Used Bench Seats for sale (13,187)

Condition: used, Double bench grinder, bench grinder, column grinder, column grinder -Motor power: 3.3 kW -Speed: 1400 rpm -Grinding disks: Ø 400 x 50 mm Hodpfx Afjc Ibywjlofk -Operating voltage: 380 volts -Dimensions: 800/1120/H1540 mm -Weight: 434 kg

Condition: good (used), Bench drill, stand drill, pillar drill, pillar drill -Manufacturer: Flott, bench drill type M2 ST Hfodpjmzkg Rofx Afljk -Clamping table: 260 x 200 mm -Travel: 310 mm -Spindle holder: MK2 with drill chuck 3-16 mm -Projection: 240 mm -Speeds: 400 - 3500 rpm -Pillar: diameter 82 mm -Spindle stroke: 100 mm, depth stroke with fine adjustment -Motor power: 0.75 kW -Voltage: 400V -Dimensions: 750/340/H1100 mm -Weight: 135 kg

Condition: used, Drill press, drill press, stand drill, pillar drill -Table size: 430 x 615 mm -spindle taper: MK4 -Projection: 365 mm Hodpfx Ajdyb Hteflofk -Speeds: 63-800 rpm -Spindle stroke: 195 mm -Transmission -Feed: 0.1-0.4 mm/rev -Water cooling -Dimensions: 730/1040/H2640 mm -Weight: 1026 kg

Condition: excellent (used), Drilling machine, bench drill, pillar drill, column drill, box-type drill, tapping machine, threading machine -Machine: is in very good condition and runs very smoothly. -Manufacturer: HIW Helmerding, bench drill -Motor: 1.0/1.6 kW -Speeds: 95 - 1050 rpm, 8-stage -Feed rate: 0.08/0.16/0.28 1/rev. -Table size: 500 x 400 mm, travel distance 685 mm Hfedshv S Etepfx Aflek -Spindle mount: MK3 -Spindle stroke: 180 mm -Protrusion: 280 mm -Dimensions: 1100/650/H2340 mm -Weight: 690 kg

Condition: good (used), Drill press, drill press, stand drill, pillar drill -Table size: 500 mm -spindle taper: MK4 -Projection: 400 mm Hsdscpbwbjpfx Aflefk -Speeds: 38-750 rpm -Feed: 0.08-0.13 mm/rev -Columns: Ø 220 mm -Spindle stroke: 235 mm -Transmission: -Dimensions: 640/1020/H2730 mm -Weight: 965 kg

Condition: used, Double bench grinder, double grinder, bench grinder, bench grinder Hfodopg N Stopfx Aflsk -Manufacturer: ESB, double bench grinder type DS 200 -Grinding discs: max. Ø 200 x 32 x 32 mm -Motor power: 0.9 kW -Speed: 3000 rpm -Receptacle: Shaft Ø 20 x 33 mm, see photos -Operating voltage: 220/380 volts -Dimensions: 490/195/H220 mm -Weight: 15 kg

Condition: good (used), driver's seat, forklift seat, tractor seat, tractor seat Hfedpfxox Ivrxe Afljk -Manufacturer: Klepp, driver's seat with suspension -Type: unfortunately without a type designation -Adjustable rails: with hand lever -Weight adjustment via handwheel -Dimensions: 500/470/H560 mm -Weight: 20 kg

Condition: good (used), bench drill, pillar drill, column drill -Manufacturer: AEG, Bench drill type DTBK-10 -Clamping table: 175 x 175 mm -Spindle mount: Drill chuck B16 -Protrusion: 200 mm -Column: Diameter 60 mm -Spindle stroke: 70 mm -Motor: 0.25 kW / 2800 rpm Hjdohfavqjpfx Aflsfk -Voltage: 380 V -Dimensions: 580/590/H730 mm -Weight: 60 kg

Condition: good (used), bench vice, metalworker & vice, parallel vice -Jaw width: 135 mm -Wingspan: 215 mm -Number: 3x vices available Hfjdpfevmg Ddex Aflek -Price: per piece -Dimensions: 440/200/H490 mm -Weight: 26 kg

Condition: used, Double bench grinder, bench grinder, column grinder, column grinder -Manufacturer: Cordia, double bench grinder type DOS 400 -Motor power: 2.2 kW -Speed: 1500 rpm -Grinding disks: Ø 400 x 50 mm -Operating voltage: 380 volts -Dimensions: 590/690/H1080 mm Hfodpsflw Azjfx Afljk -Weight: 246 kg

Condition: good (used), Vice, bench vice, metalworker's vice, parallel vice, heavy-duty vice -Parallel vice: jaw width 150 x 30 mm -Wingspan: 235 mm -Dimensions: 490/220/H195 mm Hedpfx Afsvm U Htelofk -Weight: 26 kg

Condition: used, Double bench grinder, double grinder, bench grinder, bench grinder -Manufacturer: Rema, double bench grinder type DS 12/200 A with sanding dust extraction -Grinding discs: max. Ø 200 x 32 mm -Motor power: 0.9 kW -Speed: 2900 rpm -Operating voltage: 220/380 volts Hfjdpopcmt Nsfx Aflsk -Dimensions: 480/450/H1060 mm -Weight: 143 kg with pallet

Condition: used, Double bench grinder, double grinder, bench grinder, bench grinder -Manufacturer: Rema, double bench grinder type DS 12/200 -Grinding discs: max. Ø 200 x 32 x 51 mm Hjdpfx Afopix Nvolsfk -Motor power: 0.9 kW -Speed: 2900 rpm -Operating voltage: 220/380 volts -Dimensions: 430/420/H1130 mm -Weight: 80 kg

Condition: used, Butterfly valve, flap valve, ball valve, butterfly valve, shut-off valve, gate valve, pneumatic control valve, angle seat valve, valve -Manufacturer: Bürkert, pneumatically operated 2/2-way angle seat valve -Type: 2000A 40.0 PTFE VA -Connection: DN40 PN16 -Dimension: 220/100/H240 mm Hfsdpfxoigwc Ie Aflok -Weight: 2.9 kg

Condition: good (used), Double bench grinder, double grinder, bench grinder, bench grinder -Manufacturer: Rema, double bench grinder type DS 1/200 Hjdjnymgaopfx Aflofk -Grinding discs: max. Ø 200 x 32 mm -Motor power: 0.9kW -Speed: 2900 rpm -Operating voltage: 220/380 volts -Dimensions: 550/420/H1420 mm -Weight: approx. 72 kg

Condition: good (used), Drill press, drill press, stand drill, pillar drill -Manufacturer: WMW, column drilling machine type CM 10S/55 -Motor: 630 W -Speeds: 460 - 2190 rpm Hfsdpfsfunydjx Aflek -Translation: via V-belt -Table size: 220 x 280 mm -spindle taper: MK1 -Spindle stroke: 70 mm -Projection: 200 mm -Pillar Ø: 85 mm -Dimensions: 400/800/H1670 mm -Weight 206 kg

Condition: new, - Sturdy steel and cast iron construction - Dynamically balanced milling unit anchored to the work table - Especially robust design - Smooth operation thanks to precision assemblies and high intrinsic weight - Standard with reversing function (left/right rotation) and electronic interlock when changing direction - Five speeds from 3,000 to 10,000 rpm - Speed change is easily and conveniently operated from the machine side - Standard with MK 4 quick-change spindle system - Large cast iron work table for long-term precision - Easy handling via control elements and speed display located at the front of the machine - Large dimensioned milling fence with fine adjustment and aluminum fence jaws as standard - Fence adjustment via hand crank - Numeric display of the set spindle height, accurate to 0.1 mm - Powerful industrial motors This product comes with a 3-year Stürmer warranty upon online registration. Warranty applicable to end customers in Germany and Austria only. Manufacturer: SCM Group S.p.A. Via del Lavoro 1/3-Po Box 168, 36016 Thiene-Vicenza, Italy Dimensions and Weights: Hjdpeu T Hhkofx Aflofk - Net weight approx.: 510 kg Dust Extraction Connection: - Number of extraction ports: 2 - Extraction port diameter: 80 mm - Number of extraction ports on fence: 1 - Extraction port diameter on fence: 120 mm Work Table: - Work table length: 2,500 mm - Work table width: 810 mm - Table height: 923 mm Placement Information: - Space requirement explanation: Dimensions take into account the maximum travel ranges or usable lengths. - Working area length: 3,700 mm - Working area width/depth: 5,000 mm - Working area explanation: Please add the specified measurements to the space requirement to obtain the recommended free installation area for the machine. Equipment: - Milling fence: Heavy-duty professional version with aluminum fence jaws and fine adjustment, adjustment from the front via hand crank with numeric digital display - Curved milling safety hood - Spindle height adjustment: manual - Spindle tilt adjustment: manual - Control: manual adjustment of milling unit height and tilt - Control element position: located on the machine body - Table configuration: table extension on left and right, and pull-out workpiece support (total width 2,500 mm) Electrical Data: - Connection voltage: 400 V - Mains frequency: 50 Hz - Drive motor power: 7.0 kW Milling Spindle: - Spindle tilt: -45 to +45° - Usable spindle length: 140 / 180 mm - Usable spindle length explanation: for spindle Ø 30–35 mm / for spindle Ø 40–50 mm - Milling spindle stroke: 90 mm - Quick-change spindle: MK 4 - Spindle speeds: 3,000 / 4,500 / 6,000 / 8,000 / 10,000 rpm Max. Milling Tool Diameter: - Max. tool diameter (lowerable): 320 x 60 mm - Max. profile milling diameter: 250 mm - Max. tenoning diameter: 350 mm - Max. form milling diameter: 160 mm

Condition: excellent (used), Kübrich Kübrich Test Systems 48V Belt Starter Generator - Component Test Bench Details of the test bench: (See Figure 13) Frame with (1) Mounting device for a belt starter generator (2) Load machine (3) Belt (4) MP1: Control cabinet (5) MP3: Control cabinet for control, interface panel with main switch, I/O (6) MP2: Control cabinet with Simotion (7) MP4: Control cabinet with DC-DC converter (8) H3: Measuring technology box (9) H4: Interface box Intended use: The test bench is used for conducting tests on belt starter generators during development. Technical data: Electrical connection data Power supply: 400 V / 32 A Battery simulation: 0 - 60 V Current: 0 - 250 A (continuous) Current: 330 A (briefly, less than 1 s) Control voltage: 24 V Mechanical performance data according to the data sheet of the load machine Note that a gear ratio of 1:2 to the test specimen shaft must be observed. Hedpfxozhkb So Aflefk Rotational speeds: Load machine: Manual operation: 0 - 50 1/min Automatic operation: 0 - 10,000 1/min Test specimen motor: Manual operation: 0 - 100 1/min Automatic operation: 0 - 20,000 1/min Dimensions and weight Width: 850 mm Height: 1386 mm Length: 1687 mm Weight: approx. 1.2 t Condition: used Scope of supply: (See Figure) (Changes and errors in the technical data and details are subject to change!) We will gladly answer any further questions you may have by telephone.

Condition: used, Year of construction: 2000, Boring machine Manufacturer: TOS Type: VARNSDORF WHQ 13.8 CNC Year of manufacture: 2000 CNC control: Heidenhain 426 Completely overhauled in 2022 Report available Travel ranges: X/Y/Z: 3,500 x 2,500 x 1,250 x B800 mm Number of axes: 5 Table length: 2,200 mm Table width: 1,800 mm Clamping area: 1,800 x 1,600 mm Table load: 12 tons Number of tool positions: 60 Spindle shank: SK 50 Spindle diameter: 130 mm Spindle speed: 2,500 rpm Power: 90 kW Hfodpfx Afsx A Ayioljk Handwheel Heidenhain Telescopic guard completely overhauled with a new wiper. Dimensions: L x W x H approx.: 7,500 x 6,950 x 4,000 mm Weight: 40 tons 22726

Condition: good (used), mileage: 4,19,701 km, power: 140 kW (190.35 HP), fuel type: diesel, gearing type: mechanical, axle configuration: 2 axles, first registration: 11/2013, emission class: euro5, color: silver, number of seats: 22, Equipment: ABS, air conditioning, airbag, central locking, cruise control, parking heater, trailer coupling, Mercedes-Benz Sprinter 519 CDI, registered: 29.11.2013, Mercedes engine 190 hp Euro5, 419,701 km, 6-speed manual transmission, 19+2+1 reclining seats with seatbelts, air conditioning, cruise control, auxiliary heater, tachograph, ABS, ASR, driver airbag, radio, TV, microphone, double glazing, reading lights, individual ventilation nozzles, sun visor, electrically adjustable exterior mirrors, electrically operated driver’s window, roof hatches, twin tires, electric door, central locking, reversing camera, trailer coupling, trunk. Hfedpfxezl Tm So Aflek - Euro5 engine - Vehicle length: 7.35 meters - Windshield with a crack EUR1 document possibly available for Serbia, Kosovo, Bosnia, North Macedonia, ...

Condition: used, mileage: 8,12,477 km, power: 320 kW (435.08 HP), first registration: 03/2016, fuel type: diesel, number of seats: 46, gearing type: automatic, next inspection (TÜV): 12/2026, emission class: euro6, color: gold, brakes: retarder, Year of construction: 2016, Equipment: ABS, air conditioning, bathroom, parking heater,

Condition: new, Year of construction: 2024, New machine Year of manufacture: 2024 Robust drilling machine featuring a powerful OPTIMUM brushless drive. Key highlight: menu-guided control for operating modes drilling/tapping. - Smooth-running and high-performance brushless drive - Optimal power transmission via aluminium pulleys combined with a toothed GATES quality V-belt - High running smoothness thanks to precision-ground multi-spline drive - Concentricity guaranteed at less than 0.015 mm, measured at the quill - Drilling spindle with precision ball bearings - Membrane keypad; dust- and water-resistant, easy to clean - High-quality OPTIMUM quick-action drill chuck included as standard - Separate emergency stop pushbutton - Precisely machined worktable with diagonal T-slots, 360° rotatable - Integrated coolant channel surrounding the worktable - Large, height-adjustable safety guard with interlock switch for maximum operator protection - Drilling depth stop - V-belt guard with safety switch - V-belt tensioning mechanism - Solid, large base plate with reinforced ribs at the rear Technical specifications: Column diameter: 60 mm Dimensions (LxWxH): approx. 552 x 445 x 850 mm Weight: approx. 64 kg Drilling capacity (steel): 18 mm Continuous drilling capacity (steel): 16 mm Tapping capacity (steel): M10 Table size: 230 x 245 mm Speed range: 100 – 6000 rpm Number of speed ranges: 5 Total power connection: 1.5 kW Mains voltage: 230 V Quill stroke: 65 mm Spindle taper: MT 2 Hjdpew Rhk Rjfx Afljfk Throat depth: 130 mm Including quick-action drill chuck 1–13 mm Including machine vice BMP 100 Availability: short-term Location: Flörsheim

Condition: used, mileage: 4,88,015 km, power: 95 kW (129.16 HP), first registration: 06/2005, fuel type: diesel, tire size: 225/70 R22,5, wheelbase: 4,030 mm, fuel: diesel, gearing type: mechanical, suspension: steel, total length: 6,500 mm, total width: 1,930 mm, total height: 2,550 mm, permissible axle load (axle 1): 1,600 kg, permissible axle load (axle 2): 2,240 kg, Year of construction: 2005, Equipment: ABS, trailer coupling, = Additional Options and Accessories = - Radio/CD player = Further Information = Technical Information Number of cylinders: 4 Engine displacement: 2,148 cc Axle Configuration Tire size: 225/70 R22.5 Suspension: Leaf spring suspension Maximum front axle load: 1600 kg Maximum rear axle load: 2240 kg Hedpfoznpcnox Afljfk Weights Unladen weight: 2,150 kg Payload: 1,350 kg GVWR (Gross Vehicle Weight): 3,500 kg Identification Reference number: 38

Condition: used, Double Bench Grinder REMA DS 04/150 Rotation: 2900 RPM Grinding wheel: Ø 150 x 25 mm Motor power: 0,3 kW Voltage: 380 V Hfedpfx Afszmwmfoljk Width: 450 mm Depth: 300 mm Total height: 1100 mm Weight: env. 50 KG

Condition: used, Bench Grinder REMA DS 12/200 - 1 grind Rotation: 2900 RPM Grinding wheel: Ø 200 mm x 30 mm Motor: 0,9 kW Hfodpfx Afezmwl Ijlek Voltage: 380 V Width: 600 mm Depth: 400 mm Total height: 1100 mm Weight: approx 80 KG