Used Automatic Spray Machine for sale (76,640)

Condition: used, Riveting machine, double riveting unit with rotary indexing table, DUNKES Type DN 4 Rotary table, rotary indexing table with SIEMENS control Machine No. P 81 - 5458, Year of manufacture 1982 / 2009 Rivet shank diameter max. 12 mm Tool shank diameter 16 mm Overhang 190 mm Rivet head stroke per riveting unit approx. 60 mm Rivet spindle speed approx. 1400 rpm Installation height, tool - counter-tool max. 80 mm Compressed air requirement 6 bar Motor power per riveting unit 1.1 kW Mains connection 380 Volt, 50 Hz - Rotary table, indexing table with servo drive, step size programmable via Siemens PLC control - Double riveting unit is adjustable within the machine frame relative to the rotary table - Table size Ø 295 mm for holding round workpieces - Pneumatic riveting stroke - Riveting unit adjustment via geared motor with leadscrew, positioning via adjustable microswitch - Modernization of the control system and conversion of the servo drive in the rotary table in 2009 - New electrical control cabinet with Siemens Simatic Panel - Year of manufacture 2009 - Riveting time can be programmed continuously - Riveting pressure can be adjusted continuously via pressure gauge - Micrometer stop for limiting the stroke of the counter-rotating riveting units 0-60 mm Space requirement L x W x H 3200 x 1250 x 2400 mm Nededzp T Nepfx Adpecu Weight approx. 2500 kg Good condition The machine was used for riveting segment saw blades with diameters of 400 to 2000 mm. The segments were manually placed on the support disc and fixed with straight rivets. The counter-rotating riveting unit rivets the shank simultaneously from both sides. The controlled table automatically rotates to the next working position. Ideal for saw blade manufacturers and repair companies. Or for building a special-purpose machine.

Condition: used, Semi-automatic tube bending machine, mandrel tube bender MOBITEC type BAH 1-2 Ncedpfx Adopu R Nvepju KOTTMANN und BERGER GmbH Serial No. Year of construction for simultaneous bending of two steel tube sections up to Ø 12 mm Bending angle max. 90° Tube diameter max. 12 mm Mandrel length approx. 65 mm Rated power 3.5 kW Compressed air max. 6 bar / approx. 1 litre per bending cycle Power supply 400 Volt, 50 Hz - Pneumatic clamping - Pneumatic mandrel retraction - Angle input control via STÖBER Controlbox Series 4000/5000 - SIEMENS S7-200 control with TD200 display - Machine without bending tools and without tool storage pins 25 x 183 mm - Only 1 bending mandrel available (see pictures). Required space (L x W x H) 1000 x 1000 x 1500 mm Weight 390 kg Good condition

Condition: ready for operation (used), Year of construction: 2007, functionality: fully functional, machine/vehicle number: 070139, working width: 1,300 mm, suction capacity: 12,000 m³/h, overall weight: 5,000 kg, workpiece height (max.): 80 mm, Submitting a bid obligates you to collect the item by the deadline of June 22, 2026! TECHNICAL DETAILS Working width, max.: 1,300 mm Nsdpoy Tvc Uefx Adpocu Workpiece length, min.: 300 mm Workpiece thickness, max.: 80 mm MACHINE DETAILS Traversing system: CNC-controlled with oscillating arms Air supply, spray booth: 12,000 m³/h Extraction: 12,000 m³/h Fan power: 7.5 kW Spray guns: 4 pieces Power, main motor: 15 kW Voltage: 400 V Current consumption: 32 A Total power: 15.6 kW Working pressure, max.: 120 bar Dimensions & Weight Dimensions in assembled condition: 7,000 x 4,300 x 3,200 mm Dimensions (L x W x H): 11,000 x 2,400 x 2,400 mm Weight: 5,000 kg Transport packages: 4 pieces EQUIPMENT CE marking Spray gun Pump type: Wagner Number of spray booths: 1

Condition: new, saw blade diameter 400 mm Number of revolutions 3000 r.p.m hole of sawblade 32 mm sawblade width 4 mm Control NC total power requirement 1,5-2 kW weight of the machine ca. 162 kg required space 740 x 780 x 1350 mm The Gerd Wolff AC 400 is an automatic aluminium cutting machine which is manufactured for our sales brand "GERD WOLLF Maschinenfabrik" by a renowned manufacturer from Türkiye. Standard Accessories -BLocation points for 15° – 22.5° – 30° – 45° – 67.5° - Fixing handle for locking at intermediate angles - Adjustable cutting speed for different types of profile - Saw covering with safety switch - Belt propulsion saw - Two hand safety operation - Easy to change saw blade - 2 x Pneumatic vertical piston with clamps - 1 x compressed air pistol Optional Equipment - Hydrocheck – Hydraulic speed adjustment for aluminium profiles - Cooling system for aluminium cutting - Auxiliary conveyor with rulers Nedpfoy S Dwwsx Adpscu

Condition: like new (used), Year of construction: 2022, functionality: fully functional, Designed for flexible packaging of industrial food products, chemicals, powders, granular materials, frozen foods, snacks, dried fruits, rice, pasta, coffee, cereals, legumes, sugar, salt, flours, pet food, pellets, fertilizers, and other similar products. High productivity, great versatility, and a maximum speed of 60 bags per minute when working with bags that are 40 to 250 mm wide and up to 400 mm long. Accepts film, PE, composite films, heat-sealable paper, and recyclable film. Incorporates a PLC with an OMRON touch screen, software control, Ethernet and WiFi communication, peripheral integration, and SCADA connection capability. Features a vertical and horizontal sealing system, servomotor, encoder, photocell, toothed blade, Linatex belts, round, oval, or rectangular forming tubes, and an IP65 electrical panel. The machine includes a feed conveyor belt and an output conveyor belt, operates at 400 V with a three-phase power supply and an installed power of 1.5 kW. Maximum power consumption is 7 kW, and compressed air consumption is 50 to 150 l/min. Dimensions are 1950 x 1240 x 2020 mm. Njdpfey Ui Dnjx Adpscu

Condition: good (used), HR 4 automatic polisher Manufacturer: Hau With 4 working spindles. 1 spindle is used for loading and unloading, two work spindles are in constant use. Ncodpfx Adoqmfv Depeu

Condition: good (used), Used rotary indexing table polishing machine Nsdpfjqmfv Sex Adpscu Manufacturer: Hau Rotary indexing table with 6 work spindles and 3 polishing stations with oscillation and high-pressure guns, 5.5 kW motors, gripper clamping system, switch cabinet

Condition: excellent (used), - Dimensions (LxWxH): 500x300x250 mm - Output: 4-6 kg - Serial Number: L17000531 Iiedjwyc Ukscu T Rxiei - Year: 2017 - Voltage: 400V Ncjdswyc Ukopfx Adpsu - Power: 0.65 kW - Weight: 27 kg - Condition: New, never used The listing was translated automatically. Translation errors are possible.

Condition: good (used), Year: 2005 Equipment: Max. size 320 x 420 mm Min. size 75 x 150 mm Speed: Max. 10,800 cycles/hour Number of stitches: Standard 11 Power requirements: 6 kW (220/380V, 50Hz) Air requirement (6 bar): 200 m³/h Width: 2730 mm Depth: 1800 mm Weight: 3000 kg (approx.) Equipment: Fully automatic book sewing machine • Automatic feeder • 4 upper and 4 lower signature openers Ncsdpfx Adjvp Rw Tjpsu • Computer program • Thread cutting device Condition: Very clean, in excellent working condition. Machine was refurbished in 2024.

Condition: excellent (used), Year of construction: 2024, operating hours: 50 h, Lamella Production Machine The automatic acoustic panel stapler is equipped with an advanced three-axis NC control system, providing exceptional precision and flexibility in the manufacturing process. Below are the detailed advantages of each axis: 1. X-Axis: Precise Stapler Positioning Along the Horizontal Axis - The X-axis ensures accurate horizontal positioning of the staplers along the panel. This guarantees that staples are precisely applied at designated points, ensuring consistent stitching quality across the entire length of the panel, regardless of its size. 2. Y-Axis: Vertical Movement - The Y-axis allows vertical movement of the stapler, enabling stapling at various locations on the panel, regardless of its dimensions or shape. This enables the stapler to work with non-standard sized panels while maintaining full accuracy. 3. Z-Axis: Depth and Stapling Force Control - The Z-axis controls the depth and force with which the staples are driven into the panel. This allows the process to be precisely adjusted according to the thickness and hardness of the acoustic panel material. As a result, staples are embedded with optimal strength, ensuring the durability and aesthetics of the finished product while minimizing the risk of material damage. ### Automatic Changeover Automatic changeover is a key feature that significantly enhances production efficiency. With this function: - Changeover of the X, Y, and Z axes is fully automatic. ### Production Process Optimization Integration with production management systems such as MES (Manufacturing Execution System) and ERP (Enterprise Resource Planning) enables: 1. Full Control Over the Manufacturing Process: - Thanks to MES and ERP integration, every stage of production can be fully monitored and managed. 2. Optimization of Media and Material Consumption: 3. Optimization of Production Plans: ### Significant Relief for Operators Automation of the acoustic panel stapling process directly reduces manual workload: - Elimination of manual control requirements - Increased work efficiency ### Capability to Develop Algorithms for Media Demand Analysis Thanks to advanced integration with manufacturing management systems, the stapler allows for the creation of sophisticated algorithms to analyze production media demand: 1. Media Demand Analysis: 2. Adapting Production to Variable Conditions: ### OEE (Overall Equipment Effectiveness) Analysis The stapler also facilitates advanced OEE analysis, a key performance indicator in production operations: Njdpfx Asy Sw I Nsdpocu 1. Comprehensive Production Monitoring: 2. Automatic OEE Calculation: - The MES system automatically calculates the OEE value based on collected data, allowing immediate assessment of the stapler’s operational efficiency. This tool enables rapid identification of areas requiring optimization, such as downtime reduction, product quality improvement, or machine performance enhancement. 3. Early Detection of Problematic Areas: 4. Optimization of Production Plans: ### TPM (Total Productive Maintenance) and Automated Condition Monitoring The stapler also supports the implementation of TPM philosophy, focusing on maximizing machine efficiency and reliability...

Condition: used, Year of construction: 1994, table length: 1,780 mm, table width: 1,250 mm, pressing force: 320 t, High-performance mechanical punching press with coil line for strip material processing in series production. Manufacturer: Kaiser Pressen Ncedpfey Ndyajx Adpsu Model: KSTU 3150-15 R Machine type: Punching press Year of manufacture: 1994 Press force: 3150 kN Drive type: Mechanical Stroke rate: 20 – 120 spm Ram stroke: 20 – 150 mm Ram adjustment: 150 mm Table area: 1780 x 1250 mm Ram area: 1500 x 1000 mm Shut height: 565 mm Max. tool weight: 3000 kg Strip width: 30 – 800 mm Strip thickness: 0.5 – 3 mm Max. strip thickness: 4 mm Strip entry height: 160 – 260 mm Strip speed: 4 – 30 m/min Straightening rolls: 9 pcs Feed accuracy: ± 0.1 mm Coil inner diameter: 508 mm Coil outer diameter: 1000 – 1500 mm Supply voltage: 3 x 400 V Air pressure: 5 bar Location: Radeberg

Condition: used, - Dimensions: 1100x900x1330 mm - Serial No.: 9624893 - Year: 2006 - Plate: 400x600 - Control panel with keypad - Brand: BRAVO - Model: QUIKLY - Voltage: 220 V - Weight: 240 kg Ncedpfjwxym Isx Adpju - Power: 1.5 kW

Condition: used, machine/vehicle number: 006157, Max. panel width: 1000 mm Max. panel length: 2500 mm No of Bottom Units: 5 No of Top Units: 1 Ncsdpfx Adsy Nkyaepou Positioning of Units by NC: yes Lateral horizontal groups: yes

Condition: used, machine/vehicle number: 006106, Max. panel width: 700 mm Max. panel length: 2500 mm No of Top Units: 1 Positioning of Units by NC: yes Ncsdpfx Ajy Nkmmedpsu Lateral horizontal groups: yes

Condition: used, machine/vehicle number: 005448, Max. panel width: 3000 mm Max. panel length: 1350 mm No of injectors: 24 Ncjdowcydzjpfx Adpou

Condition: good (used), Year of construction: 2004, functionality: fully functional, Bobst SPO 160 Vision, ref. 3002 Njdpfx Aoy Tpfvjdpscu Year 2004 Maximum sheet size: 1600x1100mm Maximum speed: 4500 sheets per hour QUBE system Stripping unit Batch delivery In good working order.

Year of construction: 2020, condition: new, Use of one photocell Using one photocell in the space of workpiece allows you to measure the length of the workpiece and, consequently, gives you the opportunity to turn on the guns when the item is in range, and to switch off the gun immediately after the workpiece is finished. The photocell is included in the standard equipment.Identification of details using special tags. A plate with identification holes is placed over the suspension. Based on this, the PLC controller in conjunction with the photocell recognizes the painted detail, turns on and off the guns in a timely manner - thus braking the energy and powder coating. Vertical detection of the detail of the workpiece. The use of light gates with detectors horizontally allows the PLC to analyze the vertical shape of the workpiece. Application of light gates with multiple sensors horizontally and vertically. This solution allows precise measurement of the dimensions of the workpiece, which makes it possible also to manipulate the manipulators. Benefits of using gates and photocells The benefits of using photocells or light gates are primarily energy and powder savings. Ncjdpefy T Arsfx Adpsu Eliminate painting of a zone in which there is no detail. With the use of light gates, precise control of the guns. Our lines can be optionally equipped with photocells, or light gates Using one photocell in the workpiece space allows you to measure the length of the workpiece and, consequently, gives you the ability to turn on guns when the item appears in their range, and turn off the gun immediately after the workpiece is finished.Identification of details using special tags. A plate with identification holes is placed over the suspension. Based on this, the PLC controller in conjunction with the photocell recognizes the painted detail, turns on and off the guns in a timely manner - thus saving the energy and powder.The use of light gates with detectors horizontally allows the PLC to analyze the vertical shape of the workpiece. The PLC counts the time in which the detail will appear in the gun space - allowing guns to be selectively switched on or off.Using of light gates with multiple sensors horizontally and vertically This solution allows precise measurement of the dimensions of the workpiece, which makes it possible also to adjusting the manipulators.The benefits of using photocells or light gates are primarily powder and energy savings Eliminate painting of a zone in which there is no detail With the use of light gates, precise control of the guns The PLC counts the time at which the detail should appear in the gun space - allowing guns to be selectively switched on or off.

Year of construction: 2026, condition: new, functionality: fully functional, ZIM BT 1200 machine is designed to increase efficiency for production of manhole base, parcel base products etc. It’s production capacity is very high when you compare with the ordinary machines. It has uniqe specifications to increase production capacity, using life, products quality. Nodpfxoibywle Adpjcu The machine consistes of 3 different part. Pallet Stocking Robot, Vibration and Moulding Unit, Mortar Filling Cart. This machine can produce pipes 1200mm diameter and 1500mm height. This machine makes all the production full automatic and we use SIEMENS brand PLC microprocessors on it. There is mortar filling cart on machine. We use inner filling system for mortar filling cart and it makes equal and fast filling to moulds. There is a Pallet Stocking Robot system and it gives the pallets to the machine automatically. Production is done on production pallets, This production pallets should wait till the products dry and it takes around 24 hours if there is no curing system. The vibration system of machine is controlled by frequency driver controll system. It does not need any mechanic settings. It can easily adjusted from operator pannel. Special designed strong chassis of the machine enables long life production without errors. Produced materials can be carried to drying area with carriage carts or forklifts. The products can be carried to drying area with carriage carts or forklifts.

Condition: excellent (used), Year of construction: 2021, functionality: fully functional, For sale: a GEVO SE5-2E/Z machine for window frame manufacturing. The machine was purchased for a specific project that was ultimately not carried out. It was used only a few times, and therefore is in very good working condition. It has been used sporadically since its purchase. Data from the nameplate: Manufacturer: GEVO Type: SE5-2E/Z Serial number: 571 Year of manufacture: 2021 Working pressure: 7 bar Ncodpjy T Eu Hofx Adpou Speed: 2500 rpm Country of manufacture: Germany The machine comes from Stolpex – machinery for windows. Selling as used. Condition as shown in the photos. It can be inspected before purchase, by prior arrangement. The machine is ideal for a company involved in the production or processing of window frames.

Year of construction: 2021, condition: used, functionality: fully functional, Impact nut driver for large flanges, suitable for M6 or M8 nuts. Ncsdpfx Aezbu R Eodpju Capable of processing up to 2,500 nuts per hour.

Condition: used, Year of construction: 1991, machine/vehicle number: 113307651086088, functionality: fully functional, cutting height (max.): 260 mm, total height: 2,100 mm, total length: 2,200 mm, total width: 2,100 mm, saw band length: 4,115 mm, saw band width: 38 mm, The Kasto SSB 260 VA is a fully automatic bandsaw machine designed for precise serial cuts of solid material, pipes, and profiles. It stands out for its compact design and high cutting accuracy. The machine features hydraulic workpiece clamping, automatic feed, and a coolant system. Additionally, a chip conveyor is integrated to increase efficiency. Cutting range round: 10 – 260 mm Cutting range square: 260 x 260 mm Ncedpfswqw Tvsx Adpeu Smallest cut-off length: 5 mm Single feed: 600 mm Multiple feed: max. 5,400 mm Cutting speed: 15 – 125 m/min (stepless) Saw blade dimensions: 4,115 x 38 x 1.3 mm Drive power: 4 / 6.5 kW Machine weight: 2,110 kg Machine dimensions (LxWxH): approx. 2,160 x 2,080 x 2,015 mm

Year of construction: 2025, condition: new, functionality: fully functional, The DANIBRUM SIP series of brush sanders is a complete solution for the professional finishing of wood, MDF, milled or composite panels. Comprising the SIP610, SIP810, SIP813 and SIP1013 models, the range covers the varied requirements of processing workshops and medium and large industrial units SIP610 is an automatic brush sander, designed with state-of-the-art technology to perform finishing processes on flat and profiled surfaces with maximum precision. The equipment is ideal for rounding off sharp edges, cleaning the surface of fine dust, as well as preparing for painting or varnishing Whether used in a medium-sized workshop or in an industrial line, the SIP610 offers a constant output and a uniform quality of finish, with a minimum of manual interventions The high-quality brushes apply a controlled and adaptable pressure, which allows for the effective removal of imperfections without damaging the material Equipped with a PLC control system and a touch screen interface in Romanian, the SIP610 is easy to use, even for less experienced operators. Predefined programs allow rapid adaptation to different types of materials Thanks to SICK brand encoders and the electrical adjustment system of the working groups, extremely precise positioning can be achieved, with deviations of only 0.1 mm From solid wood to MDF or composite panels, the SIP610 can be successfully used for a variety of applications, offering consistent and superior results Individual electrical adjustment for each sanding group, which allows fine setting depending on the material Rotating discs with double direction of rotation and oscillation, for complete coverage of the workpiece Synchronized oscillation drums, which contribute to uniform contact with the workpiece surface Fast Release system for sanding discs The groups can be extracted laterally, making maintenance and brush changes easier Rubberized feed belt with increased grip, with milled profile for optimal traction Toothed belt transmission and oscillation reducer, which reduces vibrations and noise Linear guides with recirculating balls for smooth and precise movements Schneider electrical components and XINJE frequency converters, guaranteeing reliability and constant control Ergonomic swivel control panel, allowing intuitive operation from multiple positions LED light for increased visibility in the work area Built on a solid metal structure, the SIP610 is designed to withstand demanding industrial environments. The 4 vertical cylinders supporting each sanding group ensure evenly distributed pressure, which helps reduce wear While the SIP610 is recommended for medium-sized workshops or industrial spaces with constant production flow, the SIP810, 813 and 1013 are designed for complex requirements or large work volumes The models in the SIP range are equipped with similar digital control technologies, efficient exhaust systems and industrial-quality components The SIP610 model, with automated functions, precision control and adaptability to various types of panels, is a reliable partner in any production environment. By expanding the range with the SIP810, SIP813 and SIP1013 models, the SIP series completely covers the needs of a modern wood industry Nsdpfx Aewgw Tzodpscu Technical support in Romanian - English - German

Condition: good (used), Year of construction: 2002, functionality: fully functional, input voltage: 400 V, type of input current: three-phase, automatic Lisec butyl application machine, left to right, year 2002, consisting of: FRS-25Z, overhead frame conveyor for supply RZVS-25/25, frame lift (down to butyl machine level), including frame measuring device LBH-25AR, automatic butyl application machine, 2x7,5 kg butyl cylinder capacity, suitable also for Georgian bars Ncjdsy Uaxpjpfx Adpou RAVS-25/25, frame lift FRS-25A, overhead frame conveyor down to frame set section The machine is available from our stock in Hofkirchen/Austria and can be seen there on appointment.

Condition: like new (used), Year of construction: 2024, operating hours: 100 h, functionality: fully functional, machine/vehicle number: 2024-A00280, feed length X-axis: 10,000 mm, feed length Y-axis: 4,000 mm, feed length Z-axis: 100 mm, warranty duration: 12 months, total length: 11,000 mm, total height: 2,000 mm, total width: 4,500 mm, overall weight: 2,500 kg, type of input current: three-phase, Equipment: CE marking, Semi-automatic framing machine for timber frame walls, max. 4000x10000mm - Max. stud height: 220mm - 3 nailing positions along the height - 2 BEA nail guns, strip-fed nails - Wall length production: 1000mm to 10000mm - Wall width production: 600mm to 4000mm - Wall height production: 120mm to 220mm - 2 independent nailing stations (no beams) - HIWIN rail and guide system - LENZE motor - LENZE PLC Ncjdpfx Adjzap I Ajpju - Human-Machine Interface (HMI) - Control panel - Manufacturer's warranty: 12 months - Installation and commissioning possible

Condition: good (used), Year of construction: 2003, functionality: fully functional, automatic Lisec butyl application machine LBH-25AS, additionally to standard frames also useable for Georgian bar frames, consisting of: - RFVS-25/25, inlet conveyor - LBH-25AS, automatic butyl application machine - RAVS-25/25, automatic frame lift Nsdpfx Asy T Ivmjdpecu - FRS-25A, automatic overhead frame conveyor As a completion to a full automatic spacer frame butyl application line we also have following machines available: - RFVS-25/25U, inclination changer from +6° to -6° - A2RL-25/25RN, year 2001, full automatic desiccant filling machine for profiles with 6-24 mm width All machines are available from our stock and can be seen in our warehouse in Hofkirchen/Austria