Used Book Sawing Machine for sale (66,592)

Condition: good (used), Year of construction: 1987, functionality: fully functional, saw blade diameter: 375 mm, cutting range round steel at 90°: 135 mm, total length: 850 mm, total height: 1,800 mm, total width: 1,100 mm, overall weight: 680 kg, Semi automatic circular saw, blade Ø 375 mm, capacity Ø ca. 135 mm, motor 3,0 / 4,0 kw 2-speed 1420/2880 rpm, hydraulic vertical clamp, 1 horizontal clamp, stops 30°, 45°, 60° 90° double side, coolant device, measuring device 2 meters; dimension 85x110x180 cm, weight ca. 680 kgs Duedpfsx Dl Dmsx Agfor

Condition: used, Vertical band saw PEHAKA type SM 4 make no. 27060 year of construction approx. 1980 throat 380 mm table size 620 x 480 mm Duodpfx Aeiv A U Ejgfor cutting height 250 mm roller diameter 400 mm working height 1120 mm saw band length min. 2900 - max. 3100 mm saw band speed 22-125 m/min. infinitely variable motor power 0,6 / 0,75 kW mains connection 380 volt, 50 Hz - infinitely variable saw band speed via Vario belt drive with lever adjustment and 2 motor speeds - saw table tiltable +/- 15 - Saw blade butt welding machine IDEAL BS 0-16 - Saw blade shear - substructure made of U-steel 100 x 50 mm , movable with lift truck space requirement L x W x H 1050 x 800 x 1950 mm weight 355 kg good condition

Condition: used, Miter cross-cut saw for aluminum (special machine construction with 4 servo motors) Duodjdzp T Djpfx Agfor Circular saw, miter saw, rip saw year of construction 2002 Saw blade diameter 500 mm Sawing range at 90° round Ø 180 Rectangle 350 x 140 mm (through longitudinal cut) Sawing range at 45° round Ø 180 Rectangle 350 x 100 mm (through longitudinal cut) Guide length of base support 1100 mm Travel on the base support (forwards and backwards) 650 mm Travel on the stand (up-down) 120 mm Saw blade speed approx. 3000 rpm Motor power 2.2 kW Mains connection 400 Volt, 50 Hz - Controlled longitudinal cutting movement - Controlled saw blade height adjustment - Controlled mitre cut through swivelling saw unit - Controlled miter cut by tilting saw unit - Pivoting and tilting of the saw via INDRAMAT servomotors with precision gears (MKDO71B-061-KG1-KN and MKDO41B-144-KP1-KN motor) - Vertical axis movement via INDRAMAT servomotors and ball screws (MKDO41B-144-KP1-KN motor) - a total of 4 Indramat servomotors are installed - very good German mechanical engineering Space requirement L x W x H 1150 x 1100 x 1400 mm weight approx. 360 kg good condition The unit comes from a special machine for special products. All other components and electrical parts for the construction of a new special machine are also available.

Condition: new, saw blade diameter 550 mm Number of revolutions 3580 r.p.m hole of sawblade 32 mm Control NC total power requirement 3 kW weight of the machine ca. 250 kg required space 980 x 1130 x 1430 mm The Gerd Wolff AC 550 is an automatic aluminium cutting machine which is manufactured for our sales brand "GERD WOLLF Maschinenfabrik" by a renowned manufacturer from Türkiye. Schnittbereich 90° rund: 155 mm Schnittbereich 90° quadratisch: 155 x 155 mm Schnittbereich 90° rechteckig: 260 x 200 mm Schnittbereich 45° rund: 130 mm Schnittbereich 45° quadratisch: 130 x 130 mm Schnittbereich 45° rechteckig: 180 x 200 mm Standard Accessories - Location points for 15° – 22.5° – 30° – 45° – 67.5° - Fixing handle for locking at intermediate angles - Adjustable cutting speed for different types of profile - Saw covering with safety switch - Belt propulsion saw - Two hand safety operation - Easy to change saw blade - 2 x Pneumatic vertical piston with clamps - 1 x compressed air gun Optional Equipment - Hydrocheck – Hydraulic speed adjustment for aluminium profiles - Cooling system for aluminium cutting - Auxiliary conveyor with rulers Dsdpfx Agoymf Tbsfsur

Condition: used, Year of construction: 2023, Used machine Year of manufacture 2023 Technical data: Sliding table length 3200 mm Cut length sliding table 3200 mm Cutting height at 90° max. 155 mm at 46° max. 105 mm Dusdew Nacvepfx Agfjr Cutting width at rip fence 1250 mm Length stop on cross slide extendable up to 3500 mm Saw blade diameter max. 450 mm Saw blade diameter (retractable under table) ø 400 mm Table size cast iron table top 1200 x 655 mm Table extension plus 750 x 655 mm Table widening 1430 x 940 mm Table height / working height +/- 20 mm 900 mm Motor power 5.5 kW / 7.5 HP Main saw blade speed 3000 / 4000 / 5000 / 6000 rpm Voltage 400 V / 50 Hz Space requirement 7000 x 3500 mm Weight approx. 1150 kg Options: Motor 7.5 kW Tele-Digit length stop With central digital wireless display 0.1 mm in the low-power system for both stop flaps up to 3000 mm instead of the standard length stop Double-sided miter stop DSG A For angle cuts 0° – 90° on the aluminum double sliding table, length and angle measurement adjustable via scale; for cross cutting up to 1375 mm with length compensation for preferred angles 5°, 10°, 15°, 22.5°, 30°, 45°, 60°, 67.5°, incl. splitter wood, wall holder and an additional factor scale for easy calculation of incorrect miters for different workpiece widths Swivel device for the cross slide Quick ergonomic pushing into the park position 2 clamping clamps for sliding table Current list price: 46254.- Availability: short-term Storage location: Flörsheim

Condition: like new (used), Year of construction: 2015, functionality: fully functional, For sale is a Renz DTP 340 A punching machine from 2015, in like-new condition and barely used. The machine comes with 2 punching dies and is ideal for wire binding, bookbinding, and copy shops. Duedpfjytx D Hjx Agfor Details: • Manufacturer: Renz • Model: DTP 340 A • Year of manufacture: 2015 • Condition: Like new, low usage • Includes 2 punching dies (3:1 and 2:1 pitch) • Electric operation • Precise punching for professional finishing Price: €4,500 negotiable Viewing / test run possible by appointment. Renz DTP 340 A Electric Punching Machine – 2 die combs, almost new, €4,500 negotiable If you have any questions or need more information, feel free to send us a message or give us a call. 10 machines available – excellent bulk price if you take all. Quick deal preferred!

Condition: excellent (used), Year of construction: 1900, functionality: fully functional, Antique Spindle Press / Book Press – 480 × 630 mm Press Area, Heavy-Duty Construction, 2 m Tall _____ Description: For sale: Antique spindle press / book press, robust and heavy-duty construction, ideal for printing houses, bookbinding workshops, or general workshops. Specifications: • Press area: 480 × 630 mm • Height: approx. 2 m • Spindle stroke: approx. 105 cm • Construction: heavy, sturdy industrial design → extremely robust, industrial-grade • Year of manufacture: antique, estimated early to mid-20th century (1900–1950, exact year difficult to determine due to missing nameplate) • Location: ex works Salzburg, Austria • Viewing possible by appointment Dusdpfeytxvpox Agfsr • As an antique machine, value is not only functional but also collectible • Application: bookbinding, printing houses, embossing workshops, leatherwork, paper processing Price: Asking €3,200 (negotiable) Antique Spindle Press / Book Press – 480 × 630 mm Press Area, Heavy-Duty, 2 m High If you have any questions or need further information, please feel free to send us a message or call us. 10 machines available – excellent total price for buyers purchasing all units. Quick processing preferred!

Condition: excellent (used), Year of construction: 1978, functionality: fully functional, machine/vehicle number: 30610, We are offering this very well-maintained E. Bickel K.G. Heilbronn HK 3/50 creasing and perforating machine, year of manufacture 1978. Details: • Working width: 50 cm • Machine serial no.: 30610 • Supplied with 2 additional perforating combs • Robust industrial quality, reliable for paper and cardboard processing • Location: Salzburg, Austria • Viewing possible by appointment • Suitable for: bookbinderies, printing houses Price: Negotiable €2,250 Dedpeytxulofx Agfsur Electric Creasing Machine E. Bickel HK3/50 – 50 cm Working Width, 2 Perforating Combs, 1978 If you have any questions or need further information, please feel free to send us a message or call us. 10 machines available – special total price when purchasing all. Prompt transaction preferred!

Condition: used, Year of construction: 2001, For sale: Reiner Diez AWS 6050 CS Full Carton Sealing Machine, year of manufacture 2001, used equipment, ex works. Details: • Fully functional carton sealing machine • Light barrier control system for precise operation • Sealing width: 620 mm × 500 mm • Product size: up to max. 600 mm × 420 mm × 150 mm (L×W×H), depending on type and size of product • Robust industrial quality, ideal for production and packaging lines • Location: Salzburg, Austria • Inspection possible by appointment • Applications: manufacturing or packaging lines, companies that regularly seal boxes or products A video can be provided upon request Price: €4,900 negotiable – needs to be sold quickly, I am open to offers. Please make a realistic offer. Reiner Diez AWS 6050 CS Case Sealer – Light Barrier Control, 2001, Industrial Quality Dujdpfxsytxk Hs Agfer If you have any questions or need further information, please feel free to contact us by message or phone. 10 machines available – attractive total price for buyers who take all units. Quick transaction preferred!

Condition: excellent (used), functionality: fully functional, working width: -700 mm, stack height: -50 mm, type of input current: AC, input voltage: 220 V, We are offering this very well-maintained Paul Schall DM-56-2 bookbinding machine, year of manufacture unknown. Title Paul Schall DM-56-2 Paper Drilling Machine – 2-Spindle Tabletop Unit Description Paul Schall DM-56-2 paper drilling machine for sale. • 2-spindle paper drilling machine • Tabletop unit • Voltage: 220 / 380 Volts • Power: 0.45 kW • Speed: 2800 rpm • Machine no.: 5670133 • Heavy-duty, classic industrial quality • Good condition, fully operational Ideal for printing shops, bookbinderies, or copy centers. Inspection possible. Price: 620 EUR negotiable. Used Paul Schall DM-56-2 paper drilling machine, 2 spindles, working condition. Duedpfx Aoytv Tregfer If you have any questions or require further information, feel free to send us a message or call us. 10 machines available – a very attractive bulk price is offered for purchasing all units. Prompt transaction preferred!

Condition: ready for operation (used), Year of construction: 1998, Kölle sliding table saw KS340 Dedpfxjrhghas Agfour Year of construction 1998 CE- KONFORM carriage length 3200 mm Cutting width 1050 mm tiltable up to 45° by means of handwheel Height adjustment of saw blade with handwheel Cutting height 90° 110 mm Cutting height 45° 77 mm Speed 3000/4400 rpm Scoring unit Digital display: - Rip fence - Angle fence - Cross table Parallelogram table can be tilted 45° on both sides, digital display Suction connection D 120/80 mm Space requirement approx. 3300 mm x 1900 mm x 1600 mm Weight 740 kg

Condition: ready for operation (used), functionality: fully functional, Panel saw, saw-milling machine TRIUMPH T3000 Specification: • Condition - used, serviced • Manufacturer - TRIUMPH • Model - T3000 • Sliding table length: 320 cm • Scoring saw with separate motor • Main saw motor - 4.0 kW • Milling spindle motor - 4.0 kW • Scoring saw motor - 0.7 kW • Milling spindle diameter: 35 mm • Main saw spindle diameter: 35 mm • Variable speed adjustment on the milling spindle (via belt) • Manual lifting and lowering of the saw blade • Extraction ports: 120 mm Dedpfx Agsw Snbxefsur • Weight approx. 900 kg • Transport dimensions: 330 x 120 x 110 cm (L x W x H) Additional information: • Good, original technical condition • Photos show the actual state of the item for sale • Possibility to power on and inspect the machine on site

Condition: excellent (used), Year of construction: 1998, functionality: fully functional, Automatic sharpening machine for gang saws with wet grinding. Grinding wheel diameter: 250 mm. Tooth pitch: 25 mm. Arc tooth profile. Fully automatic sharpening operation. Wet grinding unit with pump and tank. Includes several new spare parts. Ready for demonstration. Dusdpfx Aeyt I Hqsgfor

Condition: ready for operation (used), The U2PRW cutting and drilling machine is designed for processing slats and furniture fronts made of solid wood or MDF. The machine works in a semi-automatic cycle. During one cycle the machine performs: cutting at a given angle (in the range of 45 - 90 degrees) and drilling in the jammed plane, or the edge of the element. - Made in Poland TECHNICAL PARAMETERS: max. height of cut material 60 mm Dujdpfeq Ii Dlsx Agfer max. width of cut material at an angle of 45° 70 mm max. width of the material at an angle of 90° 150 mm max. length of cut material 2200 mm min. length of cut material at 45° 455 mm diameter of main saw 250 or 300 mm undercutter diameter 100 mm max. diameter of bottom milling cutter 35 mm max. depth of bottom milling 15 mm diameter of face drill embedment and bottom milling cutter 10 mm Drill head (face drilling): spindles 4 axial spacing of spindles 32 ; 32 ; 40 mm linear arrangement of spindles max. depth of face drilling 60 mm installed power 7 kW working pressure 0.6 Mpa overall dimensions (length / width / height) 4300 / 1600 / 1570 mm Machining units The machine is equipped with two machining units. The left unit, which is fixed, and the right unit - a sliding unit. Each machining unit consists of the following sub-assemblies - units: a main saw, an undercutting unit, a drilling unit that drills into the jammed plane, and a drilling unit that drills into the bottom of the workpiece. Bottom hole drilling unit The described aggregate is installed as an option. It is used in the processing of corner ties for doorframes with adjustable width. It makes a blind bore , for the can connector. The picture shows the mounted red cover which is at the same time the base for the machined angle strips and the cover with chip extractor. Workpiece pressure The machine tool is also equipped with a clamping system operating in two planes. The clamping area includes horizontal and vertical clamps. The horizontal clamps are responsible for pressing against the vertical bases and straightening the workpiece. Vertical ones, on the other hand, are responsible for immobilizing the workpiece during machining. The horizontal pressure always precedes the vertical pressure. Control The machine's control is clear, easy to use and functional. It allows switching on or off all aggregates separately, additionally with division into left and right sides. All aggregates have independent drive. The right-hand processing unit is set by pressing the control buttons on the control panel. The executive mechanism is a gearbox with an electric motor driving a trapezoidal screw. An electronic control system US with an operator panel and digital display is used to read and set the length of the workpiece. This system is also responsible for automatic corrections to the counter readings when the cutting angles change by 45° and 90°. In addition, it is responsible for automatic basing.

Condition: ready for operation (used), Kolbus DA36, age 1985 Equipped with: - automatic feeding covering material - automatic feeding hard spine insert and side boards - automatic soft spine insert feeding from roll - hot-melt glue Dedpfx Ageylbgbjfeur - speed max 36 Cycles/min - size max 560x405 mm - size min 155x110 mm

Condition: good (used), Metal band saw, fully automatic, band saw machine, band saw, vertical band saw, horizontal band saw, hydraulic horizontal band saw machine, automatic band saw, metal band saw machine -Manufacturer: Pehaka, horizontal band saw automatic band saw -Drive: 0.8 kW -Cutting data flat: 320 x 150 mm -Cutting data square: 150 mm -Saw blade speed: continuously adjustable, 20 - 195 m/min -Saw band: approx. 3700 mm -Coolant system -Dimensions: 1800/940/H1310 mm Dsdpfxjhwxb To Agfeur -Weight: 528 kg

Condition: ready for operation (used), Year of construction: 1984, BOOK SEWING MACHINE SMYTH + HEADOP MODEL 55 Djdpfx Ageyk Epqofjur -Automatic book sewing machine model 55, Year 1984 -Headop feeder, max size : 550X320 mm, min size : 150 x 80 mm. -Max mechanical speed: 125 signatures per minute -6+1 -Complete with manuals, external air pump, repairs and accessories -Available immediately

Condition: excellent (used), Year of construction: 1984, functionality: fully functional, machine/vehicle number: 137, total width: 2,800 mm, total length: 700 mm, total height: 1,700 mm, type of input current: three-phase, Bandsaw grinding machine Risstaler riv Rivo 200 GA Year of manufacture 1984 Various tooth shapes available Dujdpfowd N Dasx Agfer Operating instructions included Feed rate 30 or 60 teeth per minute

Condition: reconditioned (used), Year of construction: 2003, power: 5.5 kW (7.48 HP), cutting length (max.): 3,200 mm, cutting width at rip fence: 1,350 mm, Equipment: scorer, with scoring motor 0.73 kW, sliding table 3200 mm, mechanical parallel fence up to 1350 mm, power consumption 13.5A 400V 50Hz, max. saw blade diameter 400 mm, main motor 5.5 kW, extraction port 1x D=120 mm 1x D=80 mm, electric height adjustment, electric angle adjustment – as returned by customer Dodpfx Aswt A Ecsgfour

Condition: ready for operation (used), functionality: fully functional, The Horizon APC-61II is a high-precision programmable hydraulic guillotine, designed for professional print and finishing environments that demand reliability, productivity, and ease of use. Thanks to its hydraulic cutting and clamping system, this machine ensures consistent, high-quality cuts even for demanding jobs. Its intuitive touchscreen interface allows for straightforward operation, without the need for highly specialized personnel. The equipment features an advanced programming system capable of storing up to 99 jobs with 99 steps each (a total of 3,000 steps), optimizing repeatability and reducing setup times. The backgauge positioning, driven by a servomotor, ensures ±0.1 mm accuracy, guaranteeing precise results with every cut. 🔧 Key features - Hydraulic cutting and clamping system Dusdoywtyrepfx Agfor - Intuitive, easy-to-use touchscreen display - Job programming with memory (99 programs) - Automatic backgauge positioning via servomotor - Clamp pressure adjustment from 4.9 to 16.6 kN - Pre-clamping foot pedal for cut verification - Front adjustment of blade angle and depth - Safety system with dual push buttons and automatic return - Optional: safety beam guard 📐 Technical specifications - Cutting width: 610 mm - Cutting height: 100 mm - Insertion depth: 620 mm - Precision: ±0.1 mm - Cutting speed: 3.1 seconds - Eject length: 20 – 150 mm - Power supply: Three-phase 200 / 220 / 400 V – 50/60 Hz - Dimensions: approx. 1,078 x 1,480 x 1,440 mm 💡 Advantages - High precision and repeatability - Easy operation (ideal even for non-expert operators) - High productivity thanks to programmability - Robust and durable construction - Perfect for print shops, copy centers, and bookbinding 🎯 Applications - Cutting of paper, cardboard, and printed materials - Publishing production - Professional graphic finishing - Medium and long print runs

Condition: as good as new (ex-display), Year of construction: 2024, functionality: fully functional, power: 7.5 kW (10.20 HP), cutting height (max.): 200 mm, cutting width (max.): 1,450 mm, saw blade diameter: 550 mm, rotational speed (max.): 4,800 rpm, rotational speed (min.): 2,800 rpm, overall weight: 1,280 kg, cutting length (max.): 3,200 mm, cutting height with scoring (max.): 200 mm, cutting width at rip fence: 140 mm, table length: 3,200 mm, Equipment: motor brake, scorer, Heavy format circular saw with scoring unit and Siemens three-axis control Hanging control panel with Siemens control and 10" touch display Control of the saw blade height/inclination and positioning of the parallel stop via the control panel Max. cutting height 200mm Scoring device with separate drive motor Main saw blade with belt drive and speeds of 2800/3665/4800 min¯¹ High weight ensures vibration-free operation Large outrigger table with material roll Extendable aluminum longitudinal stop with three folding stops and digital position display 7.5 kW main motor mounted on a robust cast iron frame Four-bearing format sliding carriage with double roller carriage made of anodized aluminum with high torsional rigidity Multiple locking on the sliding table Standard with table extension and table extension made of sheet steel Large pendulum protection hood conveniently operated using a gas pressure spring can be swiveled up Saw blade clamped via tool-free Rapid system The panel saw is set up in our demonstration center in Chemnitz. Duedpfjvmfawsx Agfor It is new and in an unused condition. We are happy to help with transport, assembly and instruction.

Condition: new, Year of construction: 2026, The CORMAK BS 260G band saws, due to being equipped with a hydraulic cylinder, a cooling and an arm swivelling up to 60°, together with blades from renowned German Röntgen company, are used commonly in ironworking where precision, quality and cutting speed are important. Horizontal band saw with a swivelling arm for cutting metals, allows for cutting in plane perpendicular to the axis of material cut and at any angle from 0 to 60º. Material for cutting can be fed manually or by any mechanical feeding device, with automatic tool feed. Band guides are equipped with dedicated carbide plates and bearings. This has a huge impact on band guiding, its durability, cut straightness, cutting accuracy and quality. Machine's arm is made of profiled CAST IRON. Control panel is located by the arm. The drive from the electric motor directed to the cutting band driving wheel is transmitted by a motor with worm drive. The cutting band is tensioned on two cast iron wheels with a manual tightener and guided by adjustable rolling and linear set of carbide guides. A separate flood coolant container with an electropump is inside. The arm lowering speed (the cutting speed) is adjusted with a hydraulic cylinder. The feed speed is controlled by the control panel. There are 2 cutting band speeds to choose from: 36 and 72 m/min. In rest arm position (after the cutting process) the cutting band drive is switched off automatically. Safety is ensured with cutting band guards and microswitches stopping the motor after cutting cycle is finished or after any of the guards are opened; additional protection consists of automatic switch-off of the band saw in case the cutting band breaks. Technical data Cutting band saw dimensions 2455×27×0.9 mm Band tension mechanical (manual) Band speed 36, 72 m/min Feed speed Dodpfx Agsvuf S Nefsur 0–50 m/min (stepless feed) Arm lowering control stepless – hydraulic cylinder Vice base height 900 mm Power supply 3-phase 400V Motor power 1.1 kW Weight NETTO/ BRUTTO 220 kg / 284 KG Warranty 12 months Manual yes CE declaration yes Angle 0º ø230 260×150 225×225 45º ø165 180×130 165×165 60º ø105 100×90 110×110 *Please note that machine is sold without CEE connector by default, since there are many different types of it. If you would like to receive it with the machine, please write it to the seller before making a purchase/during order proceeding.

Condition: used, Year of construction: 1974, Technical details: total power requirement: 1,65 kW weight of the machine approx.: 620 kg Saw Blade Sharpening Machine Machine not complete - grinding spindle motor missing! Dsdpfewqplkjx Agfeur for sale as spare part dispenser! *

Condition: good (used), Year of construction: 1990, functionality: fully functional, saw blade diameter: 1,600 mm, Sharpening Machine for Metal HSS Saw Blades. Technical Specifications: - Saw blade diameter: approx. 20 mm to 500 mm (other sources state capacities from 20–400 mm). - Saw blade thickness: maximum 6 mm. - Working speed: steplessly adjustable from approx. 40 to 140 strokes per minute. - Grinding wheel diameter: max. 200 mm. - Tooth count: electronically pre-selectable from 20 to 999 teeth. - Weight: depending on configuration, between approx. 900 kg and up to 1.2 t. Dujdpfxeyfumze Agfjr Functions and Adjustment Options: The machine offers comprehensive machining options for different tooth geometries: - Supported tooth forms: Alternate top bevel tooth, high arc tooth, and flat arc tooth according to DIN 1840 (tooth forms A, B, BW, C). - Automation: Automatic infeed of the grinding wheel and an automatic dressing device. - Grinding modes: Supports relief grinding, oscillating grinding, and cylindrical grinding. Control: - Equipped with an LED display and error notification panel for monitoring the grinding process. Drive: - Separate motors for the indexing mechanism and the grinding wheel. Space requirements: - The dimensions for used models are specified at approx. 1200 mm width.

Condition: good (used), Year of construction: 2007, machine/vehicle number: 609086, Offer 26074 Hydraulically operated, double-column guided horizontal band saw automatic Technical Data: - Cutting range at 90° round: 260 mm - Cutting range flat: 260 x 260 mm - Automatic material feed max. single stroke: 600 mm - Max. cut length in multiple strokes: mm - Saw band dimensions approx.: 4100 x 32 x 1.2 mm - Cutting speed steplessly adjustable: 12 - 100 m/min - Cutting pressure steplessly adjustable: 0 - 10 m/min - Hydraulic material clamping with clamping pressure regulation - Coolant device - Chip conveyor - Total drive power: 400 V / 8.5 kW Duedjyn Ikrjpfx Agfer - Required floor space approx.: W 2350 x H max. 2340 x D 3050 mm - Weight approx.: 3000 kg