Used Bevelling for sale (632)

Condition: ready for operation (used), Year of construction: 2011, functionality: fully functional, operating hours: 1,651 h, workpiece height (max.): 60 mm, edge thickness (max.): 3 mm, feed rate X-axis: 25 m/min, HOMAG KAL 310 + panel return system TFU 140! TECHNICAL DETAILS Profile milling unit FK11 manual Edge thickness: max. 3 mm Motors: 2 units Motor power: 0.4 kW per motor Frequency: 200 Hz Speed: 12,000 rpm Feed speed: max. 20 m/min Feed speed for continuous trimming without profile trimming: max. 30 m/min Panel length single-sided: min. 240 mm Panel length double-sided: min. 120 mm Panel thickness: 12 - 60 mm Panel spacing with PC22: min. 500 mm Minimum workpiece gap for workpiece thickness over 22 mm: min. 600 mm Multi-scraper MN21 Automatic Number of profiles: max. 5 different profiles Edge thickness: max. 3 mm Panel thickness for radius R = 3 mm: min. 13 mm Panel thickness for bevel 0.5 x 45°: min. 10 mm TC knives: 2 units Bevel angle: 20° Radius: R = 1.5 / R = 2 / R = 3 / R = 5 Pre-milling unit BF10 Motors: 2 units Motor power: 0.55 kW per motor Frequency: 200 Hz Speed: 12,000 rpm Swivel range: +/- 1° TC cutter: 70 x 25 mm HSK: 25 Cutting angle: 54° Feed speed: 18-25 m/min Workpiece thickness: 8-60 mm Edging material (roll): 0.3-3 mm Rcjdpfxsyzxa Es Abpsf MACHINE DETAILS Operating hours Operating hours: 6,358 h Feed time: 1,651 h EQUIPMENT Pre-milling Automatic adjustment of the infeed fence Infeed device with 2 rollers Quickmelt application station 2-roller magazine infeed Automatic adjustment of the pressure zone HL84 end trimming unit with pneumatic adjustment BF10 flush milling unit with pneumatic adjustment FK11 profile milling unit MN21 multi-profile scraper unit for 5 different profiles Grooving unit Glue joint scraper Buffer Return system TFU140

Condition: good (used), Year of construction: 2004, Flat geared motor, geared motor, electric motor, electric geared motor, bevel geared motor -Manufacturer: Defan, geared motor with drive shaft -Speed: 186 rpm -Transmission: Type NMRY090 i= 7.5 Rsdpfxsxuf U Ho Abpecf -Engine: Type YS100L2-4 -Power: 3 kW -Hollow shaft/shaft: Ø 35 mm / Motor shaft Ø 25 mm Dimensions see photos Protection rating: IP55 -Dimensions: 600/250/H330 mm -Weight: 38.2 kg

Year of construction: 1998, condition: good (used), Manufacturer unknown Rcsdpfxjf Axilj Abpof Year of manufacture: unknown TRAV H/2830 The Aro Corporation, Model 78051BSN Technical specifications: Pneumatically operated For internal milling operations, 50-225mm Accessories as shown in the picture

Condition: used, Gears, spur gears, bevel gears, worm gears -Gear: bevel gear type E 080 B -Translation: i 24 : 1 -Shaft: Ø 12 x 25 mm -Hollow shaft: Ø 12 x 65 m -Dimensions: 140/60/H90 mm -Weight: 1.5 kg Rjdeit Rmiopfx Abpecf

Condition: used, Gear motor, electric motor, electric gear motor, bevel gear motor -Manufacturer: Almo, gear motor type G2.2DDK71K4 -Speed: 25 rpm -Power: 0.25 kW Redpfxet Drlqo Abpocf -Shaft: Ø 25 x 50 mm -Design: B3/B14 -Protection class: IP55 -Dimensions: 375/140/H200 mm -Weight: 16 kg

Condition: used, mileage: 2,17,000 km, power: 310 kW (421.48 HP), first registration: 08/2023, fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, next inspection (TÜV): 08/2026, gearing type: automatic, Year of construction: 2023, Equipment: ABS, air conditioning, electronic stability program (ESP), navigation system, parking heater, We are delighted that our offer has sparked your interest, and we assure you that you will be able to purchase a good and affordable vehicle with a verifiable service history at our dealership! Special equipment: Storage compartment above windshield, lockable, axle load - measuring device, ambient lighting LED (driving and living), trailer stabilization program TSA, trailer brake 2 - line, audio system: digital radio DAB / DAB+, equipment package: Driving, equipment package: Economy, equipment package: Media, equipment package: Safety, batteries arranged on top of each other, air horns (2) on the cab roof, driver assistance system: high beam assistant and cornering light, cab: shaving mirror, cab: smoke detector, vehicle without trailer coupling, vehicle transmission 12-speed - type: G 211-12, holder for notebook, rear lights LED, automatic climate control, upper comfort bunk, wide, fender 3-piece, fender 3-piece with splash guard, fuel tank: 500 L aluminum, left, cooler box / refrigerator, steering oil cooling, integrated air intake, roof air deflector, air compressor 2-stage, illuminated Mercedes star, reinforced engine brake, trailing axle 7.5 t steered, load-relieving, PremiumComfort mattress top, PremiumComfort mattress bottom, wheelbase variant 4900 mm, frame overhang 2250 mm, rain sensor, headlight cleaning system (SRA), sliding / lifting roof electrically (glass), drawers under railing, seat cover / upholstery: passenger seat velours, seat cover / upholstery: driver seat velours, seats in the cab: armrests on both sides passenger seat, seats in the cab: driver seat comfort suspension seat, sound system, steel rims 11.75x22.5 (on front axle), auxiliary air conditioning electrically, storage compartment outside left, socket 12V / 15 A in passenger footwell additionally, socket 24V / 25 A in passenger footwell, curtain sleeping cabin, seat belt warning device Additional equipment: Rjdpfx Absynqi Rjpocf Emission standard EURO 6, axle configuration: 6x2, front axle load 8.0 t, Actros 5, Actros cab L, heated approach / front mirrors, trailer socket 24V / 15-pole, exhaust to the right outside, equipment package: Powertrain 2, battery 220 Ah, differential lock rear axle, torque increase 12th gear, compressed air connection in the cab, compressed air tank steel, compressed air unit high, compressed air unit with condensate monitoring, automatic activation for driving lights (light sensor), driver assistance system: Attention-Assist (fatigue detection sensor), driver assistance system: Autonomous Emergency Braking Assistant (Active Brake-Assist 5), driver assistance system: lane keeping assistant, cab: fixed cab access, cab: interior package chrome, cab: tilting mechanism hydraulic, cab: L GigaSpace, 2.50 m, floor level, cab: steel-sprung, comfort, vehicle outline lights LED, suspension: air / air (full air), electric windows, windshield tinted, vehicle without rear window, generator 100 A, regulated, speed limiter, urea tank (AdBlue): 60 L, rear axle with active lubrication, unregulated, rear axle bevel gear 440, body / superstructure: chassis, lower comfort bunk, comfort locking system, steering assistance pump electronically controlled, heated air dryer, engine 12.8 L - 310 kW R6 diesel (OM 471), engine variant OM 471, type of use: local transport, wheelbase not defined, ramp mirrors, waste heat recovery, disc brakes front and rear axle, key with remote control

Condition: good (used), Year of construction: 2002, Clampable cutter head type (max.) 460 mm Cutter head weight (max.) 150 kg Mounting disc diameter for cutter heads (Ø) 360 mm Mounting cone for cutter heads Nominal diameter Ø 58,227 mm travel -z axis 200 mm diagram-drawing enlargement ±10 - ± 500 µm weight of the machine ca. 2,3 t dimensions of the machine ca. 2 x 1,5 x 2,03 m In the manufacturing process for spiral-toothed bevel gears, the quality of the gear cutting gear cutting tools used plays a decisive role. Particularly in high gear cutting quality and a long service life can only be achieved with precisely can only be achieved with precisely adjusted cutterheads. The Oerlikon cutterhead setting and testing device CS 200 enables quick and easy setting of the individual knives and simple adjustment of the individual knives, it checks the position and documents the measurement results. The Redpew N S E Ajfx Abpecf measuring sequence on the CNC-controlled testing device is partially automated: The individual actions for carrying out the actions for carrying out the sequence are displayed on the screen via the operator guidance. The positioning of the individual knives in the cutter head and the height of the knife tips is largely automatic thanks to a special sequence and is simultaneously documented by means of a run-out diagram. A subsequent measuring sequence checks the radial position of the inner and outer cutting edges of all knives in the cutterhead. If individual test parameters on the knives do not correspond to the the tolerance specifications, this can be individually repositioned. The combination of semi-automated setting sequence, operator-guided set-up actions and automatic operator-guided set-up actions and automatic measuring sequence, cutterheads can be can be set conveniently, quickly and with high precision. Operator-guided setting and test sequence - Graphic display of the cutter head design and the measurement results with tolerance check - Instructions for the operator in plain text Instructions for the operator in plain text (without coded information) - Simple assignment of the measurement results to the knives - Documentation of the setting and measurement results via printer- Setting and test sequence suitable for ARCON®, RSR, Spirapid, SPIRON®, TRI-AC® types - Interface for neutral data

Condition: used, mileage: 29,885 km, power: 290 kW (394.29 HP), first registration: 01/2020, fuel type: diesel, empty load weight: 7,000 kg, maximum load weight: 11,000 kg, overall weight: 18,000 kg, axle configuration: 4x2, wheelbase: 4,800 mm, brakes: engine braking, color: white, driver cabin: day cab, gearing type: automatic, emission class: euro6, suspension: steel-air, number of seats: 2, Equipment: ABS, air conditioning, cabin, central locking, cruise control, differential lock, electronic stability program (ESP), navigation system, onboard computer, power assisted steering, traction control, trailer coupling, Vehicle location: Bovenden. ClassicSpace, Active Brake Assist, Mercedes PowerShift 3, sleeper cab, air-suspended driver's seat, electric mirrors, heated mirrors, electric windows left and right, air conditioning, cruise control, navigation system, ABS (anti-lock braking system), ASR (traction control system), constant throttle, differential lock, leaf/air suspension, trailer coupling with air and electrical connections, aluminum fuel tank, underrun protection, roof hatch, green environmental badge. Wheelbase: 4800 mm Superstructure: with slidebed tow platform, wheel lift, 2x winches, radio remote control, 7.5t front axle, rear axle with 440 hypoid bevel gear, 13t, electronic braking system with ABS and ASR, disc brakes with partial protection at front and rear axles, condensate monitoring for compressed air system, electronic parking brake, stabilizer at front axle, aluminum front underrun guard, residual heat utilization, light sensor, comfort central locking, economy/power driving program, navigation system, multimedia cockpit, pre-installation for toll collection, daytime running lights, engine brake, ESP (Electronic Stability Program), lane departure warning system, attention assist, traffic sign assist, Active Brake Assist. Rcsdoxamyuspfx Abpof Frame length approx. 6350 mm! Overall length: 8500 mm! Optionally available with a loading crane (12–20 mt) at a surcharge of EUR 20,000 to 40,000! ACCESSORY INFORMATION WITHOUT GUARANTEE, subject to change and prior sale and errors excepted.

Condition: new, empty load weight: 12,040 kg, maximum load weight: 71,000 kg, axle configuration: > 3 axles, first registration: 06/2025, suspension: air, load capacity: 58,960 kg, • 24V hydraulic power pack • Width extensions • Loading platform 8.90 m • Gooseneck 3.45 m, straight section • Width from 2.53 to 3.00 m • Deck height 0.90 m • Beveled rear section • Hydraulic ramps 3 m x 0.90 m Rjdpfx Aox U E A Hsbpscf • 14 lashing rings • Coupling height 1350 mm • Smartboard • LED lights • 1st axle liftable • 3rd and 4th axle self-steering • Drum brakes • Convoy kit • Length 12.65 m

Condition: good (used), Weld edge former, weld edge former, weld preparation, weld edge forming machine, edge milling device, edge milling machine, mobile milling machine Rjdpfxex Ehf Ns Abpscf -Manufacturer: BDS, Weld edge former/edge milling machine -Type: SKF 20 -Power: 1.1 kW -Accessories: see photos -Box dimensions: 460/355/H355 mm -Total weight: 29.4 kg

Condition: good (used), Year of construction: 1989, overall weight: 1,050 kg, tooth pitch: 120 mm, total width: 1,850 mm, total length: 1,550 mm, total height: 1,800 mm, saw blade diameter: 800 mm, grinding wheel diameter: 175 mm, input voltage: 380 V, type of input current: three-phase, saw blade bore: 10 mm, saw blade width: 16 mm, input frequency: 50 Hz, We offer this good Vollmer Finimat beta sharpening machine, year of construction 1989. Use of one grinding head in combination with two diamond wheels for face and top. Triple chip tooth configuration can be ground in one revolution of sawblade. Saw blade diameter: 100-800 mm Bore size minimum: 10 mm Tooth pitch: 8-120 mm Blade thickness maximum: 16 mm Rake angle range: -20 to +30 degrees Top clearance angle range: +5 to +25 degrees Bevel angle (face) range: 0 to +15 degrees Bevel angle (top) range: 0 to +45 degrees Tooth height differential range: 0 to 1 mm Grinding wheel outer diameter options: 175 or 125 mm Grinding wheel bore diameter: 50.8 mm Maximum circumferential speed: 34 m/s Minimum circumferential speed: 25 m/s Voltage: 380 V Phase: 3 Frequency: 50 Hz Total connected load: 4.6 kW Machine width: 1850 mm Machine depth: 1550 mm Machine height: 1800 mm Net weight: 1050 kg Available April 2026 Rjdpfsx Saw Tex Abpecf If you have any questions or need more information, feel free to send us a message or give us a call.

Condition: used, Gear motor, electric motor, electric gear motor, bevel gear motor -Manufacturer: SEW-Eurodrive, geared motor -Type WA20 DR63L4/IS i 39.00 -Speed: 33 rpm -Power: 0.25 kW -Hollow shaft: Ø 20 x 90 mm -Protection rating: IP54 -Quantity: 1x geared motor available -Dimensions: 300/220/H150 mm Rcodpfx Absqddi Hepef -Weight: 9.2 kg

Condition: used, mileage: 12,83,582 km, power: 240 kW (326.31 HP), first registration: 02/2010, fuel type: diesel, overall weight: 18,000 kg, axle configuration: 2 axles, gearing type: mechanical, emission class: euro5, total width: 2,550 mm, total height: 4,000 mm, loading space length: 8,400 mm, loading space width: 2,500 mm, loading space height: 2,500 mm, Equipment: air conditioning, parking heater, Special equipment: Wheel nut covers, trailer brake 2-line, trailer socket 24V / 15-pin, cockpit distribution, cab: comfort suspension (1.8 Hz), transmission 9-speed - type: G 131-9, body variant: high roof, fuel tank: 500 L aluminum, coupling heads DuoMatic, air deflection body roof, roof height 4.0 m, air dryer 1 chamber heated, spare wheel jack, side, reversing warning system acoustic (warning signal outside), seats in the cab: driver's seat, sprung comfort seat, socket cab 24V, daytime running lights automatic, heat-reflecting glazing, auxiliary heater (air) Additional equipment: Emission standard EURO 5, axle configuration: 4x2, axle load front axle 7.5 t, exterior mirrors electrically adjustable and heated, exterior mirror electrically adjustable, left, outside temperature display, battery 165 Ah, differential lock rear axle, cab: L (long), suspension: leaf / air, power windows, generator 80 A, transmission - hydraulic shifting, urea tank (AdBlue): 95 L, rear axle H 6, bevel gear 440, body / superstructure: chassis, model update Axor 2, engine 7.2 L - 240 kW diesel (OM 926 LA), engine start / stop system, engine brake with constant throttle, pollen filter, spare wheel under frame end, disc brakes, seats in the cab: passenger single seat, fixed, splash guard front, stabilizer rear axle, stabilizer front axle, Telligent brake system with ABS+ASR, underrun protection rear, fixed, underrun protection front, preparation for toll collection, front axle crowned, immobilizer, permissible total weight 18.00 t * FIN: WDB9505391L456658 * Double deck * 42 pallets * Box body inside length: 8.40 m * Box body inside width: 2.50 m * Box body inside height: 2.50 m * First registration: 09.02.2010 * Well-maintained * TÜV valid until 02/2023 * ----Trailer: * Tandem Gföllner AKO1/10L * 1-axle * Pass-through system * 30 pallets * Double deck * FIN: VASAL210YBGKA8334 * Tare weight: 4550 kg * Payload: 5450 kg * Total weight: 10000 kg * Box body inside length: 9100 mm * Box body inside width: 2550 mm * Box body inside height: 3975 mm Rcsdpjkq Ahhofx Abpjf * Year of manufacture: 27.07.2011 * Tires: 295 / 80 R 22,5 Tel./WhatsApp: * ----Vehicle + trailer total length: 20200 mm * Price net * All information without guarantee

Condition: like new (used), We offer a comprehensive spare parts package for the machine types Doppstadt DW 3060 and Doppstadt AK 430/435/560. These are new and as-new parts! Please request our list! Rcodpfeqx Ur Dex Abpef Do you have a problem with your bevel helical or planetary gearbox? We offer qualified repair service, spare parts, and new gearboxes! We will accept your defective gearbox as part exchange after inspection! Please send us your enquiry!

Condition: new, Year of construction: 2026, This is a state-of-the-art CNC machine dedicated to the industrial sector, used for cutting sheets and profiles, using a plasma torch. The machine is characterised, among other things, by a robust structure made of the highest quality steel and aluminium, a large cutting range, the possibility of cutting workpieces of any shape and low process costs. The high-end solutions used in production ensure reliable and safe operation. The cutting of the material is carried out in a short time, while maintaining the precision of the workpiece. In order to obtain the desired shape, it is only necessary to import the file into the software, so operation of this cutting machine is easy and intuitive. Our plasma cutting machines are primarily designed to process materials such as: - Black steel, - Stainless steel, Rjdpfxjur R Erj Abpscf CONSTRUCTION The frame of the plasma cutting machine is designed and manufactured from scratch in our factory. The high quality steel used for the machines is cut, then welded and machined. The entire frame, gantry and gantry arms have additional ribbing to achieve high rigidity and eliminate vibration and deformation. DRIVES Servo AC motors with high resolution and power have been used to drive our cutters, ensuring adequate acceleration and speed in each direction. These are highly dynamic and precise motors with feedback, guaranteeing zero defect by continuously controlling the operating parameters. The X and Y axes use classic and well-proven helical bars, which ensure long life and precision. FUEL Our plasma machines use components from the leading manufacturer PGCNC. The technologies used in the torch significantly increase productivity and cutting speed. HD technology provides better hole quality, increased piercing capacity and bevelling capabilities. This ensures high quality, repeatable cuts and maximises productivity with minimal running costs and reliability. KNIFE TABLE The knife table is made with technology that is resistant to working at elevated temperatures. This allows us to work continuously without worrying about the occurrence of burn-outs that prevent the material from being evenly positioned on the work table. The positioning of the scissors can be easily changed according to the size of the workpieces to be burnt. The knife table is an excellent solution for cutting thicker materials. SOFTWARE The machine is equipped with Starfire 2D CAD/CAM software. Various functions are available to the user, including the ability to import finished designs in vector formats: .dxf, .plt, .ai, .eps. The programme ensures fast and precise development of cutting paths. PLASMA SOURCE The basic plasma equipment includes the 120A cutting system, which is characterized by high productivity and cutting quality and speed. AUTOMATIC LUBRICATION SYSTEM Plasma cutting machine equipment also includes an automatic lubrication system that minimizes machine maintenance. The central lubrication system is a simple and functional device used to supply grease to the places where machine and equipment components come into contact. - POWER 400V 50Hz - MAX SPEED 45 m/min - DOOR SHAPE 200-600 mm - TYPE OF WORKING TABLE Knife table - WORKING TABLE WEIGHT 500 kg/m2

Condition: as good as new (ex-display), Year of construction: 2025, One-sided automatic edge banding machine with pre-milling unit, direct glue application to straight workpieces (EVA-PUR Glue pot with run-out function/optional), HF-cut-off saw station, HF-top and bottom milling unit, Corner rounding unit, chain feed, double roller top pressure, extendable work piece support and signal lamp for work piece sequence. For ABS, PVC, melamine and strong wood veneer roll material as well as fixed lengths from 0.4 –3.0 mm and of 8 – 50 mm work piece thickness. Speed: 7,0 m/min. • 2 spaces for finishing units • 10,0“ Colour Touch screen →Automatic edge feeding for material over turntable D=600 mm →Infeed lineal (400mm) →Two reverse, operating-controlled pre-milling units with diamond charged helical joining millers provide a neat and tear-free premilling of the work pieces before the gluing of the edge material →Glue application directly to workpieces: Teflon-coated glue pot with a capacity of 1,5 kg, leak proof with glue supply from below (excess glue automatically flows back into the glue pot). Glue roller allows exact dosage of glue. Separate glue roller temperature adjustment. Electronic temperature control with automatic stand-by function (reduces probability that the glue burns if the machine is not used for a longer periods and is still turned on). Optional: EVA/PUR glue pot with run out / cleaning function for quick change of glue. →Pneumatically operated cut-off knife from roll material up to 3 mm edge thickness →A group of two rollers exerting pressure on the edge band mechanically in order to achieve its adhesion onto the panel edge. The first roller is driven and the smaller second one is idle. Adjustment of the pressure rollers with mechanical SIKO display →High-frequency cut-off saw equipped with HF motor 0.21 kW, 12,000 rpm , 2 saw blades and high-precision linear guides ensure a clean and precise saw cut, with extraction hood. →High-frequency top and buttom milling station, 2 powerful 0.27 kW high-frequency motors with HM-WPL special millers; suitable for radius and bevel milling, horizontal and vertical scanning of the work piece; aggregate adjustment equipped with digital readouts for setting to various edge types; 2 extraction hoods for shavings with central extraction nozzle 2 x Ø 100 mm; height adjustment of the upper aggregate with the top roll pressure →Corner rounding unit : automatic processing of corner edges up to 2 mm edge thickness. Equipped with one high frequency motor 0, 27 kW, selectable on operating panel →Rotatable control panel with 10,0“ color touch screen controls glue temperature settings, automatic temperature reduction for stand-by function of the machine, switching on and off of aggregates and error diagnosis →LED lights Rsdpsd R U Adsfx Abpecf →Optional : Riepe non-stick spray station and Riepe cleaning spray station Additional finish aggregates : →Radius scraper unit : With a slight draw cut eventual radius milling traces are removed to provide a perfect finish. The fine adjustment is made by digital readouts →Glue scraper unit : Removes eventual glue rests with a slight draw cut from the glue joint of the work piece surface →Buffing unit : 2 motors 0.05 kW, 1,500 rpm provide a super-finish for ABS and PVC ed 67641340e9686

Condition: new, functionality: fully functional, machine/vehicle number: Produktpalette, empty load weight: 5,070 kg, maximum load weight: 33,300 kg, overall weight: 38,000 kg, axle configuration: 3 axles, loading space height: 990 mm, total length: 13,990 mm, total width: 2,550 mm, suspension: air, tire size: 385/55R22,5", tire condition: 100 %, Customized Transport Solution Configure your Fliegl vehicle to meet your specific requirements. The vehicle shown is an example. Production and equipment are customized according to customer specifications. Rcodji Ri R Sopfx Abpjf Semi-Trailer Container Chassis Fine-grained steel welded construction, semi-trailer plate with 2 interchangeable kingpins and 2 kingpin positions Container Mounts: Rear extension retracted: 1 x 20-foot or 1 x 30-foot, flush with rear Center telescopic stage 1, rear extension extended to stage 1: 2 x 20-foot or 1 x 40-foot, with or without gooseneck tunnel Center telescopic section, 2nd stage; rear extension extended, 2nd stage: 1 x 45-foot container with gooseneck tunnel and rear overhang Center telescopic section, 2nd stage; front extension extended, 1st stage Rear extension extended, 2nd stage 1 x 45-foot container with long gooseneck tunnel and beveled corners Center telescopic system as a telescoping central tube frame with bolt locking mechanism with rear height adjustment and foldable center supports for containers without tunnels Container guide at the front, plug-in and removable Plug-in adapter for front locking, to secure containers without tunnels from below, with mounting bracket when not in use Front extension mounted on rollers, manually extendable (for 45-foot containers with long tunnels) Rear extension mounted on rollers, with hand crank 24-metric-ton, 2-speed support jack, single-sided operation Extendable underrun protection for 45-foot containers Rear bumper Axles + Suspension SAF disc brake axles with 430 mm disc diameter Laser-measured axles/chassis to reduce tire wear and fuel consumption Offset wheelbase mm (combined transport) up to 44to gross train weight Air suspension 1st axle: automatic lift axle, including forced lowering and start-up assist; operated by 3 brakes (start-up assist functions up to a 30% axle load exceedance and at speeds up to 25 km/h) Brake System 2-line compressed air brake system; color-coded lines for easy servicing. Spring-loaded parking brake Tele Control Axle relief for easy telescoping 2 non-reversible coupling heads at the front, without connecting line EBS, Electronic Brake System with EBS socket at the front, without connecting cable Caution: The trailer may only be towed by towing vehicles that ensure the effectiveness of the ABS! With lift & lower valve Vehicle stability control system Axle load detection via EBS CAN bus signal, for display in the cab; truck must be equipped accordingly; no truck installation required (no calibrated scale) Wheels and Tires 385/55 R22.5, manufacturer’s choice Steel rims, factory silver Electrical System 24 volts, multi-chamber lights, LED taillights and brake lights, yellow LED side lighting (Note: With certain towing vehicles, false diagnostic errors may occur even though the system is functioning properly) 2 white front position lights 2 white/red lane-departure warning lights at the rear 2 x 7-pin reverse-proof sockets at the front, without connecting cables Operating Instructions When transporting 45-foot containers with a short tunnel, with or without a front extension, the permissible system length from the kingpin to the rear edge of the vehicle and the total train length of 16,500 mm will be exceeded! The underrun protection must be extended manually! A special permit pursuant to § 70 StVZo is required! Type Approval pursuant to EC Directive 2007/46

Condition: used, Gear motor, electric motor, electric gear motor, bevel gear motor -Manufacturer: Neri, gear motor -Gear: Speed: approx. 105 rpm -Engine: Type T63BN/4 Rcjdpfxein Hrfj Abpsf -Power: 0.18 kW / 1400 rpm -Shaft: Ø 25 x 80 mm -Protection class: IP54 -Dimensions: 365/125/H165 mm -Weight: 8.1 kg.

Condition: new, Year of construction: 2026, This is a state-of-the-art CNC machine dedicated to the industrial sector, used for cutting sheets and profiles, using a plasma torch. The machine is characterised, among other things, by a robust structure made of the highest quality steel and aluminium, a large cutting range, the possibility of cutting workpieces of any shape and low process costs. The high-end solutions used in production ensure reliable and safe operation. The cutting of the material is carried out in a short time, while maintaining the precision of the workpiece. In order to obtain the desired shape, it is only necessary to import the file into the software, so operation of this cutting machine is easy and intuitive. Redjiqn Uuspfx Abpscf Our plasma cutting machines are primarily designed to process materials such as: - Black steel, - Stainless steel, CONSTRUCTION The frame of the plasma cutting machine is designed and manufactured from scratch in our factory. The high quality steel used for the machines is cut, then welded and machined. The entire frame, gantry and gantry arms have additional ribbing to achieve high rigidity and eliminate vibration and deformation. DRIVES Servo AC motors with high resolution and power have been used to drive our cutters, ensuring adequate acceleration and speed in each direction. These are highly dynamic and precise motors with feedback, guaranteeing zero defect by continuously controlling the operating parameters. The X and Y axes use classic and well-proven helical bars, which ensure long life and precision. FUEL Our plasma machines use components from the leading manufacturer PGCNC. The technologies used in the torch significantly increase productivity and cutting speed. HD technology provides better hole quality, increased piercing capacity and bevelling capabilities. This ensures high quality, repeatable cuts and maximises productivity with minimal running costs and reliability. KNIFE TABLE The knife table is made with technology that is resistant to working at elevated temperatures. This allows us to work continuously without worrying about the occurrence of burn-outs that prevent the material from being evenly positioned on the work table. The positioning of the scissors can be easily changed according to the size of the workpieces to be burnt. The knife table is an excellent solution for cutting thicker materials. SOFTWARE The machine is equipped with Starfire 2D CAD/CAM software. Various functions are available to the user, including the ability to import finished designs in vector formats: .dxf, .plt, .ai, .eps. The programme ensures fast and precise development of cutting paths. PLASMA SOURCE The basic plasma equipment includes the 120A cutting system, which is characterized by high productivity and cutting quality and speed. AUTOMATIC LUBRICATION SYSTEM Plasma cutting machine equipment also includes an automatic lubrication system that minimizes machine maintenance. The central lubrication system is a simple and functional device used to supply grease to the places where machine and equipment components come into contact. - POWER 400V 50Hz - MAX SPEED 45 m/min - DOOR SHAPE 200-600 mm - TYPE OF WORKING TABLE Knife table - WORKING TABLE WEIGHT 500 kg/m2

Condition: refurbished (used), Year of construction: 2024, functionality: fully functional, travel distance X-axis: 4,000 mm, travel distance Y-axis: 2,000 mm, travel distance Z-axis: 305 mm, warranty duration: 24 months, power: 30 kW (40.79 HP), OMAX MAXIEM 2040 3D, 30 kW MAXIEM Pump and A-JET Tilting Cutting Head Factory-refurbished with manufacturer certification and a two-year warranty. The waterjet cutting system configuration is freely selectable. Feel free to contact us and let us know your desired configuration. Rcjdpfx Abjrm Ilfopjf Customers searching for efficient and cost-effective waterjet cutting systems will find their ideal solution in the Modular Line MAXIEM. These powerful MAXIEM systems combine operational flexibility and affordability, and can be expanded with a broad range of accessories to suit your specific cutting needs. With the modular MAXIEM line, OMAX delivers advanced, reliable waterjet cutting technology at an economical entry price, thereby opening up the advantages of this technology to a wide array of application areas. Leasing with highly attractive terms is available on request, for example, for up to 86 months. - Accuracy up to ±0.05 mm - Software and machine components based on the latest OMAX standards With the 3D A-JET cutting head, the MAXIEM achieves cutting precision of under 0.1 mm. The 3D head enables bevel cuts up to 60° and compensates for cutting angle errors. The machine is currently being factory-refurbished; the images are thus similar to the actual offering. Prompt delivery can be arranged with INNOMAX AG.

Condition: new, Year of construction: 2024, Martin T 54 jointer Only with a good surface planer can you create truly perfect foundations. The T54 was developed with precisely this objective in mind. It enables you to easily plane workpieces at the most modern level and to safely provide them with angular edges. The machine is equipped with a TERSA solid steel cutterhead as standard. The Xplane cutterhead, which operates with a drawing cut, is available as an optional extra. Planing bevels is effortless, as any angle between 90° and 45° can be quickly adjusted with the user-friendly one-hand adjustment. The solid cast iron tables of the T54 provide secure support even for large, heavy workpieces. If you need even more support, you can extend both the infeed and outfeed tables by 380 mm each - of course also in cast iron. Technical data table width: 500mm Table length: 2840mm Maximum chip removal: 8mm cutter: diameter 125mm, 5000 rpm, Tersa Z4 Speed: 5000 rpm Motor power: 5,5kW Rsdpfxspgkmwj Abpscf fence adjustable up to 45 Auxiliary ruler for small workpieces Table adjustment motorized Equipment: T 54 T 5462-a Suvamatic T 541-a Tersa knife shaft 4 knives Location: Ex stock 54634 Bitburg - immediately available -

Condition: new, The scope of delivery includes: Steel panel, new Material color: sendzimir galvanized Total width: approx. 295 mm Rsdpfev Al Utox Abpjcf Total depth: approx. 1,110 mm Inner depth: approx. 1,104 mm for stand depth: approx. 1,100 mm Clear span: approx. 992 mm Traverse support: approx. 55 mm Height of bevel: approx. 25 mm Material thickness: approx. 2.00 mm Weight / piece: approx. 5.95 kg Other quantities on request. Number: - clear width of traverses: 01 piece 02 pieces 06 pieces - 1,800 mm 07 pieces - 2,100 mm 08 pieces - 2,400 mm 09 pieces - 2,700 mm 10 pieces - 3,000 mm 11 pieces - 3,300 mm 12 pieces - 3,600 mm 13 pieces - 3,900 mm 20 pieces 50 pieces 75 pieces 100 pieces Your contact person in our company: Mr: Andre Evering Mr: Mario Klöver Mr: Falk Deutsch General information about the article: This article is only available for collection. Any additional transport or shipping of this article is subject to additional costs, which can be requested separately from us depending on the delivery location or scope of delivery.

Condition: new, diameter -- mm workpiece length -- mm work piece width 15 mm range of angles 15-50 ° plate thickness 6-40 mm total power requirement 1,5 kW Feed speed 3,5 m/min. Rcedpfxek Uqhas Abpjf dimensions 530 x 395 x 860 mm weight of the machine ca. 94 kg The UZ15 RAPID machine is one of the fastest beveling machines with automatic feed on the market. It is not only suitable for workshops, but also for assembly work. It has a stepless Bevel angle adjustment system. Also, the machine with an automatic feed equipped. Working with the UZ15 Rapid is therefore very convenient. - For conventional steel (up to a strength of 600 MPA/ 87022PSI), brass, copper and aluminum materials - For chamfering workpieces with the minimum dimensions of 70 x 150 x 6 mm - Application range of sheet thickness 6 - 40 mm - The bevel angle can be easily adjusted from 15° to 50° continuously without that a part needs to be replaced - Double-sided bevel (X, K) without material handling - Easy connection to the 3D manipulator for easier operation and handling - Silent working - Equipped with automatic feeder - Stationary or mobile use - The machine works with large workpieces without any support a speed of 3.5m/min - Smaller workpieces are placed directly in the machine - Reduced price when purchasing UZ15 RAPID together with the 3D manipulator

Condition: as good as new (ex-display), Year of construction: 2025, One-sided automatic edge banding machine with pre-milling unit, direct glue application to straight workpieces (EVA-PUR Glue pot with run-out function/optional), HF-cut-off saw station with 2xMotors , HF-top and bottom milling unit, corner rounding unit, chain feed, double roller top pressure, extendable work piece support, signal lamp for work piece sequence and synchronisation of working units by encoder. For ABS, PVC, melamine and strong wood veneer roll material as well as fixed lengths from 0.4 – 3.0/6.0 mm and of 8 – 60 mm work piece thickness. Speed: 10,0 m/min.; 8,0 m/min. with corner rounding • 3 spaces for finishing units • 10“ Colour Touch screen →Automatic edge feeding for roller material over turntable D = 800 mm →Longer infeed lineal (650 mm) →Two reverse, operating-controlled pre-milling units with diamond charged helical joining millers provide a neat and tear-free premilling of the work pieces before the gluing of the edge material Rjdpol Rix Nsfx Abpscf →Glue application directly to workpieces: Teflon-coated glue pot with a capacity of 1,5 kg, leak proof with glue supply from below (excess glue automatically flows back into the glue pot). Glue roller allows exact dosage of glue. Separate glue roller temperature adjustment. Electronic temperature control with automatic stand-by function (reduces probability that the glue burns if the machine is not used for a longer periods and is still turned on). Optional: EVA/PUR gluepot with run out / cleaning function for quick change of glue →Pneumatically operated cut-off knife from roll material up to 3mm edge thickness →Automatic feeding magazin (70mm magazin capacity) with spiked roller for solid wood →Pressure unit consisting of one driven pressure roller synchronized with glue spreading roller and two of smaller diameter, conical, one positive and one negative pressure roller with spring tension for a nearly invisible joint of the edge material with the work piece , adjustment of the pressure unit with digital readout. →High-frequency cut-off saw equipped with 2xHF motor 0.55 kW, 12,000 rpm, 2 saw blades and high-precision linear guides ensure a clean and precise saw cut, with extraction hood. →High-frequency top and buttom milling station, 2 powerful 0.55 kW high-frequency motors with HM-WPL special millers; suitable for radius, bevel and flush milling, horizontal and vertical scanning of the work piece; aggregate adjustment equipped with digital readouts for setting to various edge types; 2 extraction hoods for shavings with central extraction nozzle 2 x Ø 100 mm; height adjustment of the upper aggregate with the top roll pressure →Corner rounding unit : Automatic processing of corner edges up to 2 mm edge thickness. Equipped with one high frequency motor 0, 27 kW, selectable on operating panel. One side (front or back edge) or both side corner rounding unit. →Rotatable control panel with 10“ color touch screen controls glue temperature settings, automatic temperature reduction for stand-by function of the machine, switching on and off of aggregates and error diagnosis, incl. digital Meter counter Additional finish aggregates : →Radius scraper unit : With a slight draw cut eventual radius milling traces are removed to provide a perfect finish. The fine adjustment is made by digital readouts. →Glue scraper unit : Removes eventual glue rests with a slight draw cut from the glue joint of th

Year of construction: 1992, condition: excellent (used), machine/vehicle number: 24, Kom.No.: 551.3852 Colours: 6 Equipment / Additional information: Consists of: • Stacker • Printing machine • Cup feeding • Stapler Technical data Printing unit type DW 200-230 Plate cylinder diameter 200 mm Max. possible print image width 110 mm Number of print segments 4 pieces Max. cup rim diameter 130 mm Min. cup rim diameter 70 mm (55 mm) Max. print image unwinding (specific plate unwinding) (361 mm) / D 115 Max. cup height 130 mm Min. cup height 35 mm Max. bevel 10 degrees Production speed depending on cup size, quality and raw materials with UV drying up to 24,000 C/h El. connection value (machine, drying and stacking) approx. 35 KVA El. control with Siemens PLC / control station with 2-line display Voltage is 400V, 3 phase, neutral and ground. 50hz is the frequency. Rjdpfon D E A Tex Abpecf