Used Book Sawing Machine for sale (65,574)

Year of construction: 2008, condition: ready for operation (used), A Peddinghaus saw and drilling combination system is available. 1) Saw unit Peddinghaus 1100 DG, max. product diameter: 510mm, max. product dimensions X/Y: 1100mm/500mm, cutting speed: 150m/min, saw blade dimensions X/Y/Z: 9300mm/54mm/1.6mm, max. product weight: 500kg, working height: 630mm, system dimensions X/Y/Z: approx. 2000mm/4500mm/2300mm, weight: approx. 5500kg. 2) Drilling unit Peddinghaus PCD 1100, drilling spindles: 3, tool holder: MK4, spindle power: 10kW, spindle speed: 900rpm, spindle stroke: 330mm, travel path Y/Z: 470mm/1100mm, rapid traverse: 5m/min, feed rate: 300mm/min, max. hole diameter: 40mm, product thickness range: 6.3mm–460mm, product width range: 76mm–1100mm, min. product length: 1575mm, max. product weight: 8165kg, clamping pressure vertical/horizontal: 800kg/2200kg, machine dimensions X/Y/Z: approx. 2400mm/1900mm/4500mm, weight: approx. 6000kg, control system: Siemens 840D i. Without roller conveyor for saw. Including cross conveyor. The saw shows a hydraulic leak, the chip brush motor is defective, and the spindle may require repair. Documentation available. On-site inspection possible. Lsdpjxp Rbzofx Afashc

Condition: new, Year of construction: 2026, Panel Saw Holzkraft / SCM minimax si 4 - 400 / 32 M A With tilting saw blade and sliding table made of anodized aluminium Item number: 5504933 Brand: Holzkraft TECHNICAL DATA Dimensions and Weights Weight (net): approx. 690 kg Dust Extraction Extraction port diameter: 120 mm Saw blade guard extraction port diameter: 80 mm Electrical Data Connection voltage: 400 V Mains frequency: 50 Hz Scoring motor power: 0.65 kW Output power (main motor): 7.0 kW Rated duty cycle (main drive): S6 Duty cycle (main drive): 40% Sliding Table and Worktable Sliding table length: 3200 mm Sliding table width: 360 mm Sliding table height: 175 mm Table length: 1000 mm Table width: 560 mm Table height: 900 mm Saw Unit Cutting width with rip fence: 900 mm Max. crosscut width left of blade: 3200 mm Edging length: 3200 mm Saw blade tilting range: 90 - 46° Max. cutting height at 90°: 136 mm Max. cutting height at 45°: 97 mm Note max. cutting height: independent of scorer Saw blade diameter: 400 mm Note saw blade diameter: independent of scorer Saw blade speed: 3500/5000 rpm Scoring Unit Scoring blade diameter: 120 mm Scoring blade speed: 9200 rpm EQUIPMENT Scoring unit with separate scoring motor Anodised aluminium sliding table Ljdpfoxw N N Hox Afaohc Handle for sliding table On/off switch on sliding table for main and scoring blade motors Edging frame Material roller on edging frame Rip fence with round bar guidance Stops: two professional folding stops Edging shoe Excenter clamp Table extension Table width extension Pendulum-type saw blade guard Motorised height adjustment and tilt of saw unit, digital tilt angle display Location: ex stock 54634 Bitburg - immediately available -

Condition: new, Year of construction: 2026, Panel Saw Holzkraft / SCM minimax si 4 - 400 / 32 With tilting saw blade and anodised aluminium sliding table Article number: 5504932 Brand: Holzkraft Heavy-duty worktable made of strongly ribbed cast iron – for maximum stability and durability Robust welded steel base – ensures high torsional rigidity and vibration-free operation Precision sliding table made of anodised aluminium – smooth running via high-quality ball contact system Carbide guide rails – for lasting precision and minimal maintenance Tilting cast iron saw unit with double segment guide – precise zero-point tilt for highest cutting accuracy Heavy-duty rip fence with round bar guide Equipped with adjustable eccentric clamp Integrated mitre cutting device on the sliding table – for quick and precise mitre cuts Scoring unit with powerful separate drive motor Equipped with high-quality crosscut fence – with heavy-duty telescopic stop, integrated roller for easy loading and unloading, inclined scale for comfortable reading and practical eccentric clamp for secure hold Saw blade speed adjustable in two stages Practical saw blade pendulum guard TECHNICAL DATA Dimensions and Weights Weight (net) approx. 670 kg Extraction Connection Extraction port diameter: 120 mm Extraction port diameter at saw blade guard: 80 mm Electrical Data Connection voltage: 400 V Mains frequency: 50 Hz Scoring motor power: 0.65 kW Rated output (motor power): 7.0 kW Duty type (main motor): S6 Duty cycle (main motor): 40% Sliding Table and Table Sliding table length: 3200 mm Sliding table width: 360 mm Sliding table height: 175 mm Table length: 1000 mm Table width: 560 mm Table height: 900 mm Saw Unit Cutting width with rip fence: 900 mm Max. crosscut width left of saw blade: 3200 mm Crosscutting length: 3200 mm Saw blade tilt: 90 - 46° Lsdpfxjxw N Sbs Afajhc Max. cutting height at 90°: 136 mm Max. cutting height at 45°: 97 mm Note on max. cutting height: Independent of the scorer Saw blade diameter: 400 mm Note on saw blade diameter: Independent of the scorer Saw blade speed: 3500/5000 rpm Scoring Unit Scoring blade diameter: 120 mm Scoring blade speed: 9200 rpm Features Scoring unit: with separate scoring motor Anodised aluminium sliding table Handle for sliding table Crosscutting fence Material roller on crosscutting fence Rip fence: with round bar guide Stops: Two professional folding stops Crosscutting shoe Eccentric clamp Table extension Table widening Saw blade pendulum guard Manual height adjustment and tilting of saw unit Location: ex stock 54634 Bitburg - immediately available -

Condition: excellent (used), Year of construction: 2021, For sale: Struers laboratory cut-off saw, model Discotom-100 FT 3x380-480V, year of manufacture 2021. The saw is in mint condition, with only about 13 hours of use. Included in the set is a coolant tank with complete control equipment. Greater versatility and efficiency in a single cut-off machine. Lodpfx Afsyfxfhjashc Device Description: Key Facts about the Discotom: • OptiFeed – intelligent feed control • AxioWash* – automatic cleaning • ExciCut – cutting of very hard materials • MultiCut – serial cutting (enables multiple sample preparation) • Method database • Cutting wheel database Discotom-10 and Discotom-100 are versatile benchtop cut-off machines designed to cost-effectively extend cutting capabilities and optimize sample preparation processes. Spacious, flexible, and user-friendly, the Discotom-10 and Discotom-100 models provide exceptional cutting versatility and a wide range of clamping and cutting options for various specimen types. They enable efficient operation with minimal operator effort and minimal material deformation. Fast and Precise: State-of-the-art cutting technologies, such as intelligent speed regulation, ensure rapid and precise cuts. Simply select the material hardness, and the machine will automatically adjust the appropriate speed. Exceptional Versatility: When the wheel becomes clogged with material, the user can choose the automatic Direct Cutting mode with a constant feed rate or the Impact Cutting mode. The manual ExciCut mode is intended for cutting harder and larger samples. The optional automatic X-table enables MultiCut, allowing you to cut samples of identical or varying thickness and precise positioning cuts. Time Savings: A multifunctional knob enables quick and easy cutting parameter settings. Automatic speed adjustment saves time and allows the same wheel to be used for different materials, eliminating time-consuming wheel changes. Rapid switching between manual and automatic modes is provided by a motorized cutting arm lock, while the color icon display offers a complete overview of all key information.

Year of construction: 2025, condition: new, XZ100228 Single head sawing machine Ø 400 mm for aluminium and PVC with manual blade down-feed and pneumatic vices FOM INDUSTIRE SIKA PLUS M Machine in stock Configuration: - Aluminium and PVC cutting machine with CE certification - Tungsten carbide saw blade Ø 400 mm - Manual blade lowering (with lever) with pneumatic servo control to reduce operator stress - Side support plates on both sides - Blade motor power 2.2 kW - 2850 rpm - Self-braking motor with blade stop in less than 10 sec - Cutting angle from 45°Lh to 45°Rh on vertical axis and 45°Rh to 90° on horizontal axis - Intermediate angles with mechanical stop - Cylinder blocking involuntary head lowering - Double working pressure servo-controlled in low pressure - 1 pneumatic vertical vice - 2 pneumatic horizontal vices - 1 safety servo-valve for each pneumatic horizontal vice - Conical anti-crushing buffers Lsdpfspl Tgmjx Afajhc - Worktable and turntable structure in stabilized cast iron - Motor transmission by belt - Saw blade holding spindle Ø 32 mm - Spray mist blade lubrication system - Integral blade guard in rest position - Set up for the extraction of chips and fumes

Condition: as good as new (ex-display), Year of construction: 2024, Carriage length: 3200 mm Cutting width at the width stop: 1350 mm Cutting width at the crosscut fence: 3200 mm Cutting depth: 200 mm Scorer: yes Height adjustment saw blade: motorized Pivot adjustment saw blade: motorized Width stop adjustment: manual Display saw blade angle: digital Lsdpfx Afekuzd Hjaohc Display cutting height: digital Display width stop: scale Display cutting ruler: scale Saw blade diameter: 550mm Speeds: 3000 / 4000 / 5000 rpm Engine power: 7,5 kW Motor brake: yes / automatic Suction connection: 100mm and 120mm machine length: 3600mm Machine width: 2000mm Weight: 1000kg

Condition: ready for operation (used), total height: 3,020 mm, total length: 3,300 mm, total width: 5,100 mm, throat depth: 1,060 mm, zware dubbelkoloms lintzaag voor het zagen van hooggelegeerde staalsoorten automatische invoer van het werkstuk met automatische herpositionering Lhsdpfxjv Sfp As Afaec CNC-gestuurde variabele snelheid voor invoer en zagen spaantransportband uitgerust met volledig gemotoriseerde Weisshaupt-rollenbanen: - 10,3 meter invoerrollenbaan (buiten) met 2 hydraulische klemmen voor de contouren van het werkstuk - 9 meter invoerrollenbaan (binnen) met 2 hydraulische klemmen voor de uitlijnen van het werkstuk - Maximale werkstukbreedte: 900 mm - elke rol is gemotoriseerd - de capaciteit van één rollenbaan is 4 ton - 4 meter uitvoerrollenbaan: één rollenbaan is uitgerust met een weegschaal om het werkstuk na het snijden te wegen (Sartorius-systeem) Max height of workpiece: 860 mm Sawspeed: 16 > 80 m/min Length of band saw: 10260 x 80 x 1,60 mm Power needed: 32 kW (100 amp) Weight: 9 ton (only machine)

Condition: good (used), Year of construction: 1980, functionality: fully functional, Type VMS III - PV Machine No. 8518 Year of construction 1980 Lsdpfx Afjyhq S Soajhc Technical data : 2-stage saw motor 2.0 / 2.6 kW Saw blade 350 mm 4 cutting speeds 8.5 / 17 / 34 / 68 rpm Clamping range, flat / round 200 / 120 mm Feed length, single stroke 5 - 600 mm Feed length, double stroke 1200 mm

Condition: good (used), Tranklein BRM 500 Book block rounding machine The machine is in very good condition, fully serviced and ready to use. Lhsdex N I Inopfx Afaec Model with electric book thickness adjustment. Technical specifications: Maximum working size: 500mm Maximum book thickness: 120mm Speed: 300 cycles/h Power supply: 400V Weight: 300kg Easy to use, quick to set up.

Condition: good (used), Karl Krause Large Bookbinding Press with Tapping Block The machine is fully operational and ready for operation. Manufactured by Karl Krause, Germany. The press has a tapping block that increases the pressing force. Pressure: 5 tons Plate dimensions: 550 x 490 mm Lhodpfxex N I Hwj Afaec

Condition: new, Year of construction: 2026, The BS370H is a powerful and reliable semi-automatic band saw with miter cuts from -45° to +60° and a hydraulically controlled vice and saw arm. The machine is irreplaceable in every locksmith's workshop and is ideal for cutting pipes, profiles and solid materials. The belt guides are equipped with special carbide plates and bearings. This has a huge impact on belt guidance, belt life, straightness, accuracy and cut quality. The carbide guide greatly reduces machine and saw blade wear. The machine is equipped with an efficient cooling pump with a closed coolant circuit. The drive of the machine is transmitted via a worm gear. The machine has a three-phase motor with two cutting speeds and motor thermal protection. The cutter is equipped with a strain gauge - a tape tension sensor and an automatic switch-off in the event of the cutting tape breaking. The shape of the upper part of the base is a tub for draining the coolant and catching chips formed during the cutting of the material. A cast iron work table with a swivel arm and a control panel on a separate arm is attached to the base. In the cutting process, the main cutting movement is the moving of the cutting band and the arm's lowering feed. The speed of the arm's descent (cutting speed) is regulated by a hydraulic cylinder. Cutter for precise, professional work. Torsion-resistant, rigid ductile iron arm and saw body. Double sided quick lock vice In semi-automatic mode, after pressing START, the hydraulic vise will clamp the material, the hydraulics will lower the saw arm, the limit switch will give the signal to finish cutting and the hydraulics will raise the saw arm. Technical parameters Size of the cutting band 3160 x 27 x 0.9 mm Belt tension mechanical (manual) Belt speeds 34.68 m / min Arm Drop Adjustment stepless - hydraulic cylinder Height of vice base 890 mm Diameter of saw wheel 380 mm Lhodpfx Aeycqhcofasc Power 3phase, 400V Main engine power S1- 1,5/S6 -1,9kW Cooling pump motor power 46W Dimensions with base 1850x950x1500 (2050) mm Weight 491 kg

Year of construction: 2016, condition: used, functionality: fully functional, - Carrier size: 1000 mm - Infeed roller conveyor: 16 m - Outfeed roller conveyor: 14 m - Extension option available Lodpfx Ajyh Apajfaehc

Condition: ready for operation (used), Year of construction: 1993, 5 clamps side glue premelter Ledpfxsyaguto Afajhc dust extractor bag cover feeder

Condition: new, Year of construction: 2026, CORMAK BS320H is a robust, industrial semi-automatic metal band saw designed for efficient cutting of steel and large cross-section workpieces. It is a professional semi-automatic band saw that performs perfectly in manufacturing plants, metalworking shops, tool rooms, and maintenance departments—anywhere repeatability and high productivity matter. The BS320H model operates as a universal metal band saw as well as an efficient band saw for pipes and profiles. It easily handles cutting bars, profiles, sections, channels, angles, and pipes, delivering a clean cutting line and smooth operation. It belongs to a class of machines chosen by customers as reliable and durable metal band saws for everyday use. Key advantages of the CORMAK BS320H Semi-automatic cutting cycle – operator comfort, reduced workload, and high repeatability in series production. Wide cutting capacity – cutting of workpieces up to 320 × 195 mm, ensuring efficient workshop and production use. Rigid, stable construction – reduced vibration, improved cutting accuracy, and extended blade life. Ideal for cutting pipes and profiles – precise cuts with minimal burrs and no material overheating. Designed for intensive operation – reliable performance in manufacturing companies and steel cutting services. Applications Lhjdpeychwnsfx Afaec The CORMAK BS320H metal band saw is recommended for: manufacturing plants and structural fabrication companies (profiles, sections, steel components), metalworking shops and tool rooms, maintenance departments, steel cutting services (repeatable series), cutting pipes and profiles as a dedicated band saw for pipes and profiles. Why choose this band saw? If you are looking for a reliable machine for daily operation, the CORMAK BS320H is a proven semi-automatic metal band saw that increases productivity, improves repeatability, and allows faster job completion. It is one of those machines that genuinely reduces labor costs thanks to predictable, stable operation. Technical specifications Type: Semi-automatic band saw Arm lifting/lowering: Hydraulic, infinitely variable Blade speed: 37.5 / 75 m/min Miter cutting range: from −45° to +60° Vise: Hydraulic Minimum cutting diameter: Ø 5 mm Minimum clamping length: 30 mm Vise base height: 950 mm Blade size: 27 × 0.9 × 2680 mm Total power: 1.5 kW Dimensions (L × W × H): 2000 × 860 × 1500 mm Weight: 250 kg

Condition: new, The TITAN 43/20 CD+E firewood processor with joystick control cuts logs with a maximum diameter of ø 43 cm using a harvester bar and splits them with a splitting force of 20 tons. This is a combination machine (electric and PTO connection). Demonstration and inspection by appointment possible – the machine is currently in stock and available immediately. Warehouse clearance – special price – interim sale reserved. Lhodpfx Ajtrmg Hsfaoc

Condition: good (used), Karl Krause Hot Stamping press Manufactured by Karl Krause, Germany, Lodsx N Dxvopfx Afaehc The machine is fully operational, after modernization of the control system. The work table is moveable. The device was purchased from a school workshop and has not been used in production. Power supply: 230V Heating plate size: 400x275mm. Weight: approx. 600kg.

Condition: like new (used), Year of construction: 2023, For sale is a demonstration unit Hammer K3 Winner Comfort panel saw with a cutting length of 2000 mm. The machine is in mint condition. Lhjdpovxrurjfx Afaoc Technical data: - Sliding table: 2000 mm - Outrigger table: 1100 mm - Mitre fence: 1300 mm - Angle indexer - Saw blade tiltable 90-45° - Max. cutting height: 104 mm with blade diameter 315 mm - Cutting width: 800 mm - 5.5 HP (4 kW) motor, 400 Volt - Year of manufacture: 2023 The panel saw is located in A-5431 Kuchl and can be inspected at any time during our opening hours. Subject to prior sale! Related terms: saw, circular saw, Hammer, panel saw, sliding table saw Reference: R-A0117

Condition: used, Year of construction: 2015, Perfecta Bookline Plus Perfect Binding Machine Number of Clamps: 5 clamps Glazing unit Mechanical Speed: Up to 2,000 cycles/hour (or approximately 1,800 books/hour depending on configuration) Max Book Size (WxH): 430 x 320 mm (approx. 16.9 x 12.6 inches) Min Book Size (WxH): 110 x 105 mm (approx. 4.3 x 4.1 inches) Book Thickness (Spine): 6 – 80 mm Ljdpfsxz A Tmox Afajhc Control Interface: Color touchscreen monitor with Navigator SE UI for motorized/automatic settings Feeding: Hand feeding station with jogger; automatic cover feeder (top-loading) with scoring Spine Preparation: Milling and roughening station with dust extraction system Counter: 5 mios

Year of construction: 1987, condition: not inspected (used), Sharpening machine for metal and segmental circular saws. Circular saw blade diameter from 80 - 710 mm. Ledpfx Afslmkpfjajhc Any tooth pitch. Tooth height 1.2 - 14 mm. Working speed infinitely variable 15 - 180 teeth / min. Wet grinding device, NC controlled,

Condition: excellent (used), Year of construction: 1994, VOLLMER CHP 025 with Hollow face teeth and cheap breaker teeth device Lhjdpjx Rrilefx Afajc

Condition: excellent (used), Year of construction: 2024, operating hours: 193 h, functionality: fully functional, travel distance X-axis: 7,200 mm, travel distance Y-axis: 480 mm, travel distance Z-axis: 340 mm, cutting width (max.): 335 mm, workpiece length (max.): 6,000 mm, milling spindle speed (max.): 6,000 rpm, section length (max.): 6,000 mm, TECHNICAL DETAILS - Profile Milling Machine Processing length: 7,200 mm Number of axes: 4 Control: eluCAM graphical, Windows XP user interface Workstations: 2 independently operating stations Turret tool changer: 8 tools, servo motor driven Tool holder: BT 30 Disc mill diameter: 180 mm Tool length: 150 mm (from point of attachment) Travel distances Travel X-axis: 7,200 mm (without end-face processing), 7,080 mm (with end-face processing) Travel Y-axis: 480 mm Lhjdpfxewprmzo Afaoc Travel Z-axis: 340 mm Rapid traverse X-axis: 60 m/min Rapid traverse Y-/Z-axis: 30 m/min Positioning accuracy: ±0.1 mm/m Spindle Milling spindle speed: 1 to 6,000 rpm Milling spindle power: 6.0 kW Supply Air connection: min. 7 bar Air consumption: 100 l/min Electric connection: 400 V, 3~, 50 Hz, 35 A EQUIPMENT two independent workstations with light barrier and camera system Non-swiveling inclined milling head for 2 tools, Er20A, up to 18,000 rpm Inclined milling head swiveling 4 × 90°, Er20, up to 22,000 rpm Inclined milling head non-swiveling for steel, Er20A, 1,554 rpm Fixed saw head i=1:1, for D=300 mm saw blade, suitable for 90° cross cuts Carbide saw blade Z=100, D=300 mm, cutting width 3.2 mm Tool holder i=1:3.86 for 18,000 min⁻¹, ER25 Cooling/lubricating unit for steel processing Disc milling holder BT30, D=16 mm Disc cutter D=92 × 6 mm, Z=14, D=16 mm, carbide teeth TECHNICAL DETAILS - Double Mitre Saw Max. cutting length: 6,000 mm Min. cutting length at 90°: 335 mm Min. cutting length at 45°: 335 mm Saw blade diameter: 420 mm Cutting angle (rotation): pneumatically adjustable 90° and 45° inside, intermediate angles and 22.5° acute manually adjustable with digital display Cutting angle (tilt): pneumatically adjustable 90° and 45° inside Saw direction: saw blades move from bottom to top Control Control type: E580/1 Length adjustment: automatic with positioning control Saw blade tilt: pneumatically automatic between 90° and 45° Positioning accuracy: ±0.1 mm/m Positioning: pneumatic locking Operating system: Windows Saw unit Speed: 2,800 rpm Power per motor: 4,000 W (5.5 HP) Saw blade cooling: available Air consumption per cycle without cooling: 40 l Air consumption per cycle with cooling: 64 l Supply Electric connection: 230/400 V, 3-phase, 50 Hz Air connection: 7 bar Dimensions and Weight Length: 7,550 mm Width: 1,600 mm Height: 1,450 mm Weight: 1,750 kg EQUIPMENT Automatically closing protective covers Electronic positioning of the heads with +/- 0.1 mm/m accuracy Digital angle display for manually adjustable special angles Pneumatically adjustable saw blade rotational and tilt angles Operation via Windows control with 8.4" display and handwheel Cooling system for saw blades included Saw unit with bottom feed for optimal cutting force

Condition: good (used), Year of construction: 2002, Perfect Binder Eurotecnica 425 Lhodpoyhcr Rsfx Afasc Year of manufacture: 2002 Item No. L832

Condition: new, HORIZONTAL BAND SAWING MACHINE A 1200 BIG 150 Successor of A-1200 PLUS In addition to the functionality of its predecessor, the A 1200 BIG 150 is significantly larger, which results in increased performance. It is used for longitudinal cutting of wood in the form of beams, square timbers and planks. Thanks to its design, it can be operated by one person, which is now a valuable advantage of every industrial machine. Fittings: Length of the log cut: individually to the needs of the recipient Diameter of the processed log: 1500 mm Guide wheel of the bandsaw: 600 mm Band saw: length: 61500 mm Width: 40-50 mm Main engine: 15 kW Electric lifting up / down Smooth feedrate control Ljdpfju Sg A Uox Afashc Hydraulic tension of the saw Average efficiency: 1-1.5m3 / hour (Depending on the size of the log) In addition, the A 1200 BIG 150 can be equipped with: increasing power to 18.5kW or 22kW electrically moving roller bark cutter SELBIT ISP-10 microprocessor cutting thickness controller operator seat stationary desktop plank discharge bed extension Hydraulics: Hydraulically raised retaining arms loading of the log leveling holdfast chain rotator leveling with hydraulic drive hydraulic aggregate 5.5kW

Condition: good (used), Year of construction: 2012, machine/vehicle number: 2445131603, Offer 26052 Technical Data: - Saw blade diameter: 550 mm - Maximum cutting length: 6000 mm - Minimum cutting length at 90° + 45°: 335 mm - Cutting range: see attached diagram - Swivel range inward, pneumatic: 90° - 45° - Swivel range inward, manual: 22.5° - Swivel range outward: 140° - Tilt range inward, pneumatic: 90° - 45° - Saw blade speed: 2800 rpm - Drive: 400 V / 2 x 4000 Watts - Space requirements: approx. W 8000 x H 1600 x D 1400 mm - Weight: approx. 2500 kg - Equipped with: - PC control E 555/1 for adjustment of cutting lengths - Motorized swiveling and tilting of both units - Automatic spray lubrication device - Traversing roller conveyor Lsdpfx Afeygv Ddsashc

Condition: excellent (used), Format Circular Saw FKS 550-3200 M A PRO - Year of manufacture: 2023 - Max. cutting height: 200 mm - Cutting height: 200/140 mm - Crosscut width left of the saw blade: max. 3200 mm - Cutting width with parallel fence: 1450 mm - Saw blade tilting: 90 – 45° - Dimensions (LxWxH in mm): 3,386 x 3,703 x 1,330 - Main saw blade with belt drive and speeds: 2800/3665/4800 rpm - Vibration-free operation due to high dead weight (1,070 kg) - Large support table with material roller - Parallel fence with round bar guide Ljdpfxsxfku To Afajhc - Extendable aluminium rip fence with digital display (2 folding stops) - Quadruple ball-bearing format sliding table with twin roller carriage made of anodised aluminium, high torsional stiffness - Large pendulum safety guard with gas pressure spring - Multiple locking positions on sliding table - Motorised saw blade tilt & height adjustment with digital display - 8.8 kW main motor - Tool-free rapid system for saw blade clamping - Saw unit can be switched on and off - On/off switch on the sliding carriage - Edging length: 3200 mm