Used Blow Film Extruder for sale (3,598)

Condition: like new (used), functionality: fully functional, machine/vehicle number: SBO 6/10, Sidel Stretch Blow Moulding Machine Max. output: 6.000 bottles/hour. Max. bottle size: 3.000 cc. Blow stations: 6. Machine is in very good conditioning and well maintained. GENERAL INFORMATION The SBO 6/10 has 6 molds and 10 heating modules. Will work with a wide range of bottle sizes and styles from 0.25 to 3 liters. Sidel 2-step ^PET stretch-blow molders require previously manufactured preforms be supplied to the machine. Separating the bottle manufacturing and preform manufacturing processes allow production to be optimized, provide greater flexibility of operation and use, and provide higher production output rates and yield. MAXIMUM PREFORM DIMENSIONS Neck height 9 – 41 mm (measured from bottom of support ring) Minimum inside diameter of neck 19 mm Maximum outside diameter of neck 34 mm Preform support ring diameter 29 – 51 mm Maximum preform length 210 mm MAXIMUM BOTTLE DIMENSIONS Maximum bottle diameter 130 mm Maximum bottle height 380 mm Bottle capacity 0.25 – 3 liters AVERAGE PREFORM WEIGHTS (non carbonated and carbonated liquids) 0.25 liter bottle 14-20 grams 0.50 liter bottle 20-33 grams 1.00 liter bottle 26-40 grams 1.50 liter bottle 35-51 grams 2.00 liter bottle 44-58 grams 3.00 liter bottle 68-84 grams BLOW WHEEL Height 3.5 meters Number of molds 6 Iaodpjg Ailcsfx Adwol Closing force 10 tons Item height (under neck) at outfeed 1.4 meters approximately Machine DC drive motor power 4 KW HEAT CONDITIONING Height 2 meters Number of oven heating units 10 Number of heating zones per unit 8 Maximum power 170 KW ELECTRICAL USAGE Maximum supplied power 200 KW Average consumption 100-150 KW/hr (varies per bottle being produced) COMPRESSED AIR Supplied power from 7-35 bar Pressure 7 bar Flow rate 50-100 Nm3/hr (varies per bottle being produced) Blow pressure – champagne base up to 25 bar Blow flow rate – champagne base 110-550 Nm3/hr Blow pressure – petaloid base up to 35 bar Blow flow rate – petaloid base 155-770 Nm3/hr CHILLED WATER Temperature 10-12 degrees Centigrade Pressure 5-6 bar Flow rate up to 6 cubic meters/hour Kcal to be removed up to 16,000 Kcal/hour WEIGHT Blow wheel with molds 8 tons Heat conditioning unit 2.2 tons Preform feeder 0.65 tons Electrical cabinet 0.85 tons PREFORM HEAT CONDITONING The preforms are transferred neck up to the heat conditioning device. This unit continuously insures the preforms are inverted before passing, neck down, in front of the heating units and then inverts them again. During the heating phase, the preforms are rotated and their necks protected from the heat in order to optimize the distribution of heat without deforming the neck. Heating is insured by 10 heat modules. Each unit can accommodate up to 8 infrared lamps stacked horizontally whose ends are air cooled. The heating power of 8 zones, corresponding to the 8 rows of lamps, can be controlled in order to optimize the heat profile. These zones are regulated on all SBO Models. After heating, a control by infra-red camera of preform temperature enables regulation of the zones under control, thus insuring maintenance of the required temperature.

Condition: good (used), Year of construction: 1999, operating hours: 17,620 h, Brand: Collin Lab & Pilot Solutions GmbH Extruder model: E 30 M Low Boy Screw type: Single screw Iodsxx Tnpjpfx Adwjal Screw Ø: 30 mm L/D ratio: 25 mm Operating hours: 17,620 h Year of manufacture: 1999

Condition: good (used), Year of construction: 1998, Connected load: 3.3 kW 3/N/PE, 400 V / 50 Hz Air pressure: 7 bar Working height electrically adjustable. Width: 3100 mm Depth: 700 mm Iaodpfx Adjx Exuwewel Height: 900 mm Weight: 740 kg

Condition: used, Year of construction: 2014, functionality: fully functional, machine/vehicle number: M08L/8828, Offer Number: M08L/8828 Machinetype: 3 die - 3 blow transfer header Info: with PKO Make: JERN YAO Type: JBF-10B3S Constr. year: 2014 diameter range: 3-8 mm number of dies: 3 number of stations (incl. cut off): 4 cutting length: 70 mm shaft length under head: 12-60 mm output - pieces/min: 300 press power: 28 t Location: In our warehouse Ijdpfxswi Tduj Adwjal

Condition: not inspected (used), Year of construction: 2007, product width (max.): 400 mm, working width: 400 mm, Shrink Film Packaging Machine Manufacturer: IFP Film wrapping machine for parquet and profile boards Year of manufacture: 2007 Working width: 400 mm (450 mm for the film packaging machine) Consisting of: - Powered infeed table - Wrapping/welding machine for film packaging - Powered intermediate conveyor - Shrink tunnel / hot air oven for shrinking the packaging film Iaedpsx E N N Eefx Adwel - Powered outfeed table Includes: Film roll holder for large rolls Various film rolls (approx. 20 pcs)

Condition: good (used), continuous welding machine, film welding machine -Manufacturer: Rische, continuous welding machine film welding machine Polystar -Type: Polystar 350/5 DSM-TE -Voltage: 220 V -Technical data: see photo type plate Iaodpfxjvyq Duj Adwjl -Dimensions: 520/250/H5600 mm -Weight: 12.1 kg

Year of construction: 2025, condition: new, Complete plastics recycling line for films and fibre materials from Taiwan leading Plastics Recycling Machinery manufacturer. GENIUS Machinery Co who have more than 30 years of recycling extruder production and experience. Extruder can be fed without size reduction or shredding.. Materials in baled, loose or reel form can be fed. Line can be supplied complete with Belt conveyor, Cutter compactor, Main extruder, Filtration system, (variety of types to suit requirements), Hot pellet die-face cutting device, Centrifugal pellet dryer, Vibrating screener, Storage silo for pellets. Additional ancillary equipment can be supplied . A two stage " Cascade" version is also available for heavily printed films, or very dirty films requiring double filtration. Alternative sizes from 100 kgs per hr up to 1200 kgs per hr can be offered. Full sales and support and training is available in UK and Europe for these extremely modern and economic machines. Iaedpfx Aewg R Rtjdwol

Year of construction: 2021, operating hours: 220 h, condition: like new (used), functionality: fully functional, machine/vehicle number: B144, HIGH MOISTURE EXTRUSION (HME) Extruder HME is able to create structured, palatable and nutritious products. Possible industries: - Plant-based Food (Clean label products with great texture) - Pet Food Industry (Wet Pet Food Production, Functional treats and chews, Alternative Protein incorporation) - Aquaculture Feed Industry (Structured aquafeeds, Nutrient Enhancement) - Nutritional supplement and medical foods (High-Protein Supplements) - Snack and convenience foods (High-Protein snacks, Meat-Free Meal Kits) - Sustainable and Alternative Protein Products (Insect and Algae Protein Texturization, Upcycled Food Products) The package includes: • High-quality Clextral HME Extruder • Additional equipment enabling faster start of production Iodpfxox Ac Utj Adwjal Reason for sale: We tried with the project in Plant-based industry in Slovenia and stopped the project in Jan. 2025. Machine was bought at the end of 2021, started operating in H1 of 2022 and worked for only 220 hours. Attached you can find a document with key information about the machine and additional equipment. The machine is in excellent condition ("like new"), used for only 220 hours and meticulously maintained – guaranteeing flawless operation and immediate usability after installation. A catalogue of plant-based products we have manufactured is also included. If you are interested in HME extrusion, we invite you to explore the technical documentation, photos, and VIDEO content available upon request.

Condition: used, Fuji PI1400HS (ECRM VRL36HS), A3 High-Speed Film Imagesetter, HQ-RIP with PC Iodpfox Eka Eox Adwsal

Year of construction: 2022, condition: like new (used), functionality: fully functional, We offer a plastics processing line for sale. 2x hydraulic press 315 t, single-screw extruder 150 mm, 28:1, 132 kW, capacity 400 kg/hour. The extruder comes with a spare frequency inverter. 6 moulds included. The line is almost unused. Very advantageous price for quick negotiations. Full description with photos available on request. Iajdpfx Aoxz Acujdwjl

Year of construction: 2020, condition: excellent (used), functionality: fully functional, Layers: 5 Web Width: 1,500 mm Film thickness range: 10–45 μm Output: - 15 μm: up to 745 kg/h - 17 μm: up to 845 kg/h - 23 μm: up to 905 kg/h Final film widths (per bobbin): - 3 x 500 mm - 6 x 250 mm - 3 x 400 mm - 2 x 750 mm Coextrusion Structure / Number of Layers: 5 layers Layer distribution: B / A / D / A / C Percentage: 10 / 35 / 10 / 35 / 10 % Raw materials: - LLDPE: 2.8–5.0 g/10min (190°C/2.16kg) - VLDPE: 2.8–5.0 g/10min (190°C/2.16kg) Extruder "A": 90/33 L/D, Maximum LLDPE output: 800 kg/h Iodpfxsxyuffs Adwjal Extruder "B": 60/28 L/D, Maximum LLDPE output: 200 kg/h Extruder "C": 60/28 L/D, Maximum LLDPE output: 200 kg/h Extruder "D": 60/28 L/D, Maximum LLDPE output: 200 kg/h Flat die lip width: 2,050 mm Roll width: 2,100 mm Chill roll C1 diameter: 1,600 mm Maximum mechanical speed: 650 m/min MATERIAL FEEDING AND DOSING "A": - 1 main component material feed - 1 additional component material feed - 1 gravimetric batch dosing system (mounted directly on the extruder, 3 components) MATERIAL FEEDING AND DOSING "B, C, D": - 3 main component material feeds - 6 additional component material feeds - 3 gravimetric batch dosing systems (mounted directly on the extruder, 3 components each) Extruder "A": - SML Single-Screw Extruder SML-ES-90/33 - Tool unit: Manually operated screen changer SML-MF-man/90 Extruder "B, C, D": - 3 SML Single-Screw Extruders SML-ES-60/28 - 3 Tool units: Manually operated screen changers SML-MF-man/60 Cloeren 5-layer/3-up Stretch Film System consisting of: - 1 five-layer feedblock FG - 1 automatic flat die, 2,050 mm (for automatic die control) - 1 die splitting system for flat die body separation and cleaning - 1 vacuum box, 2,050 mm - 1 triple-chamber vacuum box SML-TC/2050mm Cooling and take-off unit: - 1 casting section SML-CS/2100/650 - 1 electrostatic edge pinning device - 1 thickness measuring unit (X-ray sensor for automatic dies, stretch wrap film) - 1 recovery system for feeding stretch wrap film with vertical scraptruder for SML 90 mm single-screw extruder - 1 antistatic pipe - 1 power supply unit for antistatic pipes Winding unit: - 1 Cast Film Turret Winder Series W4000 for stretch wrap films - Max. end film width: 3 x 500 mm - Number of turrets: 1 - Number of winding shafts: 4 - Winding shaft diameter: 3" - Max. mechanical winding diameter (3" bobbins): 400 mm - Min. winding diameter: 82 mm - Winding tension: 15–100 N/m - Contact pressure: 50–500 N - Cycle time (3" core magazine): 20–25 s - High-speed Cast Film Turret Winder for stretch wrap film—compatible with 3" air shafts, contact winding mode - 1 automatic core and roll handling system W4000 4S1T (per turret) - 1 oscillating frame SML-OF/2100 Control and data logging: - 1 SML Automatic Control System SML-CS-2/SMILE/4 extruder - 1 SML Data Logging System: SMILE Process Analyzer - 1 E-container (20 ft) Chiller: Frigosystem Compressor unit: MSD V 30-37

Year of construction: 2007, condition: used, functionality: fully functional, For sale: Packaging machines / stretch film machines / stretch film wrappers Package sale 2x Walstar Waldyssa W33, year 1997 1x Walstar Waldyssa B-188, year 2007 All machines are in good condition and ready for use. The equipment was used for packing mushrooms. Packing sizes: Minimum: 90 × 110 × 10 mm Maximum: 200 × 300 × 160 mm Film width: approx. 280 mm to 550 mm Capacity: up to 28 packs per minute On request, a label printer, a weighing station with scale, and two folding machines for cardboard boxes can also be included (not shown). Iajdpfjxz Dr Djx Adwel Transport can be organized at buyer's expense.

Year of construction: 1990, condition: excellent (used), functionality: fully functional, Reifenhäuser extruder Type: RH 51-1-35-25 5.6 kW DC motor 103 rpm Ijdpowxvadefx Adwoal 500 bar melt pressure sensor 3 zone screw 35-25d fully functional

Condition: excellent (used), Year of construction: 2019, functionality: fully functional, Precision winding machine for films and web materials. Designed for consistent unwinding, guiding, and rewinding of roll materials. Integrated safety system with protective glazing, laser start position indicator (green), emergency stop switches, and pneumatic film guiding. Machine frame made of steel, electrically controlled drive. Ideal for production lines in coating or laminating technology. Iasdpfoxzuiysx Adwol

Condition: excellent (used), Year of construction: 2007, functionality: fully functional, screw diameter: 62 mm, Details: co-rotating, degassing, vacuum pump, segmented screws and cylinder, opportunity for side feeder Isdpfx Adexu Dp Njwoal

Condition: ready for operation (used), Technical specifications of Dixi 60 AUTOMAT baler Filling opening (W x H): 1550 x 1000 mm Drive power: 31.5 kW Pressing force: 60 t Bale weight (depending on material): 350–600 kg Iasdpfxjv Amw Nj Adwsl Bale dimensions (W x H x D, adjustable): 1100 x 800 x 300–1600 mm Pressing/cycle time: 13/24 s Machine weight: 7000 kg

Condition: new, Year of construction: 2023, functionality: fully functional, High-Barrier Film: Premium film from a German quality manufacturer – no imported goods! Ideal for producers, co-packers, and fillers with the highest demands for aroma protection and machinability. Product Details: Product type: High-barrier flat film featuring EVOH aroma protection Aroma barrier: Extremely strong – suitable even for citrus aromas Colour: Transparent Roll width: 260 mm Film thickness: 62 µm Core diameter: 76 mm Roll length: 1,000 linear meters Manufacturer: Kaiser Verpackung GmbH Applications: For food products (e.g. spices, tea, snacks, coffee pads); for cosmetics & non-food items; compatible with virtually all form, fill and seal machines; suitable for aroma-sensitive products. Availability & Tiered Pricing (1,000 linear meters/roll): Price per 1,000 lfm (1 roll): 5 rolls – €140/roll 10 rolls – €135/roll 30 rolls – €130/roll 60 rolls – €125/roll 120 rolls – €120/roll Stock: 120,000 lfm Location: Greven Shipping via freight forwarding or collection by arrangement Quick and cost-effective – below current market price. Perfect for your ongoing production! ----- Cardboard Boxes – Remaining Stock Dimensions: 374x374x166 mm 3C450g/m2 (super sturdy!) 5,000 units Price: €0.30 per box when purchasing 5,000 units, smaller quantities available upon request We also offer matching jars for sale; each carton fits 32 pieces of 400 ml jars: ----- PET Jars from German brand manufacturer OBECK: Material: PET (Polyethylene terephthalate) Colour: White Volume: 400 ml Diameter: 93 mm (SP400) Height: 81 mm Weight: 36 g Suitable for food & recyclable Matching PP Lids: Type: Screw cap (Smooth 89SP400) Material: PP (Polypropylene) Iajdpfx Aox A S A Hedwel Colour: Black Height: 14 mm Applications: Food packaging (spices, nuts, protein powder); cosmetic products (creams, lotions, masks); dietary supplements (capsules, powders); industrial use (chemicals, paints, adhesives) Prices (per jar and lid set): 2,880 pcs – €0.35 each 5,760 pcs – €0.32 each 11,520 pcs – €0.30 each 20,160 pcs – €0.26 each 48,960 pcs – €0.22 each 100,800 pcs – €0.20 each 400,320 pcs – €0.18 each Minimum order: 2,880 pcs (2 pallets) Stock location: Greven Shipping: Freight forwarding or collection (by arrangement) Quick sale – We need storage space and are significantly cheaper than the manufacturer. Secure below-market deals now! If interested or if you have any questions, please get in touch!

Condition: used, Year of construction: 1992, Automatic PET bottle blowing machine Manufacturer: SIDEL Type: SBO 4 S1 Year of prod. 1992 Capacity: 4,000 for 1.5 L / 2 L bottles Installed power: 150 kW Includes 1.5 L molds Preform feeder Isdpfx Aewa Rhrsdwjal Technical condition: used machine, starts up, program is functional

Year of construction: 2023, condition: like new (used), Our compact extruder model EX20-25d Manufacturer: PMH GmbH Screw diameter [mm] 20 Screw length [L/D] 25 Screw speed [min-1] 10-192 Screw nitrided Torque 55Nm Drive Three-phase drive with frequency converter Drive power [kW] 1.1kW Barrel material: nitrided Electrical connection values 3 / N / PE Supply voltage [V] 400V at 50 Hz Isdpfxeq R Tkwo Adwjal Control voltage [V] 24V Ceramic heating tapes [W] 1200W Number of heating tapes 3 Max. Output approx. 5kg/h Max. Processing temperature [°C] 300

Condition: excellent (used), functionality: fully functional, Technical data: Operating voltage: 400V AC Main fuse: 50A Frequency: 50Hz Connected load: 19.1kW Control voltage: 24V DC Compressed air: 6 bar Production capacity: 20 x 2m modules/h Degree of automation: fully automatic Installation dimensions: 12.5 x 5.2 x 4m (Width x Height x Depth) Stations: Decoiler: This station loads the coil and unwinds the product part. Manufacturer: Robust Habicht & Heuser GmbH & Co. KG Type: URM-1400 Cosmetic tape applicator: Application of a cosmetic tape to the rear module edge of the product part using an applicator. Manufacturer: Printum Laser cell: Creation of contact openings on the rear module edge of the product part using a laser, and inspection of correct contact opening with pneumatic Ignun contact pins. Iaodpfoxzug Sjx Adwol Manufacturer: ACSYS Lasertechnik GmbH CO² Laser INLINER II 40W CO2 Inspection station: Empty cell for conducting tests on test material. Transfer tape applicator cell: Application of a transfer tape to the rear module edge of the product part using an applicator. Contact strip applicator cell: Insertion of preforms (solder pads) into the opened contact openings, followed by application of a contact strip to the rear module edge of the product part using an applicator. Soldering station: Establishment of electrical contacts by soldering the preforms (solder pads) to the contact strip. Manufacturer: ATN Automatisierungstechnik Niemeier GmbH Flasher station: Testing the functionality of the product part using a flasher and simultaneous contacting with pneumatic Ignun contact pins. Manufacturer: WAVELABS Solar Metrology Systems GmbH Type: WLAAA0039 Designation: Module flasher Empty cell: Currently no processing of the product part. Recoiler: This station loads the coil and rewinds the product part. Manufacturer: Robust Habicht & Heuser GmbH & Co. KG Type: URM-1400

Year of construction: 2016, condition: as good as new (ex-display), Kategorie / Category: Doppelschneckenextruder / Twin-screw extruder Nummer / Number: DE27621 Hersteller / Manufacturer: KraussMaffei Berstorff Type: ZE 110 R x 28D UTmi Year of manufacture: 2016 like new, less than 100 operating hours Screw diameter / Screw diameter: 2x Ø 127,0 mm Iaodpfx Adsiux Nmswel L/D: 28:1 (extension of the processing unit possible / extention of processing unit possible) Antrieb / Motor: 250,0 kW (AC) - Wasser gekühl / water cooled Details: co-rotor, screw speed: max. 300 rpm, degassing, 2x Busch vacuum pumps MM 1202 A VA3, segmented screws and barrels, 1 x Berstorff ZSFE 120 side feeder - Control system: Siemens S7 with screen control The offer does not meet your expectations? Please visit our website Plama or send us your detailed inquiry, we have the right product for almost every budget.

Condition: like new (used), 8 impact bars for HAZEMAG APK50 mill Iajdpfxov N T Ihe Adwel Model: HAZ971 Each weight: approx. 146 kg

Condition: used, Year of construction: 2007, Used Blow Molding Machine SIPA SFR12 18000 bph Iaodpfoxqmp Rjx Adwol General Features of the SIPA SFR12 Blow Molding Machine The Used Blow Molding Machine SIPA SFR12 18000 bph performs PET container stretch blow molding and SIPA manufactured it in 2007. As a result of its SFR12 configuration, which includes 12 cavities, the system reaches a nominal speed of 18,000 bottles per hour. Consequently, it delivers high production efficiency across multiple formats. Specifically, this machine processes volumes from 0.25 to 2 liters. Therefore, it fits seamlessly into high-speed bottling lines, particularly in the mineral water and soft drink industries. Moreover, thanks to its compact layout, it optimizes floor space usage. Preform Compatibility and Technical Specifications This machine processes preforms with 3-start Alaska neck finishes and supports weights ranging from 12 to 34 grams. In particular, operators can quickly change formats thanks to the integrated quick-change system, which significantly reduces downtime. In addition, the automated system feeds, tips, and orients the preforms accurately. As a result, the machine ensures a continuous and correctly aligned flow into the heating and blowing stations. Furthermore, this setup minimizes manual intervention and improves process reliability. Notably, the Used Blow Molding Machine SIPA SFR12 18000 bph maintains stable, uninterrupted production across varying operational conditions. Integrated Systems and Automation The machine uses a Siemens PLC for core process control; thus, it guarantees reliable and intuitive management in industrial environments. Furthermore, the system includes certified safety protections, which enhance operator safety and regulatory compliance. Additionally, the air recovery system reduces energy waste and lowers operational costs. Equally important, the rotary blowing system distributes pressure and heat evenly across all cavities. Hence, the machine ensures uniform container quality even during high-speed operation. In comparison to older models, this version offers improved thermal control and air distribution efficiency. Operational Status and Technical Documentation Currently, the Used Blow Molding Machine SIPA SFR12 18000 bph remains in storage, although it is ready for recommissioning after standard inspection or overhaul. Fortunately, the machine includes original technical manuals, available spare parts, and revision records, which together facilitate seamless installation and integration. Moreover, the documentation enables faster troubleshooting and efficient maintenance scheduling. Technical Summary for Line Integration Overall, the Used Blow Molding Machine SIPA SFR12 18000 bph delivers a robust and high-performance solution for production facilities that require consistent, flexible, and high-throughput blow molding. Because of its solid engineering and standard-format compatibility, it serves as a strategic asset for companies looking to upgrade or expand bottling capacity. Furthermore, the availability of auxiliary components and spare parts, along with comprehensive documentation, allows for rapid and reliable integration. Ultimately, this machine enhances line performance while supporting operational continuity and cost-efficiency.

Year of construction: 1997, condition: excellent (used), functionality: fully functional, Used Reifenhäuser extruder Type: RH-241-1-50-30 WE Grooved feeding zone With manual screen changer Fully functional Isdpfx Adow Np Tkowsal

Condition: excellent (used), Stations/Equipment: Unwinder Rewinder Extraction system incl. shredder (4x Lundberg Type WT200-200U - year 2018) Inert enclosure Busbar laminating unit Cutting units Laminating units / adhesive application units Heated rollers Iasdpfx Adoxzufhewel Master computer Control cabinets Drive motors Gantry crane Corona treatment