Used Band Filter System for sale (43,757)

Condition: used, Year of construction: 2010, Edge banding machine Manufacturer: Brandt Type: Optimat KTD 720 Year of manufacture: 2010 Note: The technical data and descriptions are a transcript of the original order confirmation. The data is for informational purposes only and is not binding. Pedpfxjzuzlbo Ap Hjgr

Condition: used, Year of construction: 2000, Edge banding machine, single-sided Manufacturer: OTT Type: Pacific V 6-F Year of manufacture: 2000 Technical data: Edge thickness: 0.2 - 6 mm Workpiece thickness: 8 - 42 mm Workpiece width: min. 70 mm Workpiece length: min. 0 mm Feed speed: 12 m/min Electrical connection: 3 x 400 V, 50 Hz Extraction: 2 x 120 mm at 20 m/s Pgsdpfx Apezuyh Us Hor Extraction capacity: m³/h Equipment, processing units: Edge trimming 2 x 1.5 kW, 12,000 rpm, 200 Hz two tool-controlled spindles Gluing unit Rapid heating tank with Melt-matic automatic edge magazine with optical monitoring for strip edges in fixed lengths Release agent spraying device Cutting unit 2 x 0.2 kW, 12,000 rpm, 200 Hz automatic pivoting 0 / 3 Flush trimming unit x 0.43 kW, 12,000 rpm, 200 Hz Radius trimming unit R2 - R5 2 x 0.3 kW, 12,000 rpm, 200 Hz 2 quick-change stations for trimming units Corner rounding trimming unit 2 x 0.3 kW, 12,000 rpm, 200 Hz Scraper blade 2 x carbide scrapers Smoothing unit 2 x 0.2 kW, 2,800 rpm, 50 Hz Weight: 2,000 kg Note: The technical data and descriptions are copies of the order confirmation from that time. The information is provided for informational purposes only and is not binding.

Condition: used, Year of construction: 2019, Edge banding machine Manufacturer: SCM Type: Minimax E10 Year of manufacture: 2019 Technical data Edge thickness (strip material): 0.4 - 3.0 mm Edge thickness with shear cutter at 80 mm edge height: 0.4 - 1.5 mm Edge thickness with shear cutter at 50 mm edge height: 0.4 - 2.5 mm Edge thickness with shear cutter at 45 mm edge height: 0.4 - 3.0 mm Edge height: 10 - 84 mm Workpiece thickness: 8 - 80 mm Minimum workpiece width: 50 mm Minimum edge length: 210 mm Minimum inner radius (concave) at 0.4 mm edge: 25 mm Minimum outer radius (convex) at 0.4 mm edge: 5 mm Feed speed: 4 / 8 m/min Processing temperature: 140 - 220 °C Edge feed Integrated shear cutter for cutting edge material from the roll. Roll table for holding roll material. Suitable for ABS edges, melamine edges, veneer edges, and other pre-fabricated edge strips. Gluing system Teflon-coated glue tank below the table top. Continuous glue circulation to prevent glue deposits. Fast heating time of approx. 7 minutes. Standby function with timer. Glue tank capacity: 1.5 liters. Pgedpjzuykpjfx Ap Hsr Pressure system Motor-driven glue application roller. One free-running pressure roller. Foot pedal for start and stop control of the working cycle. Note: The technical data and descriptions are copies of the original order confirmation. The information is provided for informational purposes only and is not binding.

Condition: used, Year of construction: 2017, Edge banding machine Manufacturer: SCM Type: Olimpic K360 T-ER1 Year of manufacture: 2017 Technical data - Feed speed: 11 m/min - Edge thickness: 0.4 - 6 mm - Control: SCM control panel with display - Board thickness: 8 - 60 mm - Power supply: 400 V / 3~ / 50 Hz, 23 A - Min. workpiece: 140 x 90 mm Units Pre-milling - 2 counter-rotating diamond heads (up to 3 mm removal) EVA gluing unit Pressure zone with driven roller + 2 pressure rollers End trimming unit K-2 (straight / beveled, automatic switching) Flush trimming - flush, radius, chamfer Corner rounding R1/R2 Profile + surface scraper blade Polishing unit Anti-adhesive liquid system (2 liquids), edge roller feed Note: The technical data and descriptions are copies of the original order confirmation. The information is provided for informational purposes only and is not binding. Podezuyk Njpfx Ap Hegr

Condition: used, Year of construction: 2018, machine/vehicle number: 1743, functionality: fully functional, operating hours: 36,725 h, power: 6 kW (8.16 HP), table width: 2,000 mm, table length: 4,000 mm, total length: 12,000 mm, total width: 3,000 mm, overall weight: 14,250 kg, Condition The machine is in used, fully functional condition and is currently still in operation. No known defects are present. Pgsdpfx Apszhmh Is Hjr Scope of supply The scope of supply includes: ByTrans loading system for automatic loading and unloading Existing documentation and operating manual Small quantity of wear parts Location and inspection Location: ASCO Anlagenbau Inspection: Possible by appointment Loading: Possible Availability: By agreement

Condition: used, Year of construction: 2010, 1. Edge banding machine Manufacturer: Homag Pgsdpfx Aszuyilop Hjr Type: KAL 210 Ambition 2264 Year of manufacture: 2010 Technical data Release agent spraying system Joint milling unit (2 x 4 kW) Glue application A20 (granule/quick-melt system) Pressure zone with driven pressure rollers Miter saw HL84 (2 motors) Flush-/radius-/chamfer milling unit BF10/BF20 Corner copying unit FK11 (2 motors) Profile drawing blade PN10 Straight drawing blade for glue joint Buffing unit (polishing) Release agent and cleaning agent spraying system at the outfeed Note: The technical data and descriptions are copies of the original order confirmation. The information is provided for informational purposes only and is not binding.

Condition: used, Year of construction: 2017, Edge banding machine Manufacturer: Biesse Type: Jade 240 Year of manufacture: 2017 Technical data Pgsdpfx Apjzuyixo Hjr Note: [b]The technical data and descriptions are copies of the original order confirmation. The information is provided for informational purposes only and is not binding.[/i]

Condition: used, Year of construction: 2006, - Edge milling unit 2 x 2.2 kW - Combi-melt gluing unit - Automatic edge magazine - Trimming unit 2 x 0.8 kW - Flush trimming unit 2 x 0.7 kW - Fine milling unit 2 x 0.3 kW - 2 quick-change sets for fine milling - Automated copy milling unit 2 x 0.37 kW - 2 pull blades - 2 surface pull blades - 5-way spraying system - Fine buffing unit with cloth disc 2 x 0.2 kW Edge banding machine Manufacturer: OTT Type: Twister Technical data: Glue application: Hot-melt adhesive application roller with simultaneous and counter-rotating action Edge thickness: 0.3-10 mm Workpiece thickness: 8-60 mm Workpiece width: 70 mm - Minimum Workpiece length: 150 mm - Minimum Operating pressure: 6 bar Feed power: 3.0 kW Feed speed: 14-20 m/min. Pgodpfx Apezuyifo Hor Electrical connection: 3 x 400 V, 50 Hz Extraction: at 20 m/s, 1 x 180 mm diameter = 35 m³/min. Air velocity: 20 m/s - Minimum Compressed air consumption: 300 liters/min. (approximate value) Equipment - Machining units: Joining: - 2 x 2.2 kW, n=14600, 250 Hz, two individually controlled spindles. Combi-melt gluing unit: - Top-mounted gluing unit with interchangeable hopper for processing EVA, PUR hot-melt adhesives, or standard cleaning granules, hopper volume 2.5 l Edge magazine: - Automatic edge magazine with optical monitoring for strip edges in fixed lengths Trimming: - 2 x 0.8 kW, n=12000, 200 Hz, automatic pivoting 0 / 5, 2 HM saw blades, 140 x 3.2 x 16 mm, z=34 Flush trimming: - 2 x 0.7 kW, n=12000, 200 Hz, single-sided, with 2 HM reversible blade cutter heads HF70, 70 x 20 x 16 mm, z=4 Fine milling (chamfer 15 / 30 / 45): - 2 x 0.3 kW, n=12000, 200 Hz, double-sided, with 2 HM reversible blade cutter heads HF70, 70 x 20 x 16 mm, z=4 AWSR (radius R2-R5): - 2 quick-change sets for fine milling, 2 x 0.3 kW, with 2 HM reversible blade cutter heads AR73 x 16 x 16 mm, z=3, R2-R5 Copy milling: - Automated copy milling with two separate spindles for machining end faces and longitudinal radii. Motor power: 2 x 0.37 kW, 12000 rpm, Tools: R1 - R3 Pull blade: - 2 HM pull bars, automatically adjustable Surface pull blade: - 2 HM pull bars with fine adjustment PU set: - 5-way spraying system, 2 x release agents, 1 x lubricant, 2 x cleaning agents, fine buffing unit with cloth disc Edge finishing: - 2 x 0.2 kW, n=2800, 50 Hz, oscillating brushes Note: The technical data and descriptions are copies of the original order confirmation. The information is provided for informational purposes only and is not binding.

Condition: used, Packaging system Pgjdpfx Ajzuz Suop Hjr Manufacturer: Mosca

Condition: used, Year of construction: 1990, Paint/coating application system Manufacturer: Bürkle Type: DAL 1 1300 Year of manufacture: 1990 Note: Pgsdezuzqdspfx Ap Hor The technical data and descriptions are transcriptions from the original order confirmation. The data is for informational purposes only and is not binding.

Condition: excellent (used), Year of construction: 1997, functionality: fully functional, Year of manufacture 1997 Volume flow 2950 m³/h Pgjdpjv A Rv Aofx Ap Hsr 200 mm suction nozzle Motor 3.7 KW, 400 Volt Technically in very good condition

Condition: excellent (used), Year of construction: 2019, functionality: fully functional, machine/vehicle number: AA100264-11 / AA100264-12, travel distance X-axis: 2,000 mm, travel distance Y-axis: 920 mm, travel distance Z-axis: 635 mm, feed length X-axis: 2,000 mm, feed length Y-axis: 920 mm, feed length Z-axis: 635 mm, feed rate X-axis: 90 m/min, feed rate Y-axis: 60 m/min, feed rate Z-axis: 60 m/min, nominal power (apparent): 25 kVA, controller manufacturer: Siemens, controller model: 840 D, overall weight: 28,000 kg, spindle speed (min.): 20,000 rpm, spindle speed (max.): 20,000 rpm, spindle motor power: 25 W, number of spindles: 2, number of slots in tool magazine: 31, Equipment: chip conveyor, documentation/manual, BAZ and extrusion profile system for the production of car sill profiles Pgsdpoyzh Ulofx Ap Hjr consisting of: *Machining machines: - Anger machine SP2-X2000 (machine number AA100264-11) - Anger machine SP2-X2000 (machine number AA100264-12) - 2x coolant treatment units *Subassembly assembly (robot cell for sills): - Robot 1 KUKA KR120 R3200 PA - Gripper for robot 1 - Labeling station - Robot 2 KUKA KR120 R3500 - Gripper for robot 2 - Interface robot/machining center - Cleaning unit for components - Assembly machine, 2 lines - Robots 3 and 4 for handling - Drawer system with component inserts - Screwing station - Adhesive application station - Platform - Robot 5 - Gripper for robot 5 - Pallet placement station - Safety enclosure - Electrical control and integration Further information and videos available upon request.

Condition: used, Year of construction: 2021, - Edge joining unit - Teflon-coated gluing unit - Miter saw unit - Multifunction milling unit x-motion PLUS, flush and radius milling unit - Edge processing unit - Radius grooving unit - Polishing unit Edge banding machine Manufacturer: Felder Format4 Type: Tempora60.06LX Year of manufacture: 2021 Technical data Control system: x-motion PLUS Chain feed Feed speed: 10 m/min Pjdpfxezuyh Ie Ap Hjgr Drive motor: 0.75 kW (S6) - 1.1 kW (S6) Minimum workpiece length: 140 mm Minimum workpiece width: 70 mm The minimum workpiece width varies depending on the workpiece length, height, and surface texture. Rotary table edge magazine for edge banding material Diameter of the rotary table: 750 mm Edge thickness: 0.4 - 3 mm Pull-out frame Pull-out workpiece support, extendable up to 450 mm Upper pressure bar Manually adjustable workpiece height: 8 - 60 mm Edge feeder for edge banding and strip material Edge joining unit: 2.2 kW, diamond cutter Z2 Speed: 12,000 rpm, 2 x 1.1 kW Teflon-coated gluing unit for 1.5 kg of EVA or PUR granules Ready for use after only 10 minutes of heating time Tool-free quick-change system Pressing unit, pneumatically controlled 1 driven and 2 tapered pressing rollers form the pressing zone Shear cutter for edge banding material, 0.4 - 3 mm thickness Miter saw unit with two high-frequency motors 0.35 kW, 12,000 rpm Pneumatically swiveling 0 - 10 degrees Multifunction milling unit x-motion PLUS, flush and radius milling unit 1 high-frequency motor above and below, 0.75 kW, 12,000 rpm, each with 4 interchangeable cutters Edge processing unit For soft-forming and post-forming workpieces, for processing the end edge with 0.4 - 3.0 mm edge thickness and 10 - 60 mm workpiece height 2-axis motor-controlled radius grooving unit including pneumatic retraction function Polishing unit Above and below Note: The technical data and descriptions are copies of the original order confirmation. The information is provided for informational purposes only and is non-binding.

Condition: excellent (used), Year of construction: 1970, functionality: fully functional, Horizontal band saw from Nobis, manufactured in 1970 The saw is fully functional and has a cutting width of approximately 1.2 m. It features its own carriage with a width of 1.15 m and a length of 10 m. Equipped with a mechanical log clamp. A sharpening device can also be offered if required. We have other used band saws available: 1.) Wehrhahn horizontal saw 145 Used, fully functional Cutting width: max. 145 cm, logs up to approx. 1.70 m can be cut Dimensions of saw carriage: 8 m length x 133 cm width (overall width: 155 cm) With 6 mechanical clamping devices Drive: 30 kW motor Circular saw attachment for core separation available Price: €23,900 Optional extras: Complete sharpening room: €9,500 Replacement gearbox: €2,000 Swivel crane: €5,000 2.) Nienkemper BS0 horizontal band saw from 1955 In good working condition Frame width: 130 cm Blade guide width: 121.5 cm Cutting capacity: Logs up to 115 cm without turning Pgjdpfx Ajyk D Dmop Hjr Theoretically up to 120 cm without turning Larger diameters possible by turning the log Solid, stable frame construction for easy installation Wheels: 1050 mm x 110 mm Includes: Newly rebuilt carriage (1.20 x 6.00 m) New axles Overhauled clamping clamps Price: €29,900 If you are interested, please feel free to contact us. Prices can be negotiated by phone. Shipping is possible upon request.

Condition: good (used), Description Used band saw machine Year of manufacture: 2006 Technical specifications: Cutting speed: 40/80 m/min Saw band: 3320x27x0.9 mm Cooling: liquid/mist lubrication CAPACITIES: 0° - 300 mm Ø - 260 mm square - 330 x 260 mm 45° left - 260 mm Ø - 250 mm square - 270 x 200 60° left Pgjdjzu R Dtjpfx Ap Hjr - 180 mm Ø - 170 mm square 45° right - 200 mm Ø - 180 mm square - 200 x 160 mm

Condition: used, Year of construction: 2011, Used Equipment Year of Manufacture: 2011 Condition: Currently installed Equipment and Technical Data: -Filter housing base ring NFHSU 9/9 with discharge chute for press - Discharge: 1.1 kW - Storage volume in the base ring approx.: 3.25 m³ - Dimensions L x W x H (incl. base ring) 2440 x 2440 x 900 mm - Ground clearance: 350 mm - Conveyor screw for briquetting press 0.75 kW - Extension and expansion rings are optional; max. storage volume approx. 12 m³ - Extension and injection ring NFHSU for 9/9 and 10/10 Jet, L x W x H: 2480 x 2480 x 500 mm - Expansion ring for NFHSU 9/9, 2480x2480x700 mm, with inspection door and type-tested explosion flap - Filter for filter housing NFHSU 9/9/20, filter area 116 m²: The Nestro filter system NFHSU is a solid filter construction made of 4 mm galvanized steel sheet and is designed for outdoor installation and weather resistance. This filter system is particularly robust and designed for underpressure operation up to -3,500 Pa. The filter system is equipped with upper and lower inspection doors 600 x 600 mm, with automatic filter regeneration, dry extinguishing system, differential pressure switch / volumetric flow monitoring and the necessary explosion protection. Note: Filter is equipped with high-quality filter material, BIA category M, antistatic, residual dust content < 0.1 mg/m³ and suitable for return air operation. Further technical data: - Filter tube length: 2,000 mm - Filter tube diameter: 230 mm - Number of filter tubes: 81 - Filter area: 116.0 m² - Filter regeneration: automatic/motorized - Number of vibrating motors: 4 pcs - Fan shroud for NFHSU 9/9 including inspection door - Fan US-FHN (clean gas) 22 kW 16,400 m³/h - 3,200 Pa: A Nestro high-performance fan with above-average efficiency and high energy saving potential when using a frequency inverter (optional). The robust welded construction is primed and painted in RAL 5015. The fan is delivered as standard with an inlet cone and backflow damper. Technical data at a glance: - Volumetric flow: 16,400 m³/h - Corresponding underpressure: 3,200 Pa - Electric motor: 22 kW / 400 Volt / 50 Hz - Speed: 3,000 rpm - Design: B5 - Pressure nozzle: without - Application area: Nestro underpressure filter and others - Injection nozzle d= 400 mm with flange ring - Injection nozzle d= 350 mm with flange ring - Backflow damper d= 350 mm with flange edge - Backflow damper d= 400 mm with flange edge - Briquetting press C150; 30 - 50 kg/h, hydraulic unit 5.5: Pjdpozvz Tbofx Ap Hogr Technical data: - Power consumption (hydraulics): 5.5 kW - Briquette diameter: 50 mm - Weight: 650 kg - Briquetting performance with a bulk density of approx. 250 kg/m³, material-dependent: 30 - 50 kg/h - Ground clearance with base frame (art. no. 710300): 350 mm - Briquetting press, dust-proof - Briquetting press complete with hydraulic solenoid valve control for automatic operation, oil tank with 100 l oil, in welded construction, including main cylinder, stuffing cylinder, gripper cylinder, pressing jaw, electrical control panel with fully automatic control and 5 m cable The press is standardly equipped with: Monitoring switch for oil temperature, hardened press bushing, connection part for briquette line and automatic briquette length adjustment

Condition: good (used), mileage: 6,95,300 km, power: 368 kW (500.34 HP), first registration: 05/2019, fuel type: diesel, tire size: 385/55R22,5, axle configuration: 6x2, wheelbase: 4,800 mm, fuel: diesel, brakes: retarder, color: blue, driver cabin: sleeper cab, gearing type: automatic, number of gears: 12, emission class: euro6, suspension: air, total length: 9,000 mm, total width: 2,550 mm, total height: 3,920 mm, Year of construction: 2019, Equipment: ABS, Bluetooth, air conditioning, central locking, cruise control, electric window regulation, navigation system, parking air conditioner, parking heater, power mirror, retarder, seat heater, traction control, trailer coupling, - Heated mirrors - Digital tachograph - Driver's log (recording device) - Fixed - Halogen lamp - Alloy wheels - Manual - Radio/cassette - Sleeper cab - Lane departure warning system - Auxiliary braking system Number of axles: 3, Configuration: 6x2, Unladen weight: 11700 kg, Gross vehicle weight: 26000 kg, Total tank capacity: 590 liters, Tow hitch, Axle journal pin diameter: 40 DIN, Chassis height: 96 cm, Fifth wheel coupling: Fixed, Number of locks: 1, Winch pulling capacity: 590 tons, Alloy wheels, Suspension type: Air suspension, Cab type: Sleeper cab, Cruise control, Driver's log (recording device), Digital tachograph, Air conditioning, Parking air conditioning, Auxiliary heater, Electric windows, Electric mirrors, Radio/cassette, GPS navigation, Color: Blue, Heated mirrors, Lighting type: Halogen lamp, Lane departure warning system, Air conditioning, Seat heating, Bluetooth, Engine power: 368 kW (493 Hp), Fuel: Diesel, Euro: 6, Transmission type: AS-Tronic, Transmission type: Traxon, Gears: 12, Auxiliary braking system, Retarder brand: Intarder, Power steering, ABS, ASR, Central locking, Seat arrangement: 1+1, Seat cover: Leather, Seat adjustment: Manual Transmission Transmission: TRA, 12 gears, Automatic Axle configuration Brakes: Disc brakes Suspension: Air suspension Axle 1: Tire size: 385/55R22.5; Steerable; Tire tread depth left: 6 mm; Tire tread depth right: 7 mm Axle 2: Tire size: 315/70R22.5; Double tires; Tire tread depth left inner: 4 mm; Tire tread depth left outer: 6 mm; Tire tread depth right inner: 3 mm; Tire tread depth right outer: 4 mm Axle 3: Tire size: 385/55R22.5; Lift axle; Steerable; Tire tread depth left: 7 mm; Tire tread depth right: 8 mm Weights Unladen weight: 11,700 kg Payload: 14,300 kg GVW: 26,000 kg Interior Upholstery: Leather Condition Technical condition: good Optical condition: good Damage: none Number of keys: 1 Pgsdpfx Apozkf Huo Her Financial information Leasing price: €371 per month (default, 60 months); Ask for more information and conditions Identification License plate: KLEYN1 Kleyn Trucks is one of the world's largest independent used vehicle dealerships. Here you can choose from a constantly changing stock of 1200 used trucks, tractor units, and trailers. Our offer includes all European brands from various years of manufacture and price ranges. Why buy from Kleyn Trucks? Simple! • Large, rapidly changing stock • Recognizable quality • A good price • Proper business practices • We speak many languages • We understand our customers • Support with import and transport • (Export) registration can be arranged quickly • Expert technical services • The security of "recognizable quality" • And more.... Please visit our website for special offers and a complete inventory: Leasing through Kleyn Trucks is possible in most European countries! Quickly calculate your leasing rate and send an inquiry via our website. Ask directly about our European warranty package.

Year of construction: 2018, condition: used, overall weight: 10,000 kg, total length: 2,300 mm, total width: 6,500 mm, total height: 2,400 mm, BUDERUS CNC 235 – CNC Grinding and Machining Center Machining / Spindle 2 machining areas / channels Max. machining length: 150 mm Max. swing diameter: Ø 310 mm Workpiece spindle speed: 0–3,000 rpm Spindle bore: Ø 45 mm Workpiece spindle positioning via C-axis Table speed X/Z: 0–30 m/min Motor Spindle WMZ / DVS Type: GS 205-045/17 Year of manufacture: 2014 Automation Automatic workpiece feed / conveyor system Coolant / Filtration System LIQUI-Filter GmbH System: UR1060 / MW260 / Gamma 13 Tank capacity: 2,400 l Pjdpjzwa Rhsfx Ap Hogr Year of manufacture: 2015 Cooling System HYFRA gamma 13-F-S Cooling capacity: 13 kW at 32 °C Year of manufacture: 2015 Measuring Technology JENOPTIK post-process measuring technology Year of manufacture: 2018 Supply Data 3 × 400 V / 50 Hz Installed power: approx. 45 kW Compressed air requirement: 15 Nm³/h at 5 bar Control: Siemens SINUMERIK 840D Travel Z-axis: 300 - mm Workpiece diameter over bed max.: 150 mm Weight approx.: 10,000 kg Dimensions (LxWxH) approx.: 2300 x 6500 x 2400 mm Travel X-axis: 1240 - mm Year of construction: 2,018 Condition: good Terms of payment: 100% prepayment before pick-up Terms of delivery: Free loading on truck under power: No

Condition: good (used), mileage: 3,74,226 km, power: 390 kW (530.25 HP), first registration: 05/2023, fuel type: diesel, tire size: 385/55R22,5, axle configuration: 6x2, wheelbase: 4,900 mm, fuel: diesel, brakes: retarder, color: blue, driver cabin: day cab, gearing type: automatic, number of gears: 12, emission class: euro6, suspension: air, total length: 9,830 mm, total width: 2,550 mm, total height: 4,000 mm, Year of construction: 2023, Equipment: ABS, Apple CarPlay, Bluetooth, air conditioning, central locking, cruise control, electric window regulation, navigation system, parking heater, power mirror, retarder, seat heater, traction control, trailer coupling, - Heated mirrors - Digital tachograph - Trip recorder (control unit) - Fixed - High roof - Manual - Radio/cassette - Lane keeping assist - Fabric - Blind spot sensor - Xenon lamp - Auxiliary braking system Number of axles: 3, Configuration: 6x2, Unladen weight: 10010 kg, Gross vehicle weight: 26000 kg, Total tank capacity: 630 liters, Trailer coupling, Axle pin diameter: 40 DIN, Fifth wheel coupling: Fixed, Number of locks: 1, Suspension type: Full air, Type of cab: High roof, Cruise control, Trip recorder (control unit), Digital tachograph, Air conditioning, Number of airbags: 1, Auxiliary heater, Electric windows, Electric mirrors, Radio/cassette, Carplay, GPS navigation, Color: Blue, Heated mirrors, Mirror camera, Lighting type: Xenon lamp, Lane keeping assist, Air conditioning, Seat heating, Bluetooth, Blind spot sensor, Engine power: 390 kW (523 hp), Fuel: Diesel, Euro: 6, Transmission type: Telligent, Transmission type: Mercedes Benz, Gears: 12, Auxiliary braking system, Retarder brand: Voith, Power steering, ABS, ASR, Starter battery, Rotation direction: 1x20, System length: 80 cm, Central locking, Seat configuration: 1+1, Seat cover: Fabric, Seat adjustment: Manual, LAST AXLE STEERING / VOITH OIL RETARDER / WHEELBASE 490 / LED / NAVI / MULTI WECHSLER Transmission Transmission: MB, 12 gears, Automatic Axle Configuration Brakes: Disc brakes Suspension: Air suspension Axle 1: Tire size: 385/55R22.5; Steered; Tire tread depth left: 10 mm; Tire tread depth right: 11 mm Axle 2: Tire size: 315/70R22.5; Double tires; Lift axle; Tire tread depth left inside: 6 mm; Tire tread depth left outside: 7 mm; Tire tread depth right inside: 5 mm; Tire tread depth right outside: 6 mm Axle 3: Tire size: 315/70R22.5; Lift axle; Steered; Tire tread depth left: 14 mm; Tire tread depth right: 13 mm Weights Unladen weight: 10,010 kg Payload: 15,990 kg GVW: 26,000 kg Functional Loading platform height: 111 cm Condition Technical condition: good Optical condition: good Damage: none Number of keys: 1 Financial Information Leasing price: 1,108 € per month (default, 72 months); Please inquire for further information and conditions Identification Registration number: KLEYN1 Kleyn Trucks is one of the world's largest independent dealers in used vehicles. Here you can choose from a constantly changing stock of 1200 used trucks, tractor units, and trailers. Our range includes all European brands and model years at various price points. Why buy from Kleyn Trucks? Simply! • Large, rapidly changing stock • Recognizable quality • A good price • Correct business practices • We speak many languages • We understand our customers • Assistance with import and transport • (Export) registration is quickly arranged • Expert technical services • The security of "recognizable quality" • And more.... Please visit our website for special offers and a complete inventory: Pgedpfx Apoy Ni Ehe Hor Leasing through Kleyn Trucks is possible in most European countries! Calculate your leasing rate quickly and submit an inquiry via our website. Feel free to ask directly...

Condition: good (used), Technical data for the pallet racking system: Racking system: Jung Heinrich Type: Esmena Technical data for the installation: Number of racking bays: 01 unit Length per racking bay: 19,559 mm Number of fields per racking bay: 07 units Number of levels including base level: 02 units Technical data for the volume: Pallet spaces per field: 09 units Number of pallet spaces per bay: 63 units Total number of pallet spaces: 63 units Based on: Load handling equipment: Euro pallet EN 13698-1 Dimensions: 1,200 x 800 x 150 mm Overall height including pallet: n.d. Weight per pallet (max.): approx. 800 kg Included in the scope of supply: 08x Pallet racking uprights, used Material color: green Frame profile: M94 Profile dimensions: 76.2 x 74.7 x 2.3 mm including cross and diagonal braces, base plates The uprights are pre-assembled (bolted framework) Height: 2,710 mm Depth: 1,050 mm 28x Pallet racking beams, used Material color: yellow Box profile: 116 x 40 mm Pedpfx Ajzu Nwrsp Hogr Beam type: GNA 116x40 SEG5 Connector: 5 hooks clear width: 2,707 mm max. load per pair of beams 2,400 kg, with evenly distributed load. 56x Locking pins, used Material color: Sendzimir galvanized For securing the longitudinal beams against unintentional lifting out 32x Bolt anchors, new Manufacturer: Hilti Type: HST2 M12x105/10 Design: Carbon steel, galvanized Approved for: cracked concrete 16x Shims, used Design: completely galvanized for leveling the racking uprights that are installed on uneven ground 01x Load sign with information on field and bay loads, manufacturer and order number Dimensions: 420 x 297 x 3 mm Your contact persons in our company: Mr. Andre Evering Mr. Mario Klöver Mr. Falk Deutsch General information about the item: This item is only offered for collection. Any additional transport or shipment of this item will incur additional costs, which can be requested separately from us depending on the delivery location or scope of delivery.

Condition: used, mileage: 7,18,000 km, power: 340 kW (462.27 HP), first registration: 04/2016, fuel type: diesel, tire size: 385/65 R 22.5, axle configuration: 8x2, wheelbase: 6,100 mm, fuel: diesel, driver cabin: sleeper cab, gearing type: mechanical, emission class: euro6, suspension: steel-air, total length: 8,800 mm, total width: 2,550 mm, Year of construction: 2016, Equipment: ABS, AdBlue, air conditioning, central locking, cruise control, electric window regulation, parking heater, spoiler, trailer coupling, = Additional Options and Accessories = - Aluminum fuel tank - Roof spoiler - Digital tachograph - Lift axle - Refrigerator - PTO (power take-off) - Sun visor - Towing hitch = Further Information = Technical Information Number of cylinders: 6 Engine displacement: 12,902 cc Axle Configuration Front axle 1: Tire size: 385/65 R 22.5; Steering axle; Tire tread left: 20%; Tire tread right: 20%; Suspension: leaf suspension Front axle 2: Tire size: 385/65 R 22.5; Steering axle; Tire tread left: 10%; Tire tread right: 10%; Suspension: air suspension Rear axle 1: Tire size: 295/80 R 22.5; Twin tires; Inner left tread: 30%; Outer left tread: 30%; Inner right tread: 30%; Outer right tread: 30%; Reduction: single reduction; Suspension: air suspension Rear axle 2: Tire size: 295/80 R 22.5; Tread left: 10%; Tread right: 10%; Reduction: single reduction; Suspension: air suspension Weights Curb weight: 14,282 kg Payload: 21,718 kg Gross vehicle weight (GVW): 36,000 kg Pgedpfx Ajzvcrrsp Hjr Condition Damages: none

Year of construction: 2011, condition: used, Used Hauzer Techno Coating HTC-1500/4-SpuUC/2-Spu/1-P coating system for sale, manufactured in 2011. Second-hand industrial coating equipment for manufacturing applications. Industrial system for sale for international buyers seeking used Hauzer coating systems, surface treatment equipment, coating machinery, and manufacturing equipment through an industrial auction. Pgjdpfozwfiiex Ap Hsr

Year of construction: 2000, condition: excellent (used), According to customer order for sale: - Complete trimming system EWD Combimes with Sage Model DK 90 TL - Produced in 2000. - With sorting roller conveyor, 6 removal points. Pgsdpfxjvt Rlxj Ap Hsr System already dismantled. Very good condition.

Condition: used, mileage: 4,19,000 km, first registration: 03/2007, fuel type: diesel, axle configuration: 4x2, fuel: diesel, color: green, driver cabin: day cab, gearing type: mechanical, emission class: euro4, Year of construction: 2007, Equipment: air conditioning, spoiler, = Additional Options and Accessories = - Leaf spring suspension - Roof spoiler - Sun visor = Notes = Tam roll-off tipper system, 14 tons (T14-52) – manually extendable underrun protection – support roller – air conditioning – permissible gross weight 18,000 kg – unladen weight 8,130 kg – wheelbase 5,000 mm = Further Information = Intended use: Horticulture Front axle: Steered GVWR: 18,000 kg Reference number: 24 Pjdpfxjzlqd Uj Ap Hjgr = Company Information = We are located between Antwerp and Brussels along the A12 motorway, near the port of Antwerp. Opening hours: Monday to Friday, continuously from 8:30 am to 7:00 pm.

Condition: good (used), Year of construction: 2011, cutting diameter 290 mm capacity 90 degrees: flat 320 x 290 mm capacity 45 degrees: flat re 240 x 150 mm capacity 45 degrees: round re 240 mm capacity 60 degrees: flat re 150 x 180 mm capacity 60 degrees: round re 150 mm capacity 45 degrees: flat li 240 x 100 mm capacity 45 degrees: round li 240 mm turning speed range: 20 - 100 m/min saw band length 3100 x 27 x 0.9 mm power capacity 2.4 kW weight of the machine ca. 570 kg range L-W-H 1800 x 950 x 1550 mm Current list price: approx. 12.000 euros Special price upon request Features: - Semi-automatic electro-hydraulic band saw (INDUSTRIE) - Suitable for single-piece and small-batch production - Large, ball-bearing-mounted cast-iron rotary table * For miter cuts from 45° left to 60° right - Hydraulic cutting feed Material clamping - Continuously variable band speed (Model "F") - Ergonomic control panel - Micro-spray lubrication system (spray oiler) - 2x PEGAS roller conveyor - Operating instructions in German * Semi-automatic work cycle: Pedozv Ulwopfx Ap Hsgr After the cycle starts, the vise closes automatically; the saw frame lowers for the cut and automatically raises back to the predefined starting position once the cut is complete. Afterward, the vise opens.