KUKA KR120 R3900‑2K/FLR robot (2021) with camera system 3x semi‑automated material infeed for rotors (high and low versions) 3x semi‑automated material infeed for metal sheet packages Automated sheet‑metal package heating and shaft insertion Rotary table with 6 heating stations, up to 300 °C Rotor pressing, locking, and laser marking Automated pressing with 10 T Kistler press and package locking using a Bosch 4GE 59 screwdriver (90 Nm) Laser marking with Arex 420 laser Resin application and large magnet assembly Manual magnet belt feeding on trays Automated large magnet insertion and sealing Scheugenpflug LiquiPrep LP 804 resin dispensing unit Resin application and small magnet assembly Manual magnet belt feeding on trays Automated small magnet insertion and sealing Scheugenpflug LiquiPrep LP 804 resin dispensing unit Resin gelling and curing Automated operation for 150 pcs at 200 °C WPC tooling preparation station Press plate cleaning station Package unlocking, resin level, and magnet position control Automated assembly tool removal with a Bosch 5DMC530 screwdriver (90 Nm) Resin level and magnet position control Balancing Automated balancing with pin insertion and verification KUKA KR120 R3100‑2/FLR robot (2021) 2x Schenk eTeno balancing machines (2021) 2x 1.5 T Kistler presses Spinning Automated aging and working‑condition simulation up to 120 °C KUKA KR120 R3100‑2/FLR robot (2021) Rcodpfezc N H Dox Airsh 3x Hoffmann ESV25‑AR2 spinning stations (2022) 4x cooling tracks Final balancing Automated balancing with pin insertion and verification KUKA KR120 R3100‑2/FLR robot (2021) 2x Schenk eTeno balancing machines (2021) 2x 1.5 T Kistler presses

Condition: used, Rotating Boring Table Travel X: 2000 mm Table size: Length 1240 mm x Width 1250 mm Bench width: 1030 mm Diameter of the ball screw: Ø 70 mm 2 motors INDRAMAT: 1 travel X motor + 1 table rotation motor Supplied without electrical panel (electrical cabinet to be redone) Protector hennig in average condition Ideal part for retrofitting Rsdpfxjz Nxmkj Airech Total bench length: 5200 mm Width: 1900 mm Height: 900 mm Weight: approx 7 T

Condition: excellent (used), Key Information: Type: Scissor lift / lifting table Load capacity: 500 kg Condition: used – fully operational Controls: remote up/down + emergency STOP Power supply: 230/400V Year of manufacture: 2012 Price includes: complete set as shown in the photos ⚙️ Technical specifications: Load capacity: 0.5 t (500 kg) Lifting height: approx. 630 mm Motor power: 0.8 kW Operating pressure: 196 bar Weight: approx. 170 kg Table dimensions: approx. 90 x 60 cm Power supply: 3-phase 230/400V Protection rating: IP55 🛠️ Description: We offer a professional hydraulic scissor lift – ideal for use in workshops, manufacturing, and warehousing. The device allows for safe and convenient lifting of heavy components to an ergonomic working height. Features include: - Stable scissor construction - Hydraulic lifting system - Remote control (up/down + emergency STOP) Perfect for: - Assembly work - Packing - Service and production - Loading and unloading 📦 Set includes: Rodpoz Sl Axefx Airsch - Scissor lift - Hydraulic power unit - Controls (remote) 🚚 Shipping: - Pallet shipping - Local pick-up possible

Condition: new, Year of construction: 2026, table length 1000 mm table width 1000 mm table height 200 mm weight 300 kg Manufacturer: GERD WOLFF Maschinenfabrik® Dimensions and Weight • Length: 1000 mm • Width: 1000 mm • Height: 200 mm • Weight: 300 kg Technical Specifications • Material: Welded Q355 steel plate • Plate thickness: 25 mm • Hole diameter: Ø 28 mm • Hole spacing: 100 mm diagonal grid pattern • Engraved grid lines with 100 mm spacing • Three-day gas nitriding process • Surface hardness of the nitrided layer: HV 450–630 • Laser-engraved precision scale • Reinforced underside with weld seams and ribs • Enhanced corrosion resistance, fatigue strength and resistance to cyclic loading • Protection against adhering welding spatter Table Legs • 4 height-adjustable table legs • Working height: 820–865 mm • Leg adjustment range: 620–665 mm • Load capacity per leg: approx. 1,500 kg Accessories • Optional 40-piece accessory set including various stops, stop and clamping squares, clamps, prism clamping bolts and more Available Table Sizes (L × W × H) 1000 × 1000 × 200 mm 1200 × 1200 × 200 mm 1200 × 2400 × 200 mm 1500 × 1000 × 200 mm 1500 × 1500 × 200 mm 1500 × 3000 × 200 mm 2000 × 1000 × 200 mm 2000 × 1500 × 200 mm 2000 × 3000 × 200 mm 2000 × 4000 × 200 mm 3000 × 2000 × 200 mm Notes The images are for illustrative purposes only and may differ from the actual dimensions. Our welding tables are manufactured by a renowned manufacturer exclusively for our distribution brand, GERD WOLFF Maschinenfabrik. Keywords 3D welding table system, welding table with 28 mm holes, precision fixturing table, welding and assembly table, 3D welding system, welding table with hole grid, welding table with diagonal grid pattern, nitrided welding table, steel welding table, height-adjustable welding table, welding table accessories, 3D welding fixture, modular clamping system, 3D clamping system for metalworking, welding table for mechanical engineering, welding table for metal fabrication, welding table with clamping bolts, welding table with precision scale, welding workstation with clamping system, professional industrial welding table Rcjdpfxsy S D Nas Airoh lding table with 28 mm holes, precision fixturing table, welding and assembly table, 3D welding system, welding table with hole grid, welding table with diagonal grid pattern, nitrided welding table, steel welding table, height-adjustable welding table, welding table accessories, 3D welding fixture, modular clamping system, 3D clamping system for metalworking, welding table for mechanical engineering, welding table for metal fabrication, welding table with clamping bolts, welding table with precision scale, welding workstation with clamping system, professional industrial welding table

Condition: new, table length 4000 mm Rcsdpfx Aisymf H Ujrjh table width 2000 mm table height 200 mm weight 2400 kg Notes The images are for illustrative purposes only and may differ from the actual dimensions. Our welding tables are manufactured by a renowned manufacturer exclusively for our distribution brand, GERD WOLFF Maschinenfabrik. Keywords 3D welding table system, welding table with 28 mm holes, precision fixturing table, welding and assembly table, 3D welding system, welding table with hole grid, welding table with diagonal grid pattern, nitrided welding table, steel welding table, height-adjustable welding table, welding table accessories, 3D welding fixture, modular clamping system, 3D clamping system for metalworking, welding table for mechanical engineering, welding table for metal fabrication, welding table with clamping bolts, welding table with precision scale, welding workstation with clamping system, professional industrial welding table lding table with 28 mm holes, p Technical Specifications • Material: Welded Q355 steel plate • Plate thickness: 25 mm • Hole diameter: Ø 28 mm • Hole spacing: 100 mm diagonal grid pattern • Engraved grid lines with 100 mm spacing • Three-day gas nitriding process • Surface hardness of the nitrided layer: HV 450–630 • Laser-engraved precision scale • Reinforced underside with weld seams and ribs • Enhanced corrosion resistance, fatigue strength and resistance to cyclic loading • Protection against adhering welding spatter Table Legs • 8 height-adjustable table legs • Working height: 820–865 mm • Leg adjustment range: 620–665 mm • Load capacity per leg: approx. 1,500 kg Accessories • Optional 40-piece accessory set including various stops, stop and clamping squares, clamps, prism clamping bolts and more Available Table Sizes (L × W × H) 1000 × 1000 × 200 mm 1200 × 1200 × 200 mm 1200 × 2400 × 200 mm 1500 × 1000 × 200 mm 1500 × 1500 × 200 mm 1500 × 3000 × 200 mm 2000 × 1000 × 200 mm 2000 × 1500 × 200 mm 2000 × 3000 × 200 mm 2000 × 4000 × 200 mm 3000 × 2000 × 200 mm Notes The images are for illustrative purposes only and may differ from the actual dimensions. Our welding tables are manufactured by a renowned manufacturer exclusively for our distribution brand, GERD WOLFF Maschinenfabrik. Keywords 3D welding table system, welding table with 28 mm holes, precision fixturing table, welding and assembly table, 3D welding system, welding table with hole grid, welding table with diagonal grid pattern, nitrided welding table, steel welding table, height-adjustable welding table, welding table accessories, 3D welding fixture, modular clamping system, 3D clamping system for metalworking, welding table for mechanical engineering, welding table for metal fabrication, welding table with clamping bolts, welding table with precision scale, welding workstation with clamping system, professional industrial welding table lding table with 28 mm holes, precision fixturing table, welding and assembly table, 3D welding system, welding table with hole grid, welding table with diagonal grid pattern, nitrided welding table, steel welding table, height-adjustable welding table, welding table accessories, 3D welding fixture, modular clamping system, 3D clamping system for metalworking, welding table for mechanical engineering, welding table for metal fabric...

Condition: new, table length 2400 mm table width 1200 mm table height 200 mm material thickness 25 mm weight 920 kg Manufacturer: GERD WOLFF Maschinenfabrik® Dimensions and Weight • Length 2400 mm • Width 1200 mm • Height 200 mm • Weight 920 kg Technical Specifications • Material: Welded Q355 steel plate • Plate thickness: 25 mm • Hole diameter: Ø 28 mm • Hole spacing: 100 mm diagonal grid pattern • Engraved grid lines with 100 mm spacing • Three-day gas nitriding process • Surface hardness of the nitrided layer: HV 450–630 • Laser-engraved precision scale • Reinforced underside with weld seams and ribs • Enhanced corrosion resistance, fatigue strength and resistance to cyclic loading • Protection against adhering welding spatter Table Legs • 6 height-adjustable table legs • Working height: 820–865 mm • Leg adjustment range: 620–665 mm • Load capacity per leg: approx. 1,500 kg Accessories • Optional 40-piece accessory set including various stops, stop and clamping squares, clamps, prism clamping bolts and more Available Table Sizes (L × W × H) 1000 × 1000 × 200 mm 1200 × 1200 × 200 mm 1200 × 2400 × 200 mm 1500 × 1000 × 200 mm 1500 × 1500 × 200 mm 1500 × 3000 × 200 mm 2000 × 1000 × 200 mm 2000 × 1500 × 200 mm 2000 × 3000 × 200 mm Rcodpjynbmmofx Aireh 2000 × 4000 × 200 mm 3000 × 2000 × 200 mm Notes The images are for illustrative purposes only and may differ from the actual dimensions. Our welding tables are manufactured by a renowned manufacturer exclusively for our distribution brand, GERD WOLFF Maschinenfabrik. Keywords 3D welding table system, welding table with 28 mm holes, precision fixturing table, welding and assembly table, 3D welding system, welding table with hole grid, welding table with diagonal grid pattern, nitrided welding table, steel welding table, height-adjustable welding table, welding table accessories, 3D welding fixture, modular clamping system, 3D clamping system for metalworking, welding table for mechanical engineering, welding table for metal fabrication, welding table with clamping bolts, welding table with precision scale, welding workstation with clamping system, professional industrial welding table lding table with 28 mm holes, precision fixturing table, welding and assembly table, 3D welding system, welding table with hole grid, welding table with diagonal grid pattern, nitrided welding table, steel welding table, height-adjustable welding table, welding table accessories, 3D welding fixture, modular clamping system, 3D clamping system for metalworking, welding table for mechanical engineering, welding table for metal fabrication, welding table with clamping bolts, welding table with precision scale, welding workstation with clamping system, professional industrial welding table

Condition: new, table length 3000 mm table width 2000 mm table height 200 mm weight 1700 kg Manufacturer: GERD WOLFF Maschinenfabrik® Dimensions and Weight • Length: 3000 mm • Width: 2000 mm • Height: 200 mm • Weight: 1700 kg Technical Specifications • Material: Welded Q355 steel plate • Plate thickness: 25 mm • Hole diameter: Ø 28 mm • Hole spacing: 100 mm diagonal grid pattern • Engraved grid lines with 100 mm spacing • Three-day gas nitriding process • Surface hardness of the nitrided layer: HV 450–630 • Laser-engraved precision scale • Reinforced underside with weld seams and ribs • Enhanced corrosion resistance, fatigue strength and resistance to cyclic loading • Protection against adhering welding spatter Table Legs • 8 height-adjustable table legs • Working height: 820–865 mm • Leg adjustment range: 620–665 mm • Load capacity per leg: approx. 1,500 kg Accessories • Optional 40-piece accessory set including various stops, stop and clamping squares, clamps, prism clamping bolts and more Available Table Sizes (L × W × H) 1000 × 1000 × 200 mm 1200 × 1200 × 200 mm Rodpfx Ajymf R Hsiroch 1200 × 2400 × 200 mm 1500 × 1000 × 200 mm 1500 × 1500 × 200 mm 1500 × 3000 × 200 mm 2000 × 1000 × 200 mm 2000 × 1500 × 200 mm 2000 × 3000 × 200 mm 2000 × 4000 × 200 mm 3000 × 2000 × 200 mm Notes The images are for illustrative purposes only and may differ from the actual dimensions. Our welding tables are manufactured by a renowned manufacturer exclusively for our distribution brand, GERD WOLFF Maschinenfabrik. Keywords 3D welding table system, welding table with 28 mm holes, precision fixturing table, welding and assembly table, 3D welding system, welding table with hole grid, welding table with diagonal grid pattern, nitrided welding table, steel welding table, height-adjustable welding table, welding table accessories, 3D welding fixture, modular clamping system, 3D clamping system for metalworking, welding table for mechanical engineering, welding table for metal fabrication, welding table with clamping bolts, welding table with precision scale, welding workstation with clamping system, professional industrial welding table lding table with 28 mm holes, precision fixturing table, welding and assembly table, 3D welding system, welding table with hole grid, welding table with diagonal grid pattern, nitrided welding table, steel welding table, height-adjustable welding table, welding table accessories, 3D welding fixture, modular clamping system, 3D clamping system for metalworking, welding table for mechanical engineering, welding table for metal fabrication, welding table with clamping bolts, welding table with precision scale, welding workstation with clamping system, professional industrial welding table

Condition: new, Year of construction: 2026, The CORMAK TA3510R scissor lift table trolley with rollers is a mobile device designed for lifting, transporting, and transferring loads between workstations. The platform, equipped with 9 transport rollers, facilitates the movement of components and containers, while the wide height adjustment range allows the working level to be adapted to machines, assembly tables, and other loading and unloading stations. Key Benefits of the TA3510R Scissor Lift Table Trolley with Rollers - Load capacity of up to 350 kg – enables the handling of heavy components, containers, semi-finished products, and other loads used in production and logistics processes. - 9 rollers with a diameter of 50 mm – reduce resistance when moving loads across the working surface and facilitate their transfer to adjacent workstations. - Lifting height of up to 1360 mm – allows the working surface height to be adjusted to different material loading and unloading levels. - Working height range from 400 to 1360 mm – enables a single device to be used at workstations of different heights. Rodpfx Aij Aa Nf Djrjch - Mobile design – allows loads to be transported between successive stages of the production process without the need for a stationary lift table. - Transport, lifting, and load transfer functions – one trolley can perform several operations related to material handling within a facility. Roller Platform for Easier Material Handling The key feature of the TA3510R model is its working surface equipped with 9 rollers, each 50 mm in diameter. Unlike a conventional solid platform, the rollers allow properly supported loads to be moved along the working surface without having to lift them completely when transferring them to the next workstation. This solution is particularly useful when working with workbenches, assembly stations, production lines, and other material transfer surfaces. Once the platform has been adjusted to the appropriate height, the load can be moved from the trolley to the workstation or in the opposite direction. This reduces the number of manual lifting operations and improves material flow between successive stages of the production process. Wide Working Height Adjustment Range The TA3510R scissor lift table trolley operates within a height range of 400 to 1360 mm. This allows the rollers to be positioned at a level suitable for receiving or transferring loads, which is particularly important when servicing workstations of different heights. The adjustable height can also improve operator ergonomics. Instead of repeatedly lifting a heavy component from a low position onto a workstation, the trolley platform can be positioned as close as possible to the required height, allowing the load to be moved along the rollers. During repetitive production and assembly operations, this reduces unnecessary material handling. Mobile Lift Table for Production and Internal Logistics The lift table with rollers combines the functionality of a mobile transport device with an adjustable material transfer station. The 455 × 800 mm working surface allows various components, containers, and assemblies to be handled, provided that the load is properly supported and the maximum permissible load capacity is not exceeded. TA3510R Technical Specifications Load capacity 350 kg Minimum table height 400 mm Maximum table height 1360 mm Working surface dimensions 455 × 800 mm Wheel diameter 120 mm Rollers 9 × Ø50 mm Weight 106 kg

Condition: excellent (used), CATALOGUE NUMBER 7918 TECHNICAL DATA - max. disc diameter: 450mm - spindle diameter: 30mm - top pneumatic clamping - disc guard - disc guard also functions as a clamping device - pneumatic disc extension Redpfx Ais Af I E Iorsch - cutting height (at a width of 250mm): 120mm - at a smaller height, the width will be larger - main motor: 6kW - diameter of dust extraction port: 120mm - table dimensions (length/width): 650x850mm - table height from the base: 1000mm - roller tables: - infeed roller table + pawl: 3180mm - outfeed roller table + pawl: 2450mm - width of sliding roller: 360mm - operating pressure: 8 bar - overall machine dimensions (without roller tables) (length/width/height): 1300x1050x1800mm - weight: 550kg ADVANTAGES - 2 roller tables - pneumatic disc stroke - used saw, in perfect condition Net price: 14900 PLN Net price: 3470 EUR, depending on the exchange rate of 4.3 EUR (Prices may change due to higher fluctuations)

Condition: like new (used), Year of construction: 1983, operating hours: 5,500 h, functionality: fully functional, travel distance X-axis: 2,000 mm, travel distance Y-axis: 1,450 mm, travel distance Z-axis: 1,250 mm, table load: 12,000 kg, spindle diameter: 125 mm, spindle speed (min.): 50 rpm, spindle speed (max.): 3,000 rpm, total height: 4,000 mm, total length: 9,000 mm, total width: 6,000 mm, table length: 1,450 mm, table width: 1,250 mm, spindle mount: MK 5, type of input current: AC, workpiece weight (max.): 12,000 kg, drill spindle length: 600 mm, spindle stroke: 600 mm, mount diameter: 50 mm, control cabinet width: 600 mm, control cabinet length: 4,000 mm, control cabinet height: 2,000 mm, overall weight: 24,350 kg, year of last overhaul: 2017, Equipment: crane, rotational speed infinitely variable, Coolant system with 4 nozzles and center spindle Protective door at the operator station * The machine does not require a foundation but is installed on a specially designed polymer bed, standing 600 mm high. * Additional feature: A CNC-controlled rotary table is integrated into the boring quill, allowing for the machining of contours up to a diameter of 600 mm. The machine was electrically and mechanically overhauled by Scharmann, most recently in 2015. During the overhaul, the entire electrical system was replaced, and the control system was upgraded to Siemens 840 D. In the mechanical area, for example, the roller bearing shoes and the ball screw in the Z-axis were replaced, as well as the spindle head, including its guide and flyer chains for the counterweights, which were inspected and/or renewed. In addition, HCR installed a machine enclosure (open at the top), which was integrated into the safety concept, including operating mode 4, by Scharmann. Redo Agd Ahepfx Airoch In 2017, the CNC rotary table, the differential gear, and the boring spindle unit were dismantled and overhauled at the Scharmann factory (new bearings, seals, and gears).

Condition: new, CATALOGUE NUMBER RE041 - new machine Rsdpfj Aggdzjx Airsch TECHNICAL DATA - saw blade diameter ⌀250 – 350/30 mm - scoring blade diameter (only works with ⌀300, 350 mm blades) ⌀120/20 mm - main motor power 4 kW - scoring motor power 0.75 kW - rotational speed 4000 rpm - scoring blade rotational speed 8800 rpm - blade tilt 0 – 45° - max. cutting length 2000 mm - cutting width with parallel fence 1250 mm - splitter ⌀350 mm - spindle flange diameter 87.5 mm - table fence adjustable to 90° – 45° angle, accuracy ±1° - max. cutting height with ⌀300 mm blade 95 mm - max. cutting height with ⌀350 mm blade 120 mm - upper dust extraction port diameter ⌀80 mm - lower dust extraction port diameter ⌀100 mm - weight 620 kg - dimensions of folded machine (length/width/height) 2255x3460x1450 mm Net price: 19900 PLN Net price: 4628 EUR Net price calculated based on the exchange rate of 4.30 PLN/EUR (price may change in case of significant exchange rate fluctuations)

Condition: used, Year of construction: 1984, Table length: 3200 mm Cutting width at the rip fence: 1250 mm Cutting width at the crosscut fence: 2800 mm Cutting depth: 145 Scoring saw: no Saw blade height adjustment: manual / hydraulic Saw blade swivel adjustment: manual / hydraulic Rip fence adjustment: manual Saw blade angle display: scale Cutting height display: - Rip fence display: scale Crosscut fence display: scale Saw blade diameter: Speeds: 4 Motor power: 5.5 kW Motor brake: yes Dust extraction connection: 80 mm and 120 mm Machine length: 3000 mm Rcodpfx Ao Af Hmpsireh Machine width: 1700 mm Weight: 1000 kg

Condition: good (used), Year of construction: 1998, functionality: fully functional, Robust and high-quality table milling machine from the manufacturer Hofmann. The machine was manufactured in 1998 and is suitable for a wide range of milling operations in carpentry and woodworking. Rcedpo Agm T Hjfx Airsh Technical data: - Manufacturer: Hofmann - Type: TF 1200 - Year of manufacture: 1998 - Machine number: 126-01986 - Motor power: 5.0 / 6.2 kW - Three-phase connection: 400 V, 50 Hz - Current consumption: 10 / 13 A - Milling spindle: Ø 30 mm - Spindle speeds: 3,000 / 4,000 / 5,000 / 6,000 / 8,000 / 10,000 rpm - Spindle: not swiveling - Height adjustment: manual via handwheel - Dust extraction connections: typically 2 × Ø 120 mm Feed system – additional cost of €500 net. Inspection and test run possible by arrangement. Loading and shipping can be arranged.

Condition: excellent (used), Year of construction: 2020, - total length: 8,1 m - total width: 1200 mm - height: 950 mm Rsdpfx Aietddw Aorech Hydraulic lift, lifting capacity around 1 ton.

Condition: as good as new (ex-display), Year of construction: 2016, operating hours: 7,000 h, machine/vehicle number: 0012, REM SC 33 CNC 2MS | Dual-Head CNC Vertical Turning Center | Ø3,300mm Heavy-duty CNC Vertical Turning Center with two independent milling heads and dual automatic tool magazines — built for continuous precision production of large components. CAPACITIES: • Max. Turning Diameter: 3,300 mm (per head) • Max. Machining Height: 2,000 mm (under cross rail) • Max. Workpiece Weight: 20 tonnes WORK TABLE: • Table Diameter: 3,000 mm • Speed (infinitely variable): 1–110 rpm • Main Motor Drive (AC): 100 kW MILLING HEADS (2×): • Each head with independent ATC tool magazine • Simultaneous or independent dual-head operation • CNC-controlled X, Z, W axes Rjdpfx Asdpdfzeirech KEY ADVANTAGES: ✔ Dual-head configuration = double productivity ✔ Proven REM design — used in energy, mining, and heavy industry ✔ Rigid, thermally stable construction for long-term precision ✔ Full CNC control with digital drives Manufactured by REM Bacau – Romania | Over 60 years of VTL expertise. Machine available for inspection under power. Worldwide export. Contact us for full technical datasheet, video, and quotation.

Condition: ready for operation (used), Year of construction: 2026, functionality: fully functional, table width: 1,500 mm, overall weight: 1,000 kg, table length: 3,000 mm, workpiece weight (max.): 4,000 kg, borehole diameter: 28 mm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Table length: 3,000 mm Table width: 1,500 mm Table plate thickness: 15 mm Workpiece weight: max. 4,000 kg Bore diameter: 28 mm Rcodpfe Af Hdnsx Airoh MACHINE DETAILS Dimensions & Weight Dimensions (L x W x H): 3,000 x 1,500 x 1,000 mm Empty weight: 1,000 kg Number of transport packages: 1 Included accessories: 4× 3D angle brackets, 300 mm (2× left, 2× right) 6× flat stops, 150 mm 6× flat stops, 225 mm 1× protractor 2× V-blocks 1× eccentric stop 1× flat angle bracket 12× clamping screws 12× quick clamps

Condition: used, Year of construction: 2020, machine/vehicle number: 30.04.004.20, functionality: fully functional, power: 14 kW (19.03 HP), Format4 kappa automatic 80, industrial panel sizing saw for cutting/sizing wood panel materials Details Format4 kappa automatic 80 Panel sizing saw for cutting/sizing wood panel materials Year of manufacture: April 2020 Serial number: 30.04.004.20 Cutting length: 3,200 mm Cutting depth: 3,200 mm Cutting height: 80 mm (package clamp opening: 75 mm) Saw blade: 320 mm Scoring saw blade: 150 mm with 1.1 kW motor 8 package clamps 24-inch touchscreen Label printer Electric cutting height adjustment Clean-cut device Side pressure device: 20–1,200 mm 3 air cushion tables: 2,300 x 600 mm Electrical Data V: 400 PH: 3 HZ: 50 A: 36 kW: 14.0 Dimensions and Weight Length: 660 cm Width: 540 cm Height: approx. 160 cm (detailed dimensions shown in the photos) Weight: approx. 4,400 kg Redpe Afw H Hefx Airjch Other Various saw blades included Condition: Used Pallets included The machine has already been disassembled and is ready for transport. The first photo is a stock photo.

Condition: excellent (used), Year of construction: 1995, functionality: fully functional, total width: 1,325 mm, total height: 3,250 mm, total length: 3,735 mm, overall weight: 5,000 kg, We offer a table-type shot blasting machine – Škoda TMSO 2.4/5. The machine has 2 rotating tables with a diameter of 1000 mm. It features one turbine with a power input of 7.5 kW. The machine is in excellent condition, fully functional, and can be tested in operation. Rcodpfoz Dfuvjx Airoh

Condition: excellent (used), Year of construction: 2015, machine/vehicle number: 15-11-12-098, functionality: fully functional, power: 5.5 kW (7.48 HP), saw blade diameter: 500 mm, Excellent condition Machine available from January 2027 - Equipment package "B" - Saw blade, D = 500 mm - Motor power 5.5 kW (7.5 hp) Vario - 2-axis scoring unit Rcedpfx Aio Af Ub Uorsh - Double roller carriage, L = 3200 mm - On/off switch on the double roller carriage - Miter stop on the cross table up to 3200 mm with Digit-L - CNC parallel stop, 1300 mm - Control panel at eye level - Template holder - Table extension, 840 mm

Condition: like new (used), machine/vehicle number: INDUSTRY 9, power: 7.5 kW (10.20 HP), input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, cutting height (max.): 300 mm, cutting width (max.): 630 mm, saw blade diameter: 120 mm, total length: 1,240 mm, total width: 1,170 mm, total height: 1,280 mm, overall weight: 850 kg, Equipment: CE marking, Przemysłowa grubościówka ROJEK RFT 630 z serii INDUSTRY 9, przeznaczona do strugania drewna litego na zadaną grubość. Sprawdzi się w zakładach stolarskich przy obróbce desek, kantówek oraz elementów meblowych. Maszyna wyposażona w wał spiralny z wymiennymi, wieloostrzowymi płytkami skrawającymi. Rozwiązanie umożliwia obracanie poszczególnych płytek po zużyciu krawędzi oraz wymianę pojedynczego ostrza w przypadku uszkodzenia. Panel elektroniczny ELGO z wyświetlaczem i klawiaturą numeryczną ułatwia ustawianie wysokości roboczej. DANE I WYPOSAŻENIE: – producent: ROJEK, – model: RFT 630, – seria: INDUSTRY 9, – typ maszyny: strugarka grubościowa do drewna, – wał spiralny na wymienne płytki skrawające, – płytki z czterema oznaczonymi krawędziami, – elektryczna regulacja wysokości stołu, – panel sterowania ELGO P4011, – dodatkowa mechaniczna skala wysokości, – masywny stół roboczy z rolkami, – czterokolumnowe podparcie stołu, – osłony harmonijkowe kolumn, – mechaniczny posuw materiału, – segmentowy, metalowy wałek podający, – zabezpieczenie przeciwodrzutowe, – podnoszona górna pokrywa z wygłuszeniem, – wyłącznik awaryjny. Rcedpfo Aggbmex Airjh ZASTOSOWANIE: – struganie desek i kantówek, – nadawanie elementom jednakowej grubości, – przygotowanie materiału do klejenia i dalszej obróbki, – produkcja elementów meblowych i stolarki drewnianej.

Condition: ready for operation (used), Year of construction: 2000, functionality: fully functional, travel distance X-axis: 3,000 mm, travel distance Y-axis: 1,600 mm, travel distance Z-axis: 1,600 mm, feed length W-axis: 900 mm, workpiece weight (max.): 12,000 kg, overall weight: 30,000 kg, year of last overhaul: 2020, For Sale – Used CNC Horizontal Boring Machine UNION BFKR 150 CNC Control: HEIDENHAIN TNC 530 CNC Retrofit: The machine was retrofitted with CNC control in 2020. Technical Specifications: X-axis travel: 3,000 mm Y-axis travel: 1,600 mm Z-axis travel: 1,600 mm W-axis travel: 900 mm (spindle travel) Spindle diameter: Ø 150 mm B-axis: 360° – CNC-controlled rotary table Table dimensions: 1,600 × 2,000 mm Redpfx Ae Afm Uyeirech Machine Condition: The machine is currently still connected to the power supply and is available for inspection and a test run. The machine underwent a mechanical overhaul approximately three years ago, including the replacement of bearings and other components. The machine has been out of operation for approximately six months.

Condition: used, Year of construction: 1971, For sale is a TOS WH 80 drilling machine, manufactured in 1971, in working condition. The machine is equipped with a retrofitted digital display and has an MK5 spindle. Equipment / Condition: * TOS WH 80 * Year of manufacture: 1971 * Functional * Retrofitted digital display * MK5 spindle * Large clamping table with T-slots * A large amount of additional equipment and accessories is available Rcsdpfx Aozwv Dkoirsh * Maintenance / Repairs: In 2024, the gearbox was opened and overhauled. Various gears were renewed or replaced during this process. The machine can be inspected on-site and, by arrangement, demonstrated. Due to its size and weight, the buyer is responsible for organizing the collection or transport. Further photos and information on the available additional equipment are available upon request. VAT can be shown separately.

Condition: excellent (used), Motor: 5.5 kW Cutting height: 9 cm Table length: 330 cm Feed width: 100 cm Rsdpfx Aie Agrffersch Scoring unit Cutting angle and cutting height are hydraulically adjustable.