Used Bolt Gun for sale (3,195)

Condition: new, Grundfos CM5-5A-R-I-V-A00V-F-A-A-N centrifugal pump Viton version, unused, 100% functional, scope of delivery as per photos Bedpsuqr Hhefx Abtjdg

Condition: used, Year of construction: 1993, Overview The GM Gera NAGEMA Arcade DS bottle washer was previously used in a brewery. There it was operated in single-shift operation. Since the sales volume has decreased, the beer of the brewery is now bottled at another location and this bottling line has become available. Due to the low number of operating hours and regular maintenance, the machine is in a very good condition. All basins and the machine body are made of stainless steel. Spare parts, such as bottle cells, are also still available. Furthermore, the main drive shaft, as well as the motor and gearbox were overhauled by SEW in 2018 and the carrier chain was replaced in 2015. The machine is still mounted and can also be demonstrated. Tech Specs: Capacity: 23,000 bph Cell pitch: 85 Bottles per row: 16 Dimensions + weights with attachments: 8640 x 4470 x 1920 mm / 17,900 kg Details: Standard drives Heating with steam Operating side left CE certified Chemistry dosing pumps Machine data sheet Fixed pipe spraying controlled by machine cycle Single-end machine Label discharge rear right Finger discharge + finger feeding Bottle discharge left Bottle cells plastic HMI Lauer Lye concentration measurement 24 Volt control voltage Control S5 (on request conversion to S7) Regularly maintained Water part in VA Fume extraction Sampling taps KSB pumps in VA Plug-in strainers for baths Water meter Conductivity measurement from Endress Additional Equipment: Spare parts included   Bedpfx Ael Hx Adsbtjdg

Condition: used, Year of construction: 2013, Overview The bottle washer was manufactured by the German company Krones in 2013 and put into operation in 2014. It has been serviced annually. In addition, tenside lye cleaning and spare parts can still be purchased. DISMANTLING INCLUDED. Technical data  Capacity: 66,000 bph Maximum bottle diameter 69 mm Set up for the following formats:  Vichy 0,33l Long-Neck 0,33l Long-Neck 0,5l NRW 0,5l  Steinie 0,33l Bodpfxol Hx Ene Abtodg

Condition: ready for operation (used), Bosch VMA 70 CR 001-D supply module, 1070070783-507, serial number: 003253676, used, shows normal signs of wear, 100% functional, scope of delivery as shown in the photos. Bdodpfxok Hd I Ee Abtog

Condition: good (used), Chuck flange, flange holder, lathe chuck flange, driving flange -Chuck flange: for three-jaw chuck, four-jaw chuck, faceplate -Outer diameter: 315 mm -Adapter: Short taper 6 / cone 103 - 105 mm short taper flange with Camlock fastening -Bolt circle: Ø 135 mm -Dimensions: Ø 350 x 90 mm Bdodpjt Sz Evjfx Abtog -Weight: 19 kg

Condition: new, Allen Bradley 1333-MOD-KB4 Heavy Duty Dynamic Braking Unit, unused, in original packaging, 100% functional. Bodoi D Tzaepfx Abtsdg

Condition: used, Technical data: Printing width: 600 mm Colors: 4 Bdodpfx Aoxxmz Nebtjg Chamber doctor blade units: 3 Application: Inline with bag-making machine Condition: used

Condition: excellent (used), Year of construction: 2024, machine/vehicle number: 16663, water tank capacity: 85 l, battery voltage: 48 V, sweeping width: 1,250 mm, fuel type: electric, construction height: 1,100 mm, product width (max.): 1,030 mm, 175795 Serial Number: C70S2409003 Bjdpfexubigsx Abtodg Battery Details: 48 Volt 52 AH

Condition: good (used), Faceplate, faceplate chuck, four-jaw chuck, face turning chuck -Faceplate: Chuck size Ø 200 mm -Mount: Short cone 4 / Cone Ø 61-63 mm Short cone flange with camlock fastening -Bolt circle: Ø 82 mm -Through hole: Ø 41 mm -Dimensions: Ø 200 x 125 mm -Weight: 9.5 kg Bodpfx Abjxuflfotjdg

Condition: new, Year of construction: 2025, functionality: fully functional, maximum load weight: 200 kg, warranty duration: 24 months, Available ex-stock Switzerland – immediate delivery! 24 months warranty Net capacity: Cleaning area: D=900 mm Internal height: 530 mm Loading weight: 200 kg Machine body, internal piping system, control cabinet and washing basket made of stainless steel - 2 washing pumps for efficient cleaning - Weekly timer for heating - Electronically controlled basket drive - Level control - Lid locking mechanism - Removable filter plate Accessories: 1x transport trolley with pull-out basket Steam extraction Automatic level top-up Oil skimmer, model WE Draining device / floor flushing with hoses and manual ball valve Bodpfew Ic Hnox Abtjdg

Condition: new, Year of construction: 2026, Please fill in the attached form so that we can make you a suitable offer. If you have any further questions, please do not hesitate to contact us. These conveyors can be manufactured according to the required purposes and dimensions. As the general structure and belt system, hinged belt conveyors are long-lasting as long as maintenance is done regularly. Hinged Belt Conveyors are used to convey a wide range of long, coarse, curled and crumb type chips from transmission steel, work tool steel, aluminium alloy metal as well as other materials such as Teflon, Delrin, etc. Hinged belt conveyors are the most commonly used type of chip conveyors. These are the systems designed for the purpose of conveying chips coming out of the production process and separating cutting oil/coolant from the chips. Hinged belt conveyors can be manufactured with or without a tank to return cutting oil/coolant to the system. In our standard production we use four types of chain pitches 31.75 , 38.10 , 50.80 , 63.50. Chain pitch is decided according to the amount of chips to be conveyed and the width & length of the conveyor, motor and gearbox are selected according to the amount of chips to be conveyed per hour. Coolant recycling is taken into account in this selection. The conveyor can be controlled from a panel or from the CNC control of a machine tool by using a socket connection. Our chip conveyors are manufactured for our sales brand "GERD WOLLF Maschinenfabrik", by a renowned manufacturer from Turkey. The pictures are for orientation purposes only and are not true-to-scale representations of the machine. Bsdpfxsy S D Ngo Abtodg

Condition: new, In addition to standing a PDF document, see the description of positions - Prices on request! RUCHSER standard offer with layout for a wooden window production with being milled Glass bar and screwed corner joints. Daily capacity approximately 15 Window Manufacturing consisting of: Item 1.0 - Item 107 850 000 RU-PWD-H1600/130/4 profile carriage double-sided Length 1600 mm, width 850 mm, height 2140 mm for horizontal position round and transport of Profile sections. 12 support arms each column welded to the column, 2 adjustable center column, clear spacing of the support arms 130 mm, Depth of the support arms on each side 400 mm, Support arms covered with felt, with 4 plastic swivel castors, diameter 150 mm, of which 2 with stop means. Item 2.0 - Item 0150001 RU-M rotation - tilting table manually tiltable bearing surface 1300 x 1400 mm, with 4 plug extension 1000 mm long, including tool tray without weatherboard- ausspaarung. Item 2.1 - Item 5009-1 2 trays with 2 drawers (for RU-4, RU-2/4) Item 2.2 - Item 5062-1 Extract left and right 500 mm and up to 7000 mm folded down with one support leg Item 2.2 - Item 5012-1 Hinged extension tubes Length 700 mm (max. 3 pairs) Item 2.4 - Item 6125-2 Corner mounting fixture AoE attacks rectangular pneumatic lowered with clamping unit for 2 profiles mounted on RU-M Item 2.5 - Item 2069-1 tilting instead of manually, pneumatically operated Item 3.0 - Article 10.782 million Bdedpfx Aeytx Ursbtsg RU-EW-2S two-sided vehicles in stock Storage capacity max. 36 piece sash L - shaped screw, length 1200 mm, Depth 800 mm, height 2200 mm, edition of Holme felted, 4 swivel castors, 2 with brakes Item 4.0 - Item 6600000 RU-KWI-1000 Commission cart unladen be nested, Length 1120 mm, width 1100 mm, working width 850 mm, height 1900 mm, Plant height 1500 mm, bearing capacity 750 kg mobile on 4 plastic castors, Diameter 150 mm, 2 with Stop device, 2 drawers on the left and right each 350 mm in length, max. 1800 mm and Height max. 2100 mm Item 5.0 - Item 740-300 RU-DH-F2 double reel cart for 2 rolls to roll size 620 x 350 mm (without coil) to roll size 800 x 350 mm (with coil) with 4 swivel castors, 2 with stop device Item 5.0a alternative to Item 5.0 - Item 744-200 RU-DH-F4, double coiler car for 4 wheels to roll size 620 x 350 mm (without coil) to roll size 800 x 350 mm (with coil) with 4 swivel castors, 2 with stop device Item 6.0 - Article 7.36 million RU-BW-1200-fog Cart with 16 divisions, length 1200 mm, Width 700 mm, height 1100 mm, with 2 shelves, mobile on 4 Plastic castors with a Diameter of 125 mm, 2 with stopper Item 7.0 - Article 10.0092 million RU-FMOG / K wing mounting rotary tilting table * for wings with attached bar and milled glass Bolt on corner joint. Rotary-tilting table with pneumatic tilting device and 6 piece sliding vacuum suction cups. Adjustment range in width from 4...

Condition: used, mileage: 6,96,000 km, power: 440 kW (598.23 HP), first registration: 12/2009, fuel type: diesel, fuel: diesel, Year of construction: 2019, SCANIA G 440 LB 6x2 4MNA ADR with Steering/Lift Axle, WILLIG Superstructure for Used Oil and Filter Disposal with Tilting Tank !! EXCELLENT CONDITION !! ADR Hazard Classes: FL, EX II, EX II, OX, AT Chassis: • EURO 5 • Displacement: 12,740 cm³ • Engine Power: 324 kW / 440 HP • Axle Configuration: 6x2 • Lift/steering axle (3rd axle) • Retarder • Cruise control • Automatic climate control • Auxiliary heater • OPTICRUISE automated transmission with clutch pedal • Differential lock • TC – Traction control / switchable • Hill start assist • Warning beacons • Exhaust gas recirculation • Multifunction steering wheel • Reversing camera • Airbag • Radio / CD player • Roof hatch • ALU tank: 300 liters • GVW: 26,000 kg (28,000 kg technically possible) • Unladen weight: 13,300 kg • Gross train weight: 12,700 kg! • Wheelbase: 4,600 mm Tyres: • Front axle: 385/65 R22.5 • Rear axle: 315/80 R22.5 • Lift axle: 315/80 R22.5 • Tread depth: 12/13/12/13/12/11/6/6 mm Tank Body WILLIG Type HL 250 • 2-chamber system with filter presses • 2 x discharge racks • Rear loader with 2 arms for 2 containers of 120 / 240 liters each or 1 x 1,100 liters • Arm load capacity: 300 kg • Max. operating pressure rear loader: 110 bar • Tiltable tank body with hydraulic ram Bjdpfownz Dtjx Abtodg • Total volume: 11,000 liters • 3 chambers with level indicator • Chamber 1: 2,000 liters / max. fill: 1,920 liters • Chamber 2: 1,500 liters / max. fill: 1,440 liters • Chamber 3: 7,500 liters / max. fill: 7,200 liters • ALU fittings cabinet • Bottom valves • Vogelsang pump: suction + pumping • Centrifuge • Hydraulic hose reel at rear • Additional central outlets at rear • Control box / operator cabinet rear left • Remote control for tipping and draining + manual control with levers! - German vehicle! - 1 owner from new! - MOT + Safety Inspection: new! - ADR: new! - Tank inspection: new! - Ready for operation! Errors and prior sale excepted! = More information = Price: On request Please contact Joannis Arpantzanis or Kai Bühler for further information.

Condition: good (used), The scope of delivery includes: 1x bracket for rear wall grid, used Material color: hot-dip galvanized Internal designation: Variant 1 Diagonal length: approx. 410 mm Total width: approx. 90 mm Overhang: approx. 225 mm Material thickness: approx. 3.00 mm Weight/piece: 0.71 kg 2 elongated holes: 50 x 9 mm (W x H) Height: 30 mm Bdsdpjzuyr Hefx Abtsg General information about the item: This item is offered for pick-up only. Any additional transport or shipping of this item will incur extra costs, which can be requested separately depending on the delivery location and scope of delivery.

Condition: ready for operation (used), functionality: fully functional, For sale is a special-purpose machine—a complete production line for manufacturing heating elements. The production line was designed and built by Bosch itself. The heating elements are suitable for use in instantaneous water heaters. You can see an image of these elements in the second picture of the gallery. Bsdpfszvfiyox Abtodg The production line also includes a testing station. According to our checks, all required documentation is available. Transport and loading can be organized throughout Europe for an additional charge upon request. Prices are subject to VAT. Inspection is possible by appointment. Please contact us—our team looks forward to assisting you. Machinery Buying / Selling PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINERY, MACHINE TOOLS, ETC. Are you looking for a high-quality yet cost-effective machine for your production? Or are you looking to sell your equipment? For more information or contact options, please reach us via the contact form.

Condition: ready for operation (used), Siemens C79451-A3247-B71 power supply C4 051722, used, 100% functional Bsdpfx Abezu En Totsdg

Condition: ready for operation (used), Siemens Simodrive 6SC6100-0GC08 462 010.9062.08 power supply, used, in good condition, 100% fully functional, scope of delivery as per photos. Bdjdpfx Abezu Ew Uotsg

Condition: new, Siemens Teleperm M 6DS1000-8AA power supply output 17 > unused < in opened original packaging, 100% functional Bdodpfxszu E E Eo Abtsg

Year of construction: 2020, condition: good (used), Gough Engineering Sieving station and filtration unit Bodpfezvlk Dox Abtjdg Stainless, sieving station with WMF dust extraction unit, 555mm diameter mesh, 3Ph

Condition: good (used), Year of construction: 1999, Kohlbach – Hydraulic discharge system with push rods 1. System description The two-beam hydraulic discharge system is used for the uniform and continuous discharge of wood chips from a rectangular fuel silo. Bdsdszl Hqkepfx Abtsg The discharge shovels transport the material through alternating hydraulic lifting movements to feed the heating boiler, thereby ensuring a consistent fuel supply. 2. Main dimensions Silo length: Version with 6 discharge shovels: 7.50 m Width of shovels: 900 mm Shovel depth: 250 mm Shovel height: 70 mm 3. Drive and operating principle Hydraulic drive with 2 hydraulic cylinders Automatic, alternating lifting control, synchronized with the boiler control 4. Connections Material discharge into a central collection channel Further transport by means of a screw conveyor or chain conveyor Connection to the heating boiler: DN 315 5. Installation requirements Industrial floor in MONO-FINISH quality with a levelness tolerance of ±5 mm Foundation plates, ceiling openings and cladding to be carried out on site Sufficient service access for the hydraulic unit must be ensured 6. Advantages Reliable operation with wood chips of different grain sizes and qualities Consistent fuel feed for stable 24/7 continuous operation Low maintenance effort The system is dismantled and ready for loading onto the truck. The discharge system does not require special transport because: the discharge beams can be disassembled into 6.3 m long segments, the transport width is significantly below 4.24 m, as the beams are removed individually, the discharge shovels can be dismantled, transport with a standard semi-trailer is possible. Inspection in our warehouse in Szentendre/dismantled is possible after prior arrangement.

Condition: new, Siemens 6EW1160-5AF power supply, internal mounting unit. A 2025254, used, with normal signs of wear, 100% functional, scope of delivery as shown in the photos. Bdodpfxoi Edwus Abtjg

Condition: used, Year of construction: 2021, Used MOC cleaning system, type Cleaning System 100. Continuous degreasing system for use with aqueous cleaning agents or emulsions. The machine is powered and can be inspected by appointment! Technical data: Year of manufacture: 12/2021 Manufacturer: MOC External dimensions: Length, max.: 1,500 mm Width: 1,500 mm Overall height: 1,700 mm Infeed height: 900 mm Usable size: Width: 650 mm Height: 300 mm Belt design: wire mesh in stainless steel Energy data: per station Power: 2 kW Pressure, max.: 3 bar Caustic solution flow rate: 7.5 m³/h Transport drive: 0.5 kW Max. load: 20 kg/m Speed: 1.4 m/min, adjustable with oscillation Tank volume: approx. 500 l Heating: 18 kW Connected load: approx. 25 kW Material: Stainless steel 1.4301, all parts in contact with the medium or corrosion-resistant Special features: Cabin structure: in a robust steel construction Bdsdpfx Abozicl Eotog and with all necessary inlet and outlet connections including a 100 µm filter in the return line and sludge collection rings with drain and overflow 1 heating unit with thermostat, electric 1 complete pumping unit, piped Pump with base plate and motor 1 set of nozzles 1 set of PVC aprons, easily removable 1 drain per tank with manual ball valve 1 blow-off station with on-site compressed air, flat jet nozzles and air ducting Electrical control cabinet The control cabinet contains all contactors and fuses with VPS control

Condition: excellent (used), functionality: fully functional, Panel saw Maximum cutting size: 5300 × 2240 × 80 mm Maximum cutting depth: 80 mm Saw motor power: 5.5 kW (7.5 HP) Saw blade diameter: 300 mm Saw blade mounting hole diameter: 30 mm Acoustic pressure level at the workstation (LpA): 83 dB Blade speed: 4800 rpm Number of dust extraction nozzles: 1 × Ø 140 mm Compressed air connection: 6–10 bar Connected power: 7.5 kW Electrical supply: 3 × 400 V / 50 Hz Bdsdszkh R Njpfx Abtjg Overall machine dimensions: 6620 × 3010 × 1742 mm Saw weight: 1100 kg

Condition: new, Siemens 6FC5114-0AA01-1AA0 power supply, E Stand F, serial number: 1490835, unused, in open original packaging, 100% functional. Scope of delivery as shown in the photos. Bdodsi Edypepfx Abtjg

Condition: ready for operation (used), Bosch VM 60/R-T power supply module, serial number as shown in the photo, professionally and completely overhauled and tested, with a 12-month warranty, 100% functional. Scope of delivery as shown in the photos. Bdjdpfxsi D Uhrj Abtog