Used Carcass Clamp for sale (9,297)

Condition: excellent (used), Year of construction: 2021, operating hours: 3,300 h, functionality: fully functional, machine/vehicle number: ADKL2001, clamping force: 14,000 kN, screw diameter: 120 mm, clearance between the columns: 1,450 mm, column diameter: 240 mm, displacement volume: 7,351 cm³, injection pressure: 1,200 bar, injection weight: 6,983 g, mold height (min.): 650 mm, ejector force: 3,50,000 N, ejector stroke: 380 mm, opening stroke: 1,450 mm, plate length: 2,950 mm, plate width: 2,000 mm, plate height: 2,000 mm, total length: 14,100 mm, total width: 3,400 mm, total height: 3,600 mm, overall weight: 75,000 kg, heating capacity: 60 kW (81.58 HP), pressure: 178 bar, number of injections: 1, pump power: 2,04,000 W, power: 266 kW (361.66 HP), type of input current: three-phase, input frequency: 50 Hz, input voltage: 400 V, input current: 520 A, Equipment: documentation/manual, The machine has seen limited use and is in very good condition. It has been well maintained. The machine only processes ABS and PP. It features a Beckhoff control system. The machine is equipped with extensive additional equipment, including 3 pneumatic valves, two hydraulic valves, a servo valve for table movement hydraulics, 32 tool heating zones, a water manifold with 8 zones, a screw heating element insulation, a hydraulic screw rotation system for torpedo replacement, a torpedo with a locking system, an interchangeable centering ring, a Euro-map for the robot, a door with automatic opening via an electric motor, and an electrical cabinet with sockets. Additionally, water blocks are installed on both the moving and stationary tables, each with 8 connections. Furthermore, a set of spare parts is included, such as a complete torpedo, a screw nozzle, heaters, temperature probes, and specific hydraulic seals, as well as a self-filtration filter and a torpedo wrench, and auxiliary ejector rods. A Wemo robot can also be sold with the machine; while it is not the subject of this advertisement, it can be purchased separately and added to the machine. It was used with the machine and is adapted for it. Hsdpozna T Refx Aftsfl

Condition: excellent (used), Year of construction: 2010, Krauss Maffei KM 130-750 CX Year of manufacture: 2010 Injection Unit: Screw diameter: 40 mm Shot weight: 228 g Injection pressure: 2500 bar Dosage volume: 251 cc Clamping Unit: Clamping force: 130 t Tie bar distance: 470x470 mm Platen size: 745x770 mm Ejector: hydraulic Clamping unit: hydraulic Control system: MC5 Additional equipment: Euromap 67 Robot interface Hydraulic core pull x 1 Pneumatic core pull x 6 Control system with 18 hot runner zones Injection unit hardened – bimetal Proportional valve on injection unit – accurate injection Hfjdpfx Aozy Inmjftel Dimensions: Weight: 9000 kg Length/Width/Height: 4.90x1.60x2.10 m All machines offered are started up by our service technicians prior to sale. It is possible to receive a video of the technical tests of the selected machine or to participate in live technical tests at our facility in Łódź. Price: On request

Condition: used, Year of construction: 2024, MACHINE PROFILE: 3,800 kN (420 US tons) IMM ===== Machine ID: Hfjdpfezzv Tgex Aftsl • Injection Unit: 265 • Clamping Unit: 380 • Weight: 21,300 kg Clamping Unit Specifications: • Force: 3800 kN (388 tons / 420 US tons) • Tie-bar Spacing: 830x830 mm • Platen Size: 1190x1190 mm • Stroke (Open/Eject): 700 / 210 mm • Ejector Force: 90 kN • Mold Height (Min/Max): 300 / 750 mm (+800 option) • Max Mold Weight: 3.8 tons • Dry Cycle: 2.3s / 500mm Injection Unit Specifications (By Screw: 25 / 30 / 35 mm): • L/D Ratio: 24 / 24 / 20 • Capacity: 74 / 106 / 144 cm³ • Rate: 98 / 141 / 192 cm³/s • Recovery Rate: 10 / 15 / 22 g/s • Pressure: 2700 / 2700 / 2000 bar • Stroke / Speed: 150 mm / 420 rpm • Nozzle (Stroke/Force): 305 mm / 40 kN • Heating Capacity: 9.2 kW

Condition: used, Mayrhofer tensioning device Hfodpozx Efmsfx Aftel with auxiliary trolley Track gauge: 90 cm Location: Germany, near Lake Chiemsee

Condition: good (used), Year of construction: 2016, operating hours: 14,000 h, functionality: fully functional, machine/vehicle number: 19979, travel distance X-axis: 900 mm, travel distance Y-axis: 780 mm, travel distance Z-axis: 650 mm, rapid traverse X-axis: 40 m/min, rapid traverse Y-axis: 40 m/min, rapid traverse Z-axis: 40 m/min, feed length X-axis: 40 mm, feed length Y-axis: 40 mm, feed length Z-axis: 40 mm, nominal power (apparent): 75 kVA, torque: 191 Nm, controller manufacturer: Fanuc, controller model: G-Tech 31 iB, workpiece length (max.): 850 mm, workpiece width (max.): 850 mm, workpiece height (max.): 450 mm, workpiece diameter (max.): 850 mm, workpiece weight (max.): 500 kg, spindle speed (min.): 40 rpm, spindle speed (max.): 12,000 rpm, coolant supply: 90 bar, number of spindles: 1, number of slots in tool magazine: 60, mount diameter: 40 mm, tool length: 350 mm, tool diameter: 80 mm, tool weight: 10,000 g, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, MX-850 Milling Machine – Year of Manufacture 2016 – Excellent Condition For sale is a reliable and high-performance MX-850 milling machine from 2016. The machine is in good, well-maintained condition and is fully operational. With approximately 14,000 operating hours, the machine has been regularly serviced and professionally used throughout. Particular mention should be made of the spindle, which runs exceptionally smoothly and is almost like new—ensuring precision and high machining quality. The MX-850 stands out for its robust construction, high accuracy, and versatile applications in daily production. It is ideal for a wide range of milling operations and perfectly suited for both single and series production. Equipment & Details: - Model: MX-850 - Year of manufacture: 2016 - Operating hours: approx. 14,000 h - Condition: good - Spindle: excellent run, nearly as new - Function: perfectly operational, ready for immediate use - Coolant system (Knoll) included - Chip conveyor included - Transformer included Scope of delivery note: The machine is sold without tools, holders, or LANG clamping system – only the machine itself and the above-mentioned peripherals are included. The machine has always been handled with care and regularly maintained. It is currently still in operation and can be inspected by appointment. Hfjdpfjy Dd Exex Aftsl If you are interested or have further questions, please feel free to contact us.

Condition: excellent (used), Year of construction: 2006, ARBURG 370 S — 600-290 | Screw ø 35 mm 📐 CLAMPING UNIT Clamping force: 600 kN Closing force: 38 kN Opening force / increased: 24 / 160 kN Opening stroke: 400 mm Mould height min.: 200 mm Daylight max.: 600 mm Distance between tie bars: 370 × 370 mm Platen size: 510 × 510 mm Weight of mov. mould half: 360 kg Ejector force: 125 kN Ejector stroke: 125 mm ⚙️ HYDRAULICS Drive power: 15 kW Total connected load: 23,9 kW 💉 INJECTION UNIT — ø 35 mm Screw stroke max.: 150 mm Effective screw length L/D: 20 Injection volume max.: 132 cm³ Shot weight max.: 20,5 g PS Material throughput max.: 10,5 kg/h PS Injection pressure max.: 2000 bar Injection flow max.: 140 cm³/s Injection flow with accumulator: 430 cm³/s Back pressure max.: 350 / 200 bar Screw speed max.: 54 m/min Screw torque max.: 380 Nm Nozzle contact force: 60 kN Nozzle retraction stroke: 240 mm Heating zones / power: 4 zóny / 5,8 kW Nozzle heating: 0,6 kW Hodpfx Afszrwz Tjtsfl Hopper capacity: 50 l 📦 DIMENSIONS & WEIGHT Oil capacity: 135 l Net weight: 3300 kg Electrical connection: 80 A

Condition: used, Technical details: weight: 400 kg number of strokes: - Hub / Min Hsdozxxftspfx Aftofl Torque: - kp dimensions L x W x H: 1,24 x 0,84 x 1,0 m

Condition: excellent (used), Year of construction: 2023, operating hours: 4,050 h, functionality: fully functional, machine/vehicle number: AEFM6009, clamping force: 10,000 kN, screw diameter: 110 mm, clearance between the columns: 1,100 mm, column diameter: 180 mm, displacement volume: 4,941 cm³, injection pressure: 1,840 bar, injection weight: 4,546 g, mold height (min.): 450 mm, ejector force: 2,89,000 N, ejector stroke: 350 mm, opening stroke: 1,200 mm, plate length: 2,350 mm, plate width: 1,570 mm, plate height: 1,570 mm, total length: 11,300 mm, total width: 2,550 mm, total height: 3,400 mm, overall weight: 44,000 kg, heating capacity: 51 kW (69.34 HP), pressure: 178 bar, number of injections: 1, pump power: 1,36,000 W, power: 195 kW (265.13 HP), type of input current: three-phase, input frequency: 50 Hz, input voltage: 400 V, input current: 371 A, Equipment: documentation/manual, The machine has relatively few operating hours and is in very good condition. It has been well-maintained. The machine processes only ABS, PP, and PS. It is controlled by a Beckhoff system. The machine is equipped with extensive additional features, including 3 air valves, two hydraulic valves, a servo valve for hydraulic table movement, 24 tool heating zones, a water manifold with 6 zones, a screw heater insulation, hydraulic screw rotation for die replacement, a die with a locking system, an interchangeable centering ring, a euro-map for the robot, a door with automatic opening via an electric motor, and an electrical cabinet with sockets. In addition, water blocks are fitted to both the moving and stationary tables, each with 8 outlets. Furthermore, a number of spare parts are included with the machine, such as a complete die, a screw die, heaters, temperature sensors, and various seals for the hydraulics, as well as a self-filtration filter, a die wrench, and auxiliary ejector rods. The machine is being sold without the robot shown in the pictures. Hsdpfx Ajznll Ssftjfl

Condition: excellent (used), Year of construction: 2021, operating hours: 6,300 h, functionality: fully functional, machine/vehicle number: ADFL9004, clamping force: 80,000 kN, screw diameter: 98 mm, clearance between the columns: 1,020 mm, column diameter: 160 mm, displacement volume: 3,142 cm³, injection pressure: 1,794 bar, injection weight: 2,890 g, mold height (min.): 400 mm, ejector force: 1,82,000 N, ejector stroke: 280 mm, opening stroke: 1,000 mm, plate length: 2,020 mm, plate width: 1,440 mm, plate height: 1,440 mm, total length: 11,200 mm, total width: 2,400 mm, total height: 3,300 mm, overall weight: 35,000 kg, heating capacity: 39 kW (53.03 HP), pressure: 178 bar, number of injections: 1, pump power: 1,16,000 W, power: 163 kW (221.62 HP), type of input current: three-phase, input frequency: 50 Hz, input voltage: 400 V, input current: 312 A, Equipment: documentation/manual, The machine has few operating hours and is in very good condition. It has been well maintained. The machine processes only ABS, PP, and PS. The machine is controlled by a Beckhoff system. The machine is equipped with a variety of additional features, including 3 air valves, two hydraulic valves, a servo valve for hydraulic table movement, 8 tool heating zones, a water manifold with 8 zones, a screw heater insulation, hydraulic screw rotation for torpedo replacement, a torpedo with a locking system, an interchangeable centering ring, a Euro-map for the robot, a door with automatic opening via an electric motor, and an electrical cabinet with sockets. Water blocks are also included for both the moving and stationary tables, each with 8 connections. In addition, a number of spare parts are included, such as a complete torpedo, a screw, heaters, temperature sensors, and specific seals for the hydraulics, as well as a self-filtration filter, a torpedo wrench, and auxiliary ejector rods. The machine is sold without the robot shown in the pictures. Hsdpfx Afeznlhmotjfl

Condition: used, functionality: fully functional, Year of construction: 2008, load capacity: 1,600 kg, Bale clamp ISO class: ISO class 2 = 1,000 – 2,500 kg Condition: Ready for operation and fully functional Technical condition: Good Description: Year 2008 ISO 2A (41 cm) Capacity 1,600 kg / 500 mm Sideshift Width 1,070 mm Clamps 1,200 mm ID OS1935 Hfsdpfsyzdfmjx Aftol

Condition: ready for operation (used), Year of construction: 2009, operating hours: 5,280 h, functionality: fully functional, We offer a table-type shot blasting machine – STEM 14x6/2S/2WX1M with a table diameter of 1400 mm. The machine is in very good condition and ready for immediate use. The shot blasting machine has two rotary tables and two turbines, each with a power consumption of 5.5 kW. The designed shot blasting unit is manufactured for semi-automatic shot blasting of the outer surface of parts placed on a rotary table. The machine is equipped with two rotary tables. Rotary table diameter: 1400 mm Maximum product height: 600 mm Type: 14x6/2S/2WX1M Year of manufacture: 2009 Hfjdpfx Ajzwqyyjftjl Number of operating hours: 5275 Commissioning date: March 31, 2009 Machine weight: 5000 kg Machine length: 3540 mm Machine height: 5540 mm Machine width: 6600 mm Total power consumption: 20 kW Operating range Blast wheel, number and type: 2 WX1M Outer diameter of the blast wheel: 330 mm Blast wheel speed: 2900 rpm Amount of abrasive material discharged per turbine: 80-90 kg/min Amount of abrasive material for initial filling: 500 kg Rotary table diameter: 1400 mm Rotary table speed: 2 rpm Spindle diameter in the front bearing: 105 mm Maximum torque on the spindle: 2500 Nm Distance of the spindle axis from the clamping surface of the table: 60-560 mm Maximum workpiece weight: 1500 kg

Condition: excellent (used), Year of construction: 2019, Wittmann Battenfeld EcoPower 110/350 / All-Electric Machine / Operating hours: approx. 15,000 in automatic mode Year of manufacture: 2019 Injection Unit: Screw diameter: 35 mm Shot weight: 153.8 g Injection pressure: 2083 bar Dosage volume: 168 cc Clamping Unit: Clamping force: 110 t Tie bar spacing: 470 x 420 mm Platen size: 682 x 682 mm Ejector: electric Clamping unit: toggle lever Control system: UNILOG B8 - Touchscreen Additional features: Machine in excellent technical condition All-electric machine: energy-efficient and very quiet Operating hours: approx. 15,000 in automatic mode Total operating hours: 21,800 Euromap 67 Robot interface Air valve x 1 Hydraulic core pull x 1 Hot runner control system Injection unit is wear-resistant and corrosion-resistant Central lubrication Dimensions: Weight: 4,800 kg Length/Width/Height: 4.91 x 1.42 x 2.10 m All machines offered are started up by our service technicians prior to sale. It is possible to receive a video of the technical tests of the selected machine or to participate in live technical tests at our facility in Łódź. Price: On request Hodpfx Afozy Ilrstofl

Condition: excellent (used), Year of construction: 2017, Engel Victory 330H/200V/140 combi Ecodrive / Production line with the Sepro Multi Inject 20 robot / Operating hours: approx. 18,000 h in automatic mode Year of construction: 2017 Injection unit: Screw diameter: 30 mm Injection weight: approx. 100 g Injection pressure: 2400 bar Dosing volume: 113 ccm Clamping unit: Clamping force: 140 t Distance between tie bars: 0x0 mm Hfsdezy Iqhepfx Aftel Size of the clamping platens: 750x750 mm Ejector: hydraulic Clamping unit: hydraulic Control: CC 300 - touch screen Additional equipment: 2K injection molding machine with rotary table and robot Tie-bar-less machine, hybrid: energy-saving, high-speed and very quiet Very good technical condition Operating hours: approx. 18,000 in automatic mode Total number of operating hours: 25,369 h Euromap 67 Robot interface Air valve x 8 Hydraulic core pull x 5 Control unit with hot runners x 16 Reinforced injection units - bimetal Main motors - 2 x servo motor controlled with inverter Proportional valves on injection units - precise spraying Parallel movements Built-in pressure quality control system from Sensor Kistler - mold pressure measurement Screw diameter in the vertical injection unit: ⌀25 mm - approx. 58 g/hp It is possible to purchase the original Foboha turntable for an additional charge Turntable diameter: 740 mm Sepro Multi Inject 20 robot Year of construction: 2017 3-axis robot: 3 axes are driven by servo motors (electric): X, Y, Z (telescopic) Travel distances in axes approx.: X-4000, Y-1200, Z-1500 Automatic axis lubrication Touch control panel The safety package for robots Robot with adapter and protective housing Purchase of the robot for an additional charge Dimensions Weight: 10300 kg Length/width/height: 5.56x1.76x3.46 m All offered machines are started by our service technicians before sale. It is possible to obtain a video of the technical tests of the selected machine or participate in live technical tests at our company in Łódź. Price: On request

Condition: good (used), Year of construction: 2002, functionality: fully functional, Clamping force: 500 kN Platen size: 540 x 540 mm Tool opening stroke: 350 mm Minimum tool mounting height: 200 mm Hfedpfx Afjzg T I Sjtel Screw diameter: 30 mm Injection pressure: 2025 bar Displacement volume: 74 cm³ Opening width: 500 mm Ejector stroke: 100 mm Total weight: approx. 2,300 kg

Condition: ready for operation (used), Allmatic NC 125 High-Pressure Vice Jaw width: 125mm Clamping width: 214mm With base plate for vertical work. Total length without base plate: 450mm Total length with base plate: 505mm Hsdpfxjwc At Ee Aftjfl Height: 145mm You are welcome to come by for a viewing. We are happy to arrange a cost-effective shipping service for you. You will receive a proper invoice. For international customers, a net invoice can also be issued. A valid VAT identification number is required. Subject to prior sale. Visit our shop and check out our other offers. The company names and trademarks mentioned are the property of their respective owners and are used solely for identification and description purposes. Deviations from technical specifications and errors in the description of the item may occur and are reserved.

Condition: excellent (used), Year of construction: 2011, Cronoplast S.L. BabyPlast 6/10 Vp-T⌀12 / Production line with robot, rotary table, and additional automation Year of manufacture: 2011 Clamping unit: Clamping force: 6.25 t Clamping unit: hydraulic Control system: BABYPLAST - Touchscreen Additional equipment: Production line with robot, rotary table, and additional automation Vertical injection molding machine Air valves Injection for mold separation Automatic adjustment of the injection unit setting (up - down) The rotary table is driven by a servo motor, which is controlled via an inverter – very precise Automatic parts feeding with quality control system Machine work area protection with safety package Dimensions: Weight: 350 kg Length/Width/Height: 0.70 x 1.00 x 1.65 m All machines offered are started up by our service technicians before sale. It is possible to obtain a video of the technical tests of the selected machine or to participate in live technical tests at our company in Łódź. Hfodpfxozy H Rgs Aftsl

Condition: ready for operation (used), Year of construction: 2016, functionality: fully functional, turning height: 2,200 mm, turning diameter: 4,000 mm, faceplate diameter: 3,100 mm, table diameter: 3,100 mm, workpiece diameter (max.): 4,000 mm, FULLTONTECH CK5240 CNC vertical turret lathe, year of construction 2016. The machine was purchased new by us in 2016 and is offered for sale by the first owner. It is equipped with a Siemens control and has a double turret: one side CNC-controlled, the other side manually operated. Technical data: - Faceplate / chuck diameter: 3,100 mm - Max. internal clamping / turning diameter (X): 4,000 mm Hodpez Anr Dsfx Aftofl - Machining capacity (Y): 2,200 mm - Control: Siemens - CE marked Well maintained, in full working order and ready for immediate delivery.

Condition: good (used), Year of construction: 2001, functionality: fully functional, power: 9 kW (12.24 HP), pressing force: 125 t, stroke length: 220 mm, throat depth: 410 mm, total length: 4,200 mm, total width: 2,400 mm, total height: 2,500 mm, overall weight: 10,500 kg, controller manufacturer: CYBELEC, controller model: DNC 800, working width: 3,050 mm, distance between stands: 2,610 mm, control type: CNC control, back gauge adjustment: CNC-controlled, number of axes: 8, type of crowning: CNC-controlled, Equipment: CE marking, documentation/manual, lower tooling, upper tooling, Hydraulic crowning Hfsdpfx Aswrx Tmeftol CN CYBELEC DNC 800 CN axes: Y1/Y2/X1/X2/Z1/Z2/R1/R2 Hydraulic clamping of punches Segmented tooling MACHINE OFF GROUND Specifications Bending length: 3050 mm Power: 125 tons Throat depth: 400 mm Distance between uprights: 2610 mm Ram stroke: 220 mm Machine dimensions L x W X H: 4200 x 2400 x 2500 mm Weight: 10500 kg Year: 2001 Main motor power: 9 kW

Condition: excellent (used), Year of construction: 2012, Arburg 520H 1500-800 e² / Hybrid Machine / Production Line with Side Robot Arburg Multilift H Year of manufacture: 04.2012 Injection Unit: Screw diameter: 55 mm Shot weight: 434 g Injection pressure: 1650 bar Dosage volume: 474 ccm Clamping Unit: Clamping force: 150 t Tie bar distance: 520x520 mm Platen size: 695x695 mm Ejector: electric Clamping unit: toggle lever Control system: SELOGICA - Touchscreen Additional Equipment: Hybrid machine: high-speed, energy-saving, and very quiet Control system with air valve Core pull control Hot runner control x 12 Injection unit hardened - bimetallic Main drive motor - servo motor with inverter - energy saving Injection unit driven by servomotor controlled by inverter Machine equipped with cylinder / battery with compressed nitrogen (additional charge for fast operation) Central lubrication Automatic mold height adjustment Kistler sensor - mold pressure regulation Hfodpfxszy I Nke Aftjl The injection molding machine was operated in a so-called "cleanroom," and is fitted with extra protective devices against contamination and two vapor absorbers Side robot Arburg Multilift H Year of manufacture: 2012 5-axis robot: Z-axis driven by servo motor (electric); X, Y, and B axes (rotation) pneumatically operated Robot safety package Robot with adapter, conveyor belt with electric height adjustment, safety enclosure Purchase of robot and conveyor belt at extra cost Dimensions: Weight: 6,820 kg Length/Width/Height: 5.03x1.56x2.21 m All offered machines are started up by our service technicians before sale. It is possible to receive a video of the technical tests of the selected machine or to participate in live technical tests at our facility in Łódź. Price: On request

Condition: used, functionality: fully functional, Year of construction: 2019, load capacity: 1,300 kg, Cardboard clamp Load center: 600 ISO class: ISO Class 2 = 1,000 - 2,500 kg Condition: Ready for use and fully functional Technical condition: good Description: Year 2019 ISO 2A (41 cm) Capacity 1300 kg / 600 mm Side shift Width 1150 mm Clamps 1270x1200 mm Opening range 440-1820 mm ID OS2021 Hjdpfx Aezlluujftofl

Condition: used, functionality: fully functional, Year of construction: 2019, load capacity: 1,300 kg, Cardboard clamp Load center: 600 ISO class: ISO class 2 = 1,000 - 2,500 kg Hfsdpfx Aszkw Tgsftsl Condition: Ready for use and fully functional Technical condition: good Description: Year 2019, ISO 2A (41 cm), Capacity 1300 kg / 600 mm, Side shift, Width 1150 mm, Clamps 1270x1200 mm, Opening range 440-1820 mm, ID OS2020

Condition: used, functionality: fully functional, Year of construction: 2019, load capacity: 1,300 kg, Cardboard clamp Hedpjzlluzsfx Aftofl Load center: 600 ISO class: ISO Class 2 = 1,000 - 2,500 kg Condition: Ready for use and fully functional Technical condition: good Description: Year 2019, ISO 2A (41 cm), Capacity 1300 kg / 600 mm, Sideshift, Width 1150 mm, Clamps 1270x1200 mm, Opening range 440-1820 mm, ID OS2022

Condition: used, functionality: fully functional, Year of construction: 2019, load capacity: 1,300 kg, Cardboard clamp Load center: 600 ISO class: ISO Class 2 = 1,000 - 2,500 kg Condition: Ready for use and fully functional Hfedpfezllu Iex Aftjl Technical condition: good Description: Year 2019, ISO 2A (41 cm), Capacity 1300 kg / 600 mm, Side shift, Width 1150 mm, Clamps 1270x1200 mm, Opening range 440-1820 mm, ID OS2023.

Condition: used, functionality: fully functional, Year of construction: 2019, load capacity: 1,300 kg, Cardboard clamp Load center: 600 ISO class: ISO class 2 = 1,000 - 2,500 kg Condition: Ready for use and fully functional Technical condition: good Hfodpfszllvfox Aftjl Description: Year 2019 ISO 2A (41 cm) Capacity 1300 kg / 600 mm Side shift Width 1150 mm Clamps 1270x1200 mm Opening range 440-1820 mm ID OS2025

Condition: excellent (used), Year of construction: 2010, Arburg 470H 1000-400 e² / Hybrid Machine / Production Line with Arburg Multilift Select Robot Year of manufacture: 09.2010 Injection unit: Screw diameter: 40 mm Shot weight: 184 g Injection pressure: 2000 bar Dosage volume: 201 ccm Clamping unit: Clamping force: 100 t Tie bar spacing: 470x470 mm Platen size: 637x637 mm Ejector: electric Clamping unit: toggle lever Control: SELOGICA - Touchscreen Additional equipment: Hybrid machine: energy efficient and very quiet Euromap 67 Robot interface Air valve x 4 Hydraulic core pull x 1 Hot runner control x 12 Hardened injection unit - Bimetal Main motor of the machine - Servo motor with inverter drive - energy saving The injection unit is driven by a servo motor controlled by an inverter Machine equipped with cylinder/bottle with compressed nitrogen (additional load for fast operation) Central lubrication Integrated sorting flap Hfsdpfezy Iz Tjx Aftsl Arburg Multilift Select robot 6kg transverse Year of manufacture: 09.2010 4-axis robot: 3 axes driven by servo motors (electric); C-axis - pneumatic Travel paths in axes: X-400, Y-600, Z-1800 Robot with adapter, conveyor belt, and safety enclosure Purchase of robot and conveyor belt at extra cost Dimensions: Weight: 5180 kg Length/Width/Height: 4.40x1.56x2.02 m All machines offered are started by our service technicians before sale. It is possible to obtain a video of the technical tests of the selected machine or to participate in live technical tests at our company in Łódź. Price: On request